ニューストロング Product Lineup

It is used as support for processed black leather and can be used for various purposes.

• Other cutting tools

It is used as support for processed black leather and can be used for various applications.

• Other cutting tools

The tip always rotates.

• Other cutting tools

It can be used for large screw supports and magnesium jacks.

• Other cutting tools

Prevents misalignment when using stacked screw supports.

• Other cutting tools

It is used when the area of the top surface of the screw support is small. It is used when the width of the holding clamp is wider than the receptacle of the screw support.

• Other cutting tools

Bearing allows for easier height adjustment of the workpiece in its processed state due to the internal structure.

• Other cutting tools

Supports machined parts with a slope. Fits black steel and castings at three contact points. Reduces distortion caused by clamping.

• Other cutting tools

It is ideal for preventing vibration in thin or small workpieces. It comes with a convenient lock nut. The swivel head accommodates warping of the workpiece.

• Other cutting tools

The tip is fitted with a hard ball, making it less likely to crush and difficult to bite into.

• Other cutting tools

You can easily tighten the screw support. It is essential for the screw support.

• Other cutting tools

It demonstrates its capabilities on two-sided and four-sided blocks. Once set, it does not move due to magnetic force. You can attach and detach objects on a flat surface without changing the reference height.

• Other cutting tools

It is a support for clamps and workpieces. It can be used for height positioning, etc. Height adjustment of the workpiece.

• Other cutting tools

It is a support for the clamp. It is convenient for height adjustment. Please check that the clamp is not tilted up and down or side to side. Be careful not to pinch chips or other debris during setup, as it can make it difficult to achieve parallelism.

• Other cutting tools

The jig bed for the horizontal MC can be sufficiently mounted on blocks as well. All racks are standardized and designed to interlock regardless of whether they are combined from 1S to 9S. The pitch is fine-tuned to maintain the parallelism of the clamps for any shape of workpiece.

• Other cutting tools

All racks are standardized and designed to interlock regardless of the combination from 1S to 9S. The pitch is finely adjusted to maintain the parallelism of the clamps for any shape of workpiece.

• Other cutting tools

Horizontal mounting is a prerequisite for the setting of processed items. The range and angle of 90° are flexible. The rotation range is 360°. It adapts to any surface roughness. The operation is smooth. It has a strong load capacity.

• Other cutting tools

It has a built-in spring that allows for easy height adjustment. The support part is raised by the force of the spring, making it easy to accommodate warping for each workpiece. By securing it with bolts, it prevents vibration and shifting.

• Other cutting tools

Please use it for clamping round holes, recesses, and U-shaped parts.

• Other cutting tools

It completely secures the work without resisting any angle.

• Other cutting tools

Swivels are included at both ends of the clamp surface to prevent damage to the machine bed. The swivels are plated, so they won't damage the workpiece. Due to the large contact surface of the clamp, the clamping force is increased, providing stable tightening force (with tightening bolts and flange nuts included).

• Other cutting tools

By using the reset bolt and clamp support, you can loosen the nut and shift the main body left and right, allowing for smooth attachment and detachment of the workpiece.

• Other cutting tools

Please use it for clamping workpieces of irregular shapes. Using it in combination with a swivel bolt will improve the efficiency of the clamping operation.

• Other cutting tools

Set the receiving bolt in the screw hole at the rear for use. Please use it for clamping workpieces, milling machines, machining centers, and radial drilling machines.

• Other cutting tools

It can be used to secure the work.

• Other cutting tools

Please use it for machining, milling, drill presses, etc.

• Other cutting tools

When the workpiece is clamped, the tightening position of the nut is lower. The clamp is in a Z shape, so the tightening nut does not protrude. Since the clamp is in a Z shape and the set bolt hole is long, there is room for adjustment.

• Other cutting tools

This is a forged clamp. It is a strong and powerful clamp that will never break. Please use it for pressing molds of 100 tons and above, as well as for ordinary machining presses.

• Other cutting tools

Strong clamping is possible. It can be used for press die holding. It can be used for holding molds and heavy objects during processing. It can be used for holding workpieces during machining and similar processes.

• Other cutting tools

Includes bolts, nuts, T-nuts, clamps, and screws with receiving threads.

• Other cutting tools

The part of the rack interlocks with any block and can be used with clamps, etc.

• Other cutting tools

You can quickly adjust the height by using the step block.

• Other cutting tools

Please use it for securing workpieces on milling machines, machining centers, radial drill presses, etc. It is ideal for clamping operations.

• Other cutting tools

For bolts and nuts fixed to T-slots. After the clamping is finished, when additional clamping locations arise.

• Other cutting tools

Fix bolts to the groove table of machines such as milling machines, machining centers, grinders, and radial drilling machines.

• Other cutting tools

Fix bolts to the groove table of milling machines, machining centers, grinders, radial drilling machines, etc.

• Other cutting tools

It is used for securing workpieces on milling machines and drill presses. It is used for bolt fixation for T-slots.

• Other cutting tools

Please set it between the clamp and the nut for use.

• Other cutting tools

It is a low-height nut. It is ideal for preventing loosening.

• Other cutting tools

It is a low-height nut. It is ideal for preventing loosening.

• Other cutting tools

Used in combination with flat washers on stud bolts.

• Other cutting tools

Used in conjunction with flat washers on stud bolts.

• Other cutting tools

It is ideal for workpiece fixation on milling machines, machining centers, and radial drilling machines. It prevents scratches on the clamps.

• Other cutting tools

It is used when extending bolts. When connecting bolts, please do so at the center of the nut. Do not overtighten.

• Other cutting tools

This is used when extending bolts. When connecting bolts, please do so at the center of the nut. Do not overtighten.

• Other cutting tools