シュマルツ List of Products and Services

The display glass gripper 'STGG' reduces the load on thin and delicate workpieces by performing suction with low vacuum pressure and on a surface level, enabling more dynamic transport. We also offer types that comply with clean room standards and are suitable for ESD (electrostatic discharge) measures. 【Features】 ■ Gripper with low vacuum pressure and high suction capacity using a porous plate ■ Surface suction reduces localized stress on workpieces, preventing wrinkles and deformation in thin materials ■ Prevents contamination and suction marks ■ Integrated vacuum generator allows for use with only compressed air supply ■ A variety of accessories are available, including exhaust air connectors and non-contact pads, ideal for use in clean rooms *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment

"NBR-ESD" is a vacuum pad suitable for the suction transport of PCBs and electronic components, designed for electrostatic discharge (ESD) countermeasures. It uses rubber with the necessary electrical resistance values for ESD protection and achieves gentle discharge when combined with conductive products. It is available in various shapes and sizes, including flat, bellows, and oval. 【Features】 ■ Electrostatic dissipative material with electrical resistance values required for ESD (1.0x10^5Ω to 1.0x10^9Ω) ■ Prevents damage to electronic components and PCBs from unexpected electrostatic discharges ■ Allows for rapid discharge of products with static electricity ■ A wide range of designs and sizes, including flat, bellows, and oval shapes *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment

The electrolyte injected into the cells during the production of secondary batteries corrodes the vacuum pads used when opening the cells. By using electrolyte-resistant rubber as the material for the vacuum pads, we can suppress the degradation of the vacuum pads and contribute to reducing replacement costs. The electrolyte-resistant rubber pads are available in three different shapes. Among the flat shapes, you can choose a pad with a large sealing lip suitable for thin workpieces like films, or select from 1.5-stage and 2.5-stage bellows pads that are effective for buffering during adhesion and stroke adjustment, depending on the application. 【Features】 - Uses materials resistant to electrolytes, contributing to the long lifespan of vacuum pads. - Offers three shapes: flat, 1.5-stage bellows, and 2.5-stage bellows, allowing for the selection of a more suitable pad.

• Vacuum Equipment
• Secondary Cells/Batteries

The FLGR gripper for electrode materials is suitable for transporting separators and electrode materials in secondary batteries (lithium-ion batteries). It features a structure that integrates a low vacuum pressure and high suction volume vacuum generator with a porous plate, allowing for gentle suction across the entire workpiece, thereby reducing the load on the workpiece and minimizing deformation and wrinkles. The porous plate material can be selected from low-dust PEEK and POM-AS, which is effective for ESD (electrostatic discharge) measures, and can be provided in any desired size. The exhaust port, which allows for discharge outside the working environment, can be oriented in either a vertical or horizontal direction for easy handling. 【Features】 ■ Surface suction via the porous plate reduces localized loads on the workpiece and minimizes deformation of thin workpieces. ■ Reduces contamination and suction marks. ■ Integrated vacuum generator allows for use with only compressed air supply. ■ High suction volume is effective for dust collection and exhaust. ■ Capable of exhaust outside the working environment, making it suitable for use in clean rooms. ■ A variety of accessories are available, including non-contact pads suitable for preventing double picks and bellows vacuum pads that act as buffers.

• Vacuum Equipment

The VS-3C series vacuum switch is a switch that can display in three colors: red, green, and orange. It allows for the adjustment of response time, enabling the detection of instantaneous pressure fluctuations as abnormal values and preventing malfunctions. The switch body also has a button, making it easy to set display, operation, hysteresis, zero point, and other parameters. We also offer a lineup of mounting frames and brackets. For more details, please contact us or refer to the catalog.

• Vacuum Equipment

Schmalz Co., Ltd. is launching an unprecedented new service that not only provides vacuum equipment but also takes on the design, development, and installation of vacuum conveying systems as a whole. Dedicated engineers will visit the site to design and develop the optimal conveying system. The system, which condenses Schmalz's vacuum conveying know-how and unique technology, will enhance conveying efficiency and contribute to reducing running costs through energy savings. *When making inquiries, it would be helpful if you could fill out and send the "Inquiry Sheet" included with the catalog for a smoother response.

• Other conveying machines

The FXP/FMP series universal vacuum grippers are large robotic hands that use sponge or suction pads on the gripping surface. They are very effective for handling workpieces with gaps that are difficult to grip with vacuum pads, workpieces that are not positioned accurately, and for bulk transport of various sizes of workpieces. They are used mounted on industrial robots such as press transfer robots and palletizing robots. The configuration of the vacuum gripper allows for the selection of optimal specifications according to individual applications, including the presence or absence of a vacuum generator, the type of gripping surface, gripper size, and valve type.

• Vacuum Equipment

The "Non-contact Vacuum Pad SBS" is a new type of transport equipment suitable for transporting printed circuit boards, glass substrates, plywood, silicon mold solar cells, and LCD substrates, as well as preventing double handling of paper bags and other packaging materials. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

This is a vacuum pad developed for the purpose of suction transport of plate glass. The grooves on the suction surface allow for strong adhesion even when powders or cleaning liquids that prevent close contact during stacking are present.

• Vacuum Equipment
• Other processing machines

The Schmalz Flow Gripper SCG is a vacuum gripper that integrates a high-suction vacuum generator. It can operate solely on compressed air. The suction surface features POM porous plates suitable for highly breathable materials such as fiber-reinforced composites, textiles, and foams, as well as for uneven workpieces like printed circuit boards.

• Vacuum Equipment

The adjacent joint SVS-STV and SVS-GE series are accessories suitable for mounting applications that involve clamping holders and plates. They come in two types: one with a quick-connect hose connector on top (SVS-STV) and another with threaded connections (SVS-GE), making it easy to attach hoses, ejectors, and devices. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines
• joint

The spring plunger is an accessory for vacuum pads used for height adjustment during suction and to mitigate impacts. The FSTA-HD series features a spring-loaded spring plunger that has springs both above and below the mounting position, allowing for adjustments when there are height restrictions during work elevation or when the mounting frame may bend due to high loads. Additionally, the rod of the main body is made of stainless steel, providing high durability and a long lifespan. There are three sizes available for stroke lengths ranging from 25mm to 90mm. (Note: Not all strokes can be utilized to prevent load and damage caused by contact between springs.) A type with a rotation prevention feature suitable for use with oval pads is also available (FSTA-HD-VG). For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines
• Other machine elements

The Compact Ejector series 'SCPSb/c/i' responds to high-speed application suction transport with its high-efficiency nozzle and fast valve switching. Equipped with a vacuum release function, it allows for quick release of the workpiece. Additionally, its filterless structure eliminates the need for filter replacement. Furthermore, the eco-nozzle technology achieves high suction volume while minimizing compressed air consumption. The 'SCPSc/SCPSi' series features a standard air-saving function that stops suction after workpiece adhesion and resumes suction when the vacuum pressure drops to a set level, enabling energy-saving operation. 【Features】 ○ Vacuum release function ○ Increased productivity ○ Easy maintenance ○ Energy-saving operation For more details, please contact us or download the catalog.

• Vacuum Equipment

This is a suction pad made of Elastodur, which has flexibility and approximately three times the wear resistance of nitrile rubber. It also has resistance to ozone and alcohol, ensuring a long lifespan. The large sealing lip has a bell shape that conforms to the curved surfaces of metal products, allowing for effective suction. 【Features】 ○ Design: - Bell shape that accommodates the curves of the workpiece - Grooves on the suction surface, suitable for thin steel plates with an oil film - Includes a brake foot to suppress deformation of thin workpieces - Modular structure that allows for recycling of non-worn parts ○ Material: - Made of Elastodur, which has flexibility and approximately three times the wear resistance of nitrile rubber For more details, please contact us or download the catalog.

• Vacuum Equipment

Our company, which handles vacuum equipment for automatic transport and clamping, offers various transport methods that contribute to improving productivity and reducing costs in the manufacturing industry. You can choose the optimal method according to the target object. 【Product Lineup】 ■ Compact Ejector "SCPS/SCPSi" A palm-sized ejector capable of energy-saving operation and high-speed suction. ■ Magnetic Gripper "SGM Series" A gripper with built-in permanent magnets, ideal for workpieces with holes or gaps where vacuum suction cannot be used. ■ Needle Gripper "SNG" A gripper that can transport highly breathable fibrous workpieces by extending and retracting built-in needles. ■ Vacuum Pad for Thin Steel Plates "SAXM" For high-speed transport of thin steel plates with an oil film! A suction pad made of Elastodur, featuring flexibility and wear resistance. *For more details, please download the catalog or contact us.

• Vacuum Equipment

The Multi-Stage Ejector SEM-C series is a vacuum ejector equipped with high suction capability. It has a built-in multi-stage nozzle, allowing for a large suction volume and a pressure increase of up to -80 kPa. It is suitable for applications involving breathable workpieces, such as the transport of packaging machinery related to cardboard and the adhesion of wood. Additionally, its high suction volume is effective in reducing cycle times.

• Other packaging machines
• Vacuum Equipment
• Wood processing machinery

The Schmalz VEE series end effectors (robot hands) are modular robot hands that allow for the free combination of types, quantities, and arrangements of suction pads. You can select suction pads suitable for the materials and sizes of the products to be suctioned, such as pouch bags, foil, and cardboard boxes, and construct the hand accordingly. Since the individual parts are already completed, no additional machining is required for the assembly of the hand. This enables easy and rapid assembly, reducing startup time and manufacturing costs. Considering the burden on the robot, the hand is lightweight and compact, making it suitable for high-speed handling applications. A variety of robot flanges that are convenient for attachment to the robot are also available in the lineup. The base components are made from materials that comply with FDA (U.S. Food and Drug Administration) standards, making them suitable for food handling.

• Transport and handling robots

This is a vacuum pad suitable for removal from injection molding machines. Schmalz has developed a markless rubber that does not contain silicone, a paint-inhibiting substance. It minimizes the occurrence of adhesion marks that can be problematic during painting, as it leaves fewer suction traces. It also has excellent temperature resistance, allowing it to hold workpieces at temperatures up to 140°C for extended periods.

• Plastic Mould
• Injection Molding Machine
• Vacuum Equipment

Features: The check valves of the SVK, SVKG, and SVV series are drop prevention valves that block the circuit during suction by having a built-in ball that moves up and down, thereby suppressing the decrease in vacuum pressure within the main circuit. By attaching them to vacuum pads, they can maintain vacuum pressure even when the pad is not fully covering the workpiece, allowing for effective adhesion and transport.

• Vacuum Equipment
• Other conveying machines
• valve

The SAF series vacuum pads for thin steel plates are flat vacuum pads that are optimal for the suction and transport of thin steel plates with an oil film. The suction surface of the pads, made from highly oil-resistant nitrile rubber, features grooves to release oil, allowing for strong suction on workpieces with oil films and enabling rapid transport. The pads are available in sizes ranging from a minimum of Φ30mm to a maximum of Φ125mm. You can choose the appropriate pad for your workpiece from three materials: general-purpose nitrile rubber (NBR-60), slightly softer nitrile rubber (NBR-45), and a special markless rubber (HT2/Φ30mm to Φ60mm) that excels in high-temperature resistance suitable for hot forging.

• Vacuum Equipment
• Vehicle body parts
• Other conveying machines

The SAB series vacuum pads for thin steel plates are optimal 1.5-stage bellows vacuum pads for the suction and transport of thin steel plates with an oil film. The pads, made from highly oil-resistant nitrile rubber, feature grooves on the suction surface to allow oil to escape, enabling strong suction on workpieces with an oil film and facilitating rapid transport. The pads are available in sizes ranging from a minimum of Φ22mm to a maximum of Φ125mm. You can choose the appropriate pad for your workpiece from three materials: general-purpose nitrile rubber (NBR-60), markless rubber that leaves minimal suction marks (HT1), and high-temperature durable rubber that is both markless and excellent in high-temperature resistance (HT2/Φ22mm to Φ80mm).

• Vacuum Equipment
• Vehicle body parts
• Other conveying machines

The SAOF series vacuum pads for thin steel plates are flat oval vacuum pads that are optimal for the suction and transport of thin steel plates with an oil film. The pads, made of highly oil-resistant nitrile rubber, feature grooves on the suction surface to release oil, allowing for strong suction on workpieces with an oil film and enabling quick transport. The pads are available in a minimum size of 16x50mm and a maximum size of 70x140mm. You can choose the appropriate pad for your workpiece from three materials: general-purpose nitrile rubber (NBR-60), slightly softer nitrile rubber (NBR-45), and a special markless rubber (HT2) that excels in high-temperature resistance suitable for hot forging, available in sizes from 23x60mm to 50x100mm.

• Vacuum Equipment
• Vehicle body parts
• Other conveying machines

The SAOB series vacuum pads for thin steel plates are optimal 1.5-stage bellows oval vacuum pads for the suction and transport of thin steel plates with an oil film. The pads, made of highly oil-resistant nitrile rubber, have grooves on the suction surface to release oil, allowing for strong suction on workpieces with an oil film and enabling rapid transport. The pads are available in sizes ranging from a minimum of 30x60mm to a maximum of 70x140mm. You can choose a suitable pad for your workpiece from general-purpose nitrile rubber (NBR-60), markless rubber that leaves minimal suction marks (HT1), and high-temperature resistant rubber that is both markless and excellent in high-temperature durability (HT2/30x60mm, 40x80mm).

• Vacuum Equipment
• Vehicle body parts
• Other conveying machines

The SAOG series vacuum pads for thin steel plates are bell-shaped oval vacuum pads that are ideal for the suction and transport of thin steel plates with an oil film. The pads, made of highly oil-resistant nitrile rubber, feature grooves on the suction surface to allow oil to escape, enabling strong suction on workpieces with an oil film and facilitating rapid transport. The curved suction surface makes it suitable for adhering to curved workpieces. To ensure compatibility with curved surfaces, a slightly softer nitrile rubber (NBR-45) is used as the material.

• Vacuum Equipment
• Vehicle body parts
• Other conveying machines

The Schmalz magnetic gripper 'SGM' series is equipped with permanent magnets, making it suitable for transporting thin steel plates with holes and complex-shaped parts. Additionally, since air consumption occurs only during function switching, it allows for energy-efficient transport compared to the use of electromagnets or vacuum pads. In addition to the standard type SGM, there are enhanced holding force types (SGM-HP), high holding force and high-temperature resistant types (SGM-HT-HP), and a variety of options including high holding force and anti-double-picking types (SGM-HPm) available in the lineup. *For more details, please refer to the catalog or feel free to contact us.

• Pneumatic Equipment
• Transport and handling robots
• Vacuum Equipment

The SABT-C series vacuum pad is a modular type 1.5-stage bellows suction pad. The uniquely developed brake foot (orange part in the photo), cup (blue part in the photo), and fittings can be easily assembled, replaced, and separated, and the screws can be reused. The grooves inside the pad serve as escape routes for oil, allowing it to strongly adhere even to thin steel plates with an oil film. Additionally, the brake foot increases the surface area of the pad that contacts the workpiece, preventing thin workpieces from being pulled in and suppressing deformation during suction. Furthermore, due to the small internal volume of the pad, rapid vacuum attainment is possible. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Vehicle body parts
• Steel

It is a gripper that transports objects by extending and retracting the built-in needle. It is suitable for cases where vacuum suction transport is difficult, such as with highly breathable products.

• Pneumatic Equipment

Schmalz Co., Ltd., a manufacturer specializing in vacuum equipment based in Tsuzuki Ward, Yokohama City, has developed the high-precision suction block ISBL-T series as part of its lineup of vacuum suction blocks for NC routers. Schmalz manufactures vacuum suction blocks for processing machines in addition to vacuum equipment for automatic transport. The vacuum suction blocks support the production of processed products by holding and fixing materials, such as wooden boards, from the bottom surface before processing. Because of the retention from the bottom surface, it is possible to process not only the surface of the material but also the sides. The vacuum clamping system IS series allows for the introduction of suction blocks by placing Schmalz-made steel plates on various tables, such as machine tables, grid tables, and flat tables. They can be arranged freely according to the workpiece, eliminating the need for jigs that were previously made for each processed item. The ISBL-T series features vacuum suction blocks with a height accuracy of ±0.06mm, enabling high-precision processing that was not achievable with the previous lineup (height accuracy ±0.15mm), thereby expanding the range of applications. Additionally, mechanical clamps are also available instead of suction retention.

• Air Tools

Schmalz Co., Ltd., a manufacturer specializing in vacuum equipment based in Tsuzuki Ward, Yokohama City, has developed the "Multi-Clamp System VC-M Series," which is ideal for securing materials during wood processing. The Multi-Clamp System VC-M is a suction device that fixes materials using vacuum air during various wood processing tasks such as cutting, sanding, and screw installation. It can be used either as a standalone suction plate or in combination with a base. The suction plate is equipped with a built-in vacuum generator, allowing for easy use by simply connecting compressed air to fix both sides. The suction range can be adjusted to various shapes and sizes by placing a sealing cord in the grooves of the plate. By arranging multiple suction plates, it can also accommodate longer workpieces. There are also types of suction plates that do not have a built-in vacuum generator, and for situations where there is no air source nearby, a compact vacuum pump that can be used with AC100V is available. Additionally, by attaching the suction plate to an optional base, the angle can be adjusted, making it ideal for processing areas other than the surface of the workpiece.

• Air Tools

The HT2 series vacuum pads are suction pads made from high-temperature resistant rubber. They were developed as pads for transporting thin steel sheets at high temperatures in processes such as hot forming and hot forging. They can adhere to workpieces at 350°C for short periods and 200°C for longer periods. In addition to being able to replace mechanical clamps, they are made from a markless material that helps prevent suction marks from appearing after painting. The HT2 pads are designed in the same shape as our SA series, which is suitable for transporting thin steel sheets. The unique design of the suction surface in the SA series prevents deformation of the workpieces and allows for high-speed transport, resulting in many successful applications.

• Forging Machine

The wafer gripper SWGm is a vacuum gripper specialized for transporting solar cell wafers and cells. The gripping surface of the gripper is sized to match 5 to 6-inch single-crystal and multi-crystal wafers and cells, preventing damage from localized loads during adhesion. Compared to Bernoulli-type grippers, it has less lateral displacement and can reduce air consumption. By connecting a hose to the main body of the gripper, the exhaust location can be set arbitrarily, preventing dust from being stirred up during adhesion transport, making it suitable for use in clean rooms. In the latest model SWGm, the position of the exhaust port can be selected from side or top types. In addition to standalone use of the gripper, it is also possible to add functions such as solenoid valves and cushioning pads according to the usage environment.

• Solar power generator

The SUF series suction pads are flat-type vacuum pads. They are ideal for transporting applications with a flat and basically smooth surface. They are available in a wide range of sizes from φ1mm to φ210mm. Larger sizes (φ125mm to φ210mm) come with a support plate. We offer various materials, including general-purpose nitrile rubber and silicone rubber, as well as markless rubber that reduces suction marks and ESD-safe rubber that prevents defects in electronic boards caused by electrostatic discharge. *For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Transport and handling robots
• Vacuum Equipment

This is a flat-type suction pad made of a special material called Barcoran (VU1), which excels in wear resistance and crack resistance. It has low wear (approximately 10-12 mm³) in accordance with DIN53516, boasting a long service life and helping to reduce replacement costs. It is suitable for transporting steel plates and cardboard. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The "SHFN" flat vacuum pad for wood materials features a soft lip made of natural rubber that easily conforms to slight unevenness, and it securely adheres to rough surfaces with its internal sealing edge. It is ideal for transporting wooden products such as furniture materials, flooring materials, particle boards, and MDF. You can add options such as a touch valve to reduce air consumption and a sponge ring that fits better to the workpiece, allowing you to select the optimal specifications. *For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Transport and handling robots

The Flat Vacuum Pad SPU series is a large suction pad with a flexible sealing lip. It can accommodate smooth and flat workpieces such as glass, as well as slightly rough workpieces like wood and thin steel plates. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The "Flat Vacuum Pad SPC160 to SPC250" is a special type with a double seal lip, making it ideal for flat and breathable workpieces such as MDF, cardboard, and various recycled materials. A cone is formed inside the pad due to compressed air, allowing for the extraction of thin workpieces one at a time. Additionally, its optimized shape provides high suction power even in small sizes, and it can utilize compact vacuum generators to shorten cycle times. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The Flat Vacuum Pad SPK series is an adsorption pad that combines nitrile rubber (NBR, Shore hardness 70°) for a strong grip on the workpiece and flexible foam rubber (EPDM, Shore hardness 15°) for compliance. It is ideal for uneven workpieces such as decorative glass and patterned steel plates, as well as rough-surfaced materials like natural stone. The pads can be selected to match a wide variety of shapes and sizes of workpieces, and thanks to their optimized design, they provide high suction power even in small sizes, allowing for the use of compact vacuum generators to shorten cycle times. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The SGP/SGPN series of vacuum pads for packaging machinery and paper is suitable for adhesion to materials such as paper and film. The soft sealing lip conforms to thin workpieces. The pad's suction surface is equipped with small protrusions (internal support) to prevent the workpiece from being drawn into the pad, making it particularly suitable for uniformly surfaced foils. The pads are available in a lineup of materials, including very soft natural rubber (NK), silicone rubber (SI) that can directly adhere to food, markless rubber (HT1) that reduces suction marks, and fluorine rubber (FPM) that is resistant to acids. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The flat vacuum pad "SGN/SG" is an ideal product for long, narrow shapes that are highly susceptible to deformation. It features a long, inclined, stretchable sealing lip that accommodates flat-surfaced workpieces. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The flat vacuum pads SGA and SGAN are products made from silicone rubber (SI) and polyurethane (PU), ideal for multi-shift operations with very short cycle times. Additionally, the soft and flexible sealing lip makes them suitable for handling workpieces that are sensitive to impact, such as CDs. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The SAFT-C series vacuum pad is a modular suction pad. The uniquely developed brake foot (orange part in the photo), cup (blue part in the photo), and fittings can be easily assembled, replaced, and separated, and the screws can be reused. The grooves inside the pad serve as escape routes for oil, allowing for strong adhesion even to thin steel plates with an oil film. Additionally, the brake foot increases the surface area of the pad that contacts the workpiece, preventing the pad from pulling in thin workpieces and reducing deformation during adhesion. Furthermore, the small internal volume of the pad allows for quick vacuum attainment. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The SAOK series vacuum pads for thin steel plates feature a unique design with a suction surface that is significantly curved in a "U" shape. They fit well on the edges and curved surfaces of workpieces. Additionally, the unevenness of the pad's suction surface helps maintain a strong grip, even on workpieces with oil contamination, reducing the risk of slipping. You can choose pads suitable for your workpieces from general-purpose nitrile rubber (NBR-60) and high-temperature durable rubber (HT2), which is mark-free and excellent in heat resistance.

• Vacuum Equipment
• Other conveying machines
• Other Auto Parts

The Flat Vacuum Pad SGON series is an oval-shaped flat vacuum pad. It is ideal for elongated and narrow workpieces such as rails and pipes, as well as workpieces with lateral burrs. The materials available include general-purpose nitrile rubber (NBR), silicone rubber (SI) suitable for direct food contact, markless rubber (HT1) that reduces marks left by suction, and ESD rubber (NBR-ESD) that prevents defects in electronic boards caused by electrostatic discharge. You can choose the most suitable pad for your workpiece from a total of 11 sizes, ranging from a minimum of 2mm x 4mm to a maximum of 30mm x 90mm. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The Flat Vacuum Pad SPLO series is an oval-shaped vacuum pad that is ideal for narrow and elongated workpieces. It is suitable for workpieces that require a longer and narrower suction area, with a minimum size of 60mm x 20mm and a maximum size of 370mm x 80mm. For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other conveying machines

The FSGA series bellows-type vacuum pads are 1.5-stage accordion-shaped suction pads. They are available in sizes ranging from Φ6mm to Φ78mm, allowing for selection tailored to various workpiece sizes. Additionally, due to the 1.5-stage bellows shape, they are effective for suctioning slightly curved workpieces. Materials available include general-purpose nitrile rubber (NBR), silicone rubber (SI) suitable for direct food contact, wear-resistant silicone rubber (SI-HD) ideal for high-wear applications, markless rubber (HT1) that reduces suction marks, ESD rubber (NBR-ESD) that prevents defects in electronic boards caused by electrostatic discharge, and soft natural rubber (NK).

• Vacuum Equipment