プライミクス List of Products and Services

Here are the appealing points of using the Lab Solution® emulsion dispersion testing machine, which is the de facto standard for consolidated evolution! ▼ ▼ ▼ ○ There are plenty of stirring options that can be easily swapped, making it easy to try various configurations during the initial investigation phase. ○ You can select the appropriate model based on the stirring purpose and the processing liquid. ○ The increased motor power allows you to confirm the load condition, providing peace of mind when increasing the rotation speed. Materials that were previously overloaded can be retested. ○ The temperature sensor is standard equipment, and the temperature is displayed on the operation panel. This improves work efficiency compared to testing with a separate thermometer.

Here are the appealing points of using the de facto standard emulsification and dispersion testing machine, Lab Solution(R), which consolidates evolution! ▼ ▼ ▼ ○ There are plenty of stirring options that can be easily swapped, making it easy to try various configurations during the initial testing phase. ○ You can select the appropriate model based on the stirring purpose and the processing liquid. ○ The increased motor power allows you to confirm the load condition, providing peace of mind when increasing the rotation speed. Materials that were previously overloaded can be retested. ○ The temperature sensor is standard equipment, and the temperature is displayed on the operation panel, making it more convenient than testing with a separate thermometer.

By rotating in both forward and reverse directions, it efficiently incorporates powder and granular materials, enabling uniform emulsification and dispersion. The stirring unit is interchangeable. In addition to the Homomixer MARK II, options for a Homodisper (20 type and 40 type) and a Pipeline Homomixer (only 20 type) can be installed, making it a model capable of various processes such as emulsification, dispersion, micronization, and inline processing.

This is a type equipped with the option stirring unit of the 20-type auto mixer, the pipeline homomixer SL model. The pipeline homomixer is a stirring machine that can perform mixing, micronization, emulsification, and dispersion processing inline. *Please also take a look at the pipeline homomixer page. https://www.ipros.jp/product/detail/2000207160

Just connect the power supply and water piping, and you're good to go! This is a compact vacuum emulsification device that incorporates peripheral equipment (constant temperature water bath, vacuum pump) into the main unit, taking up minimal installation space. *Model change in September 2016! It has become easier to use. +-------------------------------+ 　＜Differences from the previous model＞ 　● The touch panel has been completely renewed, improving operability. 　● Data logging via SD card is now possible. +-------------------------------+

This is a tabletop research machine, the vacuum emulsification disperser Adhomomixer(R). Disassembly and cleaning are very easy. When removing the container, simply detach the clamp, and the resin on the side can be removed with a single touch. The bottom scraper is also designed to be detachable with a single touch. ■Main Functions■ High shear emulsification, high-speed micronization dispersion of slurries, general stirring and dissolution, degassing, heat exchange.

**Features** - Capable of dispersing and mixing high-viscosity materials. - Efficiently flows the processing liquid and foam through "three-dimensional wings" and "S-shaped effects." - Excellent suction from the axial direction and discharge in the radial direction, ensuring uniform mixing throughout. - Effective for dispersing and mixing materials that tend to float near the liquid surface or settle at the bottom of containers. - A turbine with a three-dimensional structure that allows foam and processing liquid to flow naturally. ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try. Feel free to contact us if you wish to request a test.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 56-L model is capable of both batch and continuous operation on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by assembling a line. This single unit can be compactly used for everything from research and development to small-scale production!

CLEARSTAR(R) is a vacuum emulsification device/system capable of CIP (Clean-in-Place) and SIP (Sterilize-in-Place). With the strong shear force and pumping capability of the Neo Kaiser(R) stirring unit located below the tank, the entire material can be uniformly stirred through external circulation (from the bottom of the tank to the external circulation piping and back to the top of the tank). ◎ The model 5 is a research prototype of CLEARSTAR(R). ◎ Scale-up is possible!

CDM stands for Continuous Dispersion Mixing, which is a continuous manufacturing process for electrode slurries using Filmix® developed for the dispersion applications of electrode materials in lithium-ion batteries and fuel cells. The nanoparticle design mixer (dispersion stirring device) Filmix® 56-L type is compatible with both batch and continuous processes. It can also be used by setting up a continuous line on a tabletop. ▼▼ Basic Procedure for Continuous Operation ▼▼ 1) Preliminary dispersion with a homodisperse or similar device 2) Transfer of the processing liquid using a pump 3) Dispersion with Filmix® ■ This single unit can be compactly used from research and development to small-scale production! ■ There are many successful scale-up cases from research machines to production machines! ◆◇━━━━━━━━━━ 　　Testing Now Available! ━━━━━━━━━━━◇◆ If you have materials that are problematic for dispersion or homogenization, please give it a try. We are currently offering two booklets related to battery manufacturing as a gift. 　◎ 'Battery Device Countermeasures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' * If you would like to request a test or booklets, please feel free to contact us.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. In the dispersion process of ceramics, including alumina (aluminum oxide Al2O3), it significantly shortens development time through emulsification and dispersion in seconds. *Patent obtained. The 56-L model can operate in both batch and continuous modes on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by assembling a line. This single unit can be compactly used from research and development to small-scale production. ◎ Control of average particle size is possible through circumferential speed! ◎ Processing is completed in a short time, improving research speed! ◎ Highly reproducible experiments are possible! ◆◇━━━━━━━━━━━ 　　　Testing now available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try! *If you wish to test, please feel free to contact us.

Filmix® is a mixer (dispersion stirring device) for nanoparticle dispersion that achieves sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 40-L model is a small desktop machine for testing. There are cases where processing that used to take more than half a day for one batch can now be completed in just 30 or 60 seconds, receiving high praise for its extremely fast processing time!

The CombiMix® is a composite type mixer (multi-axis mixer) capable of stirring according to various applications. It is a mixing system that incorporates both low-speed and high-speed stirring components within a single container, making it widely applicable for emulsification, dispersion, dissolution of high-viscosity materials, heat exchange, and kneading. It has a proven track record in dispersing automotive catalyst slurries, sealing materials (talc + oil), and food ingredients, among others. There are also many successful cases of scaling up to large production machines.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 30-L model is the smallest unit in the Filmix® series. It is well-received as a research tool for scaling up from next-generation material research to mass production. This unit also serves as an optional stirring component for Lab Revolution®, and it can be used by attaching it to an existing Lab Revolution® you may already own.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult with conventional high-speed stirrers. It significantly shortens development time for battery device manufacturing, such as lithium-ion batteries and capacitors, through emulsification and dispersion in seconds. The 56-L model can operate in both batch and continuous modes on a tabletop. Once the conditions are set in batch mode, continuous experiments can be conducted by setting up a line. This single unit can be compactly used from research and development to small-scale production! ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are challenging for dispersion or homogenization, please give it a try! We are currently offering two booklets related to battery and fuel cell manufacturing as a gift! 　◎ 'Battery Device Measures Booklet'　　 　◎ 'Booklet on Fuel Cell MEA Manufacturing' *If you would like to request a test or booklets, please feel free to contact us.

Homomixer MARK || (Mark Two) was born in 1949 as Japan's first high-speed stirrer. As times have changed, it has been used in numerous fields, including the chemical industry, pharmaceuticals, cosmetics, and food, earning a long-standing high reputation due to many achievements in product development and quality improvement. It is a best-selling product of high-speed emulsification and dispersion, embodying years of refinement and accumulated technology. *You can see the liquid flow of Homomixer MARK || in the Labolution(R) introduction video at 1:30 and 1:45 below.*

The Homodisper is a device that simultaneously draws powder into a liquid by the high-speed rotation of its stirring blades and performs the micronization and dispersion of aggregates through the cutting action of the blades. The Homodisper Type 2.5 is a test machine for uniform dispersion and a small-scale production machine. *The Homodisper Type 2.5 appears in the video from 0:11 below.*

The Homomixer MARK || (Mark Two) was born in 1949 as Japan's first high-speed mixer. As the times have changed, it has been used in numerous fields, including the chemical industry, pharmaceuticals, cosmetics, and food, earning a long-standing high reputation due to many achievements in product development and quality improvement. It is a best-selling product of high-speed emulsification and dispersion, embodying years of refinement and accumulated technology. *You can see the liquid flow of the Homomixer MARK || in the Labolution(R) introduction video at 1:30 and 1:45 below.*

The Homodisper is a device that simultaneously draws powder into a liquid by the high-speed rotation of its stirring blades while also performing the pulverization and dispersion of aggregates and dissolution through the cutting action of the blades. The Homodisper Type 2.5 is a test machine for uniform dispersion and a small-scale production machine. *In the video below, the Homodisper Type 2.5 appears at 0:11.*

This is a type equipped with the option stirring unit of the 20-type auto mixer, the pipeline homomixer SL model. The pipeline homomixer is a stirring machine that can perform mixing, micronization, emulsification, and dispersion processing inline. *Please also take a look at the pipeline homomixer page. https://www.ipros.jp/product/detail/2000207160

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. Emulsification and dispersion in seconds significantly shorten research and development time. The 56-L model can operate in both batch and continuous modes on a tabletop. Once the conditions are established in batch mode, continuous experiments can be conducted by setting up a line. This single unit can be compactly used for everything from research and development to small-scale production! ◆◇◆ Testing Now Available! ◆◇◆ If you would like to request a test, please feel free to contact us.

The Hibis Dispermix is a dispersing, mixing, and kneading machine (a composite type stirrer, mixer) that can perform kneading and high-speed stirring simultaneously. It is suitable for uniformly dispersing and mixing large amounts of powder with small amounts of liquid. It can handle materials ranging from low viscosity to high viscosity with just this one machine. It has a proven track record in the dispersion of slurries for lithium-ion battery electrodes. Heating and cooling are also possible with a jacketed container.

HibisMix® uniformly mixes substances from low viscosity to ultra-high viscosity in a short time. It is a versatile mixer (kneader, agitator) that can handle mixing, kneading, vacuum, heating, cooling, and more. The 2P-03 and 2P-1 models are test machines for research and development, as well as small-scale production machines. They are very popular tabletop mixers that flexibly accommodate a wide range of mixing and kneading needs, with numerous successful scale-up cases to production machines. *The twisting blade of HibisMix® appears in the video below.

The Hibis Dispermix is a dispersing, mixing, and kneading machine that can perform kneading and high-speed stirring simultaneously. It is suitable for uniformly dispersing and mixing large amounts of powder with small amounts of liquid. This single unit can handle materials ranging from low viscosity to high viscosity. It has a proven track record in various applications, including chemical products such as metal pastes and slurries for lithium-ion battery electrodes, as well as pharmaceuticals, dental materials, and food products. The Type 3D-2 is a benchtop research machine designed for processing 2 liters. When making lithium-ion batteries...! Many users start their research and development with this Hibis Dispermix.

Filmix® is a mixer (dispersion stirring device) that enables sharp particle size distribution and micronization to nanometer sizes, which was difficult to achieve with conventional high-speed stirrers. It has a proven track record in the battery industry. ● Uniform Mixing The performance of lithium-ion battery electrode materials cannot be realized without uniform mixing. By using Filmix® to mix materials uniformly, a highly stable slurry can be produced. ● Accelerated Development Speed By achieving emulsification, dispersion, and nanometer-level micronization in seconds with Filmix®, development time can be significantly reduced. ● Testing Now Available! If you have materials that are challenging to disperse or homogenize, please give it a try! Additionally, we are currently offering two catalogs related to electrode material slurry production as a gift! ◎ "Continuous Production Technology CDM Process (Filmix® Catalog)" ◎ "Booklet on Fuel Cell MEA Manufacturing" *If you would like to request a test or catalogs, please feel free to contact us.

Lab Revolution® is an emulsification and dispersion testing machine that can accommodate vacuum, continuous, and batch processes. It has now undergone a model change to become more stylish with enhanced quietness! * Achieved quieter operation at 22,000 r/min compared to previous models * More stylish design * 220V option available

The Telecorta R is a stirring blade that generates a strong liquid flow by using a propeller-shaped blade while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wing, which has its tips bent, and reduces bubble entrapment with the auxiliary wing, which has a slightly larger diameter than the main wing. It has now been renewed to be even stronger for high viscosity! *We are currently accepting tests for the Telecorta R. For more details, please contact us using the form below.

The Telecolta R is a stirring blade that generates a strong liquid flow by adopting a propeller shape while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wings that have their tips bent, and the auxiliary wings, which are slightly larger in diameter than the main wings, help reduce the entrapment of bubbles. It has been renewed to be even more effective for high-viscosity materials! *Testing for the Telecolta R is currently being accepted. For more details, please contact us using the form below.

We would like to introduce the reaction using the Filmix® stirring device from Plaimix Co., Ltd., a professional in emulsifiers, dispersers, kneaders, and stirrers. When conducting a reaction with a propeller mixer, the reaction starts at the point where the liquid hits the blades after the reaction liquid is added, leading to the following issues: - Uniform reactions are difficult... (the reaction starts where the liquid hits the blades) - The processing liquid splashes... - A large amount is required for testing... The thin film rotary Filmix® solves the above problems as follows: ◎ Uniform reactions (the processing liquid forms a thin film and instantly hits the blades after the reaction liquid is added) ◎ No splashing as the processing occurs within the container ◎ Processing is possible from a minimum of 10 mL If you are interested, please feel free to contact us. We are also accepting tests!

Introducing the dissolution of CMC (carboxymethyl cellulose) using the high-speed stirrer Telecorta R from Plimix Co., Ltd., the professional in emulsifiers, dispersers, kneaders, and stirrers. In the dissolution of CMC-based polymers, there are issues such as: - Formation of lumps (clumps of powder)... - Long dissolution times... These problems are solved by Plimix's high-speed stirrer! ◎ Equipment: Telecorta R Concentration: Supports dissolution at 2% Viscosity: Up to 10,000 cP The Telecorta R generates a strong liquid flow by having a propeller-shaped blade while possessing dispersion power equivalent to that of a homodisperse. The main wing, which has its tip bent, exhibits strong dispersion power, while the slightly larger secondary wing reduces the entrapment of bubbles. It has been renewed to be even stronger for high viscosity! *Testing for the Telecorta R is currently being accepted. For more details, please contact us via the form below.

Introducing the mixing process using the Hibis Dispermix, a stirring device from Plimix Co., Ltd., the professional in emulsifiers, dispersers, kneaders, and stirrers. In the mixing and kneading of high-viscosity materials, there are issues such as: - Remaining lumps... - Inability to degas... - Desire to process while heating and cooling... Plimix's high-speed stirrer solves these problems! ◎ Device: Hibis Dispermix - It features a three-axis planetary stirring method that combines low-speed twisting blades with a high-speed shaft, allowing for high-speed stirring while kneading. - The container has a jacket structure, enabling kneading while heating and cooling. - Degassing is possible through vacuum suction. *We are currently accepting tests for the Hibis Dispermix. For more details, please contact us using the form below.

We propose a CDM process using our Filmix® as a method for manufacturing electrode slurries for lithium-ion batteries. Compared to traditional solid kneading methods, it offers the following advantages: - Short processing time - High dispersion capability - High reproducibility - Easy scale-up for mass production ■ Solid Kneading Method Process We use kneading machines such as Hibis Dispermix. The typical process involves adding all the powdered raw materials → gradually adding liquid raw materials → kneading until it forms a crumbly to dough-like consistency → further adding liquid raw materials gradually for dilution → performing viscosity adjustment and degassing. <Problems with the Solid Kneading Method> - Maximum scale is around 1,000L - Takes 5 to 10 hours per batch - Low reproducibility ■ CDM Process Steps In the CDM process, instead of taking 5 to 10 hours, we slurry the mixture by adding all liquid and powdered raw materials at once and pre-mixing for about 30 minutes until it can be pumped → then we continuously process the entire amount using Filmix® in 30 minutes. <Effects of the CDM Process> 1) MAX processing of 1,920L/H 2) High reproducibility due to fewer man-hours 3) Reduction in the number of personnel required 4) Decrease in the number of devices and installation area needed

Are you having trouble with dissolution, dispersion, or mixing? We would like to introduce the "Homodisper," a high-speed stirrer suitable for dissolving CNF (Cellulose Nanofiber), a next-generation material, from Primix Corporation, the professionals in emulsifiers, dispersers, kneaders, and stirrers. As you may know, CNF is a next-generation material that is being adopted in various fields. <Examples of Use> - Automotive components (lightweighting, strength enhancement) - Renewable energy storage batteries (improved storage capacity) - Food additives (increased viscosity and moisture retention) - Cosmetics (thickening and improved texture) and more. ■ Dissolving CNF using a high-speed stirrer The Homodisper is primarily used for dissolving CNF. The Homodisper features a circular stirring section at the tip of a high-speed shaft that rotates rapidly, drawing liquid from above and below the stirring section and smashing clumps against it, allowing for quick dissolution throughout the solution. This high-speed rotation enables the dissolution of viscous CNF powder without clumping. ■ Recommended stirrers from Primix ☆ Lab Solution® ☆ Homodisper 2.5 type The Lab Solution®, which allows for the exchange of various stirring sections, is particularly recommended!

HibisMix® consists of a two-axis planetary mixing, dispersing, and kneading machine with two stirring blades that rotate and revolve. The two stirring blades can uniformly mix the contents of the container by rotating while revolving. As a result, there is minimal dead space, allowing for uniform mixing even with very high-viscosity materials. It is suitable for mixing and dispersing from paste to clay-like consistency and is primarily used in kneading operations that require uniform mixing and dispersion of large amounts of powder with small amounts of liquid. It can handle kneading of high viscosity up to about 1,000 Pa·s (1,000,000 cP).

ClearStar® is a vacuum emulsification device/system capable of CIP (Clean-in-Place) and SIP (Sterilize-in-Place). With the strong shear force and pumping capability of the NeoKaiser® installed at the bottom of the container, external circulation (from the bottom of the tank to the external circulation piping and back to the top of the tank) allows for homogeneous stirring of the entire processing material. ◎ Powders can be vacuum-suctioned and dissolved without lumps. ◎ Model 5 is a research model of ClearStar®. ◎ Scale-up is possible!

Features - Capable of emulsifying and dispersing high-viscosity liquids on a scale of 1.5L to 2L - The stirring unit can be combined according to the emulsification and dispersion processing: 1. Homomixer MARK2, Neo Kaiser(R), Homodisper (exchangeable) 2. Homodisper (fixed) 3. Anchor mixer or ribbon anchor mixer (can choose between pushing up or pushing down) - Operates on a 100V power supply - Capable of heating (hot water, steam) and cooling (cold water, chiller) (equipped with wall scraping scraper to improve heat exchange efficiency) - Capable of vacuum processing - Can record operating logs on the included SD card