TSP Product Lineup

The Cool Roof is a heat-insulating and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. **Features** ★ The Cool Roof uses sheets made of polyethylene-based resin. ★ It blocks sunlight with the sheets, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheets and the roof prevents heat transfer. ★ Air flows through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas on single corrugated roofs (verified measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress radiant cooling, which helps reduce condensation. ★ Additionally, it has noise reduction effects and protects roofing materials. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day (depending on the type of corrugated material and environment).

★We would like to introduce a unit that can be installed inside a cubicle and connected to wires with crimp terminals, which is expected to have a significant effect for those considering various measures to reduce power consumption and CO2 emissions, and wondering if there is anything more that can be done. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reducing internal resistance, promoting the flow of current, thereby reducing power consumption and CO2 emissions. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★By reducing the overall power consumption of the cubicle by more than 5%, it also contributes to a reduction in CO2 emissions, making a significant contribution to the SDGs. ★If a power reduction effect of more than 5% is not recognized, we will remove the unit upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★It is a groundbreaking SDGs contribution unit that is unlike any other. ★Over 2,200 sets have already been installed domestically.

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options) (water tank is optional). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of electricity for the compressor, achieving about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of over -8°C (varies depending on the environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be kept low. Air consumption: 28ℓ/min, water consumption is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

It is a mist that does not wet products or workers at all. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization heat. ★ In summer, it provides site cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation area. ★ Both initial and running costs can be kept low. Air usage: 28ℓ/min, water usage is between 7mℓ/min and 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (demo units are also available for loan).

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

For manufacturers, reducing energy costs is an important issue. In particular, production equipment consumes a significant amount of electricity, and rising electricity prices can pressure profits. Energy-saving measures are essential not only for cost reduction but also for enhancing a company's sustainability. ecomo supports companies in achieving their energy-saving goals simply by being installed in a cubicle, reducing electricity consumption. 【Usage Scenarios】 - Factories - Production lines - Various manufacturing equipment 【Benefits of Implementation】 - Reduction in electricity costs - Reduction in CO2 emissions - Decrease in the environmental impact of companies

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and reduce power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not adversely affect the cubicle, allowing you to use it with peace of mind. ★This is a groundbreaking energy-saving and power-saving unit unlike any other.

❖ Consists of a three-layer coating. The primer ensures adhesion to the substrate, the middle layer is a low thermal conductivity layer containing aerogel, and the top layer is a silver low-emissivity layer that reduces radiation. ❖ Insulation is possible even for complex shapes and equipment. Since it is a paint, insulation can be applied without considering the shape. ❖ Reduces condensation and prevents rust formation. It eliminates water droplet formation and can also prevent mold growth. ❖ Visualizes equipment corrosion. Even if the paint partially peels off due to physical contact, it is possible to visually confirm the corrosion of the piping.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the right timing, all while maintaining the comfort of the facility without causing environmental changes.

Mainly products and services for heat stroke prevention at factory sites ▮ The definitive solution for heat stroke prevention for factory workers with completely dry mist ▮ Mist fans that cool the entire factory with winds reaching 10m and 20m ▮ Cooling vests using cooling agents ▮ Cooling vests for full harnesses using cooling agents ▮ Portable heat shielding sheets to protect workers from high-temperature facilities in the factory ▮ Portable heat shielding sheets to alleviate room temperature throughout the factory and protect workers from high-temperature equipment ▮ Temperature alleviation throughout the factory and warehouse with metal corrugated roof heat shielding sheets ▮ Heat shielding paint that maintains effectiveness for a long time to alleviate the temperature of the entire building ▮ High-quality heat shielding film for windows ▮ Heat shielding paint and heat shielding sheets for glass

❖ Ideal for pits approximately 4m x 5m in size ❖ Flexibly follows waves and liquid surface fluctuations, continuously sucking and recovering surface oil, water, and floating debris ❖ Unique gate structure allows the inlet to swing, efficiently recovering high-viscosity oil and solids (scum) (SWPN type is a non-swinging type) ❖ Equipped with an underwater pump, enabling both recovery and transfer with this single unit ❖ By reducing the number of floats compared to conventional products, the flow space has been expanded, achieving smooth recovery ❖ The frame supporting the floats is arched, making it easy to carry ❖ The frame is made of SUS304, which has excellent corrosion resistance

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ Additionally, it provides noise reduction and roof material protection effects. ★ It comes with a 5-year performance guarantee, with annual inspections conducted during this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between the installed and uninstalled areas of single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can also suppress condensation by reducing radiative cooling. ★ Additionally, it has noise reduction effects and protects roofing materials. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

The Cool Roof is a heat insulation and thermal insulation system developed for metal corrugated roofs commonly used in factories and warehouses. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ Reduces rain noise and sound resonance. The Cool Roof acts as a cushion, reducing the sound of rain and hail. ★ Blocks sunlight with a sheet, preventing temperature rise across the entire roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single corrugated roofs (demonstrated measurement results). ★ Mitigates room temperature rise, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ Additionally, it provides noise reduction and roof material protection effects. ★ Comes with a 5-year performance warranty, with annual inspections during this period. ★ Installation for 1,000 square meters takes about one day, ensuring a short construction period.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It continuously releases water bubbles by converting water into a bubbly form inside the nozzle and varying the discharge amount. The bubbles effectively hit the items being cleaned, removing dirt while achieving high cleaning power even with about one-tenth of the conventional water volume. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference by simply turning a ring. This eliminates the "unsatisfactory" feeling often associated with traditional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free adaptation to the anticipated continuous rise in water rates. 【Features】 ■ High cleaning and water-saving effectiveness ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

This is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides site cooling of over -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature dropped from 40°C to 27°C depending on the installation environment. ★ It can be installed in a space, requiring minimal space for installation. ★ Both the initial and running costs can be kept low. Air usage: 28ℓ/min, water usage ranges from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can also install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 5L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for approximately 85% reduction in electricity consumption per unit. ★ We can come for a demonstration (we also offer rental of demo units).

It is a mist that completely prevents products and workers from getting wet. It can be used even in factory environments where getting wet is a concern. ★ With an average particle size of 15μm, it cools through high-speed vaporization. ★ In summer, it provides cooling of more than -8°C (varies by environment), and in winter, it can be used for humidification throughout the year. There have been cases where the temperature in factories using steam dropped from 40°C to 27°C. ★ It can be installed in a space, requiring minimal installation space. ★ Both the initial and running costs can be realized at a low price. Air usage: 28ℓ/min, water usage is from 7mℓ/min to 40mℓ/min, with approximately 4ℓ used per unit per day (8 hours). ★ Easy installation If you have a compressor and water supply, installation is possible. Customers can install it themselves, and it can be operational immediately. If there is no water supply, it can also be used with a water tank (available in 2L and 4L options). ★ Of course, it significantly reduces electricity costs. Compared to a spot air conditioner (2-port type) at 1.7kW, the Cool Mist Line uses only 0.264kW of compressor electricity, allowing for about an 85% reduction in electricity consumption per unit. ★ We will come for a demonstration (we also offer rental of demo units).

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in pipes, corrosion against rust, and suppress the generation of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no harmful waste.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and freezer compressors, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining comfort in the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressors for energy efficiency at the appropriate timing, all while maintaining the comfort of the facility without causing environmental changes.

"ESCO-ONE" monitors the operating status of commercial air conditioners, freezers, and compressor units, and helps reduce power consumption by controlling the compressor for energy efficiency at the right timing, all while maintaining comfort in the facility without causing environmental changes.

★ Developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, this "magnetic water treatment device" uses a powerful permanent magnet (6000 Gauss) to prevent scale formation in pipes, protect against rust, and suppress the generation of slime, such as in chiller clean towers. ★ When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime inside the pipes. ★ Its simple structure allows for easy installation and maintenance, making it usable for almost an indefinite period. ★ No water treatment chemicals are required. ★ The treated water is safe and produces no harmful waste.

A "magnetic water treatment device" developed as a result of over 20 years of joint research between Norway's national research institutions and the University of Oslo, using a powerful permanent magnet (6000 gauss) to prevent scale formation in piping, corrosion against rust, and suppress the occurrence of slime, such as in chiller clean towers. When water flows through a strong magnetic field, a weak current is induced according to Faraday's law of electromagnetic induction, preventing the new formation of scale, red rust, and slime within the pipes. Due to its simple structure, installation is easy, maintenance is straightforward, and it can be used almost permanently. No water treatment chemicals are required. The treated water is safe and produces no pollution in wastewater.

This is a portable partition that uses a high-performance heat-insulating sheet. ★ Width: approximately 1,000mm x Height: approximately 1,850mm x Depth: approximately 420mm. It comes with casters for easy movement. ★ With its high radiation heat reflection effect, you won't feel the heat just by placing it. ★ The product is delivered as a semi-finished product and is easy to assemble. ★ There is also a curtain type available.

▮ It can be easily attached to the window frame sash. Just cut it to the size of the window and stick it on with the included double-sided tape. ▮ It has a high heat insulation effect, helping to moderate the indoor temperature. ▮ Perfect for energy-saving measures. ▮ It also provides privacy protection. ▮ Available in two sizes: M (150mm x 95mm) and L (210mm x 95mm). ▮ Colors available are white, silver, and ivy pattern.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the items being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth of the water volume compared to conventional methods. Additionally, it features a water pressure and flow adjustment function that can be instantly modified to suit the user's preferences by simply turning a ring. This eliminates the "unsatisfactory" feeling often associated with traditional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free management of water bills, which are expected to continue rising in the future. [Features] ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

"Bubble90" is a maintenance-free water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water discharged. The bubbles effectively hit the surfaces being cleaned, removing dirt while achieving high cleaning power with about one-tenth the amount of water used traditionally. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free adaptation to the anticipated continuous rise in water rates. [Features] ■ High cleaning and water-saving effectiveness ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

"Bubble90" is a revolutionary water-saving device that is completely different in dimension from conventional water-saving cartridges and nozzles, featuring compatibility with hard and soft water and maintenance-free functionality. It converts water into bubbles inside the nozzle and continuously releases these bubbles while varying the amount of water released. The bubbles effectively hit the surfaces being cleaned, removing dirt and demonstrating high cleaning power even with about one-tenth the amount of water used traditionally. Additionally, it is equipped with a water pressure and flow adjustment feature that can be instantly adjusted to the user's preference simply by turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment functionality ■ Maintenance-free with clog prevention features ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

"Bubble90" is a maintenance-free ultra-water-saving nozzle equipped with a clog prevention flash function. It converts water into bubbles inside the nozzle and continuously releases them while varying the amount of water released. The bubbles effectively hit the items being cleaned, removing dirt, and it demonstrates high cleaning power even with about one-tenth of the water volume compared to conventional methods. Additionally, it features a water pressure and flow adjustment function that can be instantly adjusted to the user's preference by simply turning a ring. This eliminates the "unsatisfactory" feeling often associated with conventional water-saving devices. With the aging of water supply infrastructure, it allows for stress-free adaptation to the anticipated continuous rise in water rates. 【Features】 ■ High cleaning effectiveness and water-saving efficiency ■ Easy installation ■ Equipped with water pressure and flow adjustment function ■ Maintenance-free with clog prevention function ■ Usable in any region, whether hard or soft water For more details, please refer to the catalog or feel free to contact us.

Touring the factory, the pipes through which water flows can be likened to "blood vessels" in a human body. Just as human blood vessels and factory pipes age (degrade over time), they can develop various troubles. To continue using the "pipes," which are the blood vessels of the factory, it is important to conduct regular health checks to prevent issues before they arise. ◆ Are there any factors that could lead to trouble? - The pipes have been in place for over 15 years. - The flow through the pipes is poor. - There are strange odors or noises coming from the pipes. - There has been a history of leaks in the system. ◆ If any of the above phenomena are present, a current investigation of the pipes is necessary.

In addition to air conditioning equipment, factories have various types of heat exchangers and piping (for gas, oil, etc.). These complex systems are often thought of as "things that cannot be cleaned," but in reality, cleaning them can lead to significant improvements in overall factory productivity. You can trust us to handle these cleaning processes, which require advanced cleaning technology, with confidence.

【Features of this Drone】 ■ New Functionality! : Added hovering assist function for stable flight in confined spaces 　→ The drone body, its control software, image processing, and other applications are all developed in-house and are domestically produced. ■ Currently the smallest and lightest class, capable of flying for 11 minutes on a single battery 　→ Weight: 243g including battery, Size: 200mm□ or less ■ LED lighting + ultra-sensitive camera → A special camera that can capture clear images even in deep dark spaces Additionally, we offer various plans for equipment inspection, spatial measurement services, rental, and purchase based on your needs using this product. 【Facilities and Equipment for Inspection】 ■ Inside chimneys ■ Inside piping (ducts) ■ Inside boilers ■ Attics and underground pits ■ Inside bridge girders and highways ■ Ceiling beams, elevators, and multi-story parking lots *For more details, please refer to the materials. Feel free to contact us with any inquiries.

This is an electromagnetic water treatment device designed to prevent scale adhesion, corrosion, and slime suppression without chemicals, in order to maintain the stability of cooling water efficiency in cooling system piping in factories and various facilities.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs commonly used in factories and warehouses. It is effective in summer for heat shielding and in winter for building insulation and condensation prevention. It contributes to energy saving and environmental improvement throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy savings. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof can suppress radiative cooling, which also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and roof material protection. ★ It comes with a 5-year performance guarantee, with annual inspections during this period. ★ The running cost is "zero." ★ Installation for 1,000 square meters takes about one day (using the standing seam method).

"CLAIR" is a high-ceiling LED that achieves a maximum luminous efficiency of 143 lm/W. It comes in various types including E39 base, arm type, pendant type, and floodlight type. There are 432 combinations available, making it versatile for various settings such as factories, warehouses, and outdoor sports fields, effectively replacing mercury lamps and floodlights with LED. 【Features】 ■ Reduces power consumption & CO2 by up to 80% ■ All products have an IP rating of 65 or higher, making them suitable for outdoor use ■ Utilizes Rahima heat-dissipating PC resin for ultra-lightweight design ■ Performance tests for noise and other factors conducted by third-party organizations ■ Product specifications are based on actual measured values *For more details, please refer to the catalog or feel free to contact us.

Water quality testing for equipment water is often conducted to investigate the causes when issues arise in air conditioning systems and other equipment. Based on extensive experience and a accumulated database, testing items are selected according to the situation of the trouble, and the causes are pursued based on the results. Additionally, when the cause is identified through water quality testing, measures such as pipe cleaning and chemical treatment are considered, proposing a total maintenance approach of 【water quality testing → equipment cleaning → water quality management】. ■ Examples of Equipment Water Quality Testing CASE 1: Water Quality Change (P22) 【Changes in water quality are a red flag for equipment troubles!】 CASE 2: Abnormal Shutdown of Cooling Tower (P22) 【The water quality is fine, but the cooling tower has an abnormal shutdown!】 CASE 3: Hole in the Condenser of the Freezer (P22) 【Strange? There’s a hole in the condenser of the freezer!】 *Japan Water Treatment Industry is a registered organization under Article 20 of the Water Supply Act, registered by the Ministry of Health, Labour and Welfare.

★Injecting free electrons into the power line 　　　↓ 　Inducing a smooth flow of current by reducing internal resistance 　　　↓ 　Power reduction unit that decreases power consumption and CO2 emissions ★Removable & re-installable ★Widely used for energy saving in facilities that consume large amounts of power, such as manufacturing plants and rooftop radio towers/buildings ★Please provide one year of electricity bills and meter reading data from your utility company. 　We will propose the appropriate ecomo capacity and investment recovery simulation. ★Proven track record of 2,200 sets domestically and internationally *For more details, please contact us below*

This is a portable partition that uses high-performance heat-insulating sheets. ★ Width: approximately 1,000mm x Height: approximately 1,850mm x Depth: approximately 420mm. It comes with casters for easy movement. ★ It employs high-performance heat-insulating sheets, which reflect high radiant heat, making it feel cool just by placing it. ★ The product is delivered as a semi-finished product and is easy to assemble. ★ A curtain type is also available.

The Cool Roof is a heat insulation and thermal insulation system developed for metal standing seam roofs. It effectively provides heat shielding in summer and insulation and condensation prevention in winter, contributing to energy savings throughout the year. 【Features】 ★ It blocks sunlight with a sheet, preventing the overall temperature rise of the roof. ★ The space (air layer) between the sheet and the roof prevents heat transfer. ★ Wind passes through the sheet holes and air layer, allowing warm air to escape. ★ The heat shielding effect in the summer under direct sunlight shows a temperature difference of nearly 30°C between areas with and without installation on single standing seam roofs (demonstrated measurement results). ★ It mitigates the rise in room temperature, significantly reducing air conditioning costs and contributing to energy conservation. ★ In winter, it prevents warm air from escaping, demonstrating insulation effectiveness. ★ The Cool Roof, which can suppress radiative cooling, also helps reduce condensation. ★ As a secondary effect, it provides noise reduction and protects roofing materials. ★ There is a 5-year performance guarantee, with annual inspections conducted within this period. ★ Installation for 1,000 square meters takes about one day, resulting in a short construction period.

"Ree Roof" is a heat insulation and thermal insulation system for metal standing seam roofs that utilizes the effect of "shade." It employs polyethylene resin sheets. By covering approximately 80% of the standing seam roof, various benefits can be achieved. Additionally, it can be installed on two types of roofs: the standing seam type commonly found in large warehouses and factories, and the overlapping type seen in smaller stores. For other types of roofs, such as snap-lock, please contact us. 【Features】 ■ Low cost ■ Short installation time ■ Zero maintenance cost ■ Sustained effectiveness ■ Long lifespan *For more details, please refer to the PDF document or feel free to contact us.

★Simply install this unit inside the cubicle and connect it to the wires using crimp terminals. ★The main component inside the unit, tourmaline (electric stone), generates free electrons on its own, which flow into the wires, reduce internal resistance, promote the flow of current, and reduce power consumption. ★The other component, ferrite (iron oxide), also reduces harmonic noise. ★A reduction of over 5% in the overall power consumption of the cubicle can be achieved. ★If a reduction effect of 5% or more is not recognized, we will remove it upon request (only during the initial installation). ★This unit itself does not conduct electricity, so it does not consume power and will not negatively affect the distribution board, allowing you to use it with peace of mind. ★This is a groundbreaking energy-saving and power-saving unit unlike any other.

★An original recovery device that contributes to the environment with fluid transfer technology and boasts numerous awards. ★We offer an excellent range of recovery devices for collecting oil and floating debris across a wide variety of sites, from factories and kitchens to oceans and rivers. 【Lineup】 ■Standard Specification Type 　　Double float structure: Flexibly follows the up-and-down swaying of the skimmer and fluctuations in liquid level caused by wave variations and air mixing. 　　Specially molded main float shape: By supplementing the shape of the submerged part, the gap at the oil-water inflow section has been widened. ■Special Specification Type 　　Heavy-duty type: Optimized for recovering oil mixed with slurry. 　　High-viscosity type: For recovering high-viscosity floating oil and solid floating debris (scum). 　　Compact type: Usable in narrow spaces such as manholes. 　　Large type: For recovering and transferring floating oil in deep pits where self-priming is not possible.

【Pinpoint Fire Extinguishing】 A single tube quickly detects fires and automatically performs initial extinguishing. 【Rich Track Record】 Over 4,000 sets delivered nationwide. It is a highly reliable automatic extinguishing system. 【No Electrical Wiring Required】 The detection of fire, release of extinguishing agents, and extinguishing process are all performed mechanically, so no external power source or backup power is needed. 【Low Cost and Easy Installation】 The special resin tube can be easily bent, accommodating any shape of installation location. It can be installed in machine enclosures or hard-to-reach areas without extensive construction, making it cost-effective. 【Can Be Installed in Explosion-Proof Areas】 Since the fire extinguishing system does not use electrical operations, it can be installed in explosion-proof areas without special construction. 【Maintains with Minimal Maintenance】 After installation, the fire extinguishing system's pressure only needs to be checked regularly to maintain extinguishing performance. 【Choice of Extinguishing Agents According to Application】 Extinguishing agents such as Novec1230, water mist, CO2, metal fire extinguishing agent Metalex, and ABC powder extinguishing agent can be selected based on the type of protected object, the risk of secondary disasters, and the presence of openings.