サニー・トレーディング Product Lineup

In online water analysis, the filtration of samples often places a significant burden on the system, so it is essential that the analysis system has high availability and low maintenance needs, as well as guarantees defined and consistent filter characteristics. The LFE USR-F filter system helps meet these requirements by using filter elements in a cross-flow configuration. The filter elements are irradiated at adjustable intervals and durations using ultrasonic energy. The ultrasonic generator creates cavitation in the sample water, which acts as the coupling medium. The collapse of a vast number of tiny cavitation bubbles provides the well-known excellent cleaning effect associated with this method. The particles dislodged from the filter elements are carried away by the main sample flow. The filtered sample can be continuously extracted from the cleaned filter elements by the connected analysis device, significantly reducing maintenance and extending the lifespan. The LFE sample filter consists of a corrosion-resistant filter unit that includes an ultrasonic transducer and a control unit equipped with time-controlled or remote-controlled ultrasonic generators.

• Ultrasonic Cleaner

Measurement Principle Potassium iodide reacts with chlorine in acidic media, producing a yellow color. When a sufficient amount of titrant is added, it becomes colorless again, allowing the concentration of chlorine to be calculated based on the amount of titrant used. Features Potassium iodide reacts with chlorine in acidic media, producing a yellow color. When a sufficient amount of titrant is added, it becomes colorless again, allowing the concentration of chlorine to be calculated based on the amount of titrant used.

• Other measurement, recording and measuring instruments

Advantages This method is a very simple chlorine measurement technique. It consumes a small amount of reagents, and chromate ions, which interfere in amperometric methods, do not cause interference here. Conductivity and calcium, which are significant interferences in the DPD method, do not interfere either. Measurement Principle – ISE Electrode Analysis is performed using the Standard Known Addition (SKA) method. Two measurements are taken, and the concentration is calculated from the difference between the two and the slope during the calibration curve creation. The reference for calculating the results is not an absolute value but the relative difference in mV, so any changes that may occur in the matrix sample are corrected by both of these lectures. This allows for the avoidance of external interference. Measurement Method It is based on the measurement of iodide. Through the reaction of chlorine, buffer solution, and potassium iodide reagent, chlorine reacts with potassium, releasing iodide. Chlorine displaces iodide. Subsequently, the ISE electrode measures the iodide, and the amount of iodide measured corresponds to the chlorine in the sample.

• Other measurement, recording and measuring instruments

Measurement Method – Colorimetric After placing the sample in the measurement cell, reagents are added to adjust the solution to the desired conditions (pH, valence, etc.). A blank is then performed to correct for disturbances in temperature and turbidity. After that, the final reagent is added, which reacts with the solution to produce a color that is measured. Measurement Principle This method is based on the oxidation of As(III) to As(IV). Subsequently, when the necessary reagents are added, As(IV) reacts with molybdate to form a molybdenum arsenic complex. This complex is reduced and exhibits a blue color, which is proportional to the arsenic concentration.

• Other measurement, recording and measuring instruments

Free Chlorine Total Chlorine Combined Chlorine pH Total Hardness Total Alkalinity Iron Copper Nitrate Nitrite

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of acetic acid gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of hydrogen bromide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ The sensor module can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen cyanide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, one unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of NOx gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large, easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of sulfur dioxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of nitrogen dioxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of nitrogen monoxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of bromine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of fluorine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of ammonia gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs enable the issuance of alerts and the recording of measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to develop color and is measured using the correct wavelength. Since a photometer is used, the results are very accurate.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to produce color, and measurements are taken using the correct wavelength. Since a photometer is used, the results are very accurate.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen sulfide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large, easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of formaldehyde gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging sensor modules, a single unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of iodine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

In power plants, heavy industrial machinery such as turbines and pumps are used. These machines contain hundreds of liters of lubricating oil, which can leak into process water due to wear and tear. This water is purified before being discharged, but it is used downstream as domestic and industrial water. By continuously monitoring the discharge with an oil film detector, it is possible to detect oil leaks and take prompt measures.

• Other measurement, recording and measuring instruments

Oil refining facilities are often located near rivers and coastal areas, taking into account cooling water and transportation convenience. Oil spills due to facility malfunctions or accidents pose a risk of contaminating rivers and ports, and in the event of a spill, it is necessary to review operations and implement measures to mitigate or avoid damage. By installing LDI oil film detectors in drainage facilities such as oil-water separation tanks, it is possible to detect the risk of oil leakage early and take countermeasures.

• Other measurement, recording and measuring instruments

Water supply and sewage treatment facilities handle all types of wastewater, whether from households or industries. The inflow of oil poses a risk of contaminating filters and damaging bioreactors. By installing LDI oil film detectors, it is possible to detect such oil inflows early and protect the facilities.

• Other measurement, recording and measuring instruments

Ports and oil terminals that receive cargo ships from around the world may have ballast water discharged from cargo ships containing oily residues and pollutants. By using oil film detectors to monitor for oil leaks, it becomes possible to detect them early and minimize damage.

• Other measurement, recording and measuring instruments

In seawater desalination plants, RO membranes are used. In this case, if contaminated seawater is taken in, there is a risk that the pipes and pumps will become contaminated, leading to a decrease in the plant's performance. By installing an LDI oil film detector at the intake, it is possible to quickly detect water contaminated by oil and protect the facility.

• Other measurement, recording and measuring instruments

Method – Colorimetric Analysis After adding the sample to the measurement cell, several reagents are added to adjust the solution to the desired conditions (such as pH and valence elements). Next, a blank is created to correct for disturbances in temperature and turbidity. Then, the final reagent is added, which reacts with the solution to produce color, and measurements are taken using the correct wavelength. Since a photometer is used, the results are very accurate.

• Other measurement, recording and measuring instruments

The CTD series is a compact, simple, and cost-effective multi-parameter water quality analyzer for conductivity, water depth, and water temperature. It can be easily deployed in groundwater and surface water to monitor multiple parameters such as conductivity, salinity, TDS, resistivity, density, water level, pressure, and temperature. With its robust IP68 underwater housing, it is ideal for various applications including aquifer characterization, construction and mining, drilling and wells, coastal estuaries and wetlands, lakes and reservoirs.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of ozone gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of chlorine dioxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs enable the issuance of warnings and recording of measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of chlorine gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, one unit can measure multiple gases. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

DPDSense uses 520nm emitted light to detect color changes when DPD reacts with chlorine to form a pink solution. The intensity of the pink color (light absorption) is proportional to the amount of free chlorine and total chlorine present in the sample. This technology is widely accepted around the world as a standard method for online monitoring of residual chlorine levels in water. DPDSense can measure free chlorine, total chlorine, or both. *For more details, please download the PDF or feel free to contact us.*

• Other measurement, recording and measuring instruments
• Disinfectant
• Food Testing/Analysis/Measuring Equipment

This is a gas detector that can easily measure the concentration of ethylene oxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs enable issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By exchanging the sensor module, it is possible to measure multiple gases with a single unit. ■ The sensor module can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of hydrogen chloride gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large, easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen fluoride gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, making it easy to replace without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is type. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs allow for issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, multiple gases can be measured with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can easily measure the concentration of hydrogen peroxide gas in the air with simple operations. 【Features - Fixed Gas Detector】 ■ Uses smart sensors, allowing for easy replacement without the need for on-site calibration. ■ Intrinsically safe explosion-proof structure (ATEX, IECEx) - only for is types. ■ Large and easy-to-read LCD display. ■ External outputs such as alarms and analog outputs enable the issuance of warnings and recording of measurement values. 【Features - Portable Gas Detector】 ■ Can pinpoint gas leak locations. ■ By replacing the sensor module, it is possible to measure multiple gases with a single unit. ■ Sensor modules can be easily replaced. ■ Large LCD display with backlight allows for clear visibility even in dark places. ■ Alarm function activates a buzzer sound and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This is a gas detector that can measure the concentration of peracetic acid gas in the air with simple operations. 【Features - Fixed Gas Detector】 - Uses smart sensors, allowing for easy replacement without the need for on-site calibration. - Designed with intrinsic safety and explosion-proof structure (ATEX, IECEx) - only for is type. - Large and easy-to-read LCD display. - External outputs such as alarms and analog outputs enable issuing warnings and recording measurement values. 【Features - Portable Gas Detector】 - Can pinpoint gas leak locations. - By replacing the sensor module, one unit can measure multiple gases. - Sensor modules can be easily replaced. - Large LCD display with backlight for clear visibility in dark places. - Alarm function activates a buzzer and lights up the display when the indicated value reaches the set value. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

- You can measure the ammonia concentration in various measurement liquids such as water supply, drinking water, drainage, and seawater. - The measurement method using ion-selective electrodes allows for automatic calibration and automatic cleaning for each analysis, enabling high-precision measurements. - It is possible to measure low concentrations of ammonia below 1 mg/L with high precision. - High concentrations of ammonia above 100 mg/L can also be measured by utilizing the dilution function. - The small variety and consumption of reagents help to keep running costs low. - The Fast Loop sampling system prevents contamination of the measurement liquid within the measurement section. - An alarm can be triggered using alarm contacts to notify of abnormalities. - Measurement values can be externally output and recorded with a 4-20 mA current output. *For more details, please check the materials available for download in PDF format.

• Water quality testing

This is a collection of case studies on online measurement of temperature, dissolved oxygen, pH, and nitrogen waste: ammonia, ammonium, nitrite, and nitrate in land-based aquaculture (RAS).

• Other measurement, recording and measuring instruments

- Due to its diaphragm type, it has a structure that is less susceptible to interference from other components. - pH measurement is available as an option. - It meets the IP65 standard for waterproof and dustproof specifications. (Sensor: IP68) - It has an easily maintainable design structure.

• Other measurement, recording and measuring instruments

The VISION turbine flow meter is a compact turbine flow meter for liquids. It is small, lightweight, low-cost, and requires no maintenance. 【Features】 - Lightweight body weighing approximately 20g - Supports flow rates up to 65 l/min - Compatible with high temperatures from -20℃ to a maximum of 100℃ - Complies with food sanitation laws It complies with food sanitation laws, making it suitable for use in beverages such as juice and in cooking and manufacturing processes. Since it can handle temperatures up to 100℃, it can be used for high-temperature water in cooking utensils and coffee machines. *For more details, please check the materials available for download in PDF format.

• Flow Meter

Maximum measurement range: An inline hydrogen peroxide meter with a range of 0 - 20%. The device is integrated into a panel board and can be easily installed.

• Other measurement, recording and measuring instruments

The FT101 is an ultrasonic flow meter for liquids. Installation and use can be completed in just a few minutes, and operation is simple. Being clamp-on allows for non-contact flow measurement, preventing pressure loss and liquid contamination. Since there is no need for pipe cutting or prolonged equipment downtime, it reduces labor costs and time expenses.

• Flow Meter
• Other measurement, recording and measuring instruments

A summary of case studies on the measurement and control of ammonia, aluminum, and manganese in drinking water treatment facilities has been compiled.

• Other measurement, recording and measuring instruments

Sea Water Test Reagent Disk Measurement Targets and Ranges Alkalinity 0 – 300 ppm / 17.0 dKH Ammonia 0.0 – 3.0 ppm Calcium 200 - 800 ppm Magnesium 500 – 2200 ppm Nitrate 0 – 60 ppm Nitrite 0.0 – 2.0 ppm Phosphate 0.0 – 2.0 ppm Freshwater Test Reagent Disk Measurement Targets and Ranges Alkalinity 0 – 250 ppm / 14.0 dKH Ammonia 0.0 – 3.0 ppm Hardness 0 – 500 ppm / 28.0 dGH Nitrate 0 – 300 ppm Nitrite 0.0 – 2.0 ppm Phosphate 0.0 - 2.0 ppm

• Other measurement, recording and measuring instruments