サニー・トレーディング List of Products and Services

Method - Ion Selective Electrode Reagent 1 is added before analysis to activate the electrode. After that, the first measurement is taken. Next, a small amount of a high-concentration nitrate solution is added, and a second mV measurement is performed to calculate the results. If an extraction solution is used, cleaning with an ammonia-based cleaning solution is necessary after analysis to prevent cross-contamination. Many probes are affected by interference from nitrite and chloride, but in this method, using the extraction solution at the beginning of the analysis completely removes the influence of these two ions. Therefore, the only ion affecting the measurement is the nitrate ion (NO₃⁻).

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the reagent and setting appropriate conditions for the sample, the titrant is filled. Thanks to the minimum addition amount of the module syringe driver being controlled in 0.015 mL increments, very high precision is achieved. Furthermore, the software has been improved to speed up the initial dosing, and as it approaches the inflection point, the titrant is added slowly, enhancing accuracy.

• Other measurement, recording and measuring instruments

By using the WatchGas rechargeable motor-driven ATEX pump, a diffusion-type gas detector can easily be converted into a sampling-type gas detector, allowing for gas detection even in areas inaccessible to users. Furthermore, by connecting additional probes, accidents can be prevented before entering confined spaces. It is extremely user-friendly, as it can be operated with the push of a button. The LED indicator allows for easy monitoring of operational status, enabling real-time responses to pump issues. Additionally, it can be charged via USB Type-C, requiring up to 7.5 hours for a full charge, and can operate for over 20 hours after being fully charged. With an explosion-proof design, it has obtained KCs, IECEx, and ATEX certifications, making it safe to use in environments where flammable gases are present.

• Other safety equipment

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to produce a color change, and measurements are taken using the correct wavelength. Since a photometer is used, the results are very accurate. The developed blue color is very intense, allowing for high precision and reproducibility, making it possible to measure truly low concentration values (below 50 ppb) with this method.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to produce color, and measurements are taken using the correct wavelength. Since a photometer is used, the results are very accurate. This method is specialized for phosphates and is particularly useful for measuring high concentrations of phosphates. Even if the color of the measurement sample is yellow, performing an auto-blanking before adding the reagent can correct for the background yellow present in the measurement sample. Additionally, only one type of reagent is used, so the amount of reagent added is very small (1 ml).

• Other measurement, recording and measuring instruments

Square Head Technology The Square Head Vibrator technology, invented and patented by Wyco, offers the following advantages: The square head has up to 27% more surface area than a round head, allowing for faster work completion. Its unique orbital pattern allows for concrete compaction to be performed up to 50% faster. It provides a longer head lifespan compared to other designs. The square head is machined from solid bar stock and is heat-treated for added durability, eliminating thin screw-on head caps and using more material at the corners, which helps the head cool more effectively.

• Other work tools

Ultra-compact O2/CO (H2 comp.) long-life sensor (over 4 years of life under normal load) Automatic CO switch-off and fresh air purge (without interruption of measurement) Protective aluminum housing with stable carrying grip and fixture for carrying grip Wall-mounted: can be fixed to any metal surface with a powerful magnet on the back Floor-standing: foldable with a non-slip inclined stand Condensate trap: equipped with electronic condensate monitor and fine dust filter Built-in printer, paper width 58mm High-performance built-in battery Sampling probe including fixed cone, 3-chamber sampling tube, T-Room sensor included Complete sampling system stored in protective housing Can be charged from the side with the housing closed using the included charger Internal memory capable of 300 measurements Calibration certificate issued after 100% sensor calibration in a temperature-controlled room Free PC software provided - available for download from the website

• Other environmental analysis equipment

O2/CO (H2 Comp) long-life sensor (over 4 years of lifespan under normal load) Automatic CO switch-off and sensor purge (without interruption of measurement) Powered by lithium-ion battery High-performance gas sampling probe (with thermocouple, fixed cone, and high-performance 3-chamber gas sampling tube) Status display showing basic functions, adjustments, and warning messages Ultra-lightweight, robust aluminum housing Includes soot measurement function (compatible with standard supplied applications) Stored in an aluminum transport case with a comfortable shoulder strap Calibration certificate issued after 100% sensor calibration in a constant temperature and humidity chamber Wireless remote controller (standard accessory) Equipped with thermocouple input, mini USB connector (for data transfer to laptop/PC), and SD card slot Display, print, and record measurement data Equipment operation commands (manual CO switch-off, measurement start/end, data processing, etc.) Stable data transmission via wireless (minimizing interference, bypassing metal and concrete obstacles, automatic connection without sudden disconnection, retention of all measurement values, automatic build-up and restoration of wireless connection, etc.)

• Other environmental analysis equipment

ecom-B ecom's most convenient full gas analyzer For inspection and short-term measurement of small combustion systems Freehand measurement with a magnet for attachment to metal surfaces Overload protection for the CO sensor with fresh air without interrupting measurements Long battery operation with built-in Li-Ion battery, allowing up to 150 measurements Long-life sensor for up to 30 O2/CO (H2 comp.) with a lifespan of 5-6 years under normal operation Automatic CO switch-off and fresh air purge (without interrupting measurements) Robust and lightweight aluminum housing equipped with a magnet on the back Extended operating time with built-in lithium-ion battery Includes sampling probe, verification cone, and 3-chamber tube T-room probe Charger Condensate trap with moisture pad and optical monitor Internal memory Calibration certificate issued after 100% sensor calibration in a constant temperature chamber Free PC software capable of saving 00 measurement data

• Other environmental analysis equipment

■ Plug-and-play sensor port, automatic detection, multiple connected water quality analyzers ■ Ideal for groundwater, well, mine, and sewage monitoring ■ Automatic cleaning wiper with automatic contamination prevention feature for easy maintenance ■ Ultra-low power consumption, perfect for outdoor use ■ All-in-one compact housing, built-in transmitter, and sensor ■ Kevlar-reinforced cable with a tensile strength of 1500N ■ Surge protection for power supply and RS485 communication ■ Standard Modbus RTU protocol, direct connection to PLC and HMI ■ Onboard memory allows users to easily calibrate and set sensors in the lab, ready for deployment in various field locations ■ Data monitoring, calibration, setting, and diagnostics via AQCFG software tool

• Analytical Equipment and Devices
• Other measurement, recording and measuring instruments
• Counting Machine

【Product Lineup】 CRY8124 Industrial High-Performance Ultrasonic Camera CRY8125 Industrial High-Performance Ultrasonic Camera EX Model IECEx ⚫ Industry's Best Performance The CRY8124, equipped with 200 microphones, a frequency range of 100kHz, and the fastest processor in the industry, can pinpoint smaller leaks and partial discharges than any other product. ⚫ 8-Inch, 2M Pixel Touch Panel The CRY8124 display features 2K resolution, 6x digital zoom, and a display brightness of 600 nits, allowing for accurate visibility of field conditions even in sunlight. ⚫ Up to 10 Hours of Operation With one rechargeable lithium-ion battery, it can be used continuously for up to 5 hours. The CRY8124 comes standard with two batteries, allowing for a total of up to 10 hours of operation. ⚫ Ergonomic Design and Usability Weighing only 1.4kg, it can be safely operated with one hand. ⚫ 2-Year Warranty The CRY8124 comes with a 2-year warranty.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

⚫Industry-leading performance The CRY8124, equipped with 200 microphones, a frequency range of 100kHz, and the industry's fastest processor, can pinpoint smaller leaks and partial discharges than any other product. ⚫8-inch, 2M pixel touch panel The CRY8124 display features 2K resolution, 6x digital zoom, and a display brightness of 600 nits, allowing for accurate field situation assessment even in sunlight. ⚫Communication methods Data can be transmitted directly to local devices via Bluetooth and WiFi. ⚫Four IEPE sensor inputs Up to four IEPE sensors (such as accelerometers and microphones) and a thermal camera can be added to the system, enabling complex detection scenarios. ⚫Up to 10 hours of operation With one rechargeable lithium-ion battery, continuous use of up to 5 hours is possible. The CRY8124 comes standard with two batteries, allowing for a total of up to 10 hours of operation. ⚫Ergonomic design and usability Weighing only 1.4 kg, it can be safely operated with one hand. ⚫2-year warranty The CRY8124 comes with a 2-year warranty.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

- Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, you can immediately pinpoint and display gas leaks on the screen. It can also detect leaks in difficult locations such as high places or large pipe joints, where conventional gas detectors may struggle. It supports leak detection for various gases, including air, hydrogen, flammable gases, and steam. - Easy-to-read and user-friendly large touch panel The 7-inch touch panel is easy to read, and you can discover leaks with simple operations that only require adjusting two parameters: frequency range and dynamic range. - Analysis and reporting All test results are recorded along with photos, audio, and video, and data compliant with ISO 50001 is generated in Excel format using dedicated software. - Long continuous usage possible With a large-capacity battery, it can be used continuously for over 4 hours. It has an internal storage of 8GB for data storage, and external storage can be expanded up to 256GB using a micro SD card. - Demo available Before implementation, you can use a demo unit to verify whether it can actually detect leaks.

• Other measurement, recording and measuring instruments

Measurement Target Gas Q20 Oxygen Q21 Carbon Dioxide Q22 Oxygen and Carbon Dioxide The Q20 series analyzers feature color display, menu operation settings, calibration functions, built-in sample pumps, and data collection (up to 100,000 values). This unit combines a fast-response sensor for oxygen in a compact and lightweight package (under 1 kg), providing maximum portability and ease of use for all types of gas measurement applications. It operates on battery power and can be easily moved or transported as needed. With low power consumption, it can operate for up to 15 hours before requiring recharging (charger included). This unit is equipped with a robust miniature diaphragm pump that can be adjusted to operate only during sampling with a timing function. The Q20 series is available in several sampling inlet configurations to accommodate various monitoring applications.

• Food Testing/Analysis/Measuring Equipment
• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

The FT311 is a clamp-on type ultrasonic flow meter for small-diameter piping used for liquids. Installation and usage can be completed in just a few minutes, and operation is simple. Because it is clamp-on, it allows for non-contact flow measurement, preventing pressure loss and contamination of the liquid. There is no need for cutting pipes or long-term equipment shutdowns, which reduces labor and time costs. - The measuring liquid does not need to be conductive. - Since there is no need to cut pipes or shut down processes, work can continue without interruption. There are no moving parts, and there is no pressure loss. - Installation can be done without specialized training, using only instructional videos and step-by-step diagrams. - The enclosure is made of PP and fiberglass, making it durable even in acidic or alkaline environments.

• Flow Meter
• Other measurement, recording and measuring instruments

- Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, gas leaks can be pinpointed and displayed on the screen immediately. Leaks in difficult-to-reach areas, such as high places or large pipe joints, can also be detected, which are challenging for conventional gas detectors. Regardless of the type of gas, leaks of flammable gases and vapors can be detected. - Easy-to-read and user-friendly display The 7-inch touchscreen allows for easy operation to discover leaks. By simply adjusting two parameters, frequency range and dynamic range, most testing requirements can be met. - Analysis and reporting All test results are recorded along with photos, audio, and video, and a dedicated software generates reports compliant with ISO 50001 in an editable Excel format. - Long continuous usage With a large-capacity battery, it can be used continuously for over 4 hours. Data can be stored in the internal 8GB storage, and external storage can be expanded up to 256GB using a micro SD card.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

【Product Lineup】 CRY2620 Industrial Ultrasonic Camera Catalog Entry Model CRY2623 Industrial Ultrasonic Camera Catalog Standard Model CRY2624 Industrial Ultrasonic Camera Catalog ATEX Model - Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, pinpoint gas leaks can be displayed on the screen immediately. Leaks in difficult-to-detect locations, such as high places or large pipe joints, can also be detected, which is challenging for standard gas detectors. It can detect leaks of flammable gases and vapors, regardless of the type of gas. - Easy-to-read and user-friendly display The 7-inch touchscreen allows for easy operation to discover leaks. By simply adjusting two parameters, frequency range and dynamic range, most testing requirements can be met. - Detection of partial discharge (PRPD) The PRPD mapping function helps detect partial discharges such as surface discharge, floating discharge, and corona discharge, assisting in diagnosing discharge failures. - ATEX explosion-proof certification ATEX- II 3 G Ex ic IIC T5 Gc

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

- Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, gas leaks can be pinpointed and displayed on the screen immediately. Leaks in difficult-to-reach areas, such as high places or large pipe joints, can also be detected, which are challenging for standard gas detectors. Regardless of the type of gas, leaks of flammable gases and vapors can also be detected. - Easy-to-read and user-friendly display With a 7-inch touchscreen, leaks can be easily discovered with simple operations. By adjusting just two parameters—frequency range and dynamic range—most testing requirements can be met. - Analysis and reporting All test results are recorded along with photos, audio, and video, and a dedicated software generates reports compliant with ISO 50001 in an editable Excel format. - Detection of partial discharge (PRPD) The PRPD mapping function detects partial discharges such as surface discharge, floating discharge, and corona discharge, helping to diagnose discharge failures. - ATEX explosion-proof certification ATEX- II 3 G Ex ic IIC T5 Gc

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

- Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, pinpoint gas leaks can be displayed on the screen immediately. Leaks in difficult-to-reach areas, such as high places or large pipe joints, can also be detected, which are challenging for standard gas detectors. Regardless of the type of gas, leaks of flammable gases and vapors can be detected. - Easy-to-read and user-friendly display With a 7-inch touchscreen, leaks can be easily discovered with simple operations. By adjusting just two parameters, frequency range and dynamic range, most testing requirements can be met. - Analysis and reporting All test results are recorded along with photos, audio, and video, and a dedicated software generates reports compliant with ISO 50001 in an editable Excel format. - Detection of partial discharge (PRPD) The PRPD mapping function detects partial discharges such as surface discharge, floating discharge, and corona discharge, helping to diagnose discharge failures.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

- Visualization of compressed air and gas leaks By visualizing leaks in compressed air and gas, gas leaks can be pinpointed and displayed on the screen immediately. Leaks in difficult-to-reach areas, such as high places or large pipe joints, can also be detected, which are challenging for conventional gas detectors. Regardless of the type of gas, leaks of flammable gases and vapors can be detected. - Easy-to-read and user-friendly display With a 7-inch touchscreen, leaks can be easily discovered with simple operations. By adjusting just two parameters, frequency range and dynamic range, most testing requirements can be met. - Analysis and reporting All test results are recorded along with photos, audio, and video, and a dedicated software generates reports compliant with ISO 50001 in an editable Excel format. - Long continuous usage With a large-capacity battery, it can be used continuously for over 4 hours. Data can be stored in the internal 8GB storage, and it can be expanded up to 256GB using an external micro SD card.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment

In online water analysis, the filtration of samples often places a significant burden on the system, so it is essential that the analysis system has high availability and low maintenance needs, as well as guarantees defined and consistent filter characteristics. The LFE USR-F filter system helps meet these requirements by using filter elements in a cross-flow configuration. The filter elements are irradiated at adjustable intervals and durations using ultrasonic energy. The ultrasonic generator creates cavitation in the sample water, which acts as the coupling medium. The collapse of a vast number of tiny cavitation bubbles provides the well-known excellent cleaning effect associated with this method. The particles dislodged from the filter elements are carried away by the main sample flow. The filtered sample can be continuously extracted from the cleaned filter elements by the connected analysis device, significantly reducing maintenance and extending the lifespan. The LFE sample filter consists of a corrosion-resistant filter unit that includes an ultrasonic transducer and a control unit equipped with time-controlled or remote-controlled ultrasonic generators.

• Ultrasonic Cleaner

Measurement Principle Potassium iodide reacts with chlorine in acidic media, producing a yellow color. When a sufficient amount of titrant is added, it becomes colorless again, allowing the concentration of chlorine to be calculated based on the amount of titrant used. Features Potassium iodide reacts with chlorine in acidic media, producing a yellow color. When a sufficient amount of titrant is added, it becomes colorless again, allowing the concentration of chlorine to be calculated based on the amount of titrant used.

• Other measurement, recording and measuring instruments

Advantages This method is a very simple chlorine measurement technique. It consumes a small amount of reagents, and chromate ions, which interfere in amperometric methods, do not cause interference here. Conductivity and calcium, which are significant interferences in the DPD method, do not interfere either. Measurement Principle – ISE Electrode Analysis is performed using the Standard Known Addition (SKA) method. Two measurements are taken, and the concentration is calculated from the difference between the two and the slope during the calibration curve creation. The reference for calculating the results is not an absolute value but the relative difference in mV, so any changes that may occur in the matrix sample are corrected by both of these lectures. This allows for the avoidance of external interference. Measurement Method It is based on the measurement of iodide. Through the reaction of chlorine, buffer solution, and potassium iodide reagent, chlorine reacts with potassium, releasing iodide. Chlorine displaces iodide. Subsequently, the ISE electrode measures the iodide, and the amount of iodide measured corresponds to the chlorine in the sample.

• Other measurement, recording and measuring instruments

Measurement Method – Colorimetric After placing the sample in the measurement cell, reagents are added to adjust the solution to the desired conditions (pH, valence, etc.). A blank is then performed to correct for disturbances in temperature and turbidity. After that, the final reagent is added, which reacts with the solution to produce a color that is measured. Measurement Principle This method is based on the oxidation of As(III) to As(IV). Subsequently, when the necessary reagents are added, As(IV) reacts with molybdate to form a molybdenum arsenic complex. This complex is reduced and exhibits a blue color, which is proportional to the arsenic concentration.

• Other measurement, recording and measuring instruments

Free Chlorine Total Chlorine Combined Chlorine pH Total Hardness Total Alkalinity Iron Copper Nitrate Nitrite

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of acetic acid gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of hydrogen bromide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ The sensor module can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen cyanide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, one unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of NOx gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large, easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of sulfur dioxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of nitrogen dioxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of nitrogen monoxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of bromine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of fluorine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of ammonia gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs enable the issuance of alerts and the recording of measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to develop color and is measured using the correct wavelength. Since a photometer is used, the results are very accurate.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to produce color, and measurements are taken using the correct wavelength. Since a photometer is used, the results are very accurate.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen sulfide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large, easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of formaldehyde gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of iodine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

In power plants, heavy industrial machinery such as turbines and pumps are used. These machines contain hundreds of liters of lubricating oil, which can leak into process water due to wear and tear. This water is purified before being discharged, but it is used downstream as domestic and industrial water. By continuously monitoring the discharge with an oil film detector, it is possible to detect oil leaks and take prompt measures.

• Other measurement, recording and measuring instruments

Oil refining facilities are often located near rivers and coastal areas, taking into account cooling water and transportation convenience. Oil spills due to facility malfunctions or accidents pose a risk of contaminating rivers and ports, and in the event of a spill, it is necessary to review operations and implement measures to mitigate or avoid damage. By installing LDI oil film detectors in drainage facilities such as oil-water separation tanks, it is possible to detect the risk of oil leakage early and take countermeasures.

• Other measurement, recording and measuring instruments

Water supply and sewage treatment facilities handle all types of wastewater, whether from households or industries. The inflow of oil poses a risk of contaminating filters and damaging bioreactors. By installing LDI oil film detectors, it is possible to detect such oil inflows early and protect the facilities.

• Other measurement, recording and measuring instruments

Ports and oil terminals that receive cargo ships from around the world may have ballast water discharged from cargo ships containing oily residues and pollutants. By using oil film detectors to monitor for oil leaks, it becomes possible to detect them early and minimize damage.

• Other measurement, recording and measuring instruments