Kyoritsu Electric Corporation List of Products and Services

The "Unireleaf 2-Tank System" is a continuous water quality monitoring device that can simultaneously monitor two different water systems using two tanks. By monitoring water quality through two tanks of the same water system with the same or different fish species, the reliability of alarms is enhanced. It requires less installation space and is more cost-effective than installing two single-tank systems. 【Features】 ■ Simultaneous monitoring of two different water systems with two tanks ■ Improved alarm reliability ■ Space-saving and cost-effective *For more details, please refer to the catalog or feel free to contact us.

• Other environmental equipment

"Unireleaf" is a continuous water quality monitoring device that measures the bioenergy of fish to monitor water safety. By observing the activity state of fish, it can detect abnormalities related to the presence of dangerous substances, such as toxins, in the water. It monitors water using two indicators: "pre-alarm" and "alarm." 【Features】 ■ Early detection in emergencies is possible ■ Continuous and remote monitoring can be performed ■ The cause of accidents can be investigated ■ Fish are not subjected to stress ■ Monitoring is possible without being affected by the turbidity of the source water *For more details, please refer to the catalog or feel free to contact us.

• Other environmental equipment

Kyōritsu Electric Co., Ltd. provides practical best solutions for the manufacturing industry's production sites, as well as in the fields of research, development, design, and quality control. We offer a range of products including the manual pressure calibration pump "PGM High Pressure Generation Pump," which uses air as the pressure medium, the manual liquid medium high-pressure calibration pump "PGXH Ultra High Pressure Generation Pump" that can be used with various liquids and media, and the manual vacuum type "PGV Negative Pressure Generation Pump." 【Product Lineup】 ■ PGM High Pressure Generation Pump ■ PGXH Ultra High Pressure Generation Pump ■ PGV Negative Pressure Generation Pump *For more details, please feel free to contact us.

• Other pumps

Kyōritsu Electric Co., Ltd. provides practical best solutions for the manufacturing industry's production sites, research, development, design, and quality control fields. We offer an "Environmental Control System" that contributes to labor-saving and productivity improvement in facility horticulture, as well as a "Picking System" for display devices in logistics systems such as distribution centers. 【Functions】 <Environmental Control System> ■ Quantifies environmental parameters such as humidity, temperature, sunlight, and wind direction in greenhouse cultivation based on extensive experience and achievements. ■ Enables automatic cultivation with various sensors and a control computer. <Picking System> ■ Automates sorting to reduce costs in order picking operations. *For more details, please feel free to contact us.

• Instrumentation and Control Systems

The "Alarm Email Distribution System" notifies relevant parties via email when abnormalities or alarms occur on-site. Even when not present at the site during a trouble, it allows for real-time understanding of abnormalities and alarms, enabling swift responses. It reads abnormal and alarm bits from various PLCs on-site through Ethernet communication. Additionally, by monitoring the same PLCs as the existing monitoring system, it can send emails for existing alarms. 【Features】 ■ Email distribution of the content of abnormality and alarm signals that occur on-site to computers and mobile phones ■ Notifications can be sent not only for the occurrence of abnormalities but also for recovery ■ Settings for holidays and email distribution time slots can be configured ■ Quick email notifications through constant monitoring of alarms ■ Flexible response to the addition of PLCs or alarm points *For more details, please refer to the PDF document or feel free to contact us.

• Email/Fax transmission

The "Trend Analysis System for Manufacturing" is a product that supports data analysis in manufacturing environments. It allows for the periodic collection of data from equipment and machinery in the manufacturing site. Additionally, by outputting trend graphs and statistical values of interval data based on the collected data, it helps customers analyze patterns and trends contained in the data. 【Features】 ■ Data from equipment and machinery can be collected at intervals of up to 10 seconds ■ It is also possible to build the system using existing accumulated data from existing systems ■ Users can input manufacturing conditions to filter the displayed data ■ Data collected from different equipment can be displayed on the same trend *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems

The "Equipment Inspection Record System" is a system that supports daily equipment inspections and monthly meter readings. By switching from paper-based operations to the use of tablet devices, we achieve improved operational efficiency. Inspection items are extracted from the Excel-based inspection sheet format created by the customer. For inspection tasks, only the tablet device needs to be brought; there is no need to carry inspection papers. 【Features】 ■ Extracts inspection items from the Excel-based inspection sheet format created by the customer ■ Only the tablet device needs to be brought for inspection tasks; no need to carry inspection papers ■ Simple operation via touch controls ■ Automatically creates inspection sheets based on inspection results ■ Data transfer via network using wireless LAN and other means is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

The system allows for handwritten input of product information (such as inspection results and quality information) on-site in the manufacturing area using devices like tablet PCs. The entered product information can be accessed from computers in the manufacturing area or office, enabling an understanding of the "live" situation on the ground. For example, in the production area, the quality information of products flowing in front of you can be confirmed in real-time, allowing for prompt implementation of improvement measures (such as preventing the outflow of defective products). 【Features】 - Reduction of business costs through centralized management of product information via digitization, eliminating the need for paper-based management. - Intuitive input through easy handwritten illustrations and text. - By using tablet PCs, product information can be registered and accessed anytime and anywhere. - Accumulated data from the past can be searched and aggregated from various angles, facilitating analysis. *For more details, please refer to the PDF materials or feel free to contact us.

• Other production management systems

This system is designed to centrally manage product information and assembly work information (work performance, inspection results) on the assembly production line. By recording and managing product information and assembly work information in real-time, it allows for extraction and inquiry from various perspectives such as product and part serial numbers, assembly dates, etc. Additionally, by visualizing assembly work information, it enables rapid response in the event of product issues. 【Features】 ■ Real-time accumulation of product information and assembly work information ■ Inquiry of centrally managed information from various perspectives ■ Ability to receive production instructions from higher-level systems, such as production management, via file ■ Ability to receive performance data from lower-level systems, such as inspection devices, via file *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

This system automatically conducts tests by controlling the equipment based on test conditions for air conditioner performance evaluation test facilities. By registering test settings in advance and allowing tests to be conducted with the push of a button, the system simplifies operations, thereby reducing the burden on operators. It is possible to use multiple test rooms in any combination, which increases the efficiency of test operations. Additionally, by reusing test data, the system achieves stable testing and aims to improve test quality. 【Features】 ■ Reduces the burden on operators ■ Allows the use of multiple test rooms in any combination ■ Achieves stable testing by reusing test data ■ Can print test results as reports ■ By using the offline function, it is also possible to refer to past test records *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

The "Weighing Management System" improves work efficiency through simple operations using a touch panel and QR reader during raw material acceptance and weighing processes. By checking the displayed weighing brands and weights through order management, as well as monitoring expiration dates through raw material management, it is possible to eliminate operator mistakes. Administrators can confirm weighing progress and results in real-time without having to visit the site, thereby reducing their workload. 【Features】 ■ By setting authority for each work unit, it is possible to impose work restrictions on operators. ■ It is possible to import order files from a higher-level system and expand them into weighing orders. ■ By re-importing modified order files, changes to orders can be made. ■ If an order is changed, automatic notifications are sent to the on-site terminals currently weighing. ■ It is possible to check the batch numbers for each product/raw material specified in the order. *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

The "Brand Management System" is a system that automates the manufacturing process by managing and controlling the amount of raw materials and manufacturing conditions for producing paper on a per-brand basis, and setting this information as formulation data in the control controller unit. By managing manufacturing conditions with a dedicated computer system, it significantly reduces input time and setting errors, thereby supporting customer production. It supports redundancy for the database and OPC server, and if the master side cannot connect to the HIS, it operates by connecting to the HIS on the sub side. 【Features】 ■ Registered brands can be viewed on the screen in a list format. ■ New registration, modification, and deletion of manufacturing conditions (management data) for each brand can be performed. ■ New brands can be easily created based on existing brands. ■ With the GUI, items in the "list selection" can be added, modified, or deleted. *For more details, please refer to the PDF document or feel free to contact us.

• Other production management systems

The "COA Issuance System" reduces the workload of COA issuance tasks by accommodating various formats requested by customers. By automatically extracting the necessary data for COA issuance from quality inspection data and quality inspection standards, it prevents transcription errors during COA creation. Additionally, the output formats support Excel/XML formats. By setting up addresses, it is also possible to send COAs via email. 【Features】 ■ Supports different file types and items for each customer ■ In the delivery process, you can choose between email sending or printing ■ By separating the creator and approver, double-checking is possible ■ Allows changes to file types and items for customers *For more details, please refer to the PDF materials or feel free to contact us.

• Other production management systems

The issue of global warming, along with the revision of energy conservation laws and the acquisition of ISO environmental management certification, makes corporate efforts toward energy conservation extremely important and a significant challenge in management. The "Demand Monitoring System" can utilize the equipment data from production sites, which changes constantly, by monitoring it as a demand graph, thereby contributing to energy-saving measures, cost reduction, and the reduction of greenhouse gas emissions in factories. 【Features】 < Demand Monitoring Function > ■ Displays the demand graph of equipment data from the production site in real-time every 60 minutes ■ Predicts the demand value 60 minutes later based on the current demand value ■ The graph can be displayed in any format, either as a line graph or a bar graph ■ In addition to graph displays, important equipment data can also be shown as numerical values on the screen *For more details, please refer to the PDF materials or feel free to contact us.

• Instrumentation and Control Systems

Kyōritsu Electric Co., Ltd. provides practical best solutions for manufacturing production sites, research, development, design, and quality control fields. We offer a range of systems including the "Semiconductor Production Management System," which manages semiconductor manufacturing and promotes visibility on the production floor, as well as the "Demand Monitoring System" and "Real-Time Trend System." 【Product Lineup】 ■ Semiconductor Production Management System ■ Demand Monitoring System ■ Easy Data Viewer ■ Easy Data Report ■ COA Issuance System, etc. *Please feel free to contact us for more details.

• Instrumentation and Control Systems

The "LabVIEW Dielectric Strength and Power Consumption Testing Device" is a device that conducts dielectric strength tests and power consumption tests for electric actuators, allowing for product evaluation. To accommodate a variety of workpieces, settings for dielectric strength voltage values and applied voltage for power tests, as well as threshold settings for measurement values, can be pre-saved for each model. Additionally, inspection results are displayed on a computer screen and saved on the computer in CSV format. 【Benefits of Implementation】 ■ Improvement of Work Efficiency - Automatic testing and data saving can be performed with just the push of a button. ■ Safe Operation - An area sensor is installed to ensure safety by preventing contact during dielectric strength testing. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "LabVIEW Simulation Load Testing System" is a testing system based on JIS C 8851. It allows for the control of loads while obtaining experimental data based on the average daily power load testing patterns of a standard household and the average hot water heating load patterns. Furthermore, the ability to create flexible operating patterns enables various load tests. 【Effects】 <Improvement of Operational Efficiency> ■ Automatic operation function with patterns compliant with JIS allows for efficient testing operations of equipment. <Load Reduction> ■ The ability to create flexible operating patterns enables various load tests. ■ Various interlock functions allow for safe unmanned testing. *For more details, please refer to the PDF materials or feel free to contact us.

• Testing Equipment and Devices

"LabVIEW" is measurement and control system development software sold by National Instruments Corporation, Japan. We provide comprehensive systems including hardware, from various measurement systems using this product to jigs and test benches. 【Features】 ■ Automation of systems ■ Consolidation of inspection processes ■ Capability for long-duration testing *For more details, please feel free to contact us.

• Instrumentation and Control Systems

HYPER EOCS is a control system that has enhanced the functionality of our "EOCS" product by establishing a new "development support package," enabling us to meet higher demands and reduce development man-hours. It features high functionality for continuous control instruments and indicators, supporting a standard of 64 loops. It improves I/O implementation efficiency and comes standard with a historical display function for real-time trend displays. 【Features】 ■ High functionality for continuous control instruments and indicators, supporting a standard of 64 loops ■ Standard support for 4 EOP connections ■ Capability to save field information on CF cards ■ Standard "zone control function" and "high-speed input processing" ■ Compatible with a PC-based tool for bulk management of PID operating parameters *Please feel free to contact us for more details.

• Instrumentation and Control Systems

EOCS-LOG is an instrumentation system that improves efficiency by reducing development time without programming and minimizing wiring and space, while achieving scalability and easy networking. It comes standard with 32 analog indicating alarm instruments and can manage up to 60 analog points. The controller function supports sequence control. This product offers the excellent features of our "EOCS" (Iosis) at a lower price. 【Features】 - Introduction of a lower-cost system by adopting a display with controller functionality - Adoption of I/O unit networks for reduced wiring and space - Program-less data monitoring and collection by packaging software - Easy connection to upper-level PCs - Remote data monitoring and collection *For more details, please feel free to contact us.

• Instrumentation and Control Systems

The "EOCS" is a PLC instrumentation that can manage complex loop controls such as PID control and cascade control for up to 32 instruments. The software for control and monitoring has been packaged, significantly shortening the development period. It flexibly accommodates communication with higher-level systems. Additionally, users can easily engineer the system construction. This product can achieve functionalities that were previously only possible with large DCS systems at a low cost, and it can easily accommodate scalability and networking. 【Features】 ■ Manages complex loop controls such as PID control and cascade control for up to 32 instruments ■ The instrument list screen (group display) standardly shows 6 instruments on one screen ■ Functions for operational management, such as simple reports, recipe management, and trend display, can be easily realized in the package ■ When connecting two or more EOPs, separate instrument operations are possible (MMI redundancy) ■ There are many screen options beyond the package *For more details, please feel free to contact us.

• Instrumentation and Control Systems

The latest version of iFIX2024 now supports Japanese. By using iFIX, a SCADA system from GE Vernova, you can build a remote monitoring environment via the internet with minimal effort, from visualizing production lines. The automated configuration feature eliminates the hassle of connecting various devices and setting up software. With its rich extension capabilities, it enables system redundancy, compliance with 21 CFR Part 11 (electronic records and electronic signatures), centralized management of factories nationwide, and monitoring of various sensors using information obtained from PLCs, thereby reducing unexpected downtime. It achieves excellent connectivity using an OPC-UA server and OPC-UA client (optional). By subscribing to the Acceleration Plan (GE annual maintenance contract), you can support monitoring and optimization of production lines using the latest software without worrying about sudden expenses. *This product information also introduces our unique remote monitoring system catalog as a related product to the Japanese version of iFIX 2024 *Kyouritsu Electric is an authorized distributor of the Proficy Family (iFIX). We support everything from package sales to system construction.

• Integrated operation management

In the Solution Catalog Vol. 7 [Energy Saving and Environment Edition], we will introduce solution examples that leverage Kyokuritsu Electric's technical capabilities and purchasing power in the IIoT field, which they excel in. Please check out the best proposal examples that can only be provided by Kyokuritsu Electric, which offers solutions under the concept of One Stop Shopping.

• Other production management systems

In Solution Catalog Vol. 6 [Monitoring Edition], we will introduce solution examples that leverage Kyokuritsu Electric's technical expertise and purchasing capabilities in the IIoT field, which they excel in. Please check out the best proposal examples that can only be offered by Kyokuritsu Electric, which provides solutions under the banner of One Stop Shopping.

• Other security

In Solution Catalog Vol. 5 [Measurement & Testing Edition], we will introduce solution examples that leverage the technical capabilities and purchasing power of Kyoryu Electric in the IIoT field, which they excel in. Please check out the best proposal examples that can only be provided by Kyoryu Electric, which offers solutions under the banner of One Stop Shopping.

• Other measurement, recording and measuring instruments

In Solution Catalog Vol. 4 [Equipment Maintenance Edition], we will introduce solution examples that leverage Kyokuritsu Electric's technical expertise and purchasing capabilities in the IIoT field, which they excel in. Please check out the best proposal examples that can only be provided by Kyokuritsu Electric, which offers solutions under the banner of One Stop Shopping.

• Other production management systems

In the Solution Catalog Vol. 3 [Quality Management Edition], we will introduce solution examples that leverage the technical capabilities and purchasing power of Kyoritsu Electric in the IIoT field, which they excel in. Please check out the best proposal examples that can only be provided by Kyoritsu Electric, which offers solutions under the concept of One Stop Shopping.

• Integrated operation management

In Solution Catalog Vol. 2 [PIMS & Inventory Management Edition], we will introduce solution examples that leverage Kyoritsu Electric's expertise in the IIoT field and purchasing capabilities. Please check out the best proposal examples that can only be provided by Kyoritsu Electric, which offers solutions under the banner of One Stop Shopping.

• Integrated operation management

In the Solution Catalog Vol. 1 [Manufacturing Management Edition], we will introduce solution examples that leverage Kyoryu Electric's technical expertise and purchasing capabilities in the IIoT field, which they excel in. Please check the best proposal examples that can only be provided by Kyoryu Electric, which offers solutions under the banner of One Stop Shopping.

• Integrated operation management

By using iFIX, a SCADA system from GE Vernova, it is possible to build a remote monitoring environment over the internet with minimal effort, from visualizing the production line. The automated configuration feature eliminates the hassle of connecting various devices and setting up between software. With its rich extension capabilities, it enables system redundancy, compliance with 21 CFR Part 11 (electronic records and electronic signatures), centralized management of factories nationwide, and monitoring of various sensors using information obtained from PLCs, thereby reducing unexpected downtime. If you subscribe to the Acceleration Plan (GE annual maintenance contract), you can support monitoring and optimization of the production line using the latest software without worrying about sudden expenses. This catalog presents a digest version, showcasing six of the most standard software from the GE Vernova SCADA Proficy Family. If you are considering further expandability, we have separate data sheets for related products available. Additionally, if you require system construction or custom support, we can assist you.

• Other production management systems

Kyōritsu Electric Co., Ltd. provides practical best solutions in manufacturing production sites, research, development, design, and quality control fields. The "12ch PWM Module" can be used for brightness control of LED lighting and fluorescent lamps, contributing to energy savings in large retail stores, factories, and offices. [Features] - Contributes to energy savings - Constant ON control during failures for peace of mind - Customizable specifications at low cost and short delivery times *Please feel free to contact us for more details.

• Other process controls

"JoyMailer" is software that regularly monitors the alarm logs of JoyWatcherServer and automatically sends emails when an alarm occurs. It delivers one alarm per email sent. If an error occurs during email transmission, it will resend the email in the next cycle. 【Features】 ■ If an error occurs during email transmission, it will be resent in the next cycle. ■ You can configure the item names and order to be sent via email from the settings screen. ■ It is possible to keep a history of sent emails based on settings. ■ You can also create one file of sent history per day. ■ The sent history files can be automatically deleted by setting the retention period and deletion time. *For more details, please feel free to contact us.

• Server monitoring and network management tools