TSP Product Lineup

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

★This unit can be installed inside a cubicle and connected to wires with crimp terminals, providing significant benefits for those who believe there is nothing more they can do to reduce power consumption and CO2 emissions through various measures. ★The main component of the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reducing internal resistance, promoting the flow of current, and thereby reducing power consumption and CO2 emissions. ★The ferrite (iron oxide) component also reduces harmonic noise. ★It achieves a reduction of over 5% in the overall power consumption of the cubicle, contributing significantly to the SDGs by also lowering CO2 emissions. ★If a power reduction effect of 5% or more is not recognized, we will remove the unit upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★It is a groundbreaking SDGs contribution unit that is unlike any other. ★It has been introduced in approximately 1,000 companies in Japan, with over 2,200 sets installed. It is also being expanded overseas.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining the comfort of the facility without causing environmental changes.

It is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be realized at a low price. Air usage: 28ℓ/min, water usage is from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressor for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

This is a portable partition that uses a high-performance heat-insulating sheet. ★ Width: approximately 1,000mm x Height: approximately 1,850mm x Depth: approximately 420mm. It comes with casters for easy movement. ★ With its high radiation heat reflection effect, you won't feel the heat just by placing it. ★ The product is delivered as a semi-finished product and is easy to assemble. ★ There is also a curtain type available.

"CLAIR" is a high-ceiling LED that achieves a maximum luminous efficiency of 143 lm/W. It comes in various types including E39 base, arm type, pendant type, and floodlight type. There are 432 combinations available, making it versatile for various settings such as factories, warehouses, and outdoor sports fields, effectively replacing mercury lamps and floodlights with LED. 【Features】 ■ Reduces power consumption & CO2 by up to 80% ■ All products have an IP rating of 65 or higher, making them suitable for outdoor use ■ Utilizes Rahima heat-dissipating PC resin for ultra-lightweight design ■ Performance tests for noise and other factors conducted by third-party organizations ■ Product specifications are based on actual measured values *For more details, please refer to the catalog or feel free to contact us.

★Generation of free electrons inside the ★ 　　　↓ 　Flowing free electrons into the electric wire 　　　↓ 　Inducing a smooth flow of current by reducing internal resistance 　　　↓ 　Reducing power consumption and lowering CO2 emissions ★Removable and reinstalled ★Widely adopted in facilities that use large amounts of power, such as manufacturing plants and rooftop radio towers/buildings, for energy conservation and CO2 emission reduction ★Please provide one year of electricity bills and meter reading data from your utility company. 　We will propose an appropriate ecomo capacity and investment recovery simulation. ★Proven track record of 2,200 sets domestically and internationally.

This is a portable partition that uses high-performance heat-insulating sheets. ★ Width: approximately 1,000mm x Height: approximately 1,850mm x Depth: approximately 420mm. It comes with casters for easy movement. ★ It employs high-performance heat-insulating sheets, which reflect high radiant heat, making it feel cool just by placing it. ★ The product is delivered as a semi-finished product and is easy to assemble. ★ A curtain type is also available.

This is a portable partition that uses high-performance heat-insulating sheets. □ The heat-insulating sheet was developed from the extreme temperature environments of the space industry, which includes ultra-high and ultra-low temperatures. □ The coating made from 99% pure aluminum has the ability to reflect 98% of radiant heat. □ Despite being extremely thin at 0.1 to 0.3 mm and lightweight, it is highly effective in heat insulation and is rated as the best in the world. □ Thanks to a special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electro-corrosion, allowing for over 10 years of use. □ It has non-combustible certification (Ministry of Land, Infrastructure, Transport and Tourism) and has undergone electro-corrosion prevention processing (SP-FN).

The high-performance heat-shielding sheet "Netsu Mamore" can cut almost all (95-97%) radiant heat thanks to its 99% pure aluminum coating. By installing it under the roofs, in the ceilings, and on the walls of buildings such as factories and warehouses, it alleviates indoor temperature rises, reduces air conditioning load, and contributes to energy savings. By directly applying it to high-temperature heat source equipment within factories (such as drying ovens, manufacturing furnaces, firing kilns, and piping ducts), it suppresses radiant heat and significantly reduces internal radiant loss, thereby lowering fuel costs, improving productivity, and providing heat-insulating mats that protect workers from burns and other injuries. It also helps improve the working environment, making it effective for heatstroke prevention. Covering control panels, equipment, and piping located outdoors or near high-heat equipment prevents failures and damage caused by heat. We offer a wide range of products tailored to various applications.

The "high-performance heat insulation sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. This effect can significantly contribute to the SDGs. By installing it under roofs, in ceilings, and on walls of buildings, the indoor temperature decreases, reducing the air conditioning operating rate, leading to energy-saving effects and also serving as a measure against heatstroke. In winter, its insulation effect prevents heating from escaping outside, resulting in energy savings. When applied to high-temperature equipment such as drying ovens and firing furnaces in factories, the surface temperature of the equipment decreases, alleviating the surrounding temperature and improving the working environment. Furthermore, it significantly reduces heat loss from the equipment, lowering fuel costs and increasing productivity. By covering control panels, devices, and piping located outdoors or near high-temperature equipment, it prevents failures and damage caused by heat. Thanks to its special surface treatment, it is resistant to corrosion from acids and alkalis as well as electrolytic corrosion, allowing for use for over 10 years (SP-PRO, SP-Air, SP-PED).

The "High-Performance Heat Insulation Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.5mm. It is lightweight, flexible, and easy to install. When applied to high-temperature equipment in factories, such as drying ovens and firing furnaces, it lowers the surface temperature of the equipment, alleviates the surrounding temperature, and improves the working environment. Furthermore, it significantly reduces heat loss within the equipment, thereby cutting fuel costs and enhancing productivity. Additionally, by covering control panels, devices, and piping located outdoors or near high-heat equipment, it prevents failures and damage caused by heat. 【Features】 - High heat insulation (reduction of heat loss) effect for energy saving, improvement of working environment, and increased productivity. - Its thinness allows for easy cutting with scissors or similar tools, making installation simple. - Heat insulation mats and easily installable portable panels are also available. - Installation on roofs of factories, warehouses, offices, and wooden houses contributes to energy savings and heatstroke prevention.

The "Clair High Ceiling LED Value PLUS" is an indoor mercury lamp and floodlight replacement LED lighting manufactured by Niinuma Co., Ltd. It is ideal for indoor factories, indoor warehouses, gymnasiums, and indoor sports facilities. 【Features】 ■ For indoor use only ■ Improved luminous efficiency ■ Usable in environments with steam and oil smoke *For more details, please refer to the catalog or feel free to contact us.

The high-performance heat-shielding sheet "Netsu Mamore" is: ★ A sheet that can cut almost all radiant heat due to its 99% pure aluminum coating. ★ It is extremely thin at 0.2mm, lightweight, flexible, and easy to install (SP-PRO, SP-HTR). ★ By simply applying it to high-temperature equipment in factories such as drying ovens, manufacturing furnaces, kilns, and piping, it significantly reduces heat loss from the equipment. ★ It contributes to improving the working environment for employees. ★ It greatly reduces fuel costs, enhances productivity, and contributes to energy savings and CO2 emission reductions. ★ With a special surface treatment, it is resistant to corrosion and electrolysis from acids and alkalis (SP-PRO, SP-CH, SP-Air, SP-SRX), has no aging degradation, and can be used for over 10 years. ★ There is also a heat-shielding mat + insulation mat that does not get hot when touched. 【Achievements and Examples of Use】 * High-temperature facilities such as drying ovens, boilers, kilns, and piping within factories * Various outdoor control panels * Attics and intermediate roofs of factories, warehouses, and facilities

The "High-Performance Heat Shield Sheet" is a product that can cut almost all radiant heat due to its aluminum coating with 99% purity. It is extremely thin, with a thickness of 0.2mm to 0.3mm. It is lightweight, flexible, and easy to install. By applying it to the windows of buildings such as factories and warehouses, it helps to mitigate indoor temperature increases, reduce air conditioning load, and achieve energy-saving effects. Our company’s case studies can be found at: https://www.tsp-kk.com/%E7%B4%8D%E5%85%A5%E4%BA%8B%E4%BE%8B3/

The high-performance heat shielding sheet "Netsu Mamore" is: ★ A sheet that can cut almost all radiant heat due to its 99% pure aluminum coating. ★ It is extremely thin at 0.2mm, lightweight, flexible, and easy to install (SP-PRO, SP-HTR). ★ It contributes to improving the working environment for employees. ★ By simply applying it to high-temperature equipment in factories such as drying ovens, manufacturing furnaces, kilns, and piping, it significantly reduces heat loss from the equipment. ★ It greatly reduces fuel costs, enhances productivity, and contributes to energy savings and CO2 emission reductions. ★ Thanks to its special surface treatment, it is resistant to corrosion from acids and alkalis and to electrolytic corrosion (SP-PRO, SP-CH, SP-Air, SP-SRX), with no aging degradation, allowing for over 10 years of use. ★ There is also a heat shielding mat + insulation mat that does not get hot to the touch. 【Achievements and Examples of Use】 * High-temperature facilities such as drying ovens, boilers, kilns, and piping within factories * Various outdoor control panels * Attics and mid-roofs of factories, warehouses, and facilities

The high-performance heat shielding sheet "Netsu Mamore" is: ★ A sheet that can cut almost all radiated heat due to its 99% pure aluminum coating. ★ It is extremely thin at 0.2mm, lightweight, flexible, and easy to install (SP-PRO, SP-HTR). ★ It contributes to improving the working environment for operators. ★ By simply applying it to high-temperature equipment in factories, such as drying ovens, manufacturing furnaces, kilns, and piping, it significantly reduces heat loss from the equipment. ★ It greatly reduces fuel costs, enhances productivity, and contributes to energy savings and CO2 emission reductions. ★ Thanks to a special surface treatment, it is resistant to corrosion from acids and alkalis, as well as electrolysis (SP-PRO, SP-CH, SP-Air, SP-SRX), and has no aging deterioration, allowing for over 10 years of use. ★ There is also a heat-insulating mat that combines a heat shielding sheet and an insulating mat, which does not get hot to the touch. 【Achievements and Application Examples】 * High-temperature facilities such as drying ovens, boilers, kilns, and piping within factories * Various outdoor control panels * Attics and mid-roofs of factories, warehouses, and facilities