TSP List of Products and Services

The "Energy Saving and CO2 Reduction Total Solution Catalog (vol 7.7)" features a wide range of products and services aimed at reducing expenses and achieving decarbonization from the perspective of energy saving and CO2 reduction. We offer a broad array of solutions, including "LED lighting" that contributes to reducing electricity costs and CO2 emissions, as well as "roof and window heat insulation sheets," "power reduction units," "high-performance heat insulation sheets," "floating oil recovery devices," and "water-saving nozzles." *For more details, please refer to the catalog or feel free to contact us.*

★Injecting free electrons into the power line 　　　↓ 　Inducing a smooth flow of current by reducing internal resistance 　　　↓ 　Power reduction unit that decreases power consumption and CO2 emissions ★Removable & re-installable ★Widely used for energy saving in facilities that consume large amounts of power, such as manufacturing plants and rooftop radio towers/buildings ★Please provide one year of electricity bills and meter reading data from your utility company. 　We will propose the appropriate ecomo capacity and investment recovery simulation. ★Proven track record of 2,200 sets domestically and internationally *For more details, please contact us below*

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and reduce power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★This is a groundbreaking energy-saving and power-saving unit unlike any other.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water. The bubbles effectively hit the items being cleaned, removing dirt and providing high cleaning power even with about one-tenth of the water volume used traditionally. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention feature ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

Air conditioning systems are said to account for about 40% of electricity usage in offices, stores, commercial facilities, and other establishments. The device that achieves energy savings is the 'α-HT'. The 'α-HT' reduces the load on the compressor by stirring the refrigerant and refrigerating oil to dissolve it, thereby shortening the time it takes to reach the set temperature for both heating and cooling, which lowers the power consumption of the air conditioning system. It can be installed simply by inserting it into the piping of the air conditioning system. It is compatible not only with commercial air conditioners but also with gas heat pumps. It requires no water or electricity, resulting in no running costs, and since there are no consumables or replacement parts needed, maintenance is also unnecessary. 【Features】 ■ Can be installed with standard air conditioning work (for commercial air conditioners of 10 kW or more) ■ Simply insert into the piping ■ No running costs ■ No maintenance required *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof, which can suppress radiative cooling, also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and protects roofing materials. ★ There is a 5-year performance guarantee, with annual inspections conducted within this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

Chilcoat, the only solar reflective paint of its kind in Japan, offers a variety of heat-reflective paints for various applications. ▮ HSG / Colorless high transparency heat-reflective paint ▮ HSP / High diffuse reflection non-hollow thin film heat-reflective water-based paint ▮ RC / Red rust conversion one-component room temperature crosslinking anti-corrosion water-based paint ▮ RS / Metal oxidation prevention anti-corrosion inorganic paint ▮ WIP / Woodworking inorganic paint ▮ LFP / Phosphorescent fluorescent water-based paint This is a comprehensive document on these paints.

It is said that the time until electricity is restored during a disaster is about 48 hours. The HUG-400 ensures power for those 48 hours. Equipped with 12 USB output ports and 2 AC output sockets, it can charge multiple devices at once. It can charge up to 60 smartphones at a time (for smartphones at 5W, please refrain from prolonged use). It is compact, lightweight, and has an excellent design, making it perfect for portability. It can also be charged from an AC power source or a solar panel (sold separately as an option), and it is easy to use. It can be used with various electronic devices such as smartphones, tablets, laptops, and LCD TVs, alleviating concerns during emergencies. ■ Smartphones: Approximately 60 charges possible ■ Television: Approximately 5 hours of use possible ■ LED Bulbs: Approximately 100 hours of use possible ■ Laptops: Approximately 20 charges possible Size: W233×D148×H284 (mm) Weight: 5.3 kg Input Voltage: AC100–240V (adapter) / Solar Panel Operating Temperature Range: 0–40℃

▮ It can be easily attached to the window frame sash. Just cut it to the size of the window and stick it on with the included double-sided tape. ▮ It has a high heat insulation effect, helping to moderate the indoor temperature. ▮ Perfect for energy-saving measures. ▮ It also provides privacy protection. ▮ Available in two sizes: M (150mm x 95mm) and L (210mm x 95mm). ▮ Colors available are white, silver, and ivy pattern.

Features of Chircote HSG-HO1 7 2 - It enables measures against indoor heatstroke and energy conservation, as well as CO2 reduction. - It cuts over 85% of infrared wavelength transmission on average, reducing indoor temperature rise. - It cuts over 99% of ultraviolet wavelength transmission on average, preventing indoor fading and deterioration. - It does not cut visible light, so it does not affect indoor brightness. - The coating is colorless and highly transparent, without distortion or cloudiness, and does not alter the outdoor view. - In winter, it helps retain indoor heat and suppresses condensation. - The coating has high hardness, excellent scratch resistance and chemical resistance, with a weathering lifespan of about 10 years, making it economically advantageous. - It can be applied to challenging three-dimensional curved surfaces that are difficult for heat-shielding films. Features HSG allows for colorless, highly transparent heat-shielding coatings on three-dimensional curved surfaces and patterned glass that could not be applied with "heat-shielding films," as well as on acrylic and polycarbonate. Additionally, it can be applied seamlessly on large surfaces, primarily from the indoor side, but can also be applied from the outdoor side depending on the conditions.

"Ree Roof" is a heat insulation and thermal insulation system for metal standing seam roofs that utilizes the effect of "shade." It employs polyethylene resin sheets. By covering approximately 80% of the standing seam roof, various benefits can be achieved. Additionally, it can be installed on two types of roofs: the standing seam type commonly found in large warehouses and factories, and the overlapping type seen in smaller stores. For other types of roofs, such as snap-lock, please contact us. 【Features】 ■ Low cost ■ Short installation time ■ Zero maintenance cost ■ Sustained effectiveness ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

We present six solutions to effectively and cost-efficiently prevent contact and droplet infections. To reduce stress in adapting to new lifestyles and to live daily life with peace of mind, please refer to this information. 【Contents】 ■ Antiviral Film [VIRtech Film] *Proven effective against coronavirus ■ Deep Ultraviolet LED Irradiation Device [Versus] ■ CO2 Sensor ■ Retrofit Automatic Toilet Flush ■ Invisible Gloves [Beltact] *For more details, please refer to the catalog or feel free to contact us.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the surfaces being cleaned, removing dirt while achieving high cleaning power with about one-tenth the amount of water used traditionally. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free adaptation to the anticipated continuous rise in water rates. [Features] ■ High cleaning and water-saving effectiveness ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and reduce power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not negatively affect the cubicle, allowing you to use it with peace of mind. ★This is a groundbreaking energy-saving unit unlike any other. It is a new energy-saving solution that strongly supports the decarbonization efforts of various factories and plants.

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reducing internal resistance, promoting the flow of current, and decreasing power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in overall power consumption and CO2 emissions from the distribution board can be achieved. ★If a reduction effect of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not negatively impact the cubicle, allowing you to use it with peace of mind. ★It is a groundbreaking energy-saving and power-saving unit unlike any other. This is a new solution that strongly supports the decarbonization efforts of various factories and plants.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. On page 5 of this case study collection, the following case is presented: CASE 3: Manufacturing Plant - Comparison of Heat Shielding Products ☆ This is a case where the Cool Roof was adopted as a result of a comprehensive evaluation of three construction methods. ☆ 【Features】 ★ It blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the constructed area and the non-constructed area of the single standing seam roof (demonstration measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof, which can suppress radiative cooling, also helps reduce condensation. ★ Secondary effects: noise reduction and roof material protection. ★ 5-year performance warranty with free annual inspections. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

"ecomo" is an energy-saving unit that supplements electrons to the load system, reduces electrical resistance, and improves the flow of current. Since it operates without power, it achieves zero power consumption. It can be used for over 20 years without the need for replacement of parts or materials. This document includes the flow of implementation, the mechanism of energy saving, examples of energy measurement and analysis, and more. You can verify the evidence of this product through practical examples. Please take a moment to read it. [Contents] ■ Flow of implementation (in the initial phase of implementation) ■ Mechanism of energy saving ■ Installation recommendations ■ Understanding the energy-saving principles of ecomo ■ Examples of ecomo energy measurement and analysis ■ ecomo case studies *For more details, please refer to the PDF document or feel free to contact us.

★An original recovery device that contributes to the environment with fluid transfer technology and boasts numerous awards. ★We offer an excellent range of recovery devices for collecting oil and floating debris across a wide variety of sites, from factories and kitchens to oceans and rivers. 【Lineup】 ■Standard Specification Type 　　Double float structure: Flexibly follows the up-and-down swaying of the skimmer and fluctuations in liquid level caused by wave variations and air mixing. 　　Specially molded main float shape: By supplementing the shape of the submerged part, the gap at the oil-water inflow section has been widened. ■Special Specification Type 　　Heavy-duty type: Optimized for recovering oil mixed with slurry. 　　High-viscosity type: For recovering high-viscosity floating oil and solid floating debris (scum). 　　Compact type: Usable in narrow spaces such as manholes. 　　Large type: For recovering and transferring floating oil in deep pits where self-priming is not possible.

★We would like to introduce a unit that can be installed inside a cubicle and connected to wires with crimp terminals, which is expected to have a significant effect for those considering various measures to reduce power consumption and CO2 emissions, and wondering if there is anything more that can be done. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reducing internal resistance, promoting the flow of current, thereby reducing power consumption and CO2 emissions. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★By reducing the overall power consumption of the cubicle by more than 5%, it also contributes to a reduction in CO2 emissions, making a significant contribution to the SDGs. ★If a power reduction effect of more than 5% is not recognized, we will remove the unit upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★It is a groundbreaking SDGs contribution unit that is unlike any other. ★Over 2,200 sets have already been installed domestically.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows nearly a 30°C temperature difference between the installed area and the non-installed area (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance warranty, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and reduce power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction effect of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not negatively affect the distribution board, allowing you to use it with peace of mind. ★This is a groundbreaking energy-saving and power-saving unit unlike any other.

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and decrease power consumption. ★The ferrite (iron oxide) component also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction effect of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not negatively impact the distribution board, allowing you to use it with peace of mind. ★It is a groundbreaking energy-saving and power-saving unit unlike any other. This is a new power-saving solution that strongly supports the decarbonization efforts of various factories and plants.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ Additionally, it provides noise reduction and roof material protection effects. ★ It comes with a 5-year performance guarantee, with annual inspections conducted during this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

◇ Practical application of the flexible thermoelectric power generation module "Flekina"! ◇ Existing BiTe-based thermoelectric elements with proven performance are mounted on ultra-thin flexible substrates using mature semiconductor technology for high-speed, high-density implementation → Cost reduction ◇ The flexible module structure allows for easy curvature and good adhesion to cylindrical heat sources, enabling high thermal recovery efficiency → Enhanced performance ◇ Provides compact and high-output autonomous power sources for IoT ◇ Available in pipe-wrapping type, flat type, and finless type ◇ Output of over 1mW with a temperature difference of 15-35°C or more between the heat source and ambient temperature, making it suitable for various IoT sensor power supplies ◇ Explosion-proof options are also available (certification application in progress) * For details, please download the PDF or contact us directly.

This document introduces a self-sustaining power source using our proprietary waste heat power generation technology. We have commercialized an ultra-thin and flexible thermoelectric power generation module called "Flekina," which can accommodate various low-temperature waste heat sources (around 300°C or lower)! The document includes numerous development examples of self-sustaining power supply systems for IoT and energy-saving applications equipped with "Flekina." Additionally, it features comparisons with other technologies and application examples, making it a useful reference for those considering implementation. We encourage you to read it. [Contents (partial)] - Efficiently converting and recovering the vast amounts of low-temperature waste heat (around 300°C or lower) present on Earth into electrical energy - Introduction of our unique proprietary technology - Development examples featuring the ultra-thin and flexible thermoelectric power generation module "Flekina" *For more details, please refer to the PDF document or feel free to contact us.

The air in conference rooms and laboratory environments can become polluted without us realizing it, leading to an increase in CO2 levels. According to data released by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), when indoor CO2 concentration reaches 1,000 ppm, people begin to feel drowsy, and at 2,500 ppm, adverse health effects are expected. Additionally, in laboratory environments such as factories, various challenges arise due to negative pressure caused by experimental equipment. "ecowin AIR" aims to resolve these issues.

★Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. ★In general, FRP water tanks are prone to algae growth and bacterial proliferation due to photosynthesis. ★Tank Sten Coat PS500 solves all these issues. By simply adopting Tank Sten Coat PS500 for existing FRP tanks, they can be transformed into completely new tanks. ★It comes with a 10-year warranty with responsible construction. ★By extending the service life, it reduces the generation of industrial waste and is an environmentally friendly method for the 21st century.

★ Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. Additionally, FRP water tanks are generally prone to algae growth and bacterial proliferation due to photosynthesis. ★ Tank Sten Coat PS500 solves all these problems. By simply applying Tank Sten Coat PS500 to existing FRP tanks, they can be transformed into entirely new tanks. ★ It comes with a 10-year warranty for complete installation. ★ By extending the service life, this 21st-century construction method helps reduce the generation of industrial waste and is environmentally friendly.

Utilizing the thin and flexible structure of "FrekinaⓇ", we achieve high thermal recovery from cylindrical and flat heat sources. We provide compact and high-output autonomous power supplies for IoT applications. ◇ Pipe-wrapped type / Flat type / Finless type ◇ Output of over 1 mW with a temperature difference of 15-35℃ or more between the heat source and the surrounding environment, ideal for various IoT sensor power supplies ◇ Explosion-proof options are also available (certification application in progress)

❖ Ideal for pits approximately 4m x 5m in size ❖ Flexibly follows waves and liquid surface fluctuations, continuously sucking and recovering surface oil, water, and floating debris ❖ Unique gate structure allows the inlet to swing, efficiently recovering high-viscosity oil and solids (scum) (SWPN type is a non-swinging type) ❖ Equipped with an underwater pump, enabling both recovery and transfer with this single unit ❖ By reducing the number of floats compared to conventional products, the flow space has been expanded, achieving smooth recovery ❖ The frame supporting the floats is arched, making it easy to carry ❖ The frame is made of SUS304, which has excellent corrosion resistance

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy saving and environmental improvement throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day (using the standing seam method).

"Cool Roof" is a heat insulation and thermal insulation system specifically designed for metal standing seam roofs, utilizing the effect of "shade." It employs polyethylene-based resin sheets and covers approximately 80% of the standing seam roof. ★ For summer heat insulation and heatstroke prevention, and winter heat retention and condensation measures ★ Energy savings through improved air conditioning efficiency ★ Reduction of noise from roofing materials and rain sounds ★ Protection of roofing materials It demonstrates effectiveness. Compatible metal standing seam roof types: - Haze-type commonly found in large warehouses and factories - Overlapping type seen in small stores and similar establishments For other types such as fitting types, please contact us. *For more details, please refer to the PDF document or feel free to contact us.

Air conditioning units are said to account for about 40% of electricity usage in offices, stores, commercial facilities, and other establishments. The device that achieves energy savings is the 'α-HT'. The 'α-HT' reduces the load on the compressor by stirring the refrigerant and refrigerating oil to dissolve them, thereby shortening the time it takes to reach the set temperature for both heating and cooling, which reduces the power consumption of the air conditioning unit. It can be installed simply by inserting it into the piping of the air conditioning unit. It is compatible not only with commercial air conditioners but also with gas heat pumps. It does not require water or electricity, resulting in no running costs, and since there are no consumables or replacement parts needed, maintenance is also unnecessary. 【Features】 ■ Can be installed with standard air conditioning work (for commercial air conditioners of 10 kW or more) ■ Simply insert it into the piping ■ No running costs ■ No maintenance required *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

★ Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. Additionally, FRP water tanks are generally prone to algae growth and bacterial proliferation due to photosynthesis. ★ Tank Sten Coat PS500 solves all these challenges. By applying Tank Sten Coat PS500 to existing FRP tanks, they can be transformed into entirely new tanks. ★ This 21st-century construction method extends the service life, reduces the generation of industrial waste, and is environmentally friendly.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the items being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth of the water volume used traditionally. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. [Features] ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

Automatic faucets allow you to turn the water on and off without touching levers or handles, making handwashing more hygienic.

"Bubble90" is a revolutionary water-saving device that is completely different in dimension from conventional water-saving cartridges and nozzles, featuring compatibility with hard and soft water and maintenance-free functionality. It converts water into bubbles inside the nozzle and continuously releases these bubbles while varying the amount of water released. The bubbles effectively hit the surfaces being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth the amount of water used traditionally. Additionally, it is equipped with a water pressure and flow adjustment feature that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment functionality ■ Maintenance-free with clog prevention features ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ The Cool Roof uses sheets made of polyethylene-based resin. ★ It blocks sunlight with the sheets, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheets and the roof prevents heat transfer. ★ Air flows through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single corrugated roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

1. Energy Saving and CO2 Emission Reduction ◆ New concept power reduction unit "ecomo" ◆ High-performance heat insulation sheet "Netsu Mamore" ◆ Air conditioning outdoor unit energy-saving system "ESCO-ONE" ◆ Air conditioning refrigerant stirring device "α-HT" ◆ Heat insulation sheet for metal standing seam roofs "Hie Roof" ◆ Self-generating power system utilizing waste heat "Furekina" ◆ New structure heat insulation paint "Chilcoat" ◆ High-spec window solar control film "iQUE" ◆ Large-scale surface floating debris/oil recovery pump "Gyro Skimmer" ◆ Floating oil recovery device "Eco It" ◆ Ultra water-saving nozzle "Bubble90" 2. Heat Stroke and Environmental Improvement ◆ Mist without a wet feeling "Cool Mist Line" ◆ Cooling vests using refrigerants "Cooling Vest" "Ice Hane Vest" ◆ Air conditioning + indoor ventilation + chair negative pressure reduction "ecowin Air" 3. Green Maintenance and Services ◆ Video inspection service for narrow and dark places using a special small drone "IBIS2" ◆ Complete renovation of FRP water tanks "Tungsten Coat" ◆ Scale and slime adhesion prevention device for piping "Pola" 4. Disaster Prevention and Mitigation ◆ Automatic fire extinguishing system that does not require power "Fire Erase" and others.

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in pipes, corrosion against rust, and suppress the generation of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no harmful waste.

★ Developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, this "magnetic water treatment device" uses a powerful permanent magnet (6000 Gauss) to prevent scale formation in pipes, protect against rust, and suppress the generation of slime, such as in chiller clean towers. ★ When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. ★ Its simple structure allows for easy installation and maintenance, making it usable for almost an indefinite period. ★ No water treatment chemicals are required. ★ The treated water is safe and produces no harmful waste.

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in piping, corrosion against rust, and suppress the occurrence of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime within the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no pollution in wastewater.

"Bubble90" is a maintenance-free ultra-water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water released. The bubbles effectively hit the items being cleaned, removing dirt, and it demonstrates high cleaning power even with about one-tenth of the water volume compared to conventional methods. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference by simply turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free adaptation to the anticipated continuous rise in water rates. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the items being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth of the water volume compared to conventional methods. Additionally, it features a water pressure and flow adjustment function that can be instantly modified to suit the user's preferences by simply turning a ring. This eliminates the "unsatisfactory" feeling often associated with traditional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free management of water bills, which are expected to continue rising in the future. [Features] ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

★ Deteriorated and dirty FRP elevated water tanks and receiving tanks negatively impact the impression of a building. Additionally, FRP tanks are generally prone to algae growth and bacterial proliferation due to photosynthesis. ★ Tank Sten Coat PS500 solves all these problems. By applying Tank Sten Coat PS500 to existing FRP tanks, they can be transformed into entirely new tanks. ★ It comes with a 10-year warranty with responsible construction. ★ This 21st-century construction method is environmentally friendly as it reduces the generation of industrial waste by extending the service life.