SHINNETSU.Co,.Ltd. Product Lineup

The gas heater "Clean Hot" achieves a reduction in the surface temperature of the outer pipe without the use of insulation materials, thanks to its special internal structure. It can be used in environments such as clean rooms since insulation materials are not required. You can choose from six different models according to the heater capacity (W). It supports gas heating from 50 to 1000 NL/min (refer to each model). In manufacturing settings, it can be used for a variety of applications such as: - High-temperature heating of inert gases like air and nitrogen gas - Removal of moisture after wet cleaning - Inert gas heating in the thermal processing of semiconductor and LCD panel substrates This compact and low-cost electric heater is versatile and suitable for a wide range of uses. 【Features】 - High heating efficiency due to the use of special heaters and structures - Quickly heats the target gas cleanly and allows for precise temperature control - The outlet gas temperature can be set up to a maximum of 500°C (varies depending on usage conditions) *For more details, please download the materials or feel free to contact us.

This is an electric heater that enables gas heating at an extremely low flow rate (around 10 L/min), which is difficult to achieve with conventional heaters. It is a heater realized through our company's seed heater manufacturing technology, and it is very compact and can be directly connected to piping. Additionally, the gas contact part is made of stainless steel, allowing for clean gas heating. 【Features】 - Capable of heating gas at low flow rates (around 10 L/min). - Capable of temperature increases from room temperature to about 350°C. - Available in two types: VCR fitting specification and pipe end specification. For more details, please refer to the PDF document or feel free to contact us.

The "Gas Heater / Clean Hot Mini" is an electric heater that achieves high heating efficiency and precise temperature control of the heated gas due to the adoption of a special thin-diameter heater and unique structure. Unlike the conventional "Clean Hot," the heater and gas flow path are isolated, allowing the target gas to be heated cleanly without coming into contact with the heater surface. It supports gas heating from 0.2 to 100 NL/min. (Please refer to the catalog for the corresponding temperatures.) The internal special structure allows for a reduction in the outer surface temperature without the use of insulation materials. Since insulation is not required, it can be used in environments such as clean rooms. 【Features】 ■ The surface temperature of the main unit can be kept low, eliminating the need for insulation materials. ■ The heater and gas flow path are isolated, allowing the target gas to be heated cleanly without touching the heater surface. ■ Compact size, weighing 350g and fitting in the palm of your hand. ■ High efficiency is achieved through a special structure. (Over 80% efficiency at flow rates of 10 L/min or more) For more details, please download the materials or contact us.

We would like to introduce a case that Shin-Net Industrial has resolved. Our customer requested a gas heater that does not use insulation materials, which can cause dust and dirt, for use in a clean room within their factory. The issue is that without insulation materials, heat escapes, leading to inefficiency. In response, we developed a gas heater that cleverly manages the gas flow to prevent the exterior temperature from rising. 【Case Study】 ■Issues - Without insulation materials, heat escapes, resulting in inefficiency. - The exterior can become excessively hot, posing a risk of burns. ■Solution - Developed a gas heater that manages gas flow to prevent the exterior temperature from rising. - The heater inside the container is designed with complex bends. *For more details, please refer to the PDF document or feel free to contact us.

Here is a case study solved by Shin-Net Industrial. We received a request to use our "Clean Hot" product, but due to limited installation space, the customer wanted a product that could be half the length, even if the diameter was larger. Simply increasing the bending diameter of the heater would reduce the flow rate and pose a risk of overheating, so it was necessary to devise a solution for the gas flow. Based on the data from when we developed the same product, we worked on increasing the gas flow radially and creating a heater with equivalent performance. [Case Study <Solution>] - Based on the data from when we developed Clean Hot, we increased the gas flow radially and worked on creating a heater with equivalent performance. - The dimensions of the gas flow path were determined to ensure the flow rate remained the same. *For more details, please refer to the PDF document or feel free to contact us.

Here is a case study solved by Shin-Net Industrial. We received a request to raise a small gas flow of 0.1L/min to 10L/min up to 350℃. The standard products we offer are designed for several hundred L/min, so they are too small for the required flow rate. Unlike water, gas does not transfer heat easily, so we thought the key was to increase the flow velocity and enlarge the heater's contact area. Therefore, we ensured sufficient flow velocity by narrowing the gas flow pipe. We selected our 1.8 ultra-thin heater and tightly wound it around the gas flow pipe to secure the contact area. [Case Study <Solution>] - Increase flow velocity and enlarge the heater's contact area - Ensure sufficient flow velocity by narrowing the gas flow pipe - Select the 1.8 ultra-thin heater and tightly wind it around the gas flow pipe to secure the contact area *For more details, please refer to the PDF document or feel free to contact us.

The case study collection is a document that summarizes examples of projects we have actually produced in the past. We, Shinnetsu Kogyo, are a manufacturer engaged in industrial heaters and machinery equipped with heater components. We deliver customized products for each customer, handling everything from design to manufacturing and sales in-house. Our clients span various industries and fields, including semiconductors, organic EL, LCD, aerospace, food, kitchen, electronic components, precision instruments, electrical equipment, chemicals, environment, medical, automotive, heavy electrical, and physical and chemical instruments, both domestically and internationally. *For more details, please refer to the PDF document or feel free to contact us via our website.

Compared to a typical shell-type heater (which has linear sheath heaters arranged inside the container), the length is reduced to about half. Our technology for bending sheath heaters in complex shapes has achieved compactness. It is an inline type that can be directly connected to existing piping. Additionally, the gas connection part is made of stainless steel, allowing for clean gas heating.

Introducing the custom specifications of the gas heater "Clean Hot" (CLH series). The custom specification CLH-1.5 is a gas heater that supports an outlet temperature of 400°C at a flow rate of 40L/min, which could not be covered by the standard specifications of Clean Hot. While it looks similar to the standard specifications CLH-0.6 and CLH-0.9, the internal structure has been modified to achieve an outlet temperature of 400°C. For information on the flow rates and outlet temperature ranges that can be accommodated, please check our website → Product Information → Clean Hot page. https://www.shinnetsu.co.jp/products/product02/