スペースワークス List of Products and Services

1. Various abnormal temperatures can be detected with zero standby power. (Eco technology) 2. By being able to detect various abnormal temperatures, inspection work and maintenance management can be carried out reliably and safely. 3. Abnormal temperatures of various industrial and electrical equipment can be monitored on a daily basis. 4. It can prevent ignition caused by abnormal temperatures of industrial and electrical equipment that could lead to a fire. 5. By using shape memory alloy (restoration) and wire (softening) to create a short circuit (contact) between the two wires, abnormal temperatures are detected and converted into a signal. [Set temperature 80°C] 6. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 7. It can detect temperature and signal simultaneously, and the circuit configuration (switching function) is simple and low-cost. 8. Shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 9. The operation is a physical action that does not require power, has no malfunction, and can be used accurately and swiftly for many years. 10. Temperature detection can be done directly without the need for measuring instruments. 11. It is a non-reset type that allows for confirmation after activation. (Once detected, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Safety Sensors
• Sensors

■Features of Ceiling Holes (Construction) 1. Wiring and cabling in the ceiling space can be done from indoors after the ceiling work is completed. 2. Wiring for information and communication systems (IT) and various electrical works can be easily done from indoors in the ceiling space. 3. Not only electrical wires, but also piping for air conditioning refrigerants and air can be installed from indoors to the ceiling space. 4. Wiring can be easily done from indoors to the ceiling space without being exposed, preserving the interior design of the building, and achieving a good finish and appearance. 5. Construction time can be reduced (by half) and costs can be lowered (by a third), allowing for safe work and easier electrical construction. ■Features of Ceiling Holes (Product) 1. It is a round inspection opening (entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even in ceilings without framing materials (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of Ceiling Hole Construction Technology 1. Electrical work (wiring in the ceiling space) can be done from inside after the ceiling construction is completed. 2. Wiring in the ceiling space and installation of wiring devices and various sensors for new construction, renovations, and extensions can be easily done from inside. 3. Wiring in the ceiling space and installation of wiring devices and various sensors can be easily done from inside without exposed wiring, preserving the interior design of the building, and achieving a good finish and appearance. 4. Construction time can be reduced (by half) and construction costs can be lowered (by one-third), allowing for safe work and easy electrical construction. 5. Connection verification and inspection can be easily done from inside, making maintenance tasks easier.

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of the Ceiling Stand 1. The installation of ceiling-mounted detectors, wiring, and fixture mounting can be done collectively after the ceiling work is completed. 2. Fire testing, operation confirmation, and installation position verification of ceiling-mounted detectors can be performed from indoors. 3. Wiring to the ceiling space can be done from indoors without exposed wiring, maintaining the building's aesthetic and providing a good finish. 4. Construction time is reduced (by half), costs are lowered (by one-third), work can be done safely, and fire prevention equipment installation becomes easier. 5. Maintenance tasks and fire prevention management become safer and easier.

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of the Sealing Stand 1. Installation of fire protection equipment, wiring, and mounting of fire detectors can be done collectively after the ceiling work is completed. 2. Wiring in the ceiling space and installation of fire detectors for new construction, renovations, and extensions can be easily done from indoors. 3. Fire tests, confirmation of operation, and verification of installation positions for ceiling space detectors can be conducted from indoors. 4. Wiring in the ceiling space and installation of fire detectors can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 5. Reduction of construction time (by half), decrease in costs (by one-third), safe working conditions, and ease of fire protection equipment installation. 6. Fire tests, confirmation of operation, and verification of installation positions can be conducted from indoors, making maintenance work safe and easy.

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of the Sealing Unit (Installation) 1. Wiring in the ceiling and installation of wiring devices can be done from indoors after the ceiling work is completed. 2. Wiring in the ceiling and installation of wiring devices for various electrical works during building renovations and extensions can be easily done from indoors. 3. Wiring in the ceiling and installation of wiring devices can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a good finish and appearance. Additionally, maintenance work becomes easier. 4. Construction time can be reduced (by half) and construction costs can be lowered (by one-third), allowing for safe work and easier electrical construction. ■Features of the Sealing Unit (Product) 1. It is a round inspection opening (entry point) with wiring devices that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling base materials, and no specialized contractors are required. 4. It can be installed on ceilings without base materials (such as traditional Japanese room ceilings). 5. Installation or replacement of wiring devices can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection verification and inspection can be performed without removing wiring devices, and the direction and arrangement can be freely changed (by removing the cover) (changing the direction of the cover).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of the Joint Inspection Opening (Construction) 1. It can be easily installed from indoors onto the ceiling without any discomfort and with a good appearance. 2. It can be installed on the ceiling surface at the connection (joint) point of the wiring in the ceiling space from indoors. 3. The cover can be opened from indoors, allowing for easy inspection and connection work at the joint of the wiring in the ceiling space. 4. By periodically inspecting the connections of the ceiling wiring, which can be a cause of fire, by opening the cover from indoors, it is possible to prevent equipment damage and fires caused by abnormal heat due to overload or poor connections. 5. The cover can be opened from indoors to perform connection replacement work for miswiring or poor connections of the ceiling wiring, eliminating the need to damage the ceiling finishing materials. 6. It can be used not only for connecting general electrical wiring but also for connecting communication lines in low-voltage work. ■Features of the Joint Inspection Opening (Product) 1. It is a joint inspection opening that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials, and no specialized contractors are required. 4. It can be installed on ceilings without substrate materials (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of the attic fire alarm bracket (Installation) 1. The installation of the attic fire alarm can be easily done from indoors, allowing for early detection of attic fires. 2. The cover can be opened from indoors, making it easy to test and inspect the attic fire alarm. 3. A fire alarm can also be installed on the cover, allowing for coordination between indoor and attic fire alarms. 4. The installation of the attic fire alarm bracket on the ceiling surface can be done easily. 5. It can be installed neatly and unobtrusively without compromising the building's appearance. 6. Work such as installation of equipment, fire testing, and inspections can be safely performed from indoors without entering the attic. ■Features of the attic fire alarm bracket (Product) 1. This is an attic fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling framing materials, and no specialized contractors are required. 4. It can be installed even on ceilings without framing materials (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other safety equipment

■Features of the Ceiling Hole for Emergency Lights (Installation) 1. Wiring in the ceiling space and installation of emergency lights can be done from inside the room after the ceiling work is completed. 2. Wiring in the ceiling space and installation of emergency lights for new construction, renovations, and extensions can be easily done from inside the room. 3. Wiring in the ceiling space and installation of emergency lights can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and tidy finish. 4. Construction time can be reduced (by half) and construction costs can be lowered (by one-third), allowing for safe work and easy installation of emergency light systems. Maintenance work can also be easily performed. ■Features of the Ceiling Hole for Emergency Lights (Product) 1. It is a round inspection opening (entry point) for emergency lights that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work on ceiling finishing materials or ceiling substrate materials is required, and specialized contractors are not needed. 4. It can be installed on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of emergency lights can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction can be freely changed (by removing the cover) (changing the direction of the cover).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of Fire Sealing Holes (Installation) 1. Wiring in the ceiling space and installation of fire equipment can be done from indoors after the ceiling work is completed. 2. Wiring in the ceiling space and installation of fire equipment for new construction, renovations, and extensions can be easily done from indoors. 3. Wiring in the ceiling space and installation of fire equipment can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a good finish and appearance. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy fire equipment installation. 5. Confirmation and inspection of connections can be easily done from indoors, making maintenance tasks easier. ■Features of Fire Sealing Holes (Product) 1. A fire sealing hole (fire round entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling base materials, and no specialized contractors are required. 4. It can be installed even in ceilings without base materials (such as traditional Japanese room ceilings). 5. Installation or replacement of fire equipment on the cover can be easily done from the floor instead of the ceiling (by removing the cover). 6. Confirmation and inspection of connections can be done without removing the fire equipment, and the direction can be freely changed.

• LAN construction and wiring work
• PBX/IP phone
• Other safety equipment

■Features of Security Ceiling Holes (Installation) 1. Wiring in the ceiling and installation of security devices can be done from indoors after the ceiling work is completed. 2. Installation of security equipment in new construction, renovations, and extensions can be easily done from indoors. 3. Wiring and installation of security devices can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced by half and costs can be lowered by a third, allowing for safe work and easy installation of security equipment. 5. Connection verification and inspections can be easily performed from indoors, making maintenance tasks easier. ■Features of Security Ceiling Holes (Product) 1. A security ceiling hole (round entry point for security) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work on ceiling finishing materials or ceiling framing is required, and no specialized contractors are needed. 4. It can be installed in ceilings without framing (such as traditional Japanese room ceilings). 5. Installation or replacement of security devices can be easily done on the floor rather than the ceiling (by removing the cover). 6. Connection verification and inspections can be performed without removing the security devices, and the direction can be freely changed.

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of Firefighting Sealing Holes (Construction) 1. The installation of pipes, conduits, and heads can be done from inside the room after the ceiling work is completed. 2. It does not result in exposed wiring, preserving the interior design of the building, and can be finished neatly and attractively. 3. It allows for a reduction in the construction period of sprinkler work (by half) and a decrease in construction costs (by one-third), enabling safe work. 4. The direction of the heads attached to the cover can be freely adjusted and replaced. 6. Confirmation and inspection of the connections of the ceiling pipes can be easily done from inside the room, making maintenance work easier. 7. The installation of pipes, conduits, and heads for sprinkler work in new constructions, renovations, and extensions can be easily done from inside the room. ■Features of Firefighting Sealing Holes (Product) 1. It is a firefighting sealing hole that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other safety equipment

■Features of Gas Leak Detector Brackets (Installation) 1. The gas leak detector can be installed from inside the room into the ceiling space, allowing for early detection of gas leaks in the ceiling. 2. The cover can be opened from inside the room, making it easy to test and inspect the gas leak detector in the ceiling space. 3. The installation of the gas leak detector brackets can be done neatly and easily without compromising the building's appearance. 4. Installation, fire testing, and inspection of the gas leak detector can be safely performed from inside the room without entering the ceiling space. ■Features of Gas Leak Detector Brackets (Product) 1. This is a gas leak detector bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. No repair work on ceiling finishing materials or ceiling framing materials is required. 4. It can be installed on ceilings without framing materials (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of Cockroach Sealing Holes (Installation) 1. Cockroaches in the attic can be exterminated from inside the room. 2. It can be easily installed from inside the room onto the ceiling, allowing the lid to be opened for the placement of extermination supplies in the attic. 3. It can be installed easily and neatly without compromising the building's appearance. ■Features of Cockroach Sealing Holes (Product) 1. It is a ceiling-mounted fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. No repair work on ceiling finishing materials or ceiling framing is required, and no specialized contractors are needed. 4. It can be installed even on ceilings without framing (such as traditional Japanese room ceilings).

• LAN construction and wiring work
• PBX/IP phone
• Other network tools

■Features of Temperature Memory Sensor 1. It operates through physical action without the need for power supply or measuring instruments, allowing direct temperature sensing and signal generation. 2. The operation allows for direct temperature detection through physical action, and the circuit configuration can be simple and low-cost. 3. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 4. It can continuously monitor various abnormal temperatures. 6. This product integrates shape memory alloy with the wire. Set temperature (80°C). 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires for temperature sensing and signal generation. 8. It is an eco-friendly technology product with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state permanently once activated. 10. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 11. It is a non-resettable type that allows for confirmation after activation. ■Contact Information for Inquiries 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Safety Sensors
• Sensors
• Sensors

■Features of Temperature Memory Sensor (with terminals) 1. Capable of detecting abnormal temperatures inside various distribution boards, control panels, and operation panels (set temperature 80°C). 2. Capable of detecting abnormal temperatures inside industrial equipment and electrical devices. 3. Operates through a physical mechanism that directly senses temperature and generates a signal without the need for power supply or measuring instruments. 4. The operation allows for direct temperature detection through physical action, enabling a simple circuit design at a low cost. 5. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 6. Capable of routinely monitoring various abnormal temperatures, ensuring reliable and safe maintenance management. 7. A product that integrates shape memory alloy with electrical wires and has crimped terminals attached (set temperature 80°C). 8. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 9. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 10. A product that meets the performance standards of fixed temperature type detectors (Type 1, 120 seconds) as specified by fire safety regulations. 11. Non-resettable, allowing for confirmation after activation (once activated, cannot be reactivated; the activated location must be removed and reconnected).

• Sensors
• Safety Sensors
• Sensors

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Safety Sensors
• Sensors

■Features of Temperature Sensing Wire (70℃) 1. It can directly sense temperature and generate signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches 70℃, the two wires short-circuit to sense the temperature and generate a signal. 3. It allows for the regular monitoring of various abnormal temperatures, ensuring reliable and safe maintenance management. 4. It can detect abnormal temperatures in various devices early, preventing equipment damage and fires. 5. By simply extending the wiring, it enables extensive abnormal temperature monitoring. 6. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 7. It is a product that integrates numerous shape memory alloys at equal intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. It is a product that meets the performance standards of fixed temperature detectors as specified by fire safety regulations (120 seconds). 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated section can be deleted and reconnected.)

• Safety Sensors
• Sensors
• Sensors

■Features of Abnormal Temperature Sensing Wire 1. Capable of detecting various types of abnormal temperatures. 2. Able to detect abnormal temperatures in industrial equipment, electrical devices, and electrical wiring. 3. Can detect abnormal temperatures early to prevent equipment damage and fires. 4. Allows for routine collective monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 5. Directly senses temperature through physical operation without the need for power supply or measuring devices, detecting it as a signal. 6. When the surrounding temperature reaches an abnormal temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 7. A product that integrates multiple shape memory alloys at equal intervals along an extended wire. (Set temperature: 80°C) 8. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit the two wires, sensing temperature and generating a signal. 9. A simple, easy-to-use product with good accuracy, featuring zero standby power consumption through its switching function, making it an eco-friendly technology. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. A product that meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. 12. Non-resettable, allowing for confirmation after activation. (Once sensing is activated / cannot be reset. Delete the activated location and change the connection.)

• Safety Sensors
• Sensors
• Sensors

This product is a fire memory sensor with a set temperature of 80°C. It features a shape memory alloy attached to a wire in a coiled form, creating an integrated product. When the surrounding temperature reaches 80°C, the wire softens, and the shape memory alloy constricts the wire (restoring it) to short-circuit the two wires, generating a temperature sensing signal (80°C). It can be installed in equipment or locations at risk of fire, alerting the surroundings with alarms to prevent fires and providing daily monitoring with zero standby power for the switching function, making it an eco-friendly technology product. It is a non-resettable type, allowing for fire confirmation after activation. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. Set temperature: 80°C. ■ Contact information regarding this matter 2-2-8 Minami Tsutsujigaoka, Kameoka City, Kyoto Prefecture, 621-0847 Space Works Contact: Wada wadakame@siren.ocn.ne.jp TEL: 0771-25-3430 / FAX: 0771-25-4932

• Safety Sensors
• Safety switch
• Sensors

■Features of Fire Detection Wire 1. By extending the wiring, the fire detection circuit is completed, creating a wide-ranging fire alert area. 2. Wiring in buildings under construction, ships being built, aircraft, and vehicles completes the fire detection circuit. 3. Wiring around the exterior of residential garages, storage sheds, and warehouses completes the fire detection circuit. 4. Wiring in the precincts of temples/shrines and in livestock buildings completes the fire detection circuit. 5. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring devices. 6. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 7. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 8. Utilizing the softening of the wire and the recovery of shape memory alloys, the two wires short-circuit to sense the temperature and signal. 9. It is an eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reset; the activated location must be removed and reconnected).

• Safety Sensors
• Sensors
• Sensors

■Features of Fire Detection Line (with Fire Push Button) 1. By simply pulling out and wiring the fire detection line (with fire push button), the fire detection circuit is completed, creating a fire alert area. The fire detection line (with fire push button) can be rolled up and moved to the necessary location for wiring. 2. Anyone can wire the fire detection line (with fire push button) by pulling it out. 3. The fire detection line (with fire push button) can be wired in places at risk of fire or arson, such as buildings, industrial machinery, and the grounds or buildings of temples/shrines, allowing for fire alert areas ranging from small to large. 4. The fire detection line (with fire push button) can be wired in outdoor and indoor large facilities such as forests near residential areas, parks, public facilities, and event venues, enabling a response to extensive fire alert areas. 【Notes】: Features of Fire Detection Line 1. It is an eco-friendly technology product with zero standby power due to its switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Activation is a physical action that does not require power, ensuring no malfunctions and allowing for swift, precise use over many years. 4. Direct temperature sensing (temperature detection) can be done without measurement instruments. 5. The fire detection line can be used for indoor/outdoor wiring. 6. It is a non-reset type that allows for confirmation after activation.

• Safety Sensors
• Sensors
• Sensors

■Features of Temperature Detection Sensors 1. Monitors abnormal temperatures of electrical wires on a daily basis and can detect abnormal temperatures. 2. Monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment on a daily basis. 3. Can be wired similarly to electrical wires in electrical equipment. 4. Utilizes shape memory alloy (restoration) and wire (softening) to detect abnormal temperatures by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is 70°C. 5. A simple, easy-to-use product with good accuracy, featuring eco-technology with zero standby power due to its switching function. 6. Capable of detecting temperature and generating signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Can be used for wiring both indoors and outdoors. 11. Non-return type allows for confirmation after operation. (Once sensing is activated / cannot be reactivated. Delete the activated location and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

■Characteristics of Temperature Detection Lines 1. Abnormal temperatures of electrical wires can be monitored regularly and detected collectively. 2. Abnormal temperatures of power (control) equipment and electrical (load) equipment can be monitored regularly and detected collectively. 3. Wiring similar to that of electrical equipment can be achieved. 4. By utilizing shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, abnormal temperatures are detected and converted into signals. 5. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 6. It can detect temperature and signals simultaneously, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction, and it can be used accurately and swiftly for many years. 9. Temperature detection can be performed directly without the need for measuring instruments. 10. It can be used for indoor and outdoor wiring. 11. It is a non-return type that allows for confirmation after activation. (Once sensing is activated / cannot be reactivated. The activated area can be deleted and reconnected.)

• Sensors
• Safety Sensors
• Other safety equipment

1. The abnormal temperature of the power circuit's wires can be monitored and detected on a daily basis. 2. The abnormal heat generation (abnormal temperature) of control devices, load devices, and storage batteries can be monitored and detected on a daily basis. 3. The inspection of electrical circuits can be performed by anyone. Additionally, maintenance management can be carried out reliably and safely. 4. It is possible to prevent fires caused by abnormal temperatures in electrical equipment that could lead to recalls. 5. Safety management for electric vehicles (EVs) is enhanced, allowing for safe driving of electric vehicles (EVs). 6. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between two wires, abnormal temperatures (maximum allowable temperature) can be detected and signaled. [Set temperature 70°C] 7. This is an eco-technology product that is simple, easy, accurate, and has a switching function that results in zero standby power. 8. It can detect temperature and signal simultaneously, with a simple circuit configuration (switching function) at a low cost. 9. Shape memory alloys have permanent memory, are rust-free, and maintain their state once activated indefinitely. 10. Operation is a physical action that does not require power, has no malfunction, and can be used for many years with speed and accuracy. 11. Temperature detection can be performed directly without the need for measuring instruments. 12. It is a non-reset type that allows for confirmation after operation. (Once activated by detection / cannot be reset. Delete the activated area and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

■Features of Temperature Detection Sensors for Power Generation 1. Monitors and detects abnormal temperatures in the power supply circuit's wiring on a daily basis. 2. Monitors and detects abnormal heating (abnormal temperatures) in control devices, load devices, and storage batteries on a daily basis. 3. Inspection tasks for electrical circuits can be performed by anyone, ensuring reliable and safe maintenance management. 4. Monitors abnormal temperatures in the electrical equipment of solar power generation systems on a daily basis, preventing equipment damage and fire, thus ensuring safe power supply. 5. Utilizes shape memory alloy (restoration) and wiring (softening) to detect abnormal temperatures (maximum allowable temperature) by short-circuiting (contacting) the two-wire core, generating a signal. [Set temperature 70°C] 6. A simple, easy-to-use, and highly accurate eco-technology product with zero standby power due to its switching function. 7. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 8. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 9. Operates through a physical action that requires no power supply, ensuring no malfunction and allowing for swift, accurate use over many years. 10. Enables direct temperature detection without the need for measuring instruments. 11. Non-return type allows for confirmation after activation. (Once sensing is activated / cannot be reactivated. Delete the activated location and change the connection.)

• Sensors
• Safety Sensors
• Other safety equipment

■Features of Portable Fire Alarm 1. Can be easily installed in areas of the home where there is a risk of fire or arson. 2. By installing it closer to the potential fire outbreak location, it can detect abnormal temperatures associated with fire at an early stage. 3. This product combines a temperature memory sensor with a security alarm. The set temperature is 80°C. 4. It is an eco-friendly product with zero standby power that combines emergency alarms and abnormal temperature alarms. 5. Extremely compact and lightweight for easy portability. It is also very easy to handle. 6. Can be freely carried and installed, allowing for relocation to various places. 【Reference】: Attach commercially available magnetic stickers to the back of the portable fire alarm for very convenient installation. ■Features of Abnormal Memory Sensor 1. The abnormal memory sensor uses eco-technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Activation is a physical action that does not require power, ensuring no false activations and allowing for precise and swift use over many years. 4. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted or replaced.) 5. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations.

• Other safety equipment
• Safety Sensors
• Safety switch

■Features of the Buddhist Altar Alarm 1. Can be installed on a Buddhist altar or a Shinto shrine to monitor abnormal temperatures. 2. Easy to install on a Buddhist altar or a Shinto shrine (can be hung or placed). 3. A product that combines a security alarm with a temperature memory sensor. The set temperature is 80°C. 4. An eco-friendly product with zero standby power that combines emergency alarms and abnormal temperature alarms. 5. Extremely compact and lightweight for convenient installation. Additionally, it is very easy to handle. 6. In the event of a fire, even if the case material of the Buddhist altar alarm deforms (melts), it will emit an alarm sound for about one minute. 7. A product that meets the performance of a fixed temperature detector type 1 (120 seconds) as specified by fire safety regulations. ■Features of the Temperature Memory Sensor 1. The temperature memory sensor uses eco-technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Activation is a physical action that does not require power, ensuring no false activations and allowing for swift, precise use over many years. 4. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated. The activated part can be deleted and reconnected).

• Safety Sensors
• Other safety equipment
• Safety switch

■Features of the Buddhist Altar Alarm Device 1. This is an eco-friendly product with zero standby power that connects a wired temperature memory sensor to the alarm circuit. The detection temperature is 80°C. 2. This product combines a wired temperature memory sensor with a security alarm device. 3. It can detect abnormal temperatures from the Buddhist altar early, preventing fires before they occur. 4. It can be easily installed (hung or placed) on a Buddhist altar or a kamidana (Shinto altar). 5. It is extremely compact and lightweight, making installation convenient. Additionally, it is very easy to handle. 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of the Temperature Memory Sensor 1. The temperature memory sensor is a product that utilizes soluble insulated wire (softening) and shape memory alloy (restoration). 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. It operates physically without the need for a power source, ensuring no false activations and allowing for swift and accurate use over many years. 4. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated area can be deleted and reconnected.)

• Other safety equipment
• Safety Sensors
• Safety switch

[PR Text] ■Features of the Travel Portable Alarm 1. Carrying a travel portable alarm allows for safe and secure travel. 2. It can be used for security alarms at travel destinations, emergency alarms for health issues, and abnormal temperature alarms related to fires at accommodations. 3. It provides security measures for travel. 4. This product combines a security alarm with a temperature memory sensor, set at a temperature of 80°C. 5. It is an eco-friendly product with zero standby power, equipped with security alarms, emergency alarms, and abnormal temperature alarms. 6. Extremely compact and lightweight for convenient portability, and very easy to handle. 7. It can be freely carried, installed (hung, placed, or carried), and used according to various applications. 8. This product meets the performance standards of fixed temperature detectors type 1 (120 seconds) as specified by fire safety regulations. ■Features of the Temperature Memory Sensor 1. The temperature memory sensor utilizes eco-friendly technology with zero standby power through a switching function. 2. The shape memory alloy has permanent memory, is rust-free, and retains its shape once activated. 3. Activation requires no power source and operates physically, ensuring no false activations and allowing for precise and swift use over many years. 4. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated area must be removed and reconnected).

• Other safety equipment
• Safety Sensors
• Safety switch

■Features of the Portable Care Alarm Device 1. It can be attached to the body, bed, or chair, providing a convenient call alarm for caregiving, ensuring safety and peace of mind. 2. It can issue alarms for calls indoors, health issues, and emergencies such as abnormal temperatures associated with fires. 3. It can issue alarms for calls, security, self-defense, and emergencies during rehabilitation or walking. 4. This product combines a fire memory sensor with a call button for security alarms, set at a temperature of 80°C. 5. It is a compact, portable eco-friendly product with zero standby power, incorporating security, emergency, fire, and call functions. 6. It is extremely compact and lightweight, making it convenient to carry, and very easy to operate. 7. It can be freely carried or installed (hung, placed, or carried), allowing for use according to various needs. 8. It meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations, with a detection temperature of 80°C. ■Features of the Fire Memory Sensor 1. The fire memory sensor utilizes switching technology for zero standby power, making it eco-friendly. 2. The shape memory alloy has permanent memory and is rust-free, maintaining its state once activated. 3. Activation requires no power and operates physically, ensuring no false activations while being fast, precise, and usable for many years.

• Safety Sensors
• Other safety equipment
• Safety switch

■Features of Fire Detection Wire Alarm 1. It can provide abnormal temperature alarms associated with fires in multiple locations using fire detection wires. 2. It can provide abnormal temperature alarms associated with fires in multiple locations such as "the attic and indoors" or "under the floor and indoors." 3. Fire detection wires can be inserted into gaps between walls, furniture, and electrical appliances to provide abnormal temperature alarms associated with fires. 4. This eco-friendly product can provide abnormal temperature alarms associated with fires with zero standby power using fire detection wires. 5. It is easy to install and move, allowing anyone to set it up. 6. It is a product that integrates multiple shape memory alloys at equal intervals along an extended wire. 7. It utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature sensing and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. It can directly sense temperature and signal through physical operation without the need for power sources or measuring devices. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. It can be wired similarly to electrical equipment wiring. 12. It is a product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Other safety equipment
• Safety Sensors
• Safety switch

■Features of Residential Arson Detectors 1. Can detect arson in residential areas at an early stage. 2. Easily installed outdoors, in garages, storage sheds, or waste disposal areas of buildings prone to arson. 3. By extending the arson detection wire, a wide area of arson alert can be created. 4. An eco-friendly product that can detect and alert for fires caused by arson with zero standby power. 5. Can continuously monitor for fires caused by arson in residential areas. Reliable, safe, and secure. 6. A product that integrates numerous shape memory alloys at equal intervals along the extended wire. 7. Utilizes the softening of the wire and the recovery of the shape memory alloy to short-circuit between the two wires for temperature detection and signaling. 8. The shape memory alloy has permanent memory, is rust-free, and can be used for many years once activated. 9. Direct temperature detection and signaling through physical operation without the need for power sources or measuring devices. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to detect temperature and signal. 11. Can be wired similarly to electrical equipment wiring, suitable for both indoor and outdoor use. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety Sensors
• Other safety equipment
• Safety switch

■Features of Plug-Type Fire Alarm 1. Abnormal temperatures associated with residential fires can be detected early by the plug sensor (set temperature 80°C). 2. Detection and alarm for abnormal temperatures associated with fires can be done closer to the fire's origin. 3. Abnormal temperatures associated with fires can be detected early, helping to prevent fires before they occur. 4. Can be used and installed under similar environmental conditions as residential outlets (design and construction). 5. Installation or replacement of the plug sensor can be easily done by plugging it into the jack with a single touch. 6. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. ■Features of Temperature Memory Sensor 1. A shape memory alloy is combined and integrated with a wire, utilizing the softening of the wire and the recovery of the shape memory alloy to create a short circuit (contact) between the two wires, thereby sensing temperature and generating a signal. The set temperature is 80°C. 2. It is simple, easy, and accurate, employing eco-technology with zero standby power through its switching function. 3. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated. 4. Operation is based on a physical mechanism that requires no power supply, ensuring no false activation, and it can be used accurately and swiftly for many years.

• Other safety equipment
• Safety Sensors
• Safety switch

■Features of the Plug-Type Fire Alarm for Care Facilities 1. It can early detect abnormal temperatures associated with fires in care rooms using plug sensors or plug sensing wires (set temperature 80°C). 2. It can detect and alarm for abnormal temperatures associated with fires closer to the location of the fire. 3. It can early detect abnormal temperatures associated with fires, helping to prevent fires before they occur. 4. It can issue alarms for abnormal temperatures associated with fires and emergency situations. 5. It can be used and installed under similar environmental conditions as residential outlets (design and construction). 6. The installation or replacement of plug sensors and plug sensing wires can be easily done by plugging into a jack with a single touch. 7. It is a product that meets the performance standards of fixed temperature type sensors as specified by fire safety regulations (120 seconds). ■Features of the Temperature Memory Sensor 1. It combines and integrates shape memory alloy with electric wires, using the softening of the wire and the recovery of the shape memory alloy to create a short circuit (contact) between the two wire cores to sense temperature and generate a signal. The set temperature is 80°C. 2. It is simple, easy, and has good accuracy, utilizing eco-technology with zero standby power through a switching function. 3. It is non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated. The activated location can be deleted and reconnected).

• Safety Sensors
• Other safety equipment
• Safety switch

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas at risk of dangerous temperatures to monitor and alarm for dangerous temperatures, with the ability to relay signals. 3. Allows for continuous daily monitoring of various dangerous temperatures in each industry, enabling early detection and safe response. 4. An eco-friendly "dangerous temperature alarm device" that anyone can easily install, with zero standby power. 5. A new type of "dangerous temperature alarm device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical operation without the need for a power source or measuring equipment. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical wiring. It can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and retains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Safety Sensors
• Sensors
• Sensors

■Features of the Battery Alarm System 1. A temperature sensing wire (70°C) is installed on the outer wall of the battery or the power line, enabling monitoring and alarm for abnormal temperatures. 2. The system continuously monitors the battery's abnormal temperature, allowing for early detection and safe response. 3. Inspection and maintenance of the battery equipment can be carried out reliably and safely. 4. This is an optimal "Battery Alarm System" for safety measures against abnormal temperatures in batteries. 5. It is a "Battery Alarm System" that combines a compact alarm panel with a temperature sensing wire (70°C). 6. This product meets the performance standards of a fixed temperature type detector (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power or measuring instruments. 2. When the surrounding temperature reaches the set temperature (70°C), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor installations. 4. The product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy to use, and highly accurate, featuring eco-technology with zero standby power due to its switching function. 6. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated location must be removed and reconnected).

• Power storage device
• Solar power generator
• Lithium-ion battery

■Features of the Battery Abnormal Temperature Alarm 1. Capable of detecting abnormal temperature alarms for each battery. 2. An eco-technology that can detect and alarm abnormal temperatures of each battery with zero standby power. 3. Allows for regular collective monitoring of abnormal heat (abnormal temperature) for each battery. 4. Inspection tasks for battery equipment can be performed by anyone, ensuring reliable and safe maintenance management. 5. Detects abnormal temperatures of each battery and alerts through an alarm system to prevent equipment damage and fire. 6. A product that integrates numerous shape memory alloys at equal intervals along extended wires. 7. Utilizes the softening of wires and the restoration of shape memory alloys to short-circuit between two wires for temperature sensing and signaling. 8. Shape memory alloys have permanent memory, are rust-free, and can be used for many years once activated. 9. Enables direct temperature sensing and signaling through physical operation without the need for power sources or measuring instruments. 10. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and signal. 11. Can be wired similarly to electrical equipment wires, suitable for both indoor and outdoor wiring. 12. A product that meets the performance standards of type 1 fixed temperature detectors as specified by fire safety regulations. 13. Non-resettable, allowing for confirmation after activation (once activated, it cannot be reactivated; the activated location can be deleted and reconnected).

• Power storage device
• Solar power generator
• Lithium-ion battery

■Features of Temperature Detection Sensors for Storage Batteries 1. It can monitor and detect abnormal heat generation (abnormal temperature) of storage batteries on a daily basis. 2. It can monitor and detect abnormal temperatures of the wiring and electrical equipment in the charging/discharging circuits of storage battery systems on a daily basis. 3. Inspection tasks for storage battery systems can be performed by anyone, ensuring reliable and safe maintenance management. 4. By utilizing shape memory alloys (restoration) and wires (softening) to create a short circuit (contact) between the two wires, it detects abnormal temperatures (maximum allowable temperature) and generates a signal. [Set temperature 70°C] 5. It is a simple, easy-to-use, and accurate eco-technology product with zero standby power due to its switching function. 6. It can simultaneously detect temperature and generate signals, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloys have permanent memory, are rust-free, and maintain their state indefinitely once activated. 8. The operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Direct temperature detection is possible without the need for measuring instruments. 10. It is a non-resettable type that allows for confirmation after activation. (Once sensing is activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Fuel Cells
• Solar power generator
• Lithium-ion battery

■Features of the Distribution Board Alarm Device 1. Temperature sensing wire (80℃) is wired to the distribution/control panel equipment, allowing for monitoring and alarming of abnormal temperatures. 2. Abnormal temperatures in the distribution/control panel equipment are monitored continuously on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be performed reliably and safely. 4. This is an optimal "distribution board alarm device" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "distribution board alarm device" that combines a compact alarm panel with a temperature sensing wire (80℃). 6. This product meets the performance standards of a fixed temperature type detector (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80℃), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy, and accurate, utilizing eco-technology with zero standby power through its switching function.

• Distribution Board
• Control Panel
• power supply

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Distribution Board
• Control Panel
• power supply

■Features of Temperature Sensing Wires for Electric Cables 1. Attach the temperature sensing wire for electric cables to the electric wire using a spiral tube or similar method to monitor abnormal temperatures in the wire. 2. Attach the temperature sensing wire for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in electric equipment's wires, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Safety management of electric equipment can be performed even by those who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Wiring similar to that of electric equipment can be performed. Additionally, it can be used for both indoor and outdoor wiring.

• Distribution Board
• Control Panel
• power supply

■Features of the Abnormal Temperature Monitoring Panel 1. Enables safe unmanned operation of industrial machinery and equipment in factories. 2. Detects abnormal temperatures in industrial equipment, cuts off the power circuit, and prevents equipment damage and fires in advance. 3. Allows for continuous daily monitoring of abnormal temperatures in factory industrial equipment, ensuring reliable and safe maintenance management. 4. Can cut off the power circuit at abnormal temperatures regardless of the main power capacity (load capacity). 5. An eco-friendly abnormal temperature monitoring panel with zero standby power. The electrical circuit configuration is simple and cost-effective. 6. Can be installed in factory industrial machinery and equipment, serving as safety management equipment during ISO updates. ■Features of the Temperature Detection Sensor 1. Combines and integrates shape memory alloy with electrical wires, using the softening of the wire and the restoration of the shape memory alloy to detect temperature by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is the maximum allowable temperature of the wire (60°C, 75°C). 2. Simple, easy, and accurate, with a switching function that utilizes eco-friendly technology with zero standby power. 3. The shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 4. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, precise use over many years. 5. Non-resettable, allowing for confirmation after activation.

• Safety Sensors
• Other safety equipment
• Circuit breakers and switches

■Features of the Abnormal Temperature Control Device 1. It can detect abnormal temperatures in industrial machinery, cut off the power circuit, and prevent equipment damage and fires in advance. 2. It allows for constant monitoring of abnormal temperatures in industrial machinery, ensuring reliable and safe maintenance management. 3. The power circuit can be cut off due to abnormal temperatures regardless of the main power capacity. 4. It enables safe unmanned operation of industrial machinery in factories. 5. It can be installed in industrial machinery in factories, serving as safety management equipment during ISO updates. 6. It is an eco-friendly abnormal temperature control device with zero standby power. ■Features of the Temperature Sensing Wire 1. It utilizes extended wires (softening) and numerous shape memory alloys (restoration) to detect abnormal temperatures by short-circuiting (contacting) the two wire cores, generating a signal. The set temperature is 80°C. 2. It is a simple, easy-to-use product with good accuracy, featuring a switching function for zero standby power. 3. The shape memory alloy has permanent memory, is rust-free, and retains its shape indefinitely once activated. 4. The operation is a physical action that does not require power, ensuring no malfunction and allowing for swift, accurate use over many years. 5. It is a non-resettable type that allows for confirmation after activation (once activated, it cannot be reactivated; the activated point must be deleted and reconnected). 6. It is a product that meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations.

• Safety Sensors
• Other safety equipment
• Circuit breakers and switches

■Features of the Abnormal Temperature Alarm 1. Can be installed on household appliances and industrial equipment in factories to provide an abnormal temperature (80°C) alarm. 2. Enables early detection of abnormal temperatures, preventing equipment damage and fires. 3. Allows for regular monitoring of abnormal temperatures, ensuring reliable and safe maintenance management. 4. Can be easily installed on household appliances, industrial equipment, and appliances that may be subject to recall. 5. The abnormal temperature alarm is an eco-friendly technology product with zero standby power due to its switching function. 6. The temperature memory sensor directly detects temperature and signals through physical operation without the need for power or measuring devices. 7. The temperature memory sensor is a product that integrates shape memory alloy into a coil shape with electrical wires. 8. The temperature memory sensor detects temperature by short-circuiting the two wires (softening) and shape memory alloy (restoration) to generate a signal. 9. This product meets the performance standards of type 1 fixed temperature detectors (120 seconds) as specified by fire safety regulations. 10. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Other safety equipment
• Safety Sensors
• Safety switch