Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 71 items
We support a wide range of measurements from resin samples to ceramics.
We support a wide range of measurements from resin samples to ceramics, with a measurement range of -150°C to 1700°C. A variety of sample holders are available, and measurements can be conducted under a high-purity inert atmosphere due to the vacuum-sealed structure.
![Cutting-edge thermal analysis services [Strongly supporting research and development!]](https://image.mono.ipros.com/public/product/image/b44/2000250961/IPROS6624127702103176523.jpg?w=280&h=280)
We strongly support research and development with cutting-edge thermal analysis services! We are a world-class manufacturer of thermal analysis and thermal property equipment!
As the development of new substances and materials becomes more diverse and advanced, there is a challenge that traditional analysis methods alone cannot overcome the current situation. This is where "thermal analysis" brings new insights. NETZSCH, as a world-class manufacturer of thermal analysis and thermal property equipment, strongly supports your research and development by providing cutting-edge solutions. 【What can be understood with thermal analysis equipment】 ■ Melting glass transition ■ Thermal conductivity ■ Expansion rate ■ Elastic modulus ■ Thermal decomposition gas analysis *For details, please request materials or view the PDF data from the download.
The world's smallest class micro-Raman sensor. Achieves low cost through miniaturization and optimized design. Easily attaches to existing microscopes.
The "Raman EYE series" is an attachable micro-Raman sensor that boasts one of the smallest sizes in the world, measuring W120×D95×H50mm (excluding some models). It features an attachable design that allows for easy installation on existing microscopes in about one minute, enabling high-sensitivity measurements using Raman spectroscopy without the need for dedicated equipment. Additionally, its compact and optimized design allows for a starting price of 4.5 million yen. 【Features】 ■ Achieves one of the smallest sizes in the world ■ Can be attached to various microscopes ■ Easy to introduce at a low price (from 4.5 million yen) ■ Remote operation using tablets or smartphones is possible ■ Can be connected to a materials analysis platform utilizing generative AI (sold separately) *You can view the evaluation case collection from "PDF Download." Please feel free to contact us for inquiries.
"894 Professional CVS Analyzer" capable of multi-sample continuous automatic analysis by combining a sample changer and an electric burette.
This is a system that can automatically perform multi-sample analysis of organic additives in an electrochemical plating bath using the CVS technique (Cyclic Voltammetric Stripping).
Temperature-modulated DSC allows for specific heat measurements using the IS method, providing a wealth of information in high-temperature regions where specific heat measurements have been considered difficult, which cannot be obtained with conventional DSC.
Temperature-modulated DSC provides a wealth of information that cannot be obtained with conventional DSC, enabling the following: - Distinction of thermal history, etc., through comparison of reversible and irreversible components as mentioned above. - Measurement of specific heat in high-temperature regions above around 1000°C, which is considered difficult with the JIS method. - Measurement of specific heat in low-temperature regions below room temperature. Additionally, it is expected to be useful for analyzing relaxation phenomena. In this case, as an example of that technology, we introduce "a case study evaluating PET." For more details, please refer to the PDF materials. Furthermore, in addition to DSC, our company also specializes in various thermal analyses such as TG-DTA and TMA. ● DSC (Differential Scanning Calorimetry): Can be used for analysis of sample melting, glass transition, thermal history, crystallization, curing, Curie point, etc., and for measuring specific heat. ● TG-DTA (Thermogravimetric and Differential Thermal Analysis): Can be used for analysis of sample moisture content, ash content, decomposition, oxidation, and heat resistance evaluation. ● TMA (Thermomechanical Analysis): Can be used for measuring sample expansion rate, glass transition, softening point, etc. For more information, visit here: https://www.seiko-sfc.co.jp/analysis-service/thermal-analysis.html
![[Data DL available・DSC] Understanding the gelatinization of starch in rice, noodles, etc.](https://image.mono.ipros.com/public/product/image/813/2000766278/IPROS98637519284911439701.png?w=280&h=280)
In DSC, you can understand the gelatinization and aging of starch, which are important factors in food processing. Please fully experience this technology that can also be applied to other foods.
In starch processed foods, it is very important to understand the gelatinization (α phase) and the retrogradation (β phase) phenomena. Our company has the technology to grasp these phenomena using DSC (Differential Scanning Calorimetry). In this case, we introduce an example of this technology: "Understanding the gelatinization of starch in rice and noodles." Additionally, this technology can also measure the degree of retrogradation. For more details, please refer to the PDF materials. In addition to DSC, our company also specializes in various thermal analyses such as TG-DTA and TMA. https://www.seiko-sfc.co.jp/service/thermal.html ●DSC (Differential Scanning Calorimetry): It can be used for analyzing sample melting, glass transition, thermal history, crystallization, curing, Curie point, etc., as well as measuring specific heat. ●TG-DTA (Thermogravimetric and Differential Thermal Analysis): It can be used for analyzing moisture content, ash content, decomposition, oxidation, and evaluating heat resistance. ●TMA (Thermomechanical Analysis): It can be used for measuring sample expansion rate, glass transition, softening point, etc. There are other examples available, so please take a look. https://www.seiko-sfc.co.jp/case/index.html
Generally, it is possible to observe transition phenomena such as melting, glass transition, crystallization, and thermosetting of materials even in difficult low-temperature regions.
Depending on the material, glass transition, cryocrystallization, and melting points may exist in the low-temperature range. Our company has the technology to measure these characteristics using DSC (Differential Scanning Calorimetry). We hope you can utilize this technology to understand material properties. In this case, we introduce an example of this technology: "DSC Measurement of Silicone Rubber (Low-Temperature Measurement)." Please refer to the PDF document for details. In addition to DSC, our company also specializes in various thermal analyses such as TG-DTA and TMA. https://www.seiko-sfc.co.jp/service/thermal.html ●DSC (Differential Scanning Calorimetry): Can be used for analysis of sample melting, glass transition, thermal history, crystallization, curing, Curie point, etc., as well as measuring specific heat. ●TG-DTA (Thermogravimetric and Differential Thermal Analysis): Can be used for analysis of sample moisture content, ash content, decomposition, oxidation, and thermal resistance evaluation. ●TMA (Thermomechanical Analysis): Can be used for measuring sample expansion rate, glass transition, softening point, etc. Please take a look at many other examples below: https://www.seiko-sfc.co.jp/case/index.html
Photoluminescence and film thickness mapping measurement equipment for 2, 3, and 4-inch wafers for LED/LD production Wafer PL
Y Systems was established based on its achievements in measurement and evaluation technologies in research environments for blue laser diodes (LD) and light-emitting diodes (LED). In 2001, we commercialized the first unit of our current flagship product, the Y-Wafer Mapper, with our staff. We will continue to play a part in the cutting-edge technology of solid-state lighting.
[Video available] Compact and can be placed on a desk! Ideal for use in laboratories! Apply a hydraulic pressure of up to 35 tons to create highly uniform pellets from powdered samples!
The Cole-Parmer automatic press machine 'X-Press 3636' is a device that produces highly uniform pellets suitable for fluorescent X-ray analysis and infrared spectroscopy by applying a maximum pressure of 35 tons through an automatic hydraulic press. With program settings via a touch panel, it is easy to set detailed parameters for weight pressure, pressure holding time, and pressure release time. This allows for the creation of uniform samples. By using a dedicated die set, it ensures even pressure application on the samples, enabling appropriate sample molding for analytical measurements. Die set sample sizes: 13mm, 31mm, 35mm, 40mm.
Various analyses of DLC (Diamond-Like Carbon) are possible!
We will introduce the evaluation of the crystallinity, film thickness structure, hydrogen content, density, and hardness of DLC (Diamond-Like Carbon).
Ideal for outdoor spectral analysis due to its compact size! Outdoor use with tablet devices is also possible!
This product achieves compactness, allowing for spectral analysis to be conducted outdoors while being portable. Despite its small size, it achieves a signal-to-noise ratio of 5000:1, providing accurate data. It is a Wi-Fi compatible model, enabling operation at any time through a tablet device. Dedicated software is also available, which can be customized according to your desired measurement items. 【Features】 - Compact size makes it easy to carry outdoors - Achieves a 5000:1 signal-to-noise ratio despite its small size - Operable via tablet devices - Software that includes various measurement items can be provided according to your preferences For more detailed specifications, please download the catalog or contact us directly.
![[DL Available/Thermal Analysis] DSC Measurement of Chocolate 1 (Estimation of Crystal Type)](https://image.mono.ipros.com/public/product/image/904/2000738096/IPROS72935777499290402644.png?w=280&h=280)
DSC measurement allows for the understanding of the melting behavior of cocoa butter, the main component of chocolate. Please use it for texture discrimination and quality control of chocolate.
Differential Scanning Calorimetry (DSC) can be used for the analysis of sample melting, glass transition, thermal history, crystallization, curing, Curie point, and the measurement of specific heat. In this case, we introduce an analysis of chocolate, which is familiar to everyone, through "DSC Measurement of Chocolate 1 (Estimation of Crystal Type)." It is useful for distinguishing the texture (melt-in-mouth) of chocolate and for quality control, so please take a moment to read the PDF materials. In addition to DSC, our company also specializes in various thermal analyses such as TG/DTA and TMA. ● TG/DTA: Can be used for analyzing moisture content, ash content, decomposition, oxidation, and heat resistance evaluation. ● TMA: Can be used for measuring sample expansion rate, glass transition, and softening point. We also have a track record with other food products, so please feel free to consult us regarding thermal analysis. Case introduction https://www.seiko-sfc.co.jp/case/index.html *Other materials are also available. If you request through the inquiry button, we will send them to you.
![[DL Available/Thermal Analysis] DSC Measurement of Chocolate 2 (Comparison Between Products)](https://image.mono.ipros.com/public/product/image/fb2/2000738113/IPROS23611445353058178528.png?w=280&h=280)
By thoroughly scientifically analyzing chocolate, we can compare products from various companies.
Differential Scanning Calorimetry (DSC) can be used for analyzing the melting, glass transition, thermal history, crystallization, curing, Curie point, and measuring specific heat of samples. In this case, we introduce an analysis of familiar chocolate using DSC in "DSC Measurement of Chocolate 2 (Comparison Between Products)." This is the second installment. It is also useful for product comparison in determining the texture (melting) of chocolate, so please take a moment to read the PDF materials. In addition to DSC, our company specializes in various thermal analyses such as TG/DTA and TMA. ● TG/DTA: Can be used for analyzing moisture content, ash content, decomposition, oxidation, and evaluating heat resistance. ● TMA: Can be used for measuring expansion rate, glass transition, and softening point of samples. We also have experience with other food products, so please feel free to consult us regarding thermal analysis. Case Introduction https://www.seiko-sfc.co.jp/case/index.html *Other materials are also available. If you request through the inquiry button, we will send them to you.
