マルヤス機械 List of Products and Services

A roller line selector that efficiently sorts transported items. Capable of high-performance response with three refined types. Ideal for distributing the capacity of transport lines and sorting after inspection processes. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Length: 75 cm - Nominal width: 600 mm - Roller diameter: Side conveyor φ20 mm

• Conveyor
• Other conveying machines
• Conveyor

The transported items flowing in a scattered manner are aligned in spacing among each other within the conveyor flow by controlling the rotation of the conveyor rollers. 【Main Specifications】 - Reference transport mass: 20 kg/unit (distributed load) - Nominal width: 200–1200 mm - Nominal length: 90–150 cm - Roller diameter/pitch: φ10 mm, 15P

• Conveyor
• Other conveying machines
• Conveyor

We offer a thin material transport type of side alignment conveyor that aligns and gathers scattered items flowing in. This can widely respond to transport solutions in production sites. 【Main Specifications】 - Reference transport mass: 5 kg per unit (distributed load) - Length: 61 to 150 cm - Nominal width: 300 to 600 mm - Roller diameter and pitch: φ20 mm, 22 to 38.4P

• Conveyor
• Other conveying machines
• Conveyor

The rollers are made of stainless steel, making them easy to clean and hygienic. Since the rollers are equipped with built-in magnets, they can be easily attached and detached without tools. 【Main Specifications】 - Recommended transport mass: 5 kg/unit (distributed load) - Nominal width: 200–600 mm - Nominal length: 100–200 cm - Roller diameter/pitch: φ22 mm・27P

• Conveyor
• Other conveying machines
• Conveyor

Randomly flowing conveyed items are aligned in a single row at the center of the conveyor solely based on the characteristics of the conveyor, without mechanical or electrical control. It is suitable for transporting small items due to the roller pitch set at 15 mm. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Nominal width: 200–400 mm - Nominal length: 100–200 cm - Roller diameter/pitch: φ13 mm/15P

• Conveyor
• Other conveying machines
• Conveyor

The rollers can be easily attached and detached without tools, improving cleanliness. Additionally, by arranging the rollers in a staggered pattern, the stability of transported items in the center of the conveyor has been enhanced. 【Main Specifications】 - Recommended transport mass: 5 kg/unit (distributed load) - Nominal width: 400–600 mm - Nominal length: 100–200 cm - Roller diameter/pitch: φ18 mm, 22P

• Conveyor
• Other conveying machines
• Conveyor

Randomly flowing conveyed items are aligned in a single row at the center of the conveyor solely based on the characteristics of the conveyor, without mechanical or electrical control. 【Main Specifications】 - Reference conveying mass: 5 kg/unit (distributed load) - Nominal width: 200–300 mm - Nominal length: 100–200 cm - Roller diameter/pitch: φ20 mm・22P

• Conveyor
• Other conveying machines
• Conveyor

The items flowing randomly are aligned in a single line at the center of the conveyor solely based on the characteristics of the conveyor, without mechanical or electrical control. This method minimizes contact between the items compared to aligning them with guides. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Nominal width: 400–600 mm - Nominal length: 100–200 cm - Roller diameter/pitch: φ20 mm/22P

• Conveyor
• Other conveying machines
• Conveyor

The roller pitch is set to approximately half at 3° compared to the GT10H. With a narrow roller pitch, the transport of small items can be done smoothly. Additionally, the increase in the number of rollers has doubled the transport mass. 【Main Specifications】 - Reference transport mass: 20 kg/unit (distributed load) - Nominal width: 200–500 mm - Angle: 90° - Tapered roller diameter (small diameter): φ16 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a non-contact driven tapered roller curve conveyor. Black conductive grade rollers are also available. 【Main Specifications】 - Reference transport mass: 10 kg/unit (distributed load) - Nominal width: 200–500 mm - Angle: 90° - Tapered roller diameter (small diameter): φ14 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a non-contact drive corner roller conveyor that enables right-angle transport. 【Main Specifications】 - Recommended transport mass: 10 kg/unit (distributed load) - Length: 40 to 70 cm - Nominal width: 200 to 500 mm - Roller diameter/pitch: φ18 mm, 22P

• Conveyor
• Other conveying machines
• Conveyor

This is a non-contact drive accumulation roller conveyor using φ28 mm steel rollers. It is suitable for case transportation. 【Main Specifications】 - Reference transport mass: 40 kg/m (distributed load) - Length: 50 to 300 cm - Nominal width: 200 to 500 mm - Roller diameter/pitch: φ28.6 mm, 50P

• Conveyor
• Other conveying machines
• Conveyor

The frame is a flat plate, and the roller is a φ13 mm integrated resin roller. It is ideal for small transported items with a roller pitch of 15 mm. 【Main Specifications】 - Reference transport mass: 35 kg/m (distributed load) - Length: 51 to 150 cm - Roller width: 200 to 800 mm - Roller diameter/pitch: φ13 mm, 15P

• Conveyor
• Other conveying machines
• Conveyor

Adopts stainless steel rollers with built-in magnets. Non-contact drive from the motor to the conveyor rollers ensures maintenance-free and clean operation. The roller width is almost the same as the machine width, effectively utilizing the installation space of the conveyor without waste. 【Main Specifications】 - Reference transport mass: 3 kg/unit - Machine length: 15 / 20 cm - Roller width: 200–600 mm - Roller diameter/pitch: φ22 mm・25P

• Conveyor
• Other conveying machines
• Conveyor

The standard is a φ18 mm resin integrated roller, and an optional φ19 mm stainless steel roller can be installed. 【Main Specifications】 - Reference transport mass: 30 kg/m (distributed load) - Length: 100 to 300 cm - Nominal width: 200 to 500 mm - Roller diameter/pitch: φ18, 19 mm・20P

• Conveyor
• Food Conveyor Equipment
• Conveyor

The φ13 resin roller is set to a 15 mm pitch. It is ideal for small conveyed items. 【Main Specifications】 - Reference conveying mass: 25 kg/m (distributed load) - Nominal machine length: 90 to 150 cm - Roller width: 150 to 450 mm - Roller diameter/pitch: φ13 mm, 15P

• Conveyor
• Other conveying machines
• Conveyor

The top model of the Resveya series, capable of accommodating a wider range and higher capabilities. 【Main Specifications】 - Reference transport mass: 40 kg/m (distributed load) - Length: 100 to 300 cm - Nominal width: 300 to 1300 mm - Roller diameter and pitch: φ22 mm, 25P, 35P

• Conveyor
• Other conveying machines
• Conveyor

The transport surface is divided into two parts, allowing for simultaneous forward and reverse operation with a single motor, enabling alternating operation. The roller pitch is 40 mm. 【Main Specifications】 - Reference transport mass: 20 kg/m (distributed load) - Length: 100 to 300 cm - Nominal width: 200 to 500 mm - Roller diameter/pitch: φ18 mm, 40P

• Conveyor
• Other conveying machines
• Conveyor

The drive transmission from the motor to the drive shaft is also performed non-contact, enabling clean transport. The motor mounting position can be selected arbitrarily, allowing for a wide range of applications from standard products to system products. 【Main Specifications】 - Reference transport mass: 6 kg/m - Length: 50–200 cm - Nominal width: 200–500 mm - Roller diameter/pitch: φ18 mm/20P

• Conveyor
• Other conveying machines
• Conveyor

Equipped with an easy-to-familiarize 1-ply belt as standard. The belt retention force is improved with a 1-motor, 2-drive system. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed transport) - Belt width: 300–600 mm - Tail roller: φ20 straight roller - Frame: Steel

• Conveyor
• Other conveying machines
• Conveyor

This is a small belt curve conveyor. The tapered tail roller allows for even more stable transport when an optional transfer roller is installed. 【Main Specifications】 - Recommended transport weight: 17 kg/unit (distributed transport) - Tail roller: tapered roller - Frame: steel - Nominal belt width: 200–600 mm

• Conveyor
• Other conveying machines
• Conveyor

A telescopic conveyor that can extend and retract. With a center drive system, the tail rollers at both ends can be made smaller in diameter. The transfer of small items is smooth. It features a user-friendly design that allows for extension and retraction operations from both sides of the conveyor. 【Main Specifications】 - Recommended transport mass: 10 kg/unit (distributed load) - Belt width: 100–600 mm - Length: 70–195 cm - Tail roller: φ34 mm

• Conveyor
• Other conveying machines
• Conveyor

With a new idea of twisting the conveyor belt, we have achieved the ability to flip transported items without the need for height differences in the transport line. By supporting and flipping with the belt, we minimize variations in transport pitch and achieve high-capacity, gentle transportation. 【Main Specifications】 - Reference transport mass: 1.5 kg/unit (distributed load) - Belt width: 100/150 mm - Length: 70/110 cm - Tail roller: φ 33.5 mm

• Conveyor
• Other conveying machines
• Conveyor

It is a conveyor that transfers (shifts) at a 45° angle, with one side having a right-angle roller edge. It can be used in combination with other MBJs for right-angle transfers or as a high-speed conveyor. 【Main Specifications】 - Recommended transport mass: 5 kg/unit - Length: up to 200 cm - Tail roller: φ20 mm - Nominal belt width: 200–400 mm

• Conveyor
• Other conveying machines
• Conveyor

Ideal for transporting bulk materials on steep inclines. The bucket section is available in two types: resin and steel, and the frame is also available in two types: steel and stainless steel. 【Main Specifications】 - Approximate transport capacity: 0.8 cm³/h - Minimum height at the inlet side: 300 mm (when using 10P) - Lifting height: up to 400 cm - Bucket width: 10 to 60 cm

• Conveyor
• Other conveying machines
• Conveyor

Softly transports loose items at a maximum incline of 75°. You can choose from four types: Type A with horizontal upper and lower sections, Type B with a horizontal lower section, Type C with a horizontal upper section, and Type D with only an incline. 【Main Specifications】 - Recommended transport weight: 25 kg/unit - Belt width: 300–600 mm - Tail roller: φ171.2 mm (drive) - Minimum height at the entrance side: 370 mm

• Conveyor
• Other conveying machines
• Conveyor

A conveyor with a side wall and support for inclined transport with height differences. It can handle steep inclines from 45° to 75°, and you can choose from four types of transport configurations. 【Main Specifications】 - Reference transport mass: 5 kg/unit - Belt width: 150–300 mm - Tail roller: φ120.3 mm (drive) - Minimum height at the entrance side: 225 mm

• Conveyor
• Other conveying machines
• Conveyor

Handles the retrieval and transportation of small, lightweight products from packaging machines, forming machines, press machinery, and various food machinery. Additionally, a flat belt type configuration is available as an option. 【Main Specifications】 - Reference transport mass: 36 kg/unit (distributed load) - Belt width: 100–600 mm - Length: 60–600 cm - Tail roller: φ114.3 mm (drive)

• Conveyor
• Other conveying machines
• Conveyor

This is a compact type of 2-pulley conveyor with an easy-to-use simple structure. There are two types: the HS type with the motor on the side of the frame and the OD type with the motor above the conveying surface. 【Main Specifications】 - Recommended conveying weight: 6 kg/unit - Belt width: 100–600 mm - Length: 60–300 cm - Tail roller: φ60.5 mm (drive)

• Conveyor
• Other conveying machines
• Conveyor

This is a compact type of 2-pulley conveyor with an easy-to-use simple structure. The small drive pulley allows for smooth transfer of small items. 【Main Specifications】 - Recommended transport weight: 5 kg/unit - Belt width: 100–600 mm - Length: 60–300 cm - Tail roller: φ38 mm (drive)

• Conveyor
• Other conveying machines
• Conveyor

A special belt bent in a V shape is installed. It aligns the rows and posture of the transported items without using guides. Additionally, when items are transferred by dropping them in from a right angle, if selected for the receiving conveyor, it can align the posture without the need for stoppers or guides. 【Main Specifications】 - Reference transport mass: 2.5 kg/unit - Nominal belt width: 100 / 200 / 300 - Length: 100 / 150 / 235 - Tail roller: φ27.2 mm

• Conveyor
• Other conveying machines
• Conveyor

Since the belt surface and the main body frame are on the same plane, it is effective when transferring items at right angles or when wanting to place them in narrow spaces. 【Main Specifications】 - Reference transport weight: 25 kg/unit (distributed load) - Belt width: 75–500 mm - Length: 100–600 cm - Tail roller: φ27.2 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a high-performance, high-quality conveyor that supports high-speed and 24-hour operation. Additionally, it features a design where the tail roller is not visible, ensuring safety. 【Main Specifications】 - Recommended transport mass: 35 kg/unit - Belt width: 50–600 mm - Length: 50–1000 cm - Tail roller: φ34 mm

• Conveyor
• Other conveying machines

This is a drive roller conveyor for light transport. It features stainless steel rollers with a diameter of 19 mm and a frame made of aesthetically pleasing aluminum extrusions. 【Main Specifications】 - Reference transport mass: 12 kg/m - Length: 80 to 400 cm - Roller width: 200 to 500 mm - Roller diameter and pitch: φ19 mm, 20P

• Conveyor
• Other conveying machines
• Conveyor

This is a small diameter accumulation conveyor with a round belt drive that allows for the stopping, deceleration, and reverse movement of transported items. 【Main Specifications】 - Reference transport mass: 12 kg/m - Length: 80 to 400 cm - Roller width: 200 to 800 mm - Roller diameter/pitch: φ18 mm, 20P

• Conveyor
• Other conveying machines
• Conveyor

To accommodate smaller conveyed items, we have adopted small-diameter rollers (φ13) and achieved a 15 mm pitch. The drive system is the same flat belt drive method as the MRA1. 【Main Specifications】 - Reference conveying mass: 14 kg/m - Length: 90 to 300 cm - Roller width: 200 to 500 mm - Roller diameter/pitch: φ13 mm, 15P

• Conveyor
• Other conveying machines
• Conveyor

MTC-H excels in space-saving with the smallest inner radius of roller conveyors. The mechanism has been improved to enhance maintainability. 【Main Specifications】 - Reference transport mass: 10 kg/unit - Frame: Steel - Angle: 90° - Roller width: 200–400 mm

• Conveyor
• Other conveying machines
• Conveyor

We use resin rollers with a diameter of 18mm that can transport small items. There is also low line pressure, allowing for a buffering function within the conveyor line. The rollers are treated for static electricity prevention. 【Main Specifications】 - Reference transport mass: 12 kg/m - Length: 80 to 400 cm - Roller width: 200 to 800 mm - Roller diameter/pitch: φ18 mm, 20P

• Conveyor
• Other conveying devices
• Conveyor

This is a curve-type conveyor using clip drive. The appearance and shape are unchanged from conventional models, but it has achieved improved durability against water, powder, and oil. 【Main Specifications】 - Reference transport mass: 5 kg/unit - Belt width: 200–600 mm - Tail roller: φ20 mm - Angles: 90°, 60°, 45°

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

This is a standard type of counter drive that uses a round belt for power transmission. Various units can be connected to a single motor (drive unit), allowing for the transport of heavy loads compared to the 42 type and 28 type. There is a wide variety of units available, accommodating diverse layouts. 【Main Specifications】 - Reference transport mass: 50 kg/m (distributed load) - Length: 60 to 300 cm - Frame: 90×30×3.2 mm - Nominal width: 315 to 630 mm

• Conveyor
• Other conveying machines

High-speed merging of conveyed items recognized by the upstream detection sensor at a maximum of 300 items per minute. Supports 2 to 3 directions of conveyed items, achieving smooth and low-noise transport. 【Main Specifications】 - Reference transport mass: 2 kg/item (distributed load) - Length: 73 to 155 cm - Frame: Steel - Outer diameter: φ115 mm

• Conveyor
• Other conveying machines
• Conveyor

By using a Motorola as the drive unit, it has become a lightweight and compact two-pulley conveyor. It can also be used with variable speed thanks to the Spicon inverter. 【Main Specifications】 - Recommended transport mass: 5 kg/unit - Belt width: 200–500 mm - Length: 50–300 cm - Tail roller: φ 60.5 mm (drive)

• Conveyor
• Other conveying machines
• Conveyor

This is an ultra-thin conveyor with a frame thickness of 12 mm, designed to maximize space utilization. It is a convenient conveyor that fits into small spaces in production environments. 【Main Specifications】 - Reference transport mass: 4 kg/unit - Belt width: 75–200 mm - Length: 50–200 cm - Tail roller: φ 12 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a conveyor with a belt that can be easily attached and detached. The auto-tension mechanism allows for smooth operation without putting strain on the belt. Additionally, it features a design where the tail roller is not visible, ensuring safety. 【Main Specifications】 - Recommended transport weight: 35 kg/unit (distributed load) - Belt width: 100–500 mm - Length: 80–600 cm - Tail roller: φ 27.2 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a flat and straight conveyor with no protrusions on the side of the frame. It features high performance and ease of use. 【Main Specifications】 - Recommended transport weight: 25 kg/unit - Belt width: 50–500 mm - Length: 50–600 cm - Tail roller: φ 27.2 mm

• Conveyor
• Other conveying machines
• Conveyor