野田スクリーン List of Products and Services

The "PCH Series" is a sulfurization prevention coating agent that protects metals like Ag and Cu from corrosive gases. It not only prevents sulfurization but also protects against moisture, making it ideal for LED mounting substrates. Since this product forms a colorless and transparent film, the total light transmittance does not decrease even after application. To evaluate gas corrosion resistance, we conducted gas corrosion tests to confirm the maintenance rate of gloss before and after testing. The results are detailed with comparative images of the silver plate used as the substrate in its pre-test, uncoated state, and after applying this product. 【Features】 ■ Sulfurization resistance ■ Corrosive gas resistance ■ Moisture and drip protection ■ Adhesion ■ Rust prevention ■ Transparency ■ Room temperature drying

• Coating Agent
• LED Module

Typhoons and guerrilla rainstorms can cause seawater to be stirred up, leading to failures in outdoor equipment. Would you like to take measures against such risks in advance with conformal coating agents? - With high fluorine content, it provides excellent water and oil repellency, strongly protecting electronic components and circuit boards from humidity, condensation, rust, and oil. - The fluorine coating has excellent resistance to sulfuration, preventing the sulfuration of silver and copper. - When combined with waterproof design, reliability is further enhanced. - The transparent coating can be directly applied to LED-mounted circuit boards, maintaining their brightness. - It adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). - It uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. - Application can be done using dispensers, brushes, dipping, or spraying. - It is not classified as hazardous material under fire safety laws, making it highly safe and eliminating the need for explosion-proof equipment or hazardous material storage.

• Coating Agent
• inverter
• Lithium-ion battery

We have developed a "solvent-free UV-curable conformal coating" that "protects" electronic substrates from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free also contributes to VOC measures within the factory. It excels as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is an increasing demand for UV-curable coatings due to the reduction of organic solvent usage from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to traditional coatings for automotive electronics, complying with international standards (IPC-CC-830). It can be used with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UNNo. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

• Coating Agent

Utilizing the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating market, we present our "room temperature fast-drying non-flammable conformal coating" made from fluororesin, which provides "moisture-proof and insulation protection" for electronic substrates. Our conformal coating allows for room temperature drying due to the use of low-boiling-point fluorinated solvents, significantly contributing to the reduction of fossil fuel usage and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and offers superior long-term durability compared to conventional coatings used in automotive applications, complying with international standards (IPC-CC-830). To meet the detailed requests of users, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. We also have fluorinated products and solvent-free UV options available, and we can propose products tailored to your applications and preferences! 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials
• Coating Agent

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest at all, please feel free to contact us.

• Cleaning agents

For companies using flammable organic solvents, how about considering non-flammable solvents to minimize the risk of fire? They are classified as non-hazardous under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage! You can reduce the amount of solvents managed in hazardous material storage. 〇 No flash point 〇 High safety as they are not classified as hazardous materials under the Fire Service Act, eliminating the need for explosion-proof equipment and hazardous material storage 〇 Our unique blended solvent 〇 Low surface tension 〇 Usable as a cleaning agent or diluent If you have any interest, please feel free to contact us.

• Cleaning agents

We have developed a "solvent-free UV-curable conformal coating agent" that "protects" electronic circuit boards from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production time. The time required for forced drying can be reduced to just a few seconds. Being solvent-free also contributes to VOC measures within the factory. It demonstrates its effectiveness as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is a growing demand for UV-curable products due to the reduction of organic solvent use from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, meeting international standards (IPC-CC-830). It is compatible with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UN No. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to consult us with any questions.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating market, we have developed a "room temperature fast-drying non-flammable conformal coating" made from non-fluorinated resin to meet the demands of companies concerned about PFAS, providing "moisture-proof and insulation protection" for electronic substrates. Our conformal coating uses low-boiling fluorinated solvents, allowing for room temperature drying, which significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, complying with international standards (IPC-CC-830). To accommodate users' specific requests, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. We also provide fluorinated products and solvent-free UV options, tailoring our recommendations to your applications and preferences! 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials
• Coating Agent

We have developed a "solvent-free UV-curable conformal coating" that "protects" electronic circuit boards from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free also contributes to VOC measures within the factory. It demonstrates its effectiveness as a countermeasure against equipment failures in harsh environments or near the sea. Abroad, there is a growing demand for UV-curable coatings due to the reduction of organic solvent use from an environmental perspective. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, meeting international standards (IPC-CC-830). It can accommodate various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UN No. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a non-fluorinated resin "room temperature fast-drying conformal coating agent" to provide "waterproof and moisture-proof protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling fluorinated solvents, making it easy to achieve waterproof and moisture-proof protection. By eliminating the thermal drying process, it significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, meeting international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. It has resistance to corrosive gases and functions even in harsh environments (such as hot spring areas and tunnels). 【Features】 ■ Thin film high performance ■ Waterproof and moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reducing fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Coating Agent

If you are considering use in harsh environments, please consider conformal coating agents. They cure instantly under UV light and, being solvent-free, contribute to VOC measures within the factory. By changing the thermal drying process to a UV curing process, it significantly contributes to the reduction of fossil fuel use and carbon dioxide emissions. We can also propose UV curing equipment. Additionally, compared to conventional coatings (organic solvent-based) commonly used for automotive electronics, our products are more resistant to temperature changes, have excellent long-term durability, and comply with international standards (IPC-CC-830). They can accommodate various dispensers (spray, needle, etc.). 【Features】 - Solvent-free - No thermal curing process required - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not classified under UNNo. - Easy to apply (approximately 100–1000 m·Pa) We also offer a lineup of fluorine-based and PFAS countermeasures besides solvent-free UV options. If you would like samples, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

• Coating Agent

Leveraging our long-standing expertise in conformal coatings, we have developed a VOC-free "solvent-free UV-curable conformal coating." It cures instantly under UV light, significantly reducing production time. Being solvent-free allows for VOC measures in the factory and consideration for the environment. By changing the thermal drying process to a UV curing process, we greatly contribute to the reduction of fossil fuel usage and carbon dioxide emissions. It has excellent insulation properties and can protect electronic substrates. It is suitable for substrates expected to be used in harsh environments. 【Features】 - No organic solvents used - No thermal curing process required - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not subject to UN No. - Easy to apply (approximately 100–1000 m·Pa) - High insulation properties In addition to solvent-free UV, we also offer a lineup of fluorine-based and PFAS countermeasures. If you would like samples, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a "room temperature fast-drying conformal coating agent" made of fluororesin to provide "waterproof and moisture-proof protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling-point fluorinated solvents, making it easy to achieve waterproof and moisture-proof protection. By omitting the thermal drying process, it significantly contributes to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, meeting international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. It has resistance to corrosive gases and functions even in harsh environments (such as hot spring areas and tunnels). 【Features】 ■ Thin film high performance ■ Waterproof and moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

We propose three types of conformal coatings as measures against liquid leakage for lithium-ion batteries and capacitors. 'Fluorine-based' Fast-drying at room temperature with low odor! It is easy to handle as it is classified as a non-hazardous material under fire safety laws. Compared to organic solvent-based coatings, it has a thin film and low heat retention. 'Solvent-free UV' Cures instantly with UV light, significantly reducing production time. It also contributes to VOC measures within the factory. Since it is not classified under UNNo., overseas transportation is easy. 'Non-fluorine-based' As a PFAS countermeasure, it does not use fluorine resin and dries quickly at room temperature compared to organic solvents. It also contributes to reducing production costs as it does not require a thermal curing oven. All of these products are more resistant to temperature changes and have superior long-term durability compared to conventional coatings for automotive electronics (organic solvent-based), and they comply with international standards (IPC-CC-830). They can accommodate various dispensers. [Features] ■ Waterproof and moisture-proof ■ Insulating ■ Corrosion gas resistant ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability For those who would like to try it, we offer free samples upon consultation. Please feel free to contact us.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a "room temperature fast-drying conformal coating agent" made of fluororesin to provide "moisture-proof insulation protection" for electronic substrates. Our conformal coating agent allows for room temperature drying using low-boiling-point fluorinated solvents, making it easy to achieve moisture-proof insulation protection. It significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, complying with international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests, dielectric strength tests, and thermal shock tests. In addition to moisture protection, it also has resistance to corrosive gases, functioning effectively even in harsh environments. 【Features】 ■ Thin film high performance ■ Moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

We offer three types of conformal coatings. "Fluorine-based" Fast-drying at room temperature with low odor! It is easy to handle as it is classified as a non-hazardous material under the Fire Service Act. Compared to organic solvent-based coatings, it has a thin film and low heat retention. "Solvent-free UV" Cures instantly with UV light, significantly reducing production time. It also contributes to VOC measures within the factory. Since it is not subject to UNNo., overseas transportation is easy. "Non-fluorine-based" As a PFAS countermeasure, it does not use fluoropolymer and dries quickly at room temperature compared to organic solvents. It contributes to reducing production costs as it does not require a thermal curing oven. All of these products are more resistant to temperature changes and have superior long-term durability compared to traditional coatings for automotive electronics (organic solvent-based), and they comply with international standards (IPC-CC-830). They can accommodate various dispensers. [Features] ■ Waterproof and moisture-proof ■ Insulating properties ■ Corrosion gas resistance ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ UNNo. non-applicable product numbers available Free samples are also available. For more details, please download the PDF or feel free to contact us.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a non-fluorinated "room temperature fast-drying non-flammable conformal coating agent" to meet the demands of companies concerned about PFAS, which provides "moisture-proof insulation protection" for electronic substrates. Our conformal coating agent can dry at room temperature using low-boiling-point fluorinated solvents, making it easy to provide moisture-proof insulation protection. By omitting the thermal drying process, it significantly contributes to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, and it complies with international standards (IPC-CC-830). We have also conducted constant temperature and humidity tests. In addition to moisture protection, it also has resistance to corrosive gases, functioning even in harsh environments. 【Features】 ■ Moisture-proof insulation ■ Migration prevention ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to consult us with any questions.

• Composite Materials

Leveraging the resin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating agent market, we have developed a "room temperature fast-drying non-flammable conformal coating agent" made from non-fluorinated resins to meet the demands of companies concerned about PFAS, providing "moisture-proof and insulation protection" for electronic substrates. Our conformal coating agent allows for room temperature drying due to the use of low-boiling-point fluorinated solvents, significantly contributing to the reduction of fossil fuel usage and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings used in automotive applications, meeting international standards (IPC-CC-830). To accommodate users' detailed requests, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Exempt from fire safety regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

Is your company addressing VOC measures? Utilizing the insights we have gained over many years in the conformal coating market, we have developed a "solvent-free UV-curable conformal coating" that "protects" electronic substrates. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free, it also contributes to VOC measures within the factory. Moreover, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, and it complies with international standards (IPC-CC-830). It can accommodate various dispensers (spray, jet, needle, etc.). 【Features】 - No need for thermal curing process - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not classified under UNNo. - Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to consult us with any questions.

• Charger

Leveraging the knowledge we have accumulated over many years in conformal coatings, we have developed a VOC-free "solvent-free UV-curable conformal coating." This coating cures instantly under UV light, significantly reducing production time. Being solvent-free also contributes to VOC measures within the factory. By changing the thermal drying process to a UV curing process, we greatly contribute to the reduction of fossil fuel usage and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to traditional coatings for automotive electronics (organic solvent-based), and it complies with international standards (IPC-CC-830). It is compatible with various dispensers. 【Features】 ■ No organic solvents used ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not classified under UNNo. ■ Easy to apply (approximately 100–1000 m·Pa) We also offer a lineup of fluorine-based and PFAS countermeasure products besides solvent-free UV options. If you would like a sample, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

• Coating Agent

AegisCoat "PCH Series" prevents the sulfide formation of silver and copper through a sulfur-resistant fluoropolymer coating. Additionally, it exhibits excellent moisture resistance and strong adhesion to the substrate, providing high rust prevention performance. It is ideal for corrosion protection of electronic substrates. The room temperature quick-drying coating has good workability and is user-friendly. Various application methods such as brush application, dipping, and dispensers are possible.

• Coating Agent

At Noda Screen, we will continue to manufacture and sell fluorine products while closely monitoring regulations. We offer a variety of products, from oil repellents to conformal coatings for electronic substrates. We are also focusing on the development of new products every day, so please let us know the functions and characteristics you are looking for. We look forward to your inquiries.

• Coating Agent

Leveraging the knowledge we have gained over many years in conformal coatings, we have developed a "solvent-free UV-curable conformal coating" that "protects" electronic substrates. It cures instantly with UV light, significantly reducing production time. Being solvent-free also contributes to VOC measures within the factory. Unlike organic solvent-based products, it is not subject to UNNo. regulations, making overseas transportation easier. It can be used both domestically and internationally! Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics (organic solvent-based), and it complies with international standards (IPC-CC-830). It is compatible with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UNNo. regulations ■ Easy to apply (approximately 100–1000 m·Pa) We also offer a lineup of fluorine-based and PFAS countermeasure products besides solvent-free UV options. If you would like samples, please contact us. ★ For more details, please download the materials or feel free to consult us with any questions.

• Coating Agent

Utilizing the resin polymerization technology we have cultivated over many years and our insights in the conformal coating market, we have developed a "room temperature fast-drying non-flammable conformal coating" made from non-fluorinated resins for companies concerned about PFAS, which provides "moisture-proof and insulation protection" for electronic substrates. Our conformal coating allows for room temperature drying due to the use of blended low-boiling-point fluorinated solvents, significantly contributing to the reduction of fossil fuel usage and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, meeting international standards (IPC-CC-830). To accommodate users' specific requests, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Lithium-ion battery

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, oil, etc. ■ Prevents sulfide formation of silver and copper with an excellent sulfur resistance coating. ■ The transparent coating allows for direct application on LED mounted boards while maintaining their brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorinated solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using dispensers, brushes, dipping, or spraying. ■ Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

• Coating Agent

Leveraging the resin polymerization technology we have cultivated over many years and our insights in the conformal coating market, we have developed a non-fluorinated "room temperature fast-drying flame-retardant conformal coating" for electronic substrates in response to the demands of companies concerned about PFAS. Our conformal coating uses low-boiling fluorinated solvents, allowing for room temperature drying, which significantly contributes to reducing the use of fossil fuels and carbon dioxide emissions by eliminating the need for thermal drying processes. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, complying with international standards (IPC-CC-830). To meet the detailed requests of users, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. 【Features】 ■ No need for thermal curing process ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

We have developed a "solvent-free UV-curable conformal coating agent" that "protects" electronic substrates from water, moisture, and corrosive gases. It cures instantly under UV light, significantly reducing production man-hours. It can also cure with UV LED (365nm). Since it can cure with a single wavelength, equipment investment can be minimized. Being solvent-free, it also contributes to VOC measures within the factory. By switching from thermal drying processes to UV, it greatly contributes to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, and it complies with international standards (IPC-CC-830). It can accommodate various dispensers (spray, jet, needle, etc.). 【Features】 - No need for thermal curing processes - Contributes to the reduction of fossil fuels and carbon dioxide - Long-term durability - Complies with various regulations - Not classified under UNNo. - Easy to apply (approximately 100–1000 m·Pa) For more details, please download the materials or feel free to contact us with any questions.

• Coating Agent

We have developed a "solvent-free UV-curable conformal coating" that "protects" electronic circuit boards from water, humidity, and corrosive gases. It cures instantly with UV light, significantly reducing production man-hours. Being solvent-free also contributes to VOC measures within the factory. It demonstrates its effectiveness as a countermeasure against equipment failures in harsh environments or near the sea. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive electronics, and it complies with international standards (IPC-CC-830). It is compatible with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No need for thermal curing process ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not classified under UNNo. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

• Coating Agent

Leveraging our long-standing expertise in the conformal coating market, we have developed a "solvent-free UV-curable conformal coating" that "protects" electronic substrates. It cures instantly with UV light, significantly reducing production labor hours. Being solvent-free also contributes to VOC measures within the factory. By switching from thermal drying processes to UV, we greatly contribute to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and offers superior long-term durability compared to conventional coatings for automotive electronics, and it complies with international standards (IPC-CC-830). It is compatible with various dispensers (spray, jet, needle, etc.). 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Complies with various regulations ■ Not subject to UNNo. ■ Easy to apply (approximately 100–1000 m·Pa) ★ For more details, please download the materials or feel free to contact us with any questions.

• Charger

We have developed a "Fluorinated Conformal Coating" that provides "moisture-proof and insulation protection" for electronic substrates, leveraging our long-standing expertise in fluoropolymer polymerization technology and insights from the conformal coating market. Conventional organic solvent-based coatings require a thermal drying and curing process after application due to their boiling points ranging from 100°C to 130°C. Our "Fluorinated Conformal Coating" utilizes low-boiling fluorinated solvents, allowing for room temperature drying, thereby eliminating the need for thermal drying processes and significantly contributing to the reduction of fossil fuel usage and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and offers superior long-term durability compared to traditional coatings for automotive applications, meeting international standards (IPC-CC-830). To accommodate users' specific requests, such as reducing drying time and controlling coating thickness, we also offer a range of products with varying concentrations. 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Exempt from fire safety regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

Are you troubled by salt damage and corrosion of steel and iron materials? Our reaction-curing type anti-contamination clear coat is ideal for outdoor salt damage prevention and for preventing water accumulation on bridges! This is a room temperature curing clear coat that incorporates a uniquely developed fluorine additive. It has undergone accelerated weather resistance testing for 3000 hours with no change in appearance. It also has water-repellent properties, making it effective in preventing water accumulation from rain and seawater. Since the fluorine additive cures together with the paint, the fluorine components do not come off even when wiped with water, oil, or chemicals. This maintains water-repellent, oil-repellent, and rust prevention properties over a long period, preventing paint stains, peeling, and corrosion. 【Features】 ■ Room temperature curing type, no heating furnace required: Suitable for painting large items and existing components ■ Unique fluorine additive formulation: Repels oil with the power of fluorine, making it easy to remove oil stains ■ Chemical resistance: Effective against oil stains from machine oils and cutting oils, as well as solvent-based substances ■ Acid and alkali resistance: Strong reaction-curing type that exhibits resistance to acids and alkalis ■ High weather resistance: Suitable for outdoor use ■ Corrosion resistance: Ideal for corrosion-resistant coatings on outdoor structures *For more details, please download the PDF or feel free to contact us.

• Coating Agent

The high-performance fluorine-based clear coat agent "Shields" series is an excellent fluorine-based clear coat that prevents contamination and damage, as well as corrosion. Thanks to the unique development of fluorine additives, it strongly repels not only water but also oil, making it difficult for both water-based and oil-based stains to adhere and easy to wipe off, thus exhibiting excellent stain resistance. Additionally, since the fluorine additives cure together with the paint, the fluorine components do not detach even when wiped with chemicals, maintaining very high chemical resistance against organic solvents, acids, and alkalis. A new "antibacterial specification" has been introduced in the Shields series, and it is now possible to "tint" to various colors. * UV protection and adjustments to the level of matte finish are also available. The tack-free time (touch dry) is 5 to 30 minutes, with options for curing at 70-80°C, 120-150°C, and room temperature. We offer a wide range of options tailored to the target object, painting method, and curing conditions. 【Perfect for these concerns】 - Commercial paints cannot protect the substrate - Want to repel water and oil - Rust occurs and causes corrosion - Want to clean fingerprint stains - Paint film peels off due to chemicals, etc.

• Coating Agent

Our company manufactures and sells fluorinated conformal coatings. Conventional organic solvent-based coatings require a thermal drying and curing process after application due to their boiling points of 100°C to 130°C. Our "fluorinated conformal coating" utilizes low-boiling fluorinated solvents, allowing for room temperature drying, thereby eliminating the thermal drying process and significantly contributing to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has excellent long-term durability compared to conventional coatings, with safety guaranteed by international standards. To meet users' specific requests, such as reducing drying time and controlling coating thickness, we offer a range of products with varying concentrations. 【Features】 ■ No thermal curing process required ■ Precise application possible with dispensers ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Not subject to fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

Leveraging the fluororesin polymerization technology we have cultivated over many years, as well as our insights in the conformal coating market, we have developed a 'Fluorine Conformal Coating' that provides "moisture-proof and insulation protection" for automotive electronic substrates. Conventional organic solvent-based coatings require a thermal drying and curing process after application due to their boiling points of 100°C to 130°C. Our 'Fluorine Conformal Coating' uses low-boiling fluorinated solvents, allowing for room temperature drying, thus eliminating the thermal drying process and significantly contributing to the reduction of fossil fuel use and carbon dioxide emissions. Additionally, it is more resistant to temperature changes and has superior long-term durability compared to conventional coatings for automotive applications, with safety guaranteed by international standards. To meet the detailed requests of users, such as reducing drying time and controlling film thickness, we offer a range of products with varying concentrations. 【Features】 ■ No thermal curing process required ■ Contributes to the reduction of fossil fuels and carbon dioxide ■ Long-term durability ■ Compliance with various regulations ■ Exempt from fire service law regulations ★ For more details, please download the materials or feel free to contact us with any questions.

• Composite Materials

Leveraging the fluororesin polymerization technology we have cultivated over many years, as well as our expertise in the conformal coating market, we have developed a fluorine conformal coating suitable for automotive electronic substrates. It can also be used for applications beyond automotive substrates (such as in aircraft, robots, and industrial equipment). For automotive applications, it offers superior durability and high safety compared to conventional heat-drying curing conformal coatings. Since it is not subject to fire safety regulations, it is a product that can be easily introduced even as a new option. Additionally, due to the special fluorine solvent, it can dry at room temperature, eliminating the need for heat-drying curing processes and contributing to SDGs. It is also highly compatible with automatic coating machines (masking-less dispensers, primarily film coaters and jet dispensers), allowing for precise application without waste. To meet users' detailed requests, such as reducing drying time and controlling coating thickness, we offer a lineup of multiple products with varying concentrations. There are also options with fluorescent agents, allowing for verification of the coated areas under black light! ★ For more details, please download the materials. If you have any questions, feel free to consult us.

• Composite Materials

Are there any complaints from users regarding the susceptibility of our products (machines and parts) to dirt and corrosion? This is a clear coat agent formulated with a proprietary fluorine additive. It is a reaction-curing type fluorine-based clear coat that repels dirt with the power of fluorine, making it an ideal product for preventing paint peeling and dirt accumulation! Since the fluorine additive cures together with the coating agent, the fluorine components do not come off even when wiped with water, oil, or chemicals. This maintains water and oil repellency and rust resistance over a long period, preventing paint dirt, peeling, and corrosion. There are both room temperature curing and heat curing types available. 【Features】 ■ Room temperature curing type, no heating furnace required: Suitable for painting large items and existing materials ■ Unique fluorine additive formulation: Repels oil with the power of fluorine, making it easy to remove oil stains ■ Chemical resistance: Effective against oil stains from machine oils and cutting oils, as well as solvent-based substances ■ Acid and alkali resistance: Strong reaction-curing type that exhibits resistance to acids and alkalis ■ High weather resistance: Suitable for outdoor use ■ Corrosion resistance: Ideal for corrosion-resistant coatings for outdoor structures ☆ If you have any inquiries regarding new development projects, please feel free to contact us.

• Rust Inhibitor

By incorporating a uniquely developed fluorine additive, it demonstrates excellent chemical resistance, exhibiting strong resistance to solvents such as alcohols and ketones, as well as acids and alkalis. Furthermore, it shows strong resistance to everyday stains, including hair color, ink, Tabasco sauce, and detergents. Additionally, the power of fluorine allows for easy wiping of dirt. We also offer a one-component type that is easy to handle. It is suitable for substrates that can undergo high-temperature curing, such as metals and glass. *For more details, please refer to the PDF materials or feel free to contact us.

• Rust Inhibitor

It is possible to cure at low temperatures and for short periods, making it suitable for resin molded products. By incorporating a uniquely developed fluororesin, it exhibits high dirt resistance and water and oil repellency. It protects parts that may come into contact with substances like sunscreen, cosmetics, and hand creams from whitening and swelling. Manufacturers of automotive interior parts and home appliances and electronics, which are often directly touched with hands that have cream or similar substances on them, are currently testing it for potential adoption.

• Rust Inhibitor

This is an ideal coating agent for countering paint peeling caused by water-based cutting oils and similar substances. It eliminates the hassle of repainting. It is a room temperature curing type that does not require a heating furnace, making it suitable for painting large items and existing components. With a unique fluorine additive formulation, it repels oil and allows for easy removal of oil stains. It is also effective against oily contaminants such as machine oil and cutting oil. It has excellent acid and alkali resistance, high weather resistance, and corrosion resistance, making it suitable for corrosion-resistant coatings on outdoor structures. 【Features】 ■ Water and oil repellent ■ Stains can be easily wiped off ■ Excellent adhesion ■ Weather and heat resistance ■ High corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

• Rust Inhibitor

It can be heat-cured at low temperatures and for short periods, making it suitable for resin molded products. By incorporating a uniquely developed fluororesin, it exhibits high dirt resistance and water and oil repellency. It protects parts that may come into contact with substances like sunscreen, cosmetics, and hand creams from whitening and swelling. Manufacturers of automotive interior parts and home appliances and electronics, who often directly handle these parts with hands that have cream or similar substances on them, are currently conducting tests for adoption.

• Rust Inhibitor

The Shields series is a fluorine-based clear coat that excels in contamination/damage prevention and corrosion resistance. Thanks to the unique fluorine additive "Fluoripel," it effectively repels not only water but also oil. It is resistant to water-based and oil-based stains, making it easy to wipe off and highly resistant to contamination. This fluorine additive cures together with the paint, so even when wiped with chemicals, the fluorine components do not come off. As a result, it has very high chemical resistance to organic solvents, acids, and alkalis. With a primer-less (one coat) application, it offers high adhesion to various metals and resins. There are also products compatible with aluminum and SUS. The lineup includes options for tack-free time (touch dry) of 5 to 30 minutes at room temperature, as well as curing at 70 to 80°C and 120 to 150°C. We will propose a wide range of options tailored to the target object, painting method, and curing conditions.

• Coating Agent

The Shields series is a fluorine-based clear coat that excels in contamination/damage prevention and corrosion resistance. Thanks to the unique fluorine additive "Fluoripel," it repels not only water but also oil effectively. It is resistant to water-based and oil-based stains, making it easy to wipe off and providing excellent stain resistance. This fluorine additive cures together with the paint, ensuring that the fluorine components do not come off even when wiped with chemicals. As a result, it has very high chemical resistance to organic solvents, acids, and alkalis. With a primer-less (one coat) application, it has high adhesion to various metals and resins. There are also products compatible with aluminum and SUS. There is a lineup for tack-free time (touch dry) curing at room temperature for 5 to 30 minutes, as well as curing at 70 to 80°C and 120 to 150°C. We offer a wide range of options tailored to the target object, painting method, and curing conditions.

• Coating Agent

In recent years, there has been a significant increase in customers seeking protective coatings (conformal coatings) for electronic substrates and components, aimed at improving reliability such as "moisture resistance," "rust prevention," and "migration prevention." On the other hand, from the producer's side, there are many concerns such as: - Lack of experience in coating processing. - No equipment available for coating when specifications are suddenly provided. - Insufficient expected quantities to justify capital investment in equipment. To address these issues faced by such customers, the Noda Screen Chemical Products Division offers a coating processing service targeting prototype and small-scale production using our products (fluorine coating agents).

• Circuit board design and manufacturing

The "PCH Series" is a sulfurization prevention coating agent that protects metals such as Ag and Cu from corrosive gases. This product has a colorless and transparent film, so the total light transmittance does not decrease even after application. To evaluate gas corrosion resistance, we conducted gas corrosion tests to confirm the maintenance rate of glossiness before and after the test. The results are detailed with comparative images of the silver plate, which is the substrate used, in its pre-test, uncoated state, and after the application of this product. 【Features】 ■ Sulfurization resistance ■ Adhesion ■ Rust prevention ■ Transparency ■ Room temperature drying *Our products comply with the new REACH PFOA regulations and can be used without any issues. Please feel free to contact us, as we have 10 years of experience and achievements in PFOA countermeasures.

• Coating Agent

■ Strongly protects electronic components and circuit boards from humidity, condensation, rust, and oil with high water and oil repellency of fluorine. ■ Prevents sulfide formation of silver and copper with excellent sulfur resistance of the fluorine coating. ■ The transparent coating allows for direct application on LED mounted boards while maintaining their brightness. ■ Adheres well to various substrates (glass epoxy, resist, copper foil, SUS, etc.). ■ Uses a special fluorine solvent, allowing for drying at room temperature without the need for forced drying. ■ Can be applied using dispensers, brushes, dipping, or spraying. ■ Not classified as hazardous materials under fire safety laws, ensuring high safety and eliminating the need for explosion-proof equipment or hazardous material storage.

• Coating Agent