シーピーアイ Product Lineup

The air-operated telescopic mast is an aluminum mast that can be extended and retracted by injecting and releasing air. The mast is made of lightweight aluminum alloy tubes that have been anodized, making them resistant to corrosion and highly durable. The number of sections can vary from 2 to 14, depending on the height when extended or retracted and other specifications. Models with a locking mechanism on each section can be locked at each section or in between sections, allowing the mast to be fixed at the desired height, which will be maintained even after releasing the air. Smaller models can be extended using a manual pump, so no power supply is required. By opening the air release valve and letting the air out, the mast will slowly descend (retract) under its own weight. Therefore, no power supply is needed for retraction in emergencies, and it can be retracted even during a power outage. Since there are no mechanisms or mechanical parts such as motors, wires, or pulleys, there are no troubles caused by failures of these components, and special maintenance is not required. It is safe because even if the air hose disconnects, it will slowly descend under its own weight.

• others
• Pneumatic Equipment
• Other network tools

Eureka DDR4 2933 is a DDR4 DIMM/SODIMM function tester for memory distributors and module manufacturers, capable of testing DDR4 RDIMM (x4, x8), UDIMM (ECC/Non-ECC), SODIMM (ECC/Non-ECC), VLP-RDIMM, LRDIMM, and BGA chips.

• others
• Other inspection equipment and devices
• Semiconductor inspection/test equipment

The SN-12 is a 1-to-11 PCIe/NVMe M.2 duplicator that can copy the content of a master M.2 device to 11 NVMe M.2 SSDs at high speed simultaneously. It supports various copy modes, including full copy and brief copy, to meet diverse copying needs, and it also allows for data erasure and formatting. Copy logs can be displayed on the screen and saved to a USB drive.

• Other information systems

Ez-SPD is an SPD EEPROM programmer specifically for DDR, DDR2, DDR3, DDR4, DDR5, UDIMM, RDIMM, and SODIMM.

• Memory
• Semiconductor inspection/test equipment
• Tester

The MX4 is the latest NVMe interface M.2 device duplicator, featuring high-speed copying approaching 10GB per minute, compact and lightweight design for excellent portability, ease of use with a full-color touchscreen, and equipped with USB 3.0 / 2.0 ports, catering to various M.2 device duplication needs.

• Storage
• Other information systems
• Other PCs and OA equipment

The Eureka DDR3 1866 DIMM/SODIMM tester is a function tester for memory modules designed for module manufacturers and module distributors, capable of testing various DDR3 RDIMM, UDIMM, SODIMM, Mini-DIMM, VLP-RDIMM, LRDIMM, and more.

• Memory
• Other inspection equipment and devices
• Memory

The M1500-USB/M5116-PR/M5132-PR is a USB duplicator that can copy the contents of a master USB drive to multiple target USB drives at once. The M1500-USB can copy/verify the contents to 7 USB drives at a time, the M5116-PR to 15 USB drives, and the M5132-PR to 31 USB drives, while also allowing for erasing (data deletion) and formatting of the target drives. These three models can operate as standalone devices or can be connected to a KVM (keyboard, video monitor, mouse) for GUI operation. They also support USB 3.1/2.0, and can copy at a speed of 3GB/min with USB 3.0 drives (actual speeds depend on the speed of the drives being used).

• Other information systems

This is a CES (Conductive Elastomeric Socket) type IC/DRAM socket that does not damage IC balls, unlike conventional Pogo-Pins.

• Memory
• Other electronic parts
• Evaluation Board

The UHA series is a HDD/SSD duplicator with SATA-1/2/3 interfaces that can copy (duplicate) the content of a master drive to multiple target drives at once. The effective copy speed reaches 219MB/sec for HDDs and 280MB/sec for SSDs, allowing for the fastest copy times of approximately 38 minutes for a 500GB HDD and about 15 minutes for a 256GB SSD (copy speeds may vary depending on the drives used). This device operates as a standalone unit, but when connected to a PC via a serial (RS-232) interface, it allows for monitoring of operational status as well as the display and storage of copy logs, which are useful for production management. The increase in HDD/SSD capacity raises the time required for content copying, becoming a bottleneck in production lines. The UHA series HDD/SSD duplicator helps improve productivity with various features, including accelerated copy speeds and a BRIEF copy mode that allows for copying only the data excluding free space.

• Other information systems
• Storage Backup
• Storage

The front panel's touchscreen allows for intuitive and easy operation. In addition to copying the entire device, you can shorten copy time with the smart mode that automatically copies only specified portions based on capacity, percentage, and number of sectors, as well as the actual usable area. With sector copy mode and high-reliability verification through bit-level data comparison and CRC32/MD5 checks, you can create a target device that is 100% identical to the master. The device supports form factors of 3.5", 2.5", 1.8", MO-297, and MO-300, and can also accommodate CFast using custom adapters. It features a speed test function for performance evaluation, copy logs, and quick device type changes through a removable module system. Additionally, by connecting a built-in PC and KVM (keyboard, video monitor, mouse), you can edit/create new copy jobs, and remote control is possible via network connection, making it a duplicator that flexibly adapts to the user's production system.

• Storage
• Industrial PCs
• Embedded Board Computers

The DW-121 is a 1-to-1 duplicator designed for small-scale duplication and backup of hard disks with IDE and SATA interfaces. This device is compact and lightweight, making it easy to carry and suitable for maintenance in the field.

• Storage Backup

The content of the master SD card or master image file can be copied to 7 (M1500-SD), 15 (M5500-16), or 31 (M5500-32) SD/microSD cards at the shortest time possible. In addition to standalone operation using button controls on the front panel and an LCD display, connecting a KVM (keyboard, video monitor, mouse) allows for operation that maximizes the use of rich features while viewing a large external display. In addition to executing numerous jobs such as copy/verify/erase/format/test provided as standard, it is also possible to edit and create new jobs by replacing/inserting/deleting commands, as well as displaying logs and outputting them in CSV format. The duplication software, which operates on Linux with a built-in PC and HDD, can be controlled from other PCs on the network, and an automated production system using robots is also available.

• Other processing machines
• Other PCs and OA equipment
• others

The SP3000 is a high-performance memory tester capable of testing DDR and other DIMM and BGA memory chips. By exchanging test adapters, it can test various types of memory at real bus speeds and real cycle times. The SP3000 offers a wide range of adapter options, allowing for testing of various memory types such as DRAM, SDRAM, SGRAM, and DDR SDRAM. It features a flexible architecture that can be used without becoming obsolete in the future, supporting volume testing with the RoboFlex handler. Its excellent design and high reliability have made it widely used by numerous memory module manufacturers, distributors, dealers, and service departments.

• Other electronic parts
• Testing Equipment and Devices
• Image Processing Equipment

The VITEC VM4-C9 board is designed for demanding video applications, providing extremely high-quality HD and SD H.264 encoding at up to 1080p 30 (SDI & HDMI). The compact and low-power VM4-C9 is ideal for industrial applications. The VM4-C9 card and SDK, using a new framework called Dorsalista, allow for application development on Windows or Linux OS.

• Image Input Board
• Surveillance Camera System
• Encoder/Decoder