NISSIN KAGAKU KENKYUSHO List of Products and Services

This product is an environmentally friendly dissolving and peeling cleaning agent compatible with various resins such as adhesives, tackifiers, molding resins, and coatings. We offer dedicated grades tailored to specific applications and types of resins, achieving a balance between cleaning efficiency and safety. It is generally not classified as a toxic substance, a specified chemical substance, or an organic solvent under relevant regulations, and it takes into consideration the health of workers. Despite being free of chlorine and aromatic compounds, it demonstrates excellent dissolving power. Furthermore, it is a water-soluble type (with some exceptions), allowing for easy post-processing by simply rinsing with water, significantly reducing environmental impact.

• Chemicals

This document is a collection of case studies on cleaning agents that Nisshin Chemical Research Institute Co., Ltd. has used to resolve issues. It includes numerous examples of scale contamination on strainers, scale in cooling pipes, and the walls of water storage tanks. Our company engages in the research, development, and manufacturing of cleaning agents, lubricants, defoamers, antistatic agents, etc., and we customize chemicals to meet our customers' needs. ◆ Currently offering a collection of problem-solving case studies! You can view it via PDF download. 【Featured Cases (Excerpt)】 - Scale contamination on strainers - Scale in cooling pipes - Cleaning of lubricant tanks and pipes for copper wire manufacturers - Walls of water storage tanks... *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

Our company is a chemical assistant that solves problems in production sites. We handle over 1,000 types of products, including defoamers, coagulants, algaecides, and deodorants. In the sedimentation tanks of paper mills, issues such as appearance defects due to foaming in the wastewater process and environmental impacts from SS discharge were problematic. By using a defoamer, we significantly improved the outflow of foam and SS. Additionally, the amount of defoamer used at the discharge point was reduced, leading to cost savings. We have various other achievements as well. Please feel free to consult us. 【List of Cases】 ■ [Defoamer] Foam countermeasure case ■ [Polymer coagulant] Selection case ■ [Algaecide] Cleaning case for algae and slime ■ [Deodorant] Selection case 【Products We Handle】 ■ Defoamer ■ Coagulant ■ Algaecide ■ Deodorant ■ Deodorant ■ Pipe cleaning agent ■ Other chemicals *For more details, please refer to the PDF materials or feel free to contact us.

• Other consumables
• Chemicals

Our company is a chemical assistant that solves problems in production sites. We handle over 1,000 types of products, including defoamers, coagulants, algaecides, and deodorants. In the coagulation sedimentation tank of a paper mill, issues such as appearance defects caused by foaming during the wastewater process and environmental impacts due to SS outflow were problematic. By using a defoamer, we significantly improved the outflow of foam and SS. Additionally, the amount of defoamer used at the discharge point was reduced, leading to cost savings. We have various other achievements as well. Please feel free to consult us. [Case Examples] ■ [Defoamer] Foam countermeasure case ■ [Polymer coagulant] Selection case ■ [Algaecide] Cleaning case for algae and slime ■ [Deodorant] Selection case *For more details, please refer to the PDF materials or feel free to contact us.

• Other consumables
• Chemicals

What is Static Electricity? Static electricity occurs when electrons accumulate or become unevenly distributed on an insulating material due to friction or separation. This results in an electrostatic charge that can cause a momentary high-voltage discharge, leading to problems such as electric shock, malfunction or physical damage to precision devices, and even ignition. Charged surfaces also attract dust, dirt, and pollen through electrostatic forces, which can cause surface contamination. About Our Antistatic Agents Our antistatic agents incorporate ionic conductive materials—which act as electron carriers—to reduce the influence of humidity. Polymer-based types are also available. We provide customized formulations tailored to specific applications and operating conditions, ensuring optimal antistatic performance. Please feel free to contact us for consultation or product recommendations. Application Examples ・Optical components for LCD displays ・Packaging PET films ・PET films for paper-based laminate processing ・Offset rotary printing systems for commercial printing ・Synthetic fibers for spinning ・Foamed silicone rubber sheets …and more.

• Chemicals

This document is a collection of case studies showcasing how NISSIN KAGAKU KENKYUSHO Co., Ltd. has solved various cleaning challenges. It includes numerous examples, such as scale buildup on strainers, deposits in cooling pipes, and sludge on the walls of water retention tanks. Our company specializes in research, development, manufacturing, and sales of cleaning agents, lubricants, defoamers, antistatic agents, and more. We also customize chemical solutions to meet the specific needs of our customers. ◆ Available Now: Problem-Solving Case Studies You can download the full collection as a PDF. Featured Cases (Excerpt) ・Scale deposits on strainers ・Scale in cooling pipes ・Cleaning of lubricant tanks and pipes for copper wire manufacturers ・Walls of water retention tanks For more details, please refer to the PDF or contact us for further information.

• Chemicals

We would like to introduce our products, "Kokinstar" and "Caplone." Kokinstar is an antibacterial and deodorizing agent that can be applied to paper, fiber, and resin products. We select the most suitable agents based on antibacterial tests conducted against standard bacteria according to your requirements. Caplone is an antistatic agent that provides added functional value beyond simply preventing static electricity. It not only eliminates static-related issues but also helps improve productivity. Features of Kokinstar Applicable to paper, fiber, and resin products Selection of appropriate agents based on antibacterial tests against standard bacteria, tailored to your requirements Antibacterial evaluation of processed products is also available Implementation and support can be provided according to your needs For more details, please refer to the attached PDF document or feel free to contact us.

• Other consumables
• Chemicals

"Derastar" is a chemical agent designed to remove rust and discoloration caused by oxide films on metal surfaces, effectively restoring the metal’s original appearance. Because the optimal rust remover depends on the type of metal and the usage environment, we conduct laboratory-scale evaluation tests to determine the most suitable formulation. In addition to rust removal and surface restoration, we also offer the "Nissin Guard" series — our line of rust prevention agents — for protecting metal products during and after production processes. 【Features】 ■ Effectively removes rust and oxide films ■ Restores the original metallic luster ■ Laboratory-scale evaluation testing ensures the most suitable product selection ■ Usable as-is or diluted 2–5 times with water for brushing, spraying, or immersion ■ The foam-type “TG 35” is applied in its concentrated form by spraying For further information, please refer to the attached PDF or contact us directly.

• Chemicals

“Silicone Dissolution & Other Cleaning Solutions” This case study booklet introduces how our Silicone Cleaner makes it possible to dissolve and remove silicone resin stains that many had given up on. It also shares real-world solutions for removing resin paints, oily waste, and scale deposits. ■□■ Get your free copy today! ■□■ Do any of these sound familiar? Hoping to reuse jigs that used to be thrown away Struggling with manual oil removal from metal parts and wanting longer die life Dealing with narrow pipes where scale buildup is difficult and labor-intensive to remove Download the catalog or contact us now for more details! ↓↓↓　　　　　　　　　　　　　　↓↓↓

• Chemicals

It provides anti-static effects to various materials and prevents static electricity damage. This is a surface coating anti-static liquid that can be used on various plastic parts, films, paper and textile products, silicone components, and more. Additionally, we can customize it based on application and usage conditions to propose the most suitable anti-static liquid. Please feel free to contact us for inquiries and consultations.

• others

Kokinstar is an antibacterial and deodorizing agent that can be applied to paper, textiles, resin products, and more. Based on your needs, we carry out antibacterial testing with standard bacteria to select the most suitable agent. With many years of experience as a trusted supplier to the paper pulp, nonwoven, and textile industries, Nisshin Chemical Laboratory delivers proven antibacterial and deodorizing solutions. We can also provide antibacterial evaluations for your finished products upon request. 【Key Benefits】 ■ Adds antibacterial and deodorizing performance to textiles, paper products, and films ■ Selection of the right agent through antibacterial testing with standard bacteria ■ Antibacterial evaluation of finished products available upon request For details, please download the PDF or contact us directly.

• Chemicals

The 'Resin Dissolution and Other Cleaning Issues and Solutions' is a case study document that summarizes common cleaning problems and their solutions encountered in work environments, such as coating equipment, nozzles, processes, coolers, and cooling pipes. ■□■ We are currently offering this case study document for free! ■□■ 【Do you have any of these concerns?】 ■ The silicone resin used in the release layer has hardened and cannot be removed... ■ When algae or slime adhere to the pipes, cooling efficiency decreases... ■ Scale builds up in narrow pipes, making physical removal very labor-intensive... 【For more details, please download the catalog or feel free to contact us】 ↓　↓　↓　　　　　　　　　　　　↓　↓　↓

• Chemicals

Problem: Frequent web breaks in the press open draw made it difficult to improve productivity. Increasing the chemical dosage in the roll doctor shower had no effect. Solution: We replaced the competitor’s product with HITOUCH SPH-3, dosed at 2 cc/min per meter of paper width. Result: Chemical costs were reduced by 40%, and press draw improved by 0.2 points. 【Case Summary】 ■ Issues ・Frequent web breaks in the press open draw, lowering productivity ・No improvement even with higher dosing in the roll doctor shower For further details, please download the PDF or contact us directly.

• Chemicals

Problems such as “spoilage and odor generation of sizing starch solution in storage tanks” and “bacterial counts exceeding 1,000 cfu/ml several times a year (especially in summer)” had been reported. Because starch solutions are neutral and prone to spoilage, a faster-acting preservative was required compared to conventional products. Therefore, Statect 231 was shock-dosed 36 times per day at high frequency. As a result, bacterial counts were successfully maintained below 100 cfu/ml throughout the year. 【Case Study】 ■ Challenges Spoilage and odor of sizing starch solution in storage tanks Bacterial growth exceeding 1,000 cfu/ml several times a year (especially in summer) For more details, please refer to the PDF or feel free to contact us.** **Challenges included “sizing starch solutions spoiling and producing odors in storage tanks” and “bacteria levels rising above 1,000 cfu/ml several times a year, especially in summer.” Since starch solutions are neutral and easily spoil, a faster-acting preservative was needed. By shock-dosing Statect 231 36 times per day, bacterial counts were kept under 100 cfu/ml all year round. 【Case Summary】 ■ Problems Spoilage and odor in starch sizing solution storage tanks Bacterial counts over 1,000 cfu/ml occurring several times a year (particularly in summer) For details, please download the PDF or contact us directly.

• Chemicals

Foam in wastewater wasn’t just caused by SS runoff—it also spoiled the appearance, leaving a poor impression in terms of environmental impact and cleanliness. From our wide product lineup and proven track record, we selected the right solution and customized it to match the foaming conditions. The result: a major reduction in SS runoff, along with lower defoamer usage and cost savings. 【Case Summary】 ■ Problem Wastewater foaming not only came from SS runoff but also spoiled the appearance, creating environmental and aesthetic concerns For details, please download the PDF or contact us directly.

• Chemicals

Case Summary 【Challenges】 Foaming during coating caused streaks, leading to a decline in paper quality. Excessive addition of defoamer to control foaming resulted in oil spots on the paper surface. 【Approach】 To address these issues, we conducted a combination of foam suppression tests and repellency (wettability) tests to identify the most suitable defoamer. 【Results】 The optimized defoamer reduced oil spots, eliminated streak formation, and improved repellency, resulting in better paper quality and cost reduction. Example Overview Problem: ・Foaming in coating liquids caused streaks and degraded paper quality. ・Excessive defoamer dosage led to oil spot formation. For more details, please refer to the attached PDF or feel free to contact us.

• Chemicals

As summer arrived, the water temperature in the DIP manufacturing process increased, exceeding the effective temperature range for typical deinking agents, resulting in a decrease in whiteness and ink removal rates. To address this, we added the high boiling point product 'DIA-Z-300' to the pulper. This resulted in a 1 point increase in whiteness and a reduction in residual ink, allowing us to enhance whiteness without compromising productivity. 【Case Summary】 ■Issue - With the arrival of summer and the rise in water temperature in the DIP manufacturing process, typical deinking agents became ineffective, leading to a decrease in whiteness and ink removal rates. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

Case Summary ■ Challenge Excessive foaming in white water silos, with limited effect even after adding defoamer. To prevent foam overflow from the silo, large amounts of defoamer were continuously added. ■ Approach A comparative lab evaluation was conducted using actual white water samples. Based on the results, a different type of defoamer was proposed. ■ Results In on-site trials, the new defoamer achieved better performance even with only one-third of the previous dosage, and although its unit price was 1.8 times higher, the total cost was reduced by 40%. For more details, please refer to the PDF brochure or feel free to contact us.

• Chemicals

Wires are more prone to dirt compared to felt, and it is difficult to remove the attached dirt. Additionally, they deteriorate due to wear and need to be replaced. Therefore, we used the wire cleaning agent 'W-EX' on the wire ear section for cleaning. By introducing a hydrophilic group to form a protective film of polyester, we were able to reduce wire wear and extend its lifespan. Furthermore, by forming a hydrophilic film, it became less likely for dirt to adhere. [Summary] ■Issues - Wires are more prone to dirt compared to felt, and it is difficult to remove the attached dirt. - They deteriorate due to wear and need to be replaced. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

A large amount of foreign matter, believed to be calcium carbonate, was adhering to the felt suction box and causing problems. To address this, continuous cleaning was carried out using Newtron APL-78, which provides excellent cleaning power and chelating effects against inorganic deposits. As a result, the growth of scale on the suction box was suppressed, and felt analysis confirmed a significant reduction in contamination. 【Case Overview】 ■ Challenge ・Heavy deposits, thought to be calcium carbonate, were accumulating on the felt suction box For more details, please refer to the PDF or feel free to contact us.

• Chemicals

The decline in recovered paper quality has led to a rise in pitch-related defects, resulting in more damaged paper and an increase in quality complaints. To monitor the problem, we measured the amount of pitch by transferring white pigment onto the adhesive areas. By introducing “High Touch MP”, we successfully suppressed pitch aggregation and growth, significantly reducing pitch-related issues and improving overall paper quality. 【Case Summary】 Concern Declining recovered paper quality caused more pitch defects, leading to damaged paper and a rise in quality complaints. For further details, please see the attached PDF or contact us.

• Chemicals

The filter inside the extractor became clogged with slime, requiring several cleanings between SDs. Therefore, we continuously added 25 ppm of "Hiclean AC" relative to the water volume. The dewatering performance of the disk filter and extractor dramatically improved, leading to increased productivity and cost reduction. 【Summary】 ■Issue - The filter inside the extractor became clogged with slime, requiring several cleanings between SDs. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

There were concerns such as 'There is a lot of dirt on the super calendar, and productivity is poor' and 'With conventional release agents, there is particularly a lot of dirt during gravure coating.' Therefore, we switched from the conventional product to 'DEF-795TF.' This led to a reduction in super calendar dirt and a decrease in streaks during coating, contributing to improved productivity. [Case Study] ■ Concerns - There is a lot of dirt on the super calendar, and productivity is poor. - With conventional release agents, there is particularly a lot of dirt during gravure coating. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

You were struggling with low productivity due to inefficient floss discharge caused by insufficient foamability of the deinking agent currently in use. By adding 200 ppm of "DIA-Z-313" before FT, the foam height of FT was increased. As a result, the amount of floss removed increased, whiteness improved, and residual ink decreased. 【Summary】 ■Concern - The deinking agent currently in use does not provide sufficient foamability for efficient floss discharge, leading to low productivity. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

Silicone resin from sealants and packings would stick stubbornly to jigs, making removal nearly impossible. In the worst cases, the entire part had to be replaced. With Silicone Cleaner X-50, simply immersing the resin for 30 minutes partially dissolved it, allowing it to be wiped away effortlessly. The result: cleaning time was dramatically shortened, parts no longer needed to be replaced, and major labor and maintenance cost savings were achieved. 【Case Summary】 ■ Problem Silicone resin from sealants and packings adhered to jigs and could not be removed In the worst cases, full part replacement was necessary For details, please download the PDF or contact us directly.

• Chemicals

In the paper mill, a large amount of machine oil was adhering to the conveyor belts used for transporting paper, causing quality issues. Therefore, we used the cleaning agent 'Newtron IAS'. We successfully removed over 90% of the oil stains that were causing defects. As a result, quality problems were reduced to one-fifth of the previous level, eliminating the associated risks in the work environment. [Case Summary] ■Concern - Oil stains were adhering to the paper conveyor belts in the paper manufacturing process, which transferred to the paper products, requiring workers to regularly clean them manually, creating a hazardous work environment. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

A slime-like adhesive substance appeared on the wall, and it was further stained green by algae. We had a problem with this. Therefore, we added 'Hihclean AC' at 500 ppm every week, relative to the amount of water held. It was over 20 times more effective compared to caustic soda, and the pH in the water decreased to around 9, improving safety during handling. 【Case Overview】 ■Problem - Slime-like adhesive substance appeared on the wall - Stained green by algae *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

Cleaner Systems with Control QA-2 During metal processing with water-soluble lubricants, metal soap waste is inevitably generated. Over time, this waste builds up inside machines and piping, causing contamination. Such deposits can reduce product quality, increase downtime, and shorten the lifespan of both tools and lubricants. With Control QA-2, maintenance becomes simple and effective. By adding it to the lubricant tank and circulating for 24 hours, accumulated waste in tanks and piping is dissolved and removed. The used solution can be disposed of directly as waste—no complicated procedures are required. Compared with conventional water or caustic cleaning, Control QA-2 delivers a far higher removal rate, helping manufacturers maintain cleaner systems, longer lubricant life, and more stable production. Case Summary Issues Metal soap waste generated during metal processing with water-soluble lubricants accumulates in machines and piping. This buildup leads to lower product quality and reduces the service life of tools and lubricants. For more details, please see the PDF or contact us for further information.

• Chemicals

There were concerns such as 'scale buildup, narrowing of the cooling pipes, and poor cooling efficiency' and 'the need for regular cleaning, which is labor-intensive.' Therefore, we removed the calcium carbonate that had adhered inside the pipes using 'Control MF-2.' After that, by using the scale prevention agent 'Control PSV,' we suppressed the occurrence of scale. As a result, we were able to remove the scale without removing the pipes, and the use of the scale prevention agent significantly reduced the frequency of subsequent cleanings. [Case Overview] ■ Concerns - Scale buildup, narrowing of the cooling pipes, and poor cooling efficiency - The need for regular cleaning, which is labor-intensive *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We are a chemical company with our headquarters and primary factory located in Osaka JAPAN. NISSIN KAGAKU KENKYUSHO, which translates to NISSIN Chemical Laboratory, was founded in 1931. Since our foundation, we have been a research and development-focused company specializing in surfactants, enzymes, and biotechnologies to address production challenges at various manufacturing sites. We conduct research and develop specialized chemicals tailored to meet our customers' requirements, enabling stable and efficient manufacturing in industries like paper products, textiles, printing, and other processes integral to your daily life. Are you facing any of the following issues...? - Scale deposits clinging to pipes - Algae and slime contamination in water tanks and pipes - Foam overflowing from drains - Rust that you have given up on, among others.

• Chemicals

We are here to help. Our motto is to provide customized chemical solutions tailored to each customer’s specific needs. We strive to offer proposals that address your challenges, along with technical services from our sales engineers. A handbook of case studies on various troubleshooting solutions is available for download below

• Chemicals

◎Joint Research - Can we create such a chemical? - I want to remove such stains. - I want to emulsify ○○. - Is it possible to uniformly mix △△ and ××? We will assist in the development of new products based on these requests. ◎Contract Manufacturing - I am looking for a new manufacturing partner. - I am considering diversifying manufacturing risks in preparation for potential disasters. - I want to reduce the manufacturing and management costs of products. Please feel free to consult with us. (We also accept contract manufacturing from small quantities.) Additionally, we will enter into a non-disclosure agreement as needed. >>> Our Strengths <<< • Over half a century of research and development experience • All products are independently developed as an independent manufacturer • More than 10 years of experience in obtaining ISO 9001, the world standard for quality management systems.

• Chemicals

We are offering a free handbook titled “Troubleshooting Case Studies to Help You Choose Cleaning Agents”! NISSIN KAGAKU KENKYUSHO provides expert support for pipe cleaning agents, defoamers, water-based release agents, preservatives, antistatic agents, and more. 【Contents】 ◆Troubleshooting Case Studies ・Scale in strainers and cooling pipes ・Contamination in lubrication tanks and pipes at copper wire manufacturers ・Slime buildup on the walls of water storage tanks ・Oil contamination in the papermaking process ・Silicone contamination Free Know-How Materials To receive your copy, please submit a request through our inquiry form. For more details, please contact us or download the PDF.

• Chemicals
• Cleaning agents

【About the cleaning agents "Control" and "Hiclean"】 The dirt that adheres to machinery and piping can include the following: 1. Scale (inorganic compounds such as calcium and magnesium) 2. Slime (microbial contamination) 3. Pitch (organic contaminants such as oils and fats) We provide cleaning agents that effectively remove the above contaminants. We will introduce the appropriate cleaning agent based on the material of the equipment used and the type of dirt. Customization of cleaning agents according to your specific application is also possible. 【We have several types available, so please call us to select the appropriate cleaning agent】 【Regarding free lab evaluation】 *Customers who wish to have a lab evaluation should contact us with "Lab evaluation request" noted. *For details, please download the catalog or contact us directly.

• Chemicals
• Cleaning agents

It prevents blocking between sheets of surface-coated (liquid type) materials. Thanks to its anti-static effect, it reduces blocking of plastic sheets and films (such as PET, PC, ABS, AS resin, etc.). The scratch prevention effect due to reduced friction contributes to improved yield. It is compatible with optical-grade products such as optical sheets and polarizers for LCD monitors. Additionally, we can customize based on application and usage conditions to propose the optimal blocking prevention liquid. Please feel free to contact us for inquiries and consultations.

• Chemicals

Regarding the amendment of the Water Quality Pollution Prevention Act◆ A law partially amending the Water Quality Pollution Prevention Act will come into effect on June 1, 2012. Under this law, new provisions have been established requiring facility operators who use or store harmful substances to comply with standards regarding the structure, equipment, and methods of use to prevent underground infiltration of harmful substances, in order to prevent contamination of groundwater. (Reference: Ministry of the Environment website; http://www.env.go.jp/water/chikasui/brief2012.html) ☆ Our company offers an environmentally friendly non-boron-based pretreatment agent (Adcoat series). ◆ You can continue to use your existing recycling equipment as is. ◆ It is a water-soluble type, making it easy to handle.

• Chemicals

When bacteria proliferate in process water, they secrete adhesive components primarily composed of polysaccharides, leading to the formation of sticky clumps of dirt (slime) by incorporating various substances. The slime intermittently peels off the walls, causing blockages in the piping and covering the coolers, which results in a decrease in thermal efficiency and negatively impacts operations. 'HICLEAN' is a chemical designed to address slime troubles in the process water circulation systems of various factories. By regularly adding it, discoloration in the process due to water contamination, pump blockages caused by slime, and contamination of products can be prevented in advance. 【Features】 ■ Powerful cleaning of microbial contamination ■ Prevents the occurrence of slime ■ Prevents discoloration in the process due to water contamination, pump blockages due to slime, and contamination of products *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

During construction board manufacturing, resins, PVA, and strength additives are used as dispersants, all of which tend to cause foaming. The presence of inorganic fillers further stabilizes the foam, leading to problems in the sheet-forming process and reduced drainage, which in turn affects product quality. Our Bisfoam Series defoamers are designed for construction board production—just a small amount improves drainage and boosts productivity.

• Chemicals

In metal cutting and grinding processes, lubricants are used to reduce friction between the workpiece and the cutting tool. By using the appropriate lubricant, it is possible to improve the quality of the workpiece, extend the lifespan of the cutting tool, and enhance workability. The "Rapple Series" is primarily based on uniquely designed surfactants, maintaining lubrication while achieving high cleaning performance. As a result, the workpiece and cutting tool can be kept clean, avoiding quality and operational issues. 【Features】 ■ High cooling effect, eliminating concerns about smoke or fire ■ Minimal stickiness on the workpiece, easily cleaned with just water ■ Reduced dirt on tools and work areas, improving the working environment ■ Economical as it is used diluted with water ■ Free from environmentally harmful substances such as halogens and heavy metals *For more details, please refer to the PDF materials or feel free to contact us.

• Chemicals

“Nissin Guard” is a specialized chemical agent that prevents rust formation by creating an anti-oxidation film on metal surfaces. Because the most effective rust inhibitor varies depending on the type of metal, we conduct lab-scale corrosion prevention tests to determine the optimal formulation. If you are experiencing rust contamination in piping or during processing, we recommend first cleaning with our “Control Series” process cleaning agent before applying this product. Features ・Forms a protective film on metal surfaces ・Prevents rust formation before it occurs ・Optimal inhibitor selected through lab-scale corrosion prevention tests For more details, please refer to the attached PDF or feel free to contact us.

• Chemicals

In electroplating, the generation of bubbles adversely affects product quality. The defoamer "Bisfoam Series" for electric field plating layers can improve filterability and enhance productivity with a small amount of use.

• Chemicals

[Limited Offer – Only 24 Samples Available] We are offering free samples of our industrial cleaning agents designed to remove and prevent contamination inside machinery and piping systems, including microbial fouling. About Our Cleaning Agents “Control” and “Hiclean” Contamination that typically adheres to machinery and piping includes: Scale – inorganic deposits such as calcium and magnesium compounds Slime – microbial contamination and biofilm Pitch – organic residues such as oils and fats Our cleaning agents effectively remove these types of fouling. We will recommend the most suitable cleaner depending on the material of your equipment and the type of contamination. Custom formulations can also be developed to meet your specific needs. Free Sample Campaign (Limited to 24 Customers) If you would like to receive a free sample, please select “Request Sample” on the inquiry form and send us your request. (Since there are several types of cleaners available, our staff will contact you by phone to help select the most appropriate product.) For further details, please download our catalog or contact us directly.

• Chemicals
• Cleaning agents

Fiber softeners are functional processing agents designed to give fibers softness and texture, enhancing the added value of textile products. "Silicon Star" forms a film on the fibers, providing excellent water repellency. Silicone has high lubricity, which reduces friction between fibers, making it suitable for a wide range of applications. In addition, we offer a variety of lineups, including the cationic "Cationic Series" and the anionic "Nissin Softer Series," tailored to your usage conditions and desired texture. 【Standard Usage Method】 ■ Dipping Method - Standard usage amount: 0.5 to 3 wt% sol. ■ Padding Method - Standard usage amount: 1 to 5% o.w.f. *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

"New Oil 30" is a dust control dusting agent that uses highly refined, safe liquid paraffin. Dust control products such as mops and mats capture dirt with their fiber parts, known as piles. When a dusting agent is applied to mops and mats, the dusting agent contained in the pile acts as an adhesive for dirt, retaining the dirt once it has been absorbed. Subsequently, as the dusting agent migrates to the absorbed dirt, the dirt works as part of the pile, leading to a snowball effect of dirt accumulation. [Features] - Ionic: Non-ionic - Appearance: Transparent liquid - Uses highly refined, safe liquid paraffin - Good compatibility with water and excellent cleaning properties - Stable against sunlight and heat *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

Achieving both cleaning and lubrication! A wet drawing lubricant that improves sliding with minimal usage. The feature of Rapple is its ability to balance high cleaning and lubrication properties. In past cases, customers who faced issues with poor adhesion of coating materials and defects in electroplating during after-drawing were able to omit the cleaning process and improve productivity due to increased line speed by using Rapple. Rapple offers a range of grades suitable for various wire diameters. Additionally, we customize based on these grades to provide the optimal lubricant for each line. Our aftercare service (regular and emergency) is also comprehensive. **Features** ◎ By achieving high cleaning and lubrication properties... ■ Omission of the cleaning process ■ Increased productivity due to higher line speed ■ Cost reduction through reduced solvent usage **Ideal for customers who:** ◎ Experience poor adhesion of wires to coating materials... ◎ Encounter defects in electroplating during after-drawing... ◎ Use excessive amounts of lubricants or cleaning agents, leading to increased effort and costs... **For more details, please download the catalog or feel free to contact us.**

• Chemicals