Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
91～105 item / All 333 items
The Washington Air Meter C-280 is a device for measuring the air content in fresh concrete, and it allows for easy direct reading of air content, enabling accurate testing.
It is made of special lightweight alloy, making it convenient to handle and strong against acid and alkali. *It is made of special lightweight alloy and has a capacity of 7L.
This is a hardness tester for rubber and plastics that can measure soft plastics, rubber, synthetic rubber, silicone, vinyl, felt, leather, and more.
A pocket-sized durometer can primarily measure softer rubber and plastic.
It can be used for soil profile measurements as it directly indicates important engineering properties such as soil compaction strength, shear strength, and cohesion in situ.
- It directly indicates important engineering properties such as soil compaction strength, shear strength, and cohesion in situ, making it useful for soil profile measurements. - Reliable data can also be obtained for determining the bearing capacity and stability of the subsoil.
This is a thermometer that can measure temperature non-contact using an infrared radiation thermometer, and can be connected to various types of K-type thermocouples to accommodate a wide range of temperature measurements.
The measured temperature is displayed on an easy-to-read LCD with a backlight, showing temperatures in 0.1°C increments (ranging from -9.9 to +199.9°C). The non-contact temperature can have its emissivity adjusted between 0.01 and 1.00 to match the measured object, and the distance coefficient is 11:1 to ensure accurate measurements of distant objects. It can display the maximum temperature, minimum temperature, the deviation between the maximum and minimum temperatures, and the average value during measurement. For food factories, we can also deliver the Raytemp set, which includes a piercing temperature sensor and probe disinfecting wipes (70 pieces) in a hard case. *Please choose either the Raytemp (with a 1m bare wire sensor) or the RayTemp set (with a piercing temperature sensor, probe disinfecting wipes (70 pieces), and a hard case) from the options below.*
You can measure the moisture content of copy paper and cardboard base paper.
You can measure the moisture content of copy paper and cardboard base paper. Additionally, the HK-300 series offers three models depending on the measurement target and application: HK-300-1 with grip sensor, HK-300-2 with conductive rubber sensor, and HK-300-3 with constant pressure sensor.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper.
Moisture measurement can be performed on kraft paper, liner paper, and copy paper. Additionally, the HK-300 series offers three models based on the measurement target and application: - HK-300-1 with grip sensor, - HK-300-2 with conductive rubber sensor, - HK-300-3 with constant pressure sensor.
The Yamamoto-type soil hardness meter is an instrument that measures soil hardness, which is one of the physical properties of soil.
When a cone is pressed vertically into a flat-cut cross-section, both the depth of cone penetration and the corresponding soil reaction force (spring compression) are measured simultaneously as variables, from which the theoretical hardness value (kg/cm²) is calculated. Due to this unique principle, a wide range of hardness from soft soils to soft rocks can be accurately measured in a matter of seconds. Additionally, it can be universally applied to general soft materials other than soil.
By adopting a notch filter, noise is reduced. This device detects weak leakage sounds and identifies leaks by confirming and comparing them with sound and numerical values.
The sound of water leakage is characterized by various noises and a mixture of complex sounds. Human hearing plays a significant role in this judgment. Consequently, devices have been developed that aim to capture sounds as close as possible to leakage sounds or to assess sounds using meters. The HG-10A incorporates both of these functions. In recent years, water leakage in main drainage pipes has decreased due to pipe renovation projects, achieving a high level of effectiveness. In contrast, minor leaks in water supply pipes and within buildings have increased, making investigation work very challenging. This device detects such weak leakage sounds and identifies leaks by confirming and comparing sounds and numerical values. Sensors and filters have been adjusted to be particularly suitable for detecting leaks in water supply pipes such as VP pipes and polyethylene pipes. It employs an "easy-to-read meter" and a "filter that allows for easy-to-hear sounds," enhancing the detection efficiency of the device.
Low-speed measurement can instantly measure speeds from 8 km/h to 322 km/h. It can be used as a speedometer for low-speed vehicles at construction sites and factories.
A function has been added to reduce noise, such as electromagnetic waves, which can cause malfunctions, allowing for more reliable measurements. It can be used for speed measurement of slow vehicles in environments prone to noise, such as construction sites, factory premises, and game centers.
The HD-100-2 and HD-100-4 are handheld stroboscopes designed for low-speed applications and increased light output.
We have achieved a compact, lightweight, high-precision, and high-brightness product at a low price. It is designed specifically for low-speed ranges. The light output has been increased, making it much easier to see. The charge and discharge capacitor capacity has been doubled and quadrupled, respectively (compared to the HD-100 model). The HD-100-2 has a speed range of 50 to 5,000 rpm, while the HD-100-4 has a speed range of 25 to 2,500 rpm. *Please choose one from HD-100-2 (speed range: 50 to 5,000 rpm) or HD-100-4 (speed range: 25 to 2,500 rpm).
This is a stroboscope of type CS-100 that automatically switches the light intensity to three levels based on the emission cycle, providing three times the light output.
This is a very useful feature when the target rotation speed range is wide.
This is an easy-to-use domestic water leak detection device that combines a newly developed compact high-performance microphone with a higher-end digital amplifier.
It is equipped with a microprocessor that automatically eliminates noise.
This is a dedicated device for measuring light wind speed, a single-function anemometer. Measurement range: wind speed 0.05 to 2.00 m/s (1 range).
Simultaneous analog output is also possible, allowing for a wide range of applications beyond air conditioning. *Please note that this product requires adjustment in combination with the main unit when replacing the sensor (considered a repair). An additional adjustment fee will be required on top of the price for the sensor probe alone.*
It is easy to separate from the display section with certification.
It supports a 3-way power supply: rechargeable battery, AC adapter, and dry batteries (dry batteries are not included). *This device has received type approval.* *Please choose the type according to your needs.* - PB-30 (capacity 15/30kg) - PB-60 (capacity 30/60kg) - PB-150 (capacity 60/150kg)
This is a soot concentration meter that evaluates the smoke density of combustion exhaust gases and checks combustion efficiency.
By drawing in combustion exhaust gases, we compare the smoke and smoke scale adhered to the filter paper to identify the smoke density. It can be used with all oil burners and can accurately measure smoke density within one minute. It is widely accepted as a world standard method for smoke testing of oil burners and has gained trust through years of proven performance in the burner industry.
