マルヤス機械 List of Products and Services

Connect and drive the motor roller with V-pulley and the adjacent free roller with V-pulley using a urethane V-belt. 【Main Specifications】 - Reference transport weight: 35 kg/m - Frame: [90×30×2.3 - Nominal width: 300–800 mm - Nominal length: 100–300 cm

• Conveyor
• Other conveying machines

Electric control DC motor roller conveyor suitable for logistics transportation sites. Depending on the driver selection, continuous operation and zero pressure operation (with or without control) are possible, making it a conveyor that excels in safety and operability. 【Main Specifications】 - Recommended transport mass: 50 kg/buffer - Length: 60–300 cm - Frame: [110×40×15×2.3 - Nominal width: 400–1000 mm

• Conveyor
• Other conveying machines

It is a tapered roller curve conveyor driven by a V-belt. 【Main Specifications】 - Reference transport mass: 4 kg per roller - Frame: [90×30×3.2 - Nominal width: 400–630 mm - Tapered roller (small diameter): φ42.7 mm

• Conveyor
• Other conveying machines

This is a V-belt driven roller conveyor that uses high-quality rollers, designed for high-speed operation and low noise. 【Main Specifications】 - Reference transport mass: 40 kg/m (distributed load) - Length: 60 to 400 cm - Frame: [120×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a powerful type of chain-driven accumulation roller conveyor that uses steel for Laura's sprocket. 【Main Specifications】 - Reference transport mass: 61 kg/m (distributed load) - Length: 120 to 1000 cm - Frame: [125×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a powerful type of chain-driven roller conveyor that uses steel for Laura's sprocket. 【Main Specifications】 - Reference transport mass: 76 kg/m (distributed load) - Length: 120 to 1000 cm - Frame: [125×30×3.2 (straight), [120×30×3.2 (curve) - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

Each roller is equipped with an accelerator (speed-up unit) on the inside of the sprocket, allowing the rollers to rotate at approximately three times the speed of the chain. By replacing the rollers of MCC1 and MCC2 with the rollers of MCC1-AR, they can be used as a speed-up or separation zone. 【Main Specifications】 - Reference transport mass: 64 kg/m (distributed load) - Length: 120 to 700 cm - Frame: [120×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a chain-driven accumulation roller conveyor using resin sprockets and resin chain rails. It features a frame height of 90 mm, making it lighter. 【Main Specifications】 - Reference transport mass: 55 kg/m (distributed load) - Length: 120 to 1500 cm - Frame: [ 90×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a chain-driven accumulation roller conveyor using resin sprockets and resin chain rails. 【Main Specifications】 - Reference transport mass: 55 kg/m (distributed load) - Length: 120 to 1500 cm - Frame: [125×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a chain-driven roller conveyor that uses resin sprockets and resin chain rails. It features a frame height of 90 mm, making it lighter. 【Main Specifications】 - Reference transport mass: 68 kg/m (distributed load) - Length: 120 to 1500 cm - Frame: [ 90×30×3.2 - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a chain-driven roller conveyor using resin sprockets. It achieves low noise and is suitable for medium load transportation. 【Main Specifications】 - Reference transport mass: 68 kg/m (distributed load) - Length: 120 to 1500 cm - Frame: [ 125×30×3.2 (straight), [ 120×30×3.2 (curve) - Nominal width: 400 to 1000 mm

• Conveyor
• Other conveying machines

This is a small-diameter roller type counter drive. With a roller diameter of 28.6 mm, it achieves a minimum roller pitch of 30 mm. It can be used for transporting small items with a length of 120 mm. 【Main Specifications】 - Reference transport mass: 15 kg/m (distributed load) - Length: 60 to 300 cm - Frame: [60×30×2.3 - Nominal width: 200 to 400 mm

• Conveyor
• Other conveying machines

Achieved a roller pitch of 50 mm with a counter drive using a round belt for power transmission. Capable of transporting items with a length of 200 mm. 【Main Specifications】 - Reference transport mass: 39 kg/m (distributed load) - Length: 60 to 300 cm - Frame: [90×30×3.2 - Nominal width: 315 to 630 mm

• Conveyor
• Other conveying machines

This is the aluminum frame version of the counter drive. A lightweight and aesthetically pleasing conveyor line can be constructed. 【Main Specifications】 - Reference transport mass: 50 kg/m (distributed load) - Length: 60 to 300 cm - Nominal width: 315 to 630 mm - Roller diameter: φ50.8 mm

• Conveyor
• Other conveying machines

This is a shuttle conveyor that can respond to a variety of transport needs, such as switching from vertical to horizontal transport, changing from one line to multiple lines, and discharging defective products. The adoption of an auto-tension mechanism significantly reduces the hassle of adjustments for meandering, cleaning, and replacing belts. 【Main Specifications】 - Reference transport mass: 5 kg/m (uniformly distributed load) - Belt width: 120–300 mm - Tail roller: front φ13 mm, upstream φ34 mm - Length when contracted (when the extension stroke is 20–49.9 cm): length when contracted ≥ extension stroke + 80 cm - Length when contracted (when the extension stroke is 50–100 cm): length when contracted ≥ extension stroke + 100 cm

• Conveyor
• Other conveying machines
• Conveyor

The transported items placed on the slat are sorted at high speed in two to a maximum of five directions. Sorting at a maximum capacity of 350 items per minute is possible. 【Main Specifications】 - Reference transport mass: 2 kg per unit (distributed load) - Length: 58 to 127 cm - Frame: Steel - Outer diameter: φ115 mm

• Conveyor
• Other conveying machines
• Conveyor

A conveyor unit that transports items by pinching them from both sides. It can be integrated with bottom printing equipment and assists in transferring between conveyors. By selecting the optional angle adjustment mechanism, it can also accommodate tapered items. 【Main Specifications】 - Reference transport mass: SBH2 1 kg, SBH3 2 kg - Nominal machine length: SBH2 44.5–60 cm, SBH3 48–60 cm - Nominal belt width: SBH2 50 mm, SBH3 100 mm - Motor output: SBH2 40W, SBH3 40W / 90W

• Conveyor
• Other conveying machines
• Conveyor

Can be installed on existing conveyors. It assists in the smooth flow of products. 【Main Specifications】 - Motor Output: SB1 25 W, SB2・SB3 40 W - Tail Roller: SB1 φ35 mm, SB2・SB3 φ48.6 mm - Nominal Length: SB1 35 to 100 cm, SB2 35 to 150 cm, SB3 50 to 150 cm - Nominal Belt Width: SB1 40 mm, SB2 50 mm, SB3 100 mm

• Conveyor
• Other conveying machines
• Conveyor

The tail end features an R3 knife edge, and a roller for serpentine adjustment is installed on the underside. The belt achieves stable operation with minimal strain through an automatic tensioning system. 【Main Specifications】 - Reference transport mass: 30 kg/unit (distributed load) - Belt width: 50–500 mm - Length: 50–400 cm - Tail roller: R3 mm

• Conveyor
• Other conveying machines
• Conveyor

This is a wide-type curve conveyor using clip drive. Please note that due to the nature of the clip drive, the dimensions of the outer cover vary by width. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Belt width: 800–1400 mm - Tail roller: φ20 mm - Angle: 90°

• Conveyor
• Other conveying machines
• Conveyor

This is a wide-type curved conveyor using clip drive. Please note that due to the nature of the clip drive, the dimensions of the outer cover vary by width. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Belt width: 800–1400 mm - Tail roller: φ20 mm - Angle: 90°

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It has an accumulation function with a structure similar to FCC1H. 【Main Specifications】 - Reference transport mass: 55 kg/m (distributed load) - Length: 120 to 600 cm - Frame: [ 125×30×2.0 - Nominal width: 400 to 630 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

Chain-driven roller conveyor using resin sprockets and rails. The frame, as well as the chain, rollers, and shafts, are made of stainless steel. 【Main Specifications】 - Reference transport mass: 65 kg/m (distributed load) - Length: 120 to 600 cm - Frame: [125×30×2.0 (straight), [90×30×2.0 (curve) - Nominal width: 400 to 630 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It uses an outward-bent stainless steel frame, making it easy to clean. 【Main Specifications】 - Reference transport mass: 75 kg per roller - Length: 100 to 300 cm - Frame: [90×30×2.0 - Nominal width: FMR 100 to 1000 mm, FJR 400 to 1000 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It uses an outward-bending stainless steel frame, making it easy to clean. 【Main Specifications】 - Reference transport mass: 50 kg per roller - Length: 100 to 300 cm - Frame: [90×30×2.0 - Nominal width: FMR 100 to 1000 mm, FJR 315 to 1000 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It uses an outward-bent stainless steel frame, making it easy to clean. 【Main Specifications】 - Reference transport mass: 45 kg per roller - Length: 100 to 300 cm - Frame: [90×30×2.0 - Nominal width: FMR 100 to 700 mm, FJR 315 to 630 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It uses an outward-bending stainless steel frame, making it easy to clean. 【Main Specifications】 - Reference transport mass: 40 kg per roller - Length: 100 to 300 cm - Frame: [ 60×30×2.0 - Nominal width: FMR 100 to 700 mm, FJR 200 to 630 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It is a combination of resin rollers and a stainless steel frame designed to prevent dirt and water accumulation. 【Main Specifications】 - Recommended transport mass: 2, 7, 13, 18 kg per roller - Length: 50 to 300 cm - Roller width: 100 to 400, 500, 600, 700 mm - Roller diameter: φ20, φ34, φ42, φ50 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

You can use it with peace of mind thanks to the combination of φ19 stainless steel rollers and a stainless steel frame designed to prevent dirt and water accumulation. 【Main Specifications】 - Recommended transport mass: 7 kg per roller - Length: 50 to 300 cm - Roller width: 100 to 500 mm - Roller diameter: φ19 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

Type with a 75° angle and sunshade. The standard settings are a flight (side sun) height of 50.8 mm and a mounting pitch of 163.2 mm. It is ideal for transporting items with a steep incline. 【Main Specifications】 - Recommended transport weight: 25 kg/unit (distributed load) - Feed height: 200 mm - Lifting height: 100–300 cm - Nominal belt width: 300–500 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

This is a curved type of plastic module. It uses a stainless steel frame, and the motor is waterproof. The belt width is set to a standard of 200 to 500 mm. 【Main Specifications】 - Reference transport mass: 20 kg/unit (90 W motor, distributed load) - Belt width: 200 to 500 mm - Angle: 90° - Sprocket diameter: φ98.6 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

The plastic belt is available in 11 types with 4 varieties and 3 materials. It is ideal for transporting vegetables, general food, and retort food. 【Main Specifications】 - Reference transport mass: 30 kg/unit (distributed load) - Length: 100–1000 cm - Nominal belt width: 200–600 mm - Sprocket diameter: φ104 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

Use a plastic belt like a resin belt! It can also transport items with oil that could not be handled by a resin belt. 【Main Specifications】 - Reference transport mass: 10 kg/unit (distributed load) - Length: 100–300 cm - Nominal belt width: 100–500 mm - Tail section belt outer circumference diameter: R 10.5 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

This is a net curve conveyor suitable for water drainage and oil drainage lines. 【Main Specifications】 - Reference transport mass: 2.3 kg/unit (300 width, distributed load) - Belt width: 150–600 mm - Angle: 90° - Roller diameter: φ30.0 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

Center drive conveyor with a maximum transport capacity of 100 kg, maximum length of 15 m, and maximum belt width of 1400 mm, suitable for a wide range of applications in food transportation. The optional roller edge type is also compatible with small item transport. 【Main Specifications】 - Reference transport capacity: 90 kg/unit (distributed load) - Belt width: 1100–1400 mm - Length: 150–1500 cm - Tail roller: φ60.5 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

Belt can be attached and detached with one touch. The conveyor body has waterproof properties compliant with "IP65," allowing it to be washed, and features a simple unit structure where the table and frame can be easily removed. The tail roller is a φ20 straight roller, ensuring smooth transfer even for small items. 【Main Specifications】 - Recommended transport weight: 5 kg/unit (distributed load) - Tail roller: φ20 mm (straight roller) - Nominal belt width: 300–600 mm - Angles: 45°, 60°, 90°

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

A stainless steel curved conveyor essential for an efficient line layout. Due to its small inner radius, it allows for an effective curved layout in a compact space. 【Main Specifications】 - Recommended transport mass: 17 kg/unit (distributed load) - Tail roller: Tapered roller - Nominal belt width: 200–600 mm - Angle: 90°

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

The device offers a variety of functionalities, such as simple redirection of food, conversion from horizontal to vertical alignment, separation, and the use of L and Y-shaped configurations as merging and branching devices. 【Main Specifications】 - Reference transport mass: 5 kg/unit (distributed load) - Belt width: 200–500 mm - Length: up to 200 cm - Tail roller: MAX φ34 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

With a new idea of twisting the conveyor belt, we have achieved the ability to flip transported items without the need for height differences in the transport line. By supporting and flipping with the belt, we minimize variations in transport pitch, enabling high-capacity and gentle transportation. It features a stainless steel frame tailored for food transport environments. 【Main Specifications】 - Reference transport mass: 1.5 kg/unit (distributed load) - Belt width: 100 / 150 mm - Machine length: 70 / 110 cm - Tail roller: φ33.5 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It is a manual telescopic conveyor. The auto-tension structure makes cleaning and maintenance easy. Additionally, the belt can be easily attached and detached, and it accommodates belt contraction. It features a safety design with no gaps between the tail roller and the frame. 【Main Specifications】 - Reference transport mass: 5 kg/m (uniformly distributed load) - Belt width: 100–500 mm - Length: 190–330 cm - Tail roller: φ27.2 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

A belt conveyor that is effective for transferring items at right angles or for placement in narrow spaces has been added to the Hood Conveyor series, with a frame width (main body frame) narrower than the belt width. Two types of drive systems are available: a compact drive type and a belt removal type that allows for belt attachment and detachment without tools. 【Main Specifications】 - Reference transport mass: 20 kg/unit - Belt width: 100–500 mm - Length: 100–300 cm - Tail roller: φ27.2 (34) mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

This is a basic two-pulley conveyor from the Hood Beya series, designed for easy cleaning with no contact objects on the belt surface. It features a SUS construction suitable for the food industry. 【Main Specifications】 - Reference transport mass: 36 kg/unit (distributed load) - Belt width: 100–600 mm - Nominal machine length: 60–600 cm - Roller: φ114.3 mm (drive)

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

This is a compact type of 2-pulley conveyor with an easy-to-use simple structure. The small drive pulley allows for smooth transfer of small food items. 【Main Specifications】 - Recommended transport mass: 5 kg/unit (distributed load) - Belt width: 100–600 mm - Nominal length: 60–300 cm - Roller: φ38 mm (drive)

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

A high-performance conveyor that simultaneously achieves short cycle times and high-speed transport. It is expected to play an even greater role in the transportation of food and pharmaceuticals. 【Main Specifications】 - Reference transport mass: 20 kg/unit (distributed load) - Belt width: 100–500 mm - Length: 35–200 cm - Tail roller: φ34 mm

• Conveyor
• Other conveying machines
• Food Conveyor Equipment

It is suitable for transporting slippery and unstable items, as well as bulk items. The standard specifications are a height of 20 mm and a mounting pitch of 300 mm. 【Main Specifications】 - Reference transport mass: 8 kg/unit (distributed load) - Belt width: 100–600 mm - Length: 100–300 cm - Roller: φ89 mm (drive)

• Conveyor
• Other conveying machines
• Food Conveyor Equipment