ニューストロング List of Products and Services

It is convenient for picking up screws and small items that have fallen into narrow spaces. It is easy to extend and convenient to carry.

• Other cutting tools

It is convenient for picking up screws and small items that have fallen into narrow spaces. The MSB-150 comes in a plastic case. It is easy to extend and convenient to carry.

• Other cutting tools

The collected chips and sludge can be processed simply by removing the cover of the main unit. The main unit has a blade-like shape, providing a wide adsorption area, and the circulating oil swirls, efficiently attracting iron powder. Since it does not come into direct contact with the chips or iron powder, it can be processed safely and without getting dirty. It is installed in the machine's water and oil tank, using magnetic force to attract the chips.

• Other cutting tools

It can be installed in the oil tanks and water tanks of machine tools such as machining centers to absorb and remove chips and sludge. It can also be used in the processing tanks of wire cutting and electrical discharge machines. Removing chips and sludge is easy. The ion exchange resin and filter last a long time, contributing to cost reduction and environmental issues.

• Other cutting tools

You can perform demagnetizing cleaning with hand operation. It is made of stainless steel, so it can be used in water and has a structure that is resistant to rust. The bottom surface also adheres, and by moving the position of the guard stopper, it can accommodate deep holes.

• Other cutting tools

It is ideal for processing thin non-ferrous metals when combined with an air generator (utilizing the air pressure of a compressor without the need for a vacuum pump). If you are using a plate, a vacuum generator will be required. The standard plates are sized to be set in a machine vice. They can be directly set on the machine bed. Sizes other than the standard will be made to order.

• Other cutting tools

No vacuum pump is needed; it utilizes the air pressure from the compressor. It is ideal for processing thin non-ferrous metals when combined with a suction plate. Manual operation is possible in vacuum chuck processing. Air flow adjustment is possible.

• Other cutting tools

You can use it with a set of Neolon cord and silicone cord.

• Other cutting tools

You can secure it to the machine table using the U groove.

• Other cutting tools

You can securely fix multiple hard-to-secure workpieces in a compact plate at distant locations. It does not require a vacuum pump and utilizes the air pressure from a compressor. It is ideal for processing thin non-ferrous metals when combined with a suction plate. Hand operation is possible in vacuum chuck processing. Air flow adjustment is available.

• Other cutting tools

Our original vacuum chuck adjustable stopper can be used freely in the grooves of the suction plate.

• Other cutting tools

Please clean the bottom surface when attaching it to the suction chuck boy. You can use it by placing it in the vice and lightly tightening the vice clamp plate.

• Other cutting tools

It is used for suction chuck boys. It is resistant to oil, heat, etc., and is durable. It has a size of φ4.

• Other cutting tools

This is a standard product. It is very soft with a sponge seal cord but is weak against heat. It comes in sizes φ3 and φ4. It is used for suction chuck boys.

• Other cutting tools

Compressed air from the compressor in the factory can be utilized, so a vacuum pump is not necessary. Drilling can be done using a sub-plate. It has key grooves on the bottom surface, ensuring accurate parallelism and perpendicularity. It is convenient for finishing the top and bottom surfaces with grinding.

• Other cutting tools

The setup for processing will become smoother.

• Other cutting tools

This is a joint spacer for a multi-jack. It can be used as a dedicated tool.

• Other cutting tools

Stable positioning or fixing for vertical or horizontal machines using screws at the bottom of the main body.

• Other cutting tools

This is a holder specifically for jig support. The support can be mounted in any location.

• Other cutting tools

It can be used for types with screw holes such as sub-tables and jig blocks, as well as bushing types.

• Other cutting tools

It has a built-in spring, which improves the efficiency of clamping work.

• Other cutting tools

This is a dedicated stand used as a fixture incorporated into sub-tables and jig blocks for MC, combined with a hook clamp to clamp the workpiece.

• Other cutting tools

It has a built-in spring, and if you loosen it, the toes will automatically rise.

• Other cutting tools

It has a built-in spring, and if you loosen it, the toes will automatically rise.

• Other cutting tools

It has a built-in spring, and if you loosen it, the toe will automatically rise.

• Other cutting tools

During clamping, it moves diagonally at a 45-degree angle to suppress the lifting of the workpiece. The setup for processing becomes smoother.

• Other cutting tools

The graduated angle plate allows for quick angle setting. It can also be used as a V-block. Fine adjustments to the angle can be made by turning the setup screw on the side.

• Other cutting tools

It is compatible with round bars from φ5 to φ70. It has undergone sub-zero treatment, resulting in minimal aging changes. It allows for simultaneous processing of two pieces with high precision (with arrows for pair confirmation).

• Other cutting tools

The V groove is finished at 90° and can be used for simple inspection of cylinders and marking of round bars. It comes as a set of two and is manufactured as a single piece. It can securely hold round workpieces and is suitable for a wide range of applications.

• Other cutting tools

The V groove is finished at 90° and can be used for simple inspections of cylinders and marking of round bars. It comes as a set of two, with integrated processing. It can fix round workpieces and is suitable for a wide range of applications.

• Other cutting tools

This is a versatile beta scale that can be used in multiple ways and allows for precision machining.

• Other cutting tools

The MC palette integrated jig is a versatile setting block that can be used widely for various applications such as parallel plates, measurements, and marking. The presence of bushings allows for extensive usage.

• Other cutting tools

The MC palette integrated jig is a versatile setting block that can be widely used for parallel plates, measurements, marking, and more.

• Other cutting tools

Prevents chips and cutting oil from accumulating in unused holes during work with sub-plates and block screw hole types.

• Other cutting tools

For horizontal blocks (bushing type), this screw type is recommended.

• Other cutting tools

The standard jig can be quickly positioned due to the T-slot. The T-slot allows for quick setup using the standard jig.

• Other cutting tools

The bushing-type sub-table for MC is processed with high precision, and the repeat assembly accuracy of the parts is outstanding.

• Other cutting tools

The mounting surface of the subplate can be manufactured in-house using a dedicated jig. It is an ideal subtable for processing jigs for NC and MC machines. It can be produced in-house as a dedicated jig.

• Other cutting tools

We will manufacture it according to your preferred dimensions, making the processing setup simple and convenient. It will be made to order.

• Other cutting tools

This is a base plate for tap holes. It can be accurately positioned based on any reference point. Since there are multiple tap holes, you can take a reference from anywhere. By using the separately sold hole cap, it prevents chips from getting in.

• Other cutting tools

There will be some leeway in the Z stroke. Standard jigs can be quickly installed for the T-slot. By using the T-slot, setup can be done quickly with standard jigs.

• Other cutting tools

It can be used as a preferred dedicated jig for positioning large workpieces. It is convenient for positioning and parallel alignment of large workpieces. It has M12 or M16 tapped holes.

• Other cutting tools

It can be used as a preferred dedicated jig for positioning large workpieces. It is convenient for positioning and parallel alignment of large workpieces.

• Other cutting tools

The cross T grooves allow for clamping from any direction. Irregularly shaped workpieces can also be clamped.

• Other cutting tools

Inserting M12 or M16 bushings and helicoils. The pitch area is also finished precisely. Since it is a bushing type, it can be used as a dedicated tool.

• Other cutting tools