End Mills Product List and Ranking from 72 Manufacturers, Suppliers and Companies

End mill "Glass resin laminated material PCD end mill"

Developing PCD tools compatible with new materials!

Simultaneous processing of glass, a brittle material, and resin, a viscoelastic material, has been difficult. Our company has successfully shaped blades suitable for glass and blades suitable for resin within a single tool through microprocessing using ultra-short pulse lasers. 【Features】 ■ Realization of simultaneous processing of dissimilar laminated materials ■ Chipping of the glass layer below 10μm, no melting of the resin layer *For more details, please download the PDF or feel free to contact us.

Company：内山刃物
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Tool Manufacturer

Quantitative measurement of cutting is possible! We will listen to your requests and develop a testing plan.

We would like to introduce a case of machinability evaluation testing services requested by a tool manufacturer. The company requested a quantitative evaluation of their tools, an investigation into the causes of tool defects, and measurement of the surface roughness of the machined surfaces. Our R&D center has facilities that can quantitatively measure cutting processes, enabling tool evaluation and machinability assessment. We received feedback from the company indicating that they were able to identify the causes of the tool defects. 【Case Overview】 ■Request Details - To conduct a quantitative evaluation of the tools - To investigate the causes of tool defects - To measure the surface roughness of the machined surfaces ■Result: The causes of the tool defects were identified *For more details, please refer to the PDF document or feel free to contact us.

Company：内山刃物
Price：Other

Contract Inspection
Contract measurement
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Equipped with an environment for quantitative evaluation of cutting [Tool Evaluation]

It has a significant impact on the finished surface! It is possible to quantify the surface roughness of the finished surface.

We would like to introduce our "Tool Evaluation" services. In the "Cutting Edge Radius Measurement," we quantitatively assess the sharpness of the cutting edge by measuring the radius of curvature using a laser microscope. In the "Rake Face and Relief Face Roughness Measurement," we can quantify the surface roughness of the finished surface by using a laser microscope for measurement. We also offer "Cutting Edge Observation." 【Tool Evaluation】 ■ Cutting Edge Radius Measurement ■ Rake Face and Relief Face Roughness Measurement ■ Cutting Edge Observation *For more details, please refer to the PDF document or feel free to contact us.

Company：内山刃物
Price：Other

Contract Inspection
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

HKF Aluminum Processing High Lead End Mill Long Blade (2 Flutes)

100% German materials, applicable from 15HRC to 45HRC.

1. The base material uses ultra-fine particle carbide made in Germany. 2. Base material hardness: 92.3 HRA (HV30 = 1680 N/mm²). 3. Flexural strength: over 3800 N/mm² (TRS > 3800 N/mm²). 4. Processed using a CNC 5-axis controlled grinding machine made by Walter in Germany. 5. Recommended for high hardness and high-speed cutting processing.

Company：HKF 虹鋼富企業有限公司（HKF カッティングツール）台湾本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SF end mill (PCD strong twist end mill)

Achieving a long blade with a long and strong twist shape using PCD cutting edges.

Our original design has achieved a long blade length and strong twist shape with PCD cutting edges. This strong twisting leads to improved cutting performance, enhancing surface roughness and machining shape accuracy, while also reducing production downtime due to the extended lifespan of the cutting tools.

Company：兼房本社・工場
Price：10,000 yen-100,000 yen

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Attention!! An end mill that produces no burrs! The 'Zero Burr Mill for Resin' has been born.

Outstanding transparency with one-pass machining using an end mill! Machining can be done beautifully without any burrs! We will introduce examples of zero-burr end mills!

We would like to introduce a case study of zero-burr end mill processing that our company has conducted. Tool used: Zero-burr mill for resin (custom-made) Material: Acrylic It can be seen that the side areas are also beautifully drilled, with no burrs, achieving a clean perforation. The zero-burr mill allows for single-pass processing, reducing the number of processes and leading to cost savings. 【Processing Case】 ■ Tool used: Zero-burr mill for resin (custom-made) ■ Material: Acrylic ■ Zero-burr end mill ■ Single-pass processing ■ Excellent transparency ■ No burrs *For more details, please refer to the PDF document or feel free to contact us.

Company：ギケン
Price：Other

Other cutting tools
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End mill "DFC carbide composite material compression end mill"

With CVD coating, it prevents interlayer delamination through compression cutting.

The "DFC Super Hard Composite Material Compression End Mill" features a structure with UP CUT and DOWN CUT spiral grooves that compress the top and bottom surfaces of plate-shaped composite materials towards the center of the plate thickness for machining composite materials. This action prevents DELAMINATION (interlayer separation) of the composite material. 【Features】 ○ The spiral grooves create a shearing action to cleanly cut the fibers within the composite material. ○ The strong positive rake angle minimizes heat generation, preventing the curing agent resin from burning onto the cutting edge, allowing for a quick, sharp, and clean cut. ○ The ultra-hard body coated with a diamond film through CVD can withstand the extremely high wear characteristics unique to composite materials. For more details, please contact us or download the catalog.

Company：株式会社キーベル
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End mill "Ultra-hard ultra-fine diameter compression end mill"

A minimum diameter of 0.8mm prevents interlayer delamination with compression cutting.

A twist groove with both up-cut and down-cut on a single tool prevents the occurrence of burrs and delamination, and compresses the cutting force towards the center of the thickness of the plate-like material. 【Features】 ○ Forms a reinforced finished edge on the top and bottom surfaces of the workpiece due to compression ○ To extend tool life against highly abrasive composites that can wear even carbide tools, two types of coatings are available: DLC coating and CVD coating. For more details, please contact us or download the catalog.

Company：株式会社キーベル
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Tool Improvement Example] Selecting the Appropriate Cutting Tool Based on the Machining Shape

"Selecting the appropriate cutting tool from various processed shapes to meet your needs" Case Study Introduction

"We select the appropriate cutting tools from various processed shapes to meet our customers' requests." Here is a case study. 《Customer's Challenge》 There was a relief groove at the bottom of the counterbore, making it impossible to process with commercially available end mills. Therefore, we collaborated with a tool manufacturer to create a custom tool. 《Solution》 The selection of cutting tools involves choosing the optimal tool shape, base material, and coating based on the workpiece, the machine tool used, the processing content, and the processing method. We also modify the processing content in-house to meet customer requests, which helps reduce tool costs. For more details, please refer to our catalog or feel free to contact us.

Company：フジメカニック
Price：Other

Processing Contract
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Epoch SUS Series EPSF/EPSM/EPSW-PN

Rich lineup! There are options for finishing processes, rough processing to finishing processes, and rough processing.

We handle the MOLDINO company's "Epoch SUS Series," which accommodates various machining processes from rough cutting to finishing. We offer three types: "Epoch SUS Finish (EPSF)" for finishing, "Epoch SUS Multi (EPSM)" for rough to finishing, and "Epoch SUS Wave (EPSW)" for rough cutting. In addition to the vibration suppression effect from the unevenly divided shape, wear resistance is improved by the PN coating. 【Features】 ■ Vibration suppression effect from unevenly divided shape (EPSF/EPSM/EPSW) ■ Smooth chip removal due to two-stage gash (bottom blade pocket) (EPSM/EPSW) ■ Improved chipping resistance and wear resistance due to double eccentric (EPSM) ■ Smooth chip removal due to suitable outer edge full shape (EPSW) ■ Improved wear resistance due to PN coating (EPSF/EPSM/EPSW) *For more details, please refer to the PDF document or feel free to contact us.

Company：鈴商機械工具事業部
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super Hard End Mill Series "C-CSMY"

UT coat double-edged! We will introduce the cutting tools handled by our company.

The "C-CSMY" is a square end mill for flat surface finishing. Our company also offers a variety of cutting tools, including burr-clear M drills and seamless tapholes. Please contact us for inquiries. 【Features】 ■ UT Coating, 2 Flutes ■ For Flat Surface Finishing *For more details, please download the PDF or feel free to contact us.

Company：鈴商機械工具事業部
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NACHi: Aqua REVO Mill Stainless Steel 4-Blade 2.5D Type G

Aqua REVO mill expands the dimensional lineup with a 4-blade 2.5D for stainless steel.

Achieving high efficiency and long lifespan with overwhelming chip separation and cooling effect.

Company：東京山勝
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Original cutting tools all in this one book! "THECUT Comprehensive Catalog"

A wide variety of cutting tools, including end mills and drills, as well as original brand cutting tools such as dedicated cutters for raw claws and hydraulic port O-ring seat surfaces, are featured.

The Cut Mill of the ultra-hard end mill series includes tools for general steel materials, high hardness, aluminum, and difficult-to-machine materials. The drill series features common straight drills, taper shank drills, cap bolt drills, countersink drills specifically for flat head screws, and nos-type drills suitable for large diameter hole drilling with a drill press or electric drill. The exchangeable tip types include cutters for chamfering and engraving, as well as dedicated cutters for O-ring seat surfaces in hydraulic equipment ports. Additionally, we offer a wide range of other tools and fixtures, including holders convenient for managing live centers and hex wrenches. 【Contents】 ■ End Mill Series ■ Drill Series ■ Application-Specific Drill Series ■ Exchangeable Tip Tools ■ Tools and Gauges for Processing Hydraulic Equipment Port Areas ■ Live Centers ■ Work Tools and Others *For more details, please refer to the PDF materials or feel free to contact us.

Company：丸一切削工具
Price：Other

Other cutting tools
Other work tools
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Professional-grade tools for cutting processing! Consolidated into four types of brochures for each series.

Introducing professional-grade tools, including upper and lower surface chamfering, turning processes that involve automatic lathes, and end mills that excel in quality, performance, and price.

This month, we will be exhibiting our latest series of chamfering, turning, end mills, and drills at JIMTOF2024, held at the Tokyo International Exhibition Center, and we will provide brochures for these products. The chamfering series includes special tools such as dedicated hydraulic O-ring seal port tools, while the turning series features turning tool holders with height adjustment functions and tools capable of both milling and chamfering. In the end mill series, we will showcase our latest three-flute end mills that can efficiently process a variety of work materials. We hope these will be helpful when selecting cutting tools. We aim to contribute to your company's productivity improvement. 【Contents Included】 ■ Chamfering Series Brochure ■ Turning Series Brochure ■ End Mill Series Brochure ■ Drill Series Brochure ■ Three-Flute End Mill for Steel IC3WFS Flyer ■ Three-Flute End Mill for Aluminum IC3ZAL Flyer *For more details, please refer to the materials or feel free to contact us.

Company：丸一切削工具
Price：Other

drill
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End mill "MAX BOY End Mill"

Convenient for CNC! Extremely strong carbide solid for high hardness difficult-to-cut materials.

The "MAX BOY End Mill" uses a special ultra-fine particle carbide known as MICRO-100, allowing it to even cut the blade of HRC68° SKH57 end mills. Additionally, it demonstrates excellent cutting performance on difficult-to-cut materials such as strongly adhesive magnetic materials, titanium alloys, and stainless steel. Due to the use of the MA coat (titanium-based composite coating), which meets the demands for higher-speed cutting, increased feed rates, and longer tool life, it is also suitable for materials that experience severe adhesion to the cutting edge. 【Features】 ■ Convenient for CNC ■ No need to change tools based on work material ■ Strong against high-hardness difficult-to-cut materials ■ Uses special ultra-fine particle carbide "MICRO-100" ■ Coated with MA coat *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイナモ
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Comprehensive Catalog of Cutting Tools

A wide range of products, including end mills and carbide-tipped drills, is available.

This catalog is a comprehensive catalog featuring products handled by Fukuda Seiko Co., Ltd., which manufactures and sells special steel cutting tools. We offer a variety of cutting tools, including the "2SF 3S End Mill with 2 Flutes (Standard Flute)" available in a wide range of sizes with a long cutting length, and the "TRD Trimming Die," which can be custom-made in square, round, oval shapes, and more. [Contents] ■ End Mills ■ Shank Cutters ■ Sink Cutters ■ Horizontal Milling Cutters ■ Reamers, etc. *For more details, please download the PDF or feel free to contact us.

Company：フクダ精工
Price：Other

Reamer
End Mills
cutter
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Know-how and Knowledge Introduction] Deriving Optimal Machining Conditions for End Mill Cutting 2

I will introduce the cutting speed and depth of cut in the setting of processing conditions.

MIST Corporation, which develops and sells "cutting catchers," introduces know-how on end mill cutting processing. There is a parameter called "tool rotation speed" that determines the "cutting speed." Additionally, there are three parameters that determine the "cutting amount" for "one-flute cutting," which are "tool rotation speed," "feed rate," and "radial cutting." Finally, there are two parameters that determine the tool's "cutting" against the material: "axial cutting" and "radial cutting." Eliminating overlaps, the parameters that determine the cutting conditions are four: "tool rotation speed," "feed rate," "axial cutting," and "radial cutting." In other words, setting the processing conditions involves determining the values of these four parameters: "tool rotation speed," "feed rate," "axial cutting," and "radial cutting." *For more details, please refer to the catalog or feel free to contact us.

Company：MIST
Price：Other

End Mills
Other CAD related software
Other CAM related software
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End mill "3D end mill"

A 3D end mill that can move freely in vertical, horizontal, and diagonal directions!

The "3D End Mill" is an end mill that achieves sharp 3D machining with a new blade shape and new coating. The new coating significantly improves heat resistance and wear resistance. It is compatible with both dry and wet conditions. Additionally, we offer custom-made options, so please feel free to contact us with your requests. 【Features】 ■ Free control of vertical, horizontal, and inclined surfaces ■ Significantly improved heat resistance and wear resistance ■ Compatible with dry & wet conditions *For more details, please download the PDF or feel free to contact us.

Company：ウノコーポレーション本社
Price：Other

others
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Engineering Concentration] Special tools and special molds: drills, reamers, end mills

High-precision special tools and special molds that meet advanced precision machining technology! Stabilizing dimensional accuracy! Machining tailored to your needs, whether for small lots or mass production!

Kato Seiko Co., Ltd. produces high-precision special cutting tools and special form tools to meet the increasingly sophisticated and diverse needs of our customers. We can process both small lots and mass production according to your requirements. We also offer the possibility of submitting prototypes, allowing us to provide products that better match your intended use and operating environment. 【Products Offered】 ■ Multi-step drills ■ Reamers ■ End mills ■ Flat drills ■ Half-moon drills ■ Form tools ■ Recess tools ■ Side cutters ■ Form cutters, etc. * For details, please refer to the PDF data available for download. * If you would like technical consultation or a quote, please check "Request for Quote" in the inquiry form and apply.

Company：加藤精工本社
Price：Other

drill
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Ideal for Improving Dimensional Accuracy - General Type End Mill

Whether it's small lots or mass production, we can process according to your needs! Examples of end mill manufacturing *Also for the aerospace industry!

This document presents case studies of end mill production by Kato Seiko, a company that produces high-precision special tools in response to advanced precision machining technology. We conduct hearings from various angles, including current cutting conditions, machines, tooling, clamps, and workpieces, to analyze issues and propose optimal shapes and cutting conditions. We can also provide prototypes, allowing us to offer products that better match your intended use and environment. Whether for small lots or mass production, we will process according to your needs. We will provide estimates based on your desired materials and specifications, so please feel free to contact us first. *For details, please refer to the PDF data available for download. *If you wish to consult on technical matters or request an estimate, please check "Request for Estimate" in the inquiry form and apply.

Company：加藤精工本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Production Example] Improved Dimensional Accuracy / Reduced Setup Time for Labor Savings - Special End Mill

Sizes can be customized to your needs! Here are examples of products made for aircraft parts and CFRP/FRP processing.

We would like to introduce our case study of the production of "special end mills" for aircraft parts and CFRP/FRP processing. Depending on the processing conditions, there are some processes that cannot be performed using wet processing, and we take into account cutting performance and heat management. Various aircraft parts and components made of CFRP, FRP, etc., are the target for processing. 【Features】 ■ Consideration for cutting performance and heat management ■ Production capacity: made to order ■ Processing materials: CFRP, FRP, titanium, Inconel, etc. ■ Machinery used: Primarily CNC tool grinding machines, produced by our machines and craftsmen ■ Work size: 3 to 20φ (sizes can be adjusted according to requests) * For details, please refer to the PDF data available for download. * If you would like technical consultations or estimates, please check "Request for Estimate" in the inquiry form and apply.

Company：加藤精工本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel (SUS) Custom-Made End Mill Polishing Kansai

If you need stainless steel processing in Kansai, leave it to us! 【Stainless Steel (SUS) Custom-made End Mills Polishing Kansai】

【Stainless Steel (SUS) Custom-Made End Mill Polishing Kansai】【Lot】 1 to 1000 【Features】 This is a processed product made of stainless steel. Our company has a design team, and we can manufacture custom-made products. We will process according to your desired functions and shapes. Production is possible at three locations: Osaka, Tottori, and China. Each factory is equipped with NC lathes and machining centers. If you are having trouble with stainless steel processing, please feel free to contact Matsui Manufacturing!

Company：松井製作所
Price：Other

valve
Analytical Equipment and Devices
Vacuum Equipment
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MOLDINO Co., Ltd. Product Digest 2

We have exchangeable end mills for finishing processes and chamfering tools for high-hardness steel processing available!

We would like to introduce the MOLDINO products handled by Daito. Our lineup includes the smart roughing alpha ball end mill "BR2P," the alpha polish mill V type "ASPVmini," and the interchangeable end mill for finishing "ABPF/ARPF," among others. Please feel free to contact us when you need assistance. 【Lineup & Features】 ■ Alpha Ball End Mill "BR2P" The twisted cutting edge achieves high efficiency in mold rough machining. Smooth processing of build-up welding materials is also possible. ■ Alpha Polish Mill V Type "ASPVmini" A shortcut to finishing the vertical walls and bottom surfaces of molds in one go. Reduces time spent on reprocessing and corrections. ■ Interchangeable End Mill for Finishing "ABPF/ARPF" A standard for finishing and semi-finishing processes for various molds. The twisted blade design reduces cutting resistance. ■ Chamfering Tool for High Hardness Steel "DN2HC-ATH" Ideal for chamfering and centering processing of high hardness materials (up to 65 HRC). *For more details, please refer to the PDF document or feel free to contact us.

Company：大東
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

SUS End Mill "4BEAT PLUS"

Achieving high efficiency and long lifespan! Introducing end mills for SUS along with processing examples.

"4BEAT PLUS" is an end mill for SUS with PT coating. It is designed for machining materials such as precipitation-hardened stainless steel, achieving high efficiency and long tool life. It also demonstrates excellent performance on cast materials (FC, AC, etc.). 【Machining Example】 ■Tool Used: 4BTP-5 ■Work Material: ADC12 ■Machining Content: Side Cutting ■Cutting Conditions ・Spindle Speed: 2500 min-1 ・Cutting Speed: V=78.5 m/min ・Feed Rate: 300 mm/min ・Depth of Cut: ae=0.15 mm ap=10–20 mm *For more details, please refer to the PDF document or feel free to contact us.

Company：工研本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High hardness end mill "HARD BEAT"

Introducing high-hardness end mills suitable for hardened steel over 60HRC, along with processing examples.

"HARD BEAT" is a high-hardness end mill with AD coating. It enhances tool rigidity and is suitable for hardened steel with a hardness of 60HRC or higher. Additionally, it has proven performance not only with high-hardness steel but also with FCD. 【Processing Example】 <Rough Machining> ■ Tool Used: HBT-2 No Radius ■ Work Material: S43CN ■ Machining Details: Side Cutting (Rough Machining) ■ Cutting Conditions - Spindle Speed: 3000 min-1 - Cutting Speed: V=94 m/min - Feed Rate: 450 mm/min - Depth of Cut: ae=15～2.0 mm ap=9 mm *For more details, please refer to the PDF document or feel free to contact us.

Company：工研本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum End Mill "ZERO BEAT"

Achieve excellent cutting performance and machining surfaces! Introducing aluminum end mills along with processing examples.

"ZERO BEAT" is a non-coated end mill for aluminum. It adopts our unique blade shape for aluminum, achieving excellent cutting performance and surface finish. It is also compatible with inclined cutting such as helical machining and wrapping processing. Additionally, the DLC (hydrogen-free type) coating can be added for further performance enhancement. 【Processing Example】 ■ Tool Used: ZBT-T Custom (Blade Diameter φ18×R0.2, Blade Length L35, Shank Diameter φ16, Total Length L105) ■ Material Being Processed: A5052 ■ Processing Details: Rough machining ■ Cutting Conditions - Spindle Speed: 20000 min-1 - Cutting Speed: V=1130 m/min - Feed Rate: 10000 mm/min - Depth of Cut: ae=9～12 mm, ap=2 mm *For more details, please refer to the PDF document or feel free to contact us.

Company：工研本社
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End mill "TZ Mill"

Two-flute and four-flute options available! End mills featuring the new GS coating.

We would like to introduce our end mill, the "TZ Mill." It features a new coating, "New GS Coat," which provides innovative performance due to its two effects (resistance to thermal fatigue and minimal heat transfer to the cutting edge). We offer both "2-flute" and "4-flute" options. The materials that can be machined include iron, stainless steel, aluminum, heat-resistant steel, and high-hardness steel (up to HRC55). 【Features】 ■ Equipped with New GS Coat ■ Available in 2-flute and 4-flute options ■ Machinable materials: iron, stainless steel, aluminum, heat-resistant steel, high-hardness steel (up to HRC55) *For more details, please refer to the PDF document or feel free to contact us.

Company：タナカ善
Price：Other

End Mills
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CDM 90° Carbide 2-Flute Center Chamfer End Mill

An end mill capable of centering, chamfering holes, C chamfering, V-grooving, and side processing!

The "CDM 90° Carbide 2-Flute Center Chamfer End Mill" is an end mill with a tip angle of 90°. It is capable of centering, hole chamfering, C chamfering, V-groove processing, and side processing. By adopting a TiAlN coating, it achieves a hardness of 2800 Hv and a heat resistance temperature of 800°C. Additionally, the recommended materials for this product are SS, SC, SCM, SKD, and SUS. 【Features】 ■ 90° tip angle carbide 2-flute chamfer end mill ■ Capable of centering, hole chamfering, C chamfering, V-groove processing, and side processing ■ TiAlN coating (hardness 2800 Hv, heat resistance temperature 800°C) *For more details, please refer to the PDF document or feel free to contact us.

Company：ダイエイコーポレーション
Price：Other

End Mills
Other cutting tools
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

PE Ultra Hard 4-Flute Solid High Helix End Mill

Introducing end mills with a twist angle of 45° and a cutting edge tolerance of h8, ideal for steel and stainless steel!

The "PE Ultra Hard 4-Flute Solid High Helix End Mill" is an end mill suitable for steel and stainless steel. The recommended materials for this product are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD. With the adoption of a TiSiN coating, it achieves a hardness of 3600Hv and a heat resistance temperature of 1100°C. *(Note: The 16mm and 20mm diameters have a TiAlN coating, hardness of 2800Hv, and heat resistance temperature of 800°C.)* The diameters available range from 3 to 20mm. 【Features】 ■ Medium size cutting length ■ Twist angle 45°, cutting edge tolerance h8 ■ TiSiN coating adopted ■ Recommended materials are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD *For more details, please refer to the PDF document or feel free to contact us.*

Company：ダイエイコーポレーション
Price：Other

End Mills
Other cutting tools
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sato Machinery Co., Ltd. Business Introduction

Leave it to us for machinery, equipment, and tools.

Sato Kiko Co., Ltd. operates as a distributor of machine tools, engaging in the sale of machinery and tools. Each of the machine tools and equipment we handle is marked with a solid proof of reliable technology and trust. We also facilitate the buying and selling of used machinery and provide exhibition services at our warehouse. Please feel free to contact us regarding prices and conditions. 【Business Activities】 ■ Sales of machine tools, equipment, and tools ■ Sales of environmental equipment ■ Sales of office equipment *For more details, please download the PDF or contact us.

Company：佐藤機工
Price：Other

Other cutting tools
Other work tools
End Mills

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

End Mills Product List and Ranking from 72 Manufacturers, Suppliers and Companies | IPROS GMS

End Mills Manufacturer, Suppliers and Company Rankings

End Mills Product ranking