京都理化学器械 Product Lineup

It is possible to condition the collection tube used in the thermal desorption device.

• Other physicochemical equipment
• Other environmental analysis equipment
• Analytical Equipment and Devices

Oil-free mini compressor with built-in oxygen concentration sensor - Microcomputer control • LCD display The purity of nitrogen gas and operating time can be checked on the LCD display. If there is a purity anomaly or trouble with the compressor, the cause will be displayed on the LCD. * The compressor will stop in case of trouble. * If an alarm output for purity anomaly is required, please request it at the time of order. - Low noise and high lifespan design Equipped with a proven low-noise, high-lifespan oil-free compressor (1 to 4 units), it can be used in quiet indoor environments due to its highly soundproof structure. Compact and lightweight, it has a built-in water drain vaporization device, allowing for flexible installation locations.

• Gas Generator

Oil-free compressor built-in ultra-compact nitrogen gas generator - Built-in air pump with long lifespan and low noise By using the built-in compressor at 50% of its rated pressure, it achieves over 10,000 hours of durability, low power consumption, low noise, and low vibration. - Built-in solenoid valve miniaturized unit The solenoid valve has been miniaturized to the extreme at the manifold, improving maintainability. - Equipped with various sensors • LCD display Repairs can be addressed even in sudden troubles. With built-in oxygen concentration, flow, and current sensors, it constantly displays the operating status and shows an error message during abnormal conditions through a fail-safe function, ensuring a safe stop. Even in maintenance or sudden troubles, the advantages of ultra-compactness allow for return and repair support.

• Gas Generator

Oil-free mini compressor built-in nitrogen gas generation device - Easy maintenance without selecting installation location (internal structure is design registered) The compressor fixing screws for transportation have been eliminated, and electrical wiring and piping connections can be made from the back without opening the enclosure. Regular inspections and maintenance can be performed simply by opening the front door. - Long maintenance cycle Equipped with multiple reliable oil-free compressors from domestic manufacturers. Improved ventilation efficiency within the device suppresses temperature rise, significantly extending lifespan. During maintenance, users can easily replace components. - High performance and space-saving While maintaining the same performance as devices with the same output, the dimensions have been reduced by 34% in volume ratio, and the device noise has been suppressed to below 10 dB(A) based on actual measurements. *Comparison made with TNH4-19M5-2 and SLM-22L devices. Additionally, by changing the exhaust from the conventional rear exhaust to a concentrated upper exhaust, the ventilation space at the back has been eliminated, allowing for space-saving installation. *The direction of the exhaust can still be changed to the rear as before.

• Gas Generator

Microcontroller-Controlled Oil-Free Babycon Built-In Nitrogen Gas Generation System Achieves low cost with simplified functionality while maintaining the same performance as higher-end models. Necessary information can be displayed on the LCD panel. - Built-in Oil-Free Babycon Equipped with an oil-free Babycon using a domestic manufacturer's three-phase motor, enhancing reliability and durability. - Built-in Inverter, No Installation Location Restrictions The oil-free Babycon is controlled by an inverter, allowing it to operate with the same performance on both 50/60Hz power supplies. Single-phase 200V is also selectable, making it possible to install in general offices without three-phase power. - Economical with Long Maintenance Cycle The unit switching valve employs an air-operated valve, and the maintenance cycle for the PSA unit is 20,000 hours for long life. The compressor has a durability of 10,000 hours in continuous operation and can be easily replaced by users.

• Gas Generator

The TAC series, equipped with a long-life oil-free baby compressor, achieves significant miniaturization and cost performance while maintaining its original features. Of course, it is easy to operate with a touch panel. - Built-in inverter energy-saving operation By adopting a three-phase motor and incorporating an inverter, it can be used with the same performance at both 50/60Hz. It is also possible to choose single-phase 200V, allowing installation in general offices even without a three-phase power supply. Energy-saving control through suction time control is also included, managing the start and stop of multiple built-in compressors to avoid unnecessary operation. - High performance and space-saving While maintaining the same performance as devices with the same output, it achieves a volume ratio of 72.5% in dimensions, with actual measured noise levels around 60dB(A). With casters, it can be placed anywhere without restrictions.

• Gas Generator

- Performance improvement with compressors of the same output as before By reviewing the process that generates nitrogen gas, we have achieved performance improvements with compressors of the same output as before. Particularly, there is a significant performance boost at high purity levels. A high-precision oxygen concentration meter is built-in, and a 99.999% specification has been made the standard model. - New TAC energy-saving system combining three energy-saving technologies In addition to the adsorption/desorption cycle and compressor start-stop control, the number of built-in compressors and the PSA units are also controlled collectively according to the flow rate. Devices with multiple built-in PSA units (4.4 kW to 11 kW) can achieve more precise energy-saving operation. - Low noise, low vibration, and space-saving design The PSA units have been miniaturized to the extreme, and devices ranging from 4.4 kW to 7.5 kW have been further reduced in size. With a built-in scroll compressor, they operate with low noise and low vibration, making them suitable for installation on-site, even in densely populated residential areas and during nighttime. - Long maintenance cycle All unit switching valves use air-operated valves, and the maintenance cycle for the PSA units is two years. During long-life maintenance, quick responses can be provided at service centers nationwide, along with the compressor parts.

• Gas Generator

We handle a wide range of scientific and chemical products, including beakers and flasks from As One products, as well as products from Yamato Scientific and Horiba. We provide support for everything from quotes to purchases. Please feel free to consult us. To register for Rikapochi, click here↓↓ https://kyotorika.co.jp/rikapochi/

• Drying Equipment
• Heating device
• Glassware and containers

This is an optional product for the Sampling Bag Cleaner SBC-10. It can supply humidified gas to the sampling bag using a bubbling method, allowing for the removal of more impurities inside the sampling bag.

• Other physicochemical equipment
• Contract measurement

The "SBC-10" is a cleaner that can wash sampling bags ranging from 1L to 50L using an air compressor and nitrogen gas. Attaching the sampling bags is easy. By providing a tube connection port at the top, inserting and removing the tube can be done effortlessly. Additionally, various conditions such as capacity and number of washes can be set. 【Features】 ■ Easy to use for anyone with touch panel operation ■ Equipped with a sampling bag burst prevention feature ■ Can simultaneously wash sampling bags of different capacities for each line ■ Washing conditions can be saved ■ Uses fluorine-based rubber for gas contact parts *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The "SMC-10A" is a simple microchamber that allows for the collection of outgassing samples and the conditioning of TD (GC heating desorption device) collection tubes. It enables a simple dynamic headspace method by heating a small amount of sample in a dedicated glass tube. Up to 10 dedicated glass tubes can be attached. Additionally, we also offer a tube conditioner "SMC-10B" that can be exchanged for different applications. 【Features】 ■ Dedicated glass tubes with an outer diameter of 16mm can be used ■ Up to 10 tubes can be set ■ A simple dynamic headspace method is possible ■ Outgassing sample collection can be easily performed ■ Temperature program settings are possible *For more details, please refer to the PDF document or feel free to contact us.

• Electric furnace

You can choose from optical microscopes, confocal laser microscopes, atomic force microscopes, and fluorescence X-ray microscopes, depending on your needs. For more details, please contact us.

• Other physicochemical equipment

It is possible to condition the collection tube used in the thermal desorption device.

• Other physicochemical equipment
• Other environmental analysis equipment
• Analytical Equipment and Devices