Probe Tester Product List and Ranking from 4 Manufacturers, Suppliers and Companies

The fastest in-circuit test! What are the features of a flying probe tester?

The Takaya APT series is a board inspection device capable of industry-leading ultra-fast in-circuit testing.

The Takaya APT series is a flying probe in-circuit tester that boasts overwhelming performance with the world's top market share, capable of detecting all defects on printed circuit boards through ultra-fast inspection. An in-circuit tester is a device that inspects the reliability of electrical connections between components and the board. By applying signals smaller than the operating current, it can identify defective areas and detect incorrect constants without damaging the components or the board. It is characterized by its ability to discover electrical defects that cannot be found through visual inspection (AOI), thereby enhancing quality assurance levels and making it easier to gain customer trust. The latest APT series has achieved a probe movement speed increase of up to 1.5 times compared to previous models, thanks to improvements in high-speed drive motors and communication control, enabling high-speed inspections with a minimum step of 0.02 seconds. This reduces inspection time by more than 30% compared to previous models, contributing to further reductions in inspection costs. Trial/testing consultations are also available. If you have any issues with inspecting printed circuit boards, please feel free to contact us. *For detailed information, please refer to the catalog.*

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Replacement of Fixture-type In-Circuit Tester

No need for jig creation, reducing running costs by over 90%!

We would like to introduce a case where a flying probe tester was implemented as a replacement for a fixture-type (press-type) tester. *Challenges - In the case of high-density mounted boards, there were components that could not be inspected with a fixture-type tester due to the difficulty of creating fixtures in narrow areas. - For low-volume production, such as maintenance parts after mass production, the cost of fixtures became high, increasing the overall cost burden, including maintenance. - There was a need to secure storage space for fixtures, which also added management hassle. *Implementation Effects - Components with narrow pitch that could not be inspected with fixtures can now be tested, enhancing reliability. - The need for fixture production has been eliminated, and there are no longer any running costs associated with maintenance. - Storage space for fixtures is no longer required, eliminating management hassle. For more details about the flying probe tester, please download the PDF catalog or feel free to contact us.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Are you having trouble with automatic LED light emission inspection?

Measure the emission color/brightness of LEDs quantitatively with a unique color sensor!! 【LED Color Test System】

Are you struggling with the labor involved in inspecting the LED's emission color and brightness? Takahashi's flying probe tester has an optional feature that allows for the measurement of LED emission color and brightness using a color sensor. We have examples of cases where visual inspections have been switched to inspections using the flying probe tester. Here are the actual benefits of implementation: 1: Zero burden on visual inspectors Directly looking at the LED's emission color can damage the operator's eyes, but switching to the flying probe tester can eliminate this burden. 2: Clarification of measurement standards Visual inspection can lead to variability in judgment criteria among inspectors. However, inspections using a color sensor have clear judgment criteria based on numerical comparisons, allowing for stable inspections. 3: No need for jig manufacturing costs In the case of LED inspections with the flying probe tester, there is no need to create dedicated jigs. We welcome inquiries for trials and tests. If you have any concerns, please feel free to contact us.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leave the introduction of flying probe testers to overseas markets to us!!

Implemented in over 46 countries!! Takaya's tester is recognized worldwide.

Introducing Flying Probe Testers to overseas bases / Please leave the local setup to Takaya. Takaya has entered into a distribution agreement with Itochu Corporation for overseas sales, establishing sales and service bases in the United States, Europe, China, and Southeast Asia, with numerous sales achievements in over 46 countries. Please make use of Takaya's Flying Probe Testers, recognized not only in Japan but also by companies and industries around the world. *For more detailed information, please refer to the related link page below.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introducing the history of Takaya Flying Probe Testers that are active around the world.

Implemented in numerous global EMS companies and manufacturers in over 46 countries!!

Takaya is a leading company in the PCB inspection machine industry, boasting the world's top market share in flying probe testers. After developing the world's first flying probe tester in 1987, it was showcased at a technology exhibition in Germany in 1988. It received high praise from the local electronics industry, which led to the start of its expansion into the European market. In 1990, sales began in the United States, another industrially advanced country. In 1995, it was awarded the "TEST INNOVATION OF THE YEAR," a prize given to the most innovative inspection machines, further recognizing its performance worldwide. Currently, Takaya has established sales and service bases in the United States, Europe, China, and Southeast Asia, with numerous sales achievements in over 46 countries. To meet the high demands from various manufacturers, new models and groundbreaking features are continuously being added, and the sales network continues to expand. If you have any issues with electrical testing of PCBs, please feel free to contact Takaya.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fastest in-circuit testing! Case studies of flying probe testers.

The Takaya APT series is a board inspection device capable of industry-leading ultra-fast in-circuit testing. Here are some case studies.

■Inspection of mass-produced products By connecting to loaders/unloaders, automated and unmanned inspections are possible even for large lots. ■Inspection of small quantities of various types of substrates There is no need for dedicated jig manufacturing costs. While it is difficult to identify defective areas in function tests, they can be identified through in-circuit tests. ■Inspection of prototype substrates We can respond immediately to design changes. Function tests are also possible, such as applying voltage to the substrate to confirm circuit operation (ON/OFF) and measuring direct current. ■Implementation confirmation inspection during model switching We can reliably and quickly confirm the mounting program of the first lot and check for incorrect component sets on the mounter during model switching. ■Defect analysis inspection This can be used for inspecting substrates that failed functional tests or for defect analysis of substrates that failed in the market. It significantly reduces repair time and decreases the number of discarded substrates. Additionally, there are various other applications where Takaya testers have been utilized successfully. For more details, please contact your sales representative.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Collaboration with boundary scan testing using a flying probe tester.

We will create new value through the mutual complementarity of ICT and BST.

In-circuit testing with a flying probe tester excels at inspecting the electrical characteristics of implemented electronic components in analog circuits. However, components that cannot be probed make electrical testing difficult, and functional testing of digital circuits is challenging. On the other hand, boundary scan testing allows for quick interconnection testing between LSI pins and on-board programming for FPGAs, but it can only test digital circuits around ICs that comply with the boundary scan standard, and it also requires specialized fixtures for connections. At Takaya Corporation, we possess technology that uses flying probes instead of fixtures to connect 4 to 5 scan-compatible pins and measuring instruments required for boundary scan testing. This allows for boundary scan testing even when the counterpart of a boundary scan-compliant IC is a non-boundary scan-compliant IC or passive components (such as connectors) by enabling the flying probe to function as a virtual boundary scan cell. With a single flying probe tester, it is possible to conduct comprehensive testing of both digital and analog circuits, thereby significantly enhancing testing efficiency compared to before.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Implementation Technology Journal Electronics Implementation Technology Special Feature Article Published

We have received permission to publish the feature article that was included in the only domestic magazine specializing in implementation technology, "Electronics Implementation Technology." You can view it here.

Special Feature Content ■ Latest Trends in BGA Implementation Board Inspection Hybrid Inspection of Flying Probe Testers and JTAG Testing Andor System Support Co., Ltd. / Masayuki Taniguchi Takaya Co., Ltd. / Kohei Yanagida Overview BGA (Ball Grid Array) components are now used in all types of electronic devices, from consumer products to industrial equipment, and more recently, automotive devices. However, a reliable method for inspecting boards with BGA components (hereafter referred to as BGA implementation boards) has not been established. This is because every inspection method has its advantages and disadvantages, making it impossible to conduct a complete test using only one inspection method. Therefore, inspecting BGA implementation boards has become a challenge for many companies. In this article, we will introduce the latest technological trends in hybrid inspection that combines flying probe testers and JTAG (Joint Test Action Group) boundary scan as one solution to this issue. 1. Introduction 2. Inspection and Challenges of BGA Implementation Boards 3. Possibilities of Electrical Testing 4. In-Circuit Testing 5. JTAG Boundary Scan Testing 6. Hybrid Testing 7. Conclusion

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Introduction to the special feature article of the European electronics industry magazine "EPP"

The European electronics industry magazine "EPP" has published a feature article on Takaya's flying probe tester.

In the October 2023 issue of the European electronics industry magazine "EPP," an article introducing Takaya's flying probe testers has been published. Takaya Corporation and its European distributor, Cystec Europe, have maintained a long-standing partnership with Siemens in Germany. At Siemens' global flagship factory "SIEMENS Karlsruhe," 12 Takaya flying probe testers are currently in operation, ensuring the reliability of assembled circuit boards. The APT-1600FD-A achieves fully unmanned inspection 24 hours a day, 5 days a week through simultaneous inspection of both sides, automatic setup of inspection programs using new software, and automatic transport of circuit boards using an Autonomous Mobile Robot (AMR). Additionally, it supports the latest interface standards such as OPC UA, enabling integration with MES systems, as well as establishing an environment for monitoring operational rates and automatically switching inspection programs based on defect statistics. Please check the related links and download page for more information.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Low resistance measurement mode (0.1mΩ～) [Under development]

Introducing the Takaya Flying Probe Tester. We are challenging the measurement of low resistance (0.1mΩ and below).

At Takaya, in order to respond to further requests from our customers, we are advancing the development of a unique mode for the flying probe tester that adjusts the application parameters to measure lower resistance (0.1 mΩ and below). *Resolution: 0.001 mΩ Compared to handheld low-resistance meters, the flying probe tester has longer measurement lines (approximately 5 meters) from the measurement probes to the main unit, which necessitates machine design that takes external noise into account; however, we have expertise in this area. Additionally, when measuring with handheld probes, the force, angle, and position when contacting the measurement target are not consistent, which can lead to variations in measurement results and potential marks or damage to the object being measured. Our probe system is well-regarded for its damage-free contact and high-precision contact. If you have concerns such as wanting to eliminate the uncertainty of manual measurements or finding the measurement process too cumbersome, please feel free to reach out to us. We would be happy to accept test trials.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Exhibition Information] Introduction of Exhibited Products at the 38th Nepcon Japan

Thank you for visiting the 38th Internepcon Japan Electronics Manufacturing and Assembly Exhibition.

You can view information about the products exhibited on that day here. 〇 Industrial Equipment Division - Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) Unmanned continuous inspection linked with front and rear devices OPC-UA (OPC Unified Architecture) Linked with MES (Manufacturing Execution System) Real-time information collection and management of operational status 〇 RF Division / Solutions Division - RFID Outgoing Management System - RFID UHF Band Continuous Monitoring System - Work performance collection using RFID / Semiconductor IC Tag Reading - RFID × IoT Data Device "RFID Performance Collection System" - Easy replacement from barcode HID reader and key input tool

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

38th Electronics Packaging Society Spring Conference Presentation Materials Released

The presentation materials for the 38th Electronics Packaging Society Spring Conference are now available.

The 38th Electronics Packaging Society Spring Conference was held from March 13 (Wednesday) to 15 (Friday), 2024, at the Noda Campus of Tokyo University of Science. At this conference, Mr. Yanagida, the Technical Department Manager of Takaya Corporation's Industrial Equipment Division, gave a presentation on "The Latest Trends in Hybrid Testing Systems Combining JTAG Testing and Flying Probe Testers." The presentation materials from that session have been made available, so please take a look at the related catalog pages below. -------- Content -------- To ensure reliable assembly guarantees for printed circuit boards, electrical testing is essential. However, a single testing method alone does not provide sufficient test coverage. To address this issue, we introduce a hybrid testing system that integrates flying probe testers with JTAG boundary scan testing. By complementing each testing method, we can maximize the test coverage for high-density printed circuit boards, enabling more accurate fault diagnosis.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dual Side Flying Probe Tester APT-2600FD

A new innovation in substrate manufacturing. Achieving improvements in production efficiency and inspection accuracy!

The APT-2600FD is a next-generation dual-side flying probe tester that can perform combination testing with up to 6 probes using both upper and lower flying probes simultaneously. It improves test coverage while reducing the risk of product damage due to board flipping operations, significantly shortening inspection time. Equipped with a high-performance measurement system and a variety of features, it contributes to quality improvement from prototyping to mass production. We accept evaluation tests at our demonstration rooms in Okayama headquarters and Tokyo branch, where you can bring in your boards. A complete testing process is possible, including the creation of inspection programs, testing using actual boards, and summarizing evaluation results. *For more details, please feel free to contact us.*

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flying Probe Tester APT-2400F / 2600FD

2025 Electronics Packaging Society Technical Award Winner!" "55th Mechanical Industry Design Award IDEA Winner!

Takaya Corporation has announced a new model of its flying probe tester, the "APT-2400F/APT-2600FD series," which reliably detects various defects in printed circuit boards through ultra-high-speed inspection. Equipped with cutting-edge inspection technology that can check the placement and connections of fine components with high precision, it ensures that even minor defects and risks are not overlooked, strongly supporting the improvement of product quality. Additionally, thanks to the company's unique control mechanisms and sensing technology, reliable inspections can be achieved even in fluctuating environments, contributing to quality management by reducing recall risks. Furthermore, it features a user-friendly interface that anyone can intuitively operate, helping to alleviate burdens in workplaces where labor shortages are becoming serious, while still ensuring high inspection accuracy and contributing to increased productivity. *For more details, please download the PDF document or feel free to contact us.*

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] The Importance of Electrical Testing in EMS Companies

Takahashi's flying probe tester solves the challenges faced by EMS companies.

【Implementation Results for EMS Companies】 - By conducting electrical inspections from the prototype stage of the circuit board, we achieve quality assurance before mass production. - Early optimization of circuit board design and component selection contributes to the reduction of defects in later processes. 【Challenges Faced by Customers】 Cost of Recreating Jigs: With jig-based testers, it is necessary to recreate dedicated jigs every time there is a prototype or design change. Each design change requires modifications to the jigs, significantly increasing costs and time. Insufficient Response to Design Changes: Conventional inspection methods make it difficult to respond flexibly to design changes. There were instances where long lead times made rapid verification during the prototype stage challenging.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Inspection of Large PCBs for Medical Devices

Please utilize Takaya's flying probe tester for the inspection of large substrates for medical devices (in conjunction with boundary scan).

By combining visual inspection, non-contact scanning, and physical probing, we meet the stringent reliability standards in the medical device field, achieving both quality improvement and cost reduction. 【Implementation Achievements】 - Achieved full inspection in inline testing, ensuring product quality. - Enhanced defect detection capabilities for large substrates and complex design boards through collaboration with boundary scan technology. 【Challenges Faced by Customers】 Limitations of APT alone: Flying probe testers excel in electrical characteristic testing, but physical access for probing is difficult for components with hidden pin connections, such as BGA and QFP. In high-density substrates, there are areas that cannot be fully covered by probing alone. Constraints of AOI: Cannot detect defects (such as solder bridges or connection failures) located beneath BGA or large components. Internal connections and micro shorts in multilayer substrates cannot be detected. In large substrates, areas beyond the field of view occur, making it difficult to efficiently inspect the entire area. Challenges with large substrates and complex designs: In large substrates, inspection time tends to increase for both AOI and APT, leading to decreased productivity. Full inspection of high-density mounted substrates requires an efficient inspection system that combines physical probing and non-contact inspection.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] PCB Inspection for Lighting (LED Lighting)

Please utilize Takaya's flying probe tester for substrate inspection for lighting (LED lighting).

By utilizing color sensors for automated inspection, we overcome the limitations of visual inspection and achieve quality stabilization and efficiency. Automation reduces the burden on operators and establishes consistent inspection standards, balancing improved product reliability with cost reduction. 【Implementation Achievements】 - Transition from visual inspection to automated inspection. - Achieved quality stabilization through precise automated inspection using color sensors. 【Challenges Faced by Customers】 Operator Burden: Visual inspection relies on the skills and experience of operators, leading to issues such as fatigue and decreased concentration during long hours of work. As the burden on operators increases, the risk of decreased inspection accuracy rises. Variability in Judgment Criteria: Visual inspection involves subjective judgments by individuals, resulting in variability in quality standards. Inconsistent judgments can lead to the outflow of defective products and excessive inspection. Difficulty in Confirming LED Characteristics: Determining fine characteristics such as the color and brightness of LEDs is challenging through visual inspection. Inspections based on accurate numerical standards are required.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We have been featured on the official website of i-PRO Co., Ltd.

Visualizing the internal state of the equipment. Streamlining maintenance support with high-definition network cameras.

We are pleased to announce that Takaya Corporation's case study has been featured on the official website of i-PRO Co., Ltd. At our company, we have been addressing the challenge of developing a flying probe tester that allows for remote monitoring of the internal conditions of the device, thereby facilitating a swift initial response in the event of a problem. To solve this issue, we have equipped our latest models, the APT-2400F and APT-2600FD, with i-PRO Co., Ltd.'s network cameras as standard. By incorporating the cameras, we can monitor the internal state of the device in real-time, which has led to faster troubleshooting and enhanced quality control in the inspection process. In this case study, we provide detailed insights from the perspective of the development team regarding: - The background leading to the standard inclusion of cameras - The reasons for product selection - Operational innovations - The effects of the integration Please check the related link below for more information.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Exhibition] Introduction of Exhibited Products at the 40th Nepcon Japan

New model flying probe tester - APT-T400J - first public unveiling in Japan, joint exhibition of all business divisions (industrial equipment, RF, solutions, EMS).

Takaya Corporation will exhibit at the "40th NEPCON Japan - Electronics Development and Manufacturing Expo" to be held at Tokyo Big Sight from January 21 (Wednesday) to January 23 (Friday), 2026. <Industrial Equipment Division> 【New Model】Flying Probe Tester <APT-T400J Series> 【High-End Model】Flying Probe Tester <APT-2600FD Series> *The new model "APT-T400J" will be unveiled for the first time in Japan. <RF Division / Solutions Division> Visualizing worker performance and location with RFID No inventory required! Real-time constant monitoring <EMS Division> - A manufacturing line that integrates systems and automation technology to achieve labor-saving, high-quality, and low-cost production. When entering this exhibition, please proceed to the URL below and register for a "Visitor Badge." https://www.takaya.co.jp/fa/news/event/nepcon2026/ We sincerely look forward to your visit. Product demonstrations are also planned at our exhibition booth, so please stop by.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Report on Participation in the 40th NEPCON Japan Exhibition

We exhibited at the "40th [Tokyo] Nepcon Japan Electronics Manufacturing and Packaging Exhibition" held at Tokyo Big Sight.

During the event, I was invited to the 40th anniversary party of Nepcon Japan, where I received an award for long-term continuous participation. I sincerely thank everyone for their ongoing support and consideration. This time, the Industrial Equipment Division, RF Division, Solutions Division, and EMS Division jointly exhibited for the first time, showcasing a total solution that can support everything from development to mass production, including board inspection, RFID, software, and contract manufacturing. If your company is interested in "updating existing equipment," "improving inspection processes," "automating production lines," or "outsourcing EMS," please feel free to contact us. We will propose the best solutions for your manufacturing needs.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

In-circuit test flying probe tester FA1240

An in-circuit tester that drastically reduces running costs and data creation time by eliminating fixtures, with a defect viewer that indicates defective areas like image inspection.

A flying probe type in-circuit tester that does not require fixture manufacturing reduces pseudo-errors caused by poor contact and improves one-pass rates. - It is a high-speed, high-precision, and highly reliable inspection machine suitable for small-lot, multi-variety testing of mounted circuit boards. With its four-terminal measurement capability, it can detect not only lifted IC leads but also pseudo-contact detection of electrically conductive connections. - Furthermore, it enables active testing of FETs, relays, and three-terminal regulators, which were difficult to test with conventional methods. Optional tests allow for simple function measurements, boundary scan measurements, and frequency measurements of crystal oscillators.

Company：日置電機
Price：10 million yen-50 million yen

Circuit Board Inspection Equipment
Probe Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Do you want to electrically detect IC lead lift and BGA ball lift?

TAKAYA's unique IC open test system

*You can view detailed features in the catalog.* The TAKAYA flying probe tester is equipped with a system that uses a uniquely developed sensor probe to quickly detect issues such as lifted leads and solder defects in ICs like BGA, QFP, and SOJ. It can electrically detect lifted lead defects in narrow-pitch ICs and ball lift defects in BGAs without damaging the IC itself. We welcome inquiries for trials and tests. If you have any concerns, please feel free to contact us. *You can view detailed information in the catalog.*

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We were featured in the European industry magazine PRODUCTRONIC!!

Introduced to numerous global EMS companies and manufacturers in over 46 countries!! It is Takaya's flying probe tester, which has received high acclaim worldwide.

In the February issue of the industry information magazine "PRODUCTRONIC 2021," published in Europe, we featured an article about the introduction of our testers at a major sensor manufacturer. This manufacturer handles approximately 10 million printed circuit boards and 800 million components annually and has been using Takaya's flying probe testers for about 20 years. This article includes comments from when they introduced the latest model, the APT-1600FD series. They conduct in-circuit testing directly after the PCB assembly process, which allows for very quick and reliable error detection. They also praised the ease of modifying inspections simply by adjusting the program, even if the assembly content changes during development. By eliminating the need for fixture creation, cost-effectiveness has increased, and they achieved inspection speeds approximately 2 to 2.5 times faster compared to using fixture-based testers. We encourage you to utilize Takaya's flying probe testers, recognized not only in Japan but also by companies and industries around the world. *For more detailed information, please refer to the related link page below.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The flying probe tester from Takaya, recognized by the world. What is the reason for that?

Introduced in over 46 countries worldwide with trust and innovation. The best partner for inspections that meets the needs of all environments, from small-scale prototypes to mass production.

Industry-Leading Know-How Takaya has established a flexible inspection system capable of handling everything from small-scale prototypes to mass production. With years of experience and proven results, we achieve high precision and low costs in all types of circuit board inspections. Continuously Evolving Innovation We constantly anticipate the needs of the times, striving to improve inspection speed and explore new inspection areas. Our product development, which combines high quality, technological innovation, and flexibility, supports an industry characterized by rapid change. Trusted "Made in Japan" Quality All equipment is manufactured in Japan. Under strict quality control, we maintain long-term precision and stability, excelling in fields that require high reliability, such as aerospace, medical, and automotive. Global Support System From installation and training to regular maintenance and inspection program creation, our specialized staff provides consistent support. As your inspection partner, we support manufacturing sites around the world. Track Record: Over 46 Countries Worldwide Takaya's flying probe testers have been introduced in over 46 countries, including Asia, Europe, and North America. Their reliability and flexibility are the reasons they are chosen by global companies.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fastest in-circuit testing! The benefits of introducing flying probe testers.

The Takaya APT series is a board inspection device capable of industry-leading ultra-high-speed in-circuit testing. Here, we introduce its implementation benefits.

■ Quality Improvement By detecting defects that are difficult to identify through visual inspections and functional tests, we can enhance the overall quality of the implementation process based on test results and aggregated data. It is also capable of pin contact with microchip components and fine-pitch ICs/connectors, significantly improving detection rates in high-density board inspections compared to fixture inspections. ■ Inspection Cost Reduction There is no need for expensive dedicated inspection fixtures, which greatly reduces inspection costs for prototype boards and small to medium production boards. In the event of design changes, there are no costs for modifying fixtures. ■ Reduction in Defect Analysis Time Since defective areas can be identified (defective areas are displayed on the board image), defect analysis and component replacement tasks become easier, significantly shortening repair time. ■ Traceability Management Measurement values of components and inspection dates are saved for each board inspection, allowing for easy searching and editing as quality control documentation. ■ Reduction in Line Downtime Waiting time until mass production starts is significantly reduced, improving the operational efficiency of the implementation process. It alleviates the burden on operators from LCR meter measurements and visual inspections, eliminating human errors. For more detailed information, please contact your sales representative.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Takaya's unique 4-head & 6 flying probe system (vertical drop)

Takahashi Flying Probe Tester expands its defect detection capabilities with a unique system!!

This system allows for the addition of two vertical probes to the standard four inclined probes, enabling contact with points that were previously inaccessible, such as contact points between high components, vias, through-holes, and upward connectors, thereby enhancing defect detection capabilities. To select the optimal contact method according to the shape of the object being inspected, several types of probes with different tip shapes are available. Furthermore, by adding a dual Z-axis option that automatically switches between two different vertical probes according to the inspection program, manual probe replacement becomes unnecessary, allowing for more efficient inspections.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Initial Confirmation, Inspection Check during Line Switch

You can automate the application of double-sided tape on test boards and the initial inspection of assembled boards right after the start of assembly.

In the component mounting process of printed circuit boards, mistakes due to incorrect component sets or implementation program errors during model changes in the mounter equipment can lead to defects on a lot basis (lot out) if discovered late, resulting in significant losses. To prevent such mistakes, there are cases where components are temporarily mounted on a bare board with double-sided tape, and each one is measured and visually inspected with an LCR meter. This inspection is referred to as "first machine check," "setup change check," or "trial run inspection," but it requires the line to be stopped until the inspection is completed, which takes time and can reduce line operating rates. Additionally, when manually checking all small components on a densely mounted board, it is difficult to completely eliminate human error. Our company recommends automatic inspection using a flying probe tester as a method to make this task easier and more efficient. This allows for accurate and quick confirmation work after line changes. Customers considering improvements in operating rates through reduced switching times of mounting machines, reduced labor costs, and decreased risks of defective products are encouraged to consider implementation.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Exhibition] Introduction of Exhibited Products at the 37th Nepcon Japan

[Exhibition Panel Release] Flying Probe Tester (Circuit Board Inspection Equipment) that detects defects in implemented circuit boards with ultra-fast inspection; RFID products that contribute to business reform.

Thank you to everyone who visited our booth at "The 37th Internepcon Japan," held at Tokyo Big Sight from January 25 (Wednesday) to 27 (Friday), 2023. We have made the materials and display panels of our exhibited products available. Even those who could not attend the venue during the event can register on this page to view the materials, so please take advantage of this opportunity. This time, in collaboration with Andor System Support Co., Ltd., our Industrial Equipment Division conducted a demonstration of boundary scan testing using a flying probe tester, and we are pleased that many customers showed interest in this. Additionally, this was the first collaborative exhibition between the Industrial Equipment Division and the RF Division, and we believe that many people were able to learn about our products. Moving forward, Takaya Corporation will continue to strive to meet our customers' expectations. We sincerely appreciate your continued support.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

We also accept special custom requests for flying probe testers.

We manufacture original units capable of automatically transporting large heavy substrates weighing up to 30 kg. Please feel free to entrust us with custom specifications as well.

At Takaya, we also accept special custom requests for flying probe testers to meet our customers' diverse needs. As an example, in response to the request to "automatically transport large and heavy boards weighing up to 30 kg," we have developed a dedicated automatic transport unit. Even very heavy boards that are difficult to carry manually can be handled safely and accurately. Additionally, to conduct special inspections alongside in-circuit testing, we have created space within the tester body to accommodate special inspection equipment, allowing for flexible customization. Even for inspections of special products that do not fit standard specifications, we can provide solutions through custom support. Please consult with our sales representative for more information.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Accelerating the inspection of flying probe testers using deep reinforcement learning.

We have published a joint research report with Ehime University.

Takaya Corporation is conducting joint research with the Graduate School of Science and Engineering at Ehime University on accelerating the inspection of flying probe testers using deep reinforcement learning. At the Ehime University booth during the JPCA Show 2023 / 2023 Microelectronics Show held at Tokyo Big Sight from May 31 (Wednesday) to June 2 (Friday), we displayed and introduced a report on this research. You can download and view the report that was exhibited on that day from here. We encourage everyone to take a look.

Company：TAKAYA Corporation
Price：Other

Circuit Board Inspection Equipment
Probe Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Probe Tester Product List and Ranking from 4 Manufacturers, Suppliers and Companies | IPROS GMS