ニューストロング Product Lineup

This is used when extending bolts. When connecting bolts, please do so at the center of the nut. Do not over-tighten.

• Other cutting tools

It is ideal for tightening clamps that are at an angle. Washers are not required. It can tighten all types of clamps. It is perfect for tightening the main body of the jig.

• Other cutting tools

It is ideal for tightening clamps that are at an angle. No washers are needed. It can tighten all types of clamps. It is perfect for tightening the main body of the jig.

• Other cutting tools

A base plate is not required. It is possible to tighten all types of clamps. It is ideal for tightening the main body of the jig.

• Other cutting tools

A base plate is not required. It is possible to tighten all types of clamps. It is ideal for tightening the main body of the jig.

• Other cutting tools

It is preset to the specified torque value for the strong nut, so no adjustment is necessary. It can also be used with strong washers.

• Other cutting tools

Tightening work of the jig body. Tightening of various molds. Tightening of the press mold.

• Other cutting tools

Due to the built-in bearings, a large torque can be obtained with a small force. The tightening force is about 40% of the conventional force. It can be loosened with about 30% of the force. For tightening work on the main body of the jig. Tightening of various molds. Tightening of press molds.

• Other cutting tools

It is used during clamping. SCM material is used.

• Other cutting tools

This is a fully threaded bolt measuring 10,000 mm. It allows for easy length adjustment. It can be used for fastening and installation in light work, as well as for various other purposes.

• Other cutting tools

The bolt and T-nut are integrated as a forged product. It is ideal for press die holding and allows for strong tightening.

• Other cutting tools

When the screw on the tightening side has fatigued, it can be used on the T-nut side. The lengths of the screws are different on the left and right sides.

• Other cutting tools

There are threads cut on both ends. When the screw on the tightening side is fatigued, it can be used on the T-nut side.

• Other cutting tools

There are threads cut on both ends. When the screw on the tightening side is fatigued, it can be used on the T-nut side.

• Other cutting tools

A plain clamp and screw support are set. This is a standard clamp tool set for the basic model. The processing width is expanded. It will reduce time.

• Other cutting tools

A screw support, screw support tip, and wrench are included. This is a basic standard clamp tool set. It expands the processing width. It reduces time.

• Other cutting tools

This is a very convenient T-slot nut and stud set for streamlining processing work. It comes with a wooden base that includes bolts, T-slot nuts, flange nuts, and coupling nuts. The first two digits represent the T-slot width (mm), and the last two digits represent the screw diameter (mm). It expands the processing width and reduces time.

• Other cutting tools

This is a very convenient clamping kit for streamlining work related to the installation of processed materials. It includes bolts, nuts, clamps, and blocks. It is a basic standard clamp tool set. The first two digits represent the T-slot width (mm), and the last two digits represent the screw diameter used (mm). It expands the processing width and reduces time.

• Other cutting tools

Having one set per MC1 machine is convenient for clamping workpieces. It includes bolts, nuts, clamps, and screw supports. This is a standard clamp tool set of the basic type. The first two digits indicate the T-slot width (mm), and the last two digits indicate the screw diameter (mm). It expands the processing width. It reduces time.

• Processing Jig
• Other cutting tools

This is a very convenient clamping set for the installation of processed materials and work rationalization. It includes the bolts, nuts, step clamps, and step blocks necessary for setting up. The first two digits represent the T-slot width (mm), and the last two digits represent the screw diameter (mm). It expands the processing width and reduces time.

• Other cutting tools

The "Magnetic Cleaning Rod / Handle Boy" can attract and remove sludge that settles in the cutting oil tank of machine tools using magnetic force. It reduces the risks of pump failures, clogging of injection nozzles, rust, and cutting oil deterioration caused by sludge. Additionally, we offer tools such as the "Magnetic Tool" for picking up screws and small items in tight spaces, as well as "Mirror Bar" and "Magnet Tupper." 【Features】 <Magnetic Cleaning Rod MSP> ■ Attracts settled and floating sludge ■ Removal method: Pulling the grip causes the chips to fall ■ Magnetic force: 3700 Gauss (Neodymium) <Handle Boy MSR-100> ■ For dirty tanks of grinding machines and drill grinders ■ Removal method: Loosening the left and right screws and removing the cover causes the chips to fall ■ Magnetic force: 1500 Gauss (Ferrite) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Ganchakku Bozu" is an ultra-thin scroll four-jaw chuck designed for MC use. It can securely clamp workpieces with high precision. Due to its very thin body, it allows for a larger machining tolerance, improving work efficiency. By setting step keys in the two key grooves on the bottom, you can achieve uniform machining with multiple chucks. 【Features】 ■ Can be set in parallel with multiple units on the machine table ■ Very easy to tighten and loosen workpieces ■ The very thin body increases machining tolerance and improves work efficiency ■ Setting on the table is very simple and quick, just by clamping ■ Can clamp square workpieces due to the four-jaw design *For more details, please refer to the PDF document or feel free to contact us.

• Chuck

We would like to introduce the "Work Support Series" that we handle. The "Flat Type" tilts according to the shape of the workpiece at the top, which helps to reduce deformation of the workpiece caused by clamping. The "Round Type" is suitable for preventing vibrations that occur during machining and milling processes. When using our products, utilizing connecting fittings for screw supports allows for stable operation. 【WS-45/WS-4575 Features】 ■ Clamping that conforms to the shape of the workpiece ■ Stable support on uneven surfaces due to three-point support ■ Well-suited for supporting warped workpieces ■ Allows for height-utilized settings (WS-4575) *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Vice Clamps

The "Magnet Storage Series" can be easily installed with magnets and allows for neat storage of cleaning tools and more. If you want to store a lot of items, please use the "Tool Holder 5 with Hooks." If you want to utilize gaps for storage, please use the "Tool Holder 3 with Hooks." Additionally, we also offer a "Tool Holder" that can be quickly stored anywhere. 【Features】 ■ The hooks are foldable ■ Easy installation with magnets ■ Allows for neat storage of cleaning tools and more *For more details, please refer to the PDF document or feel free to contact us.

• Storage

The "Strong Nut" is a product that allows for high torque with minimal force due to its built-in ball bearings. The force required for tightening is usually less than half that of a standard nut. Since the bottom surface of the nut does not move, washers and clamps are not damaged. We also offer the "Strong Washer," which is used set between the nut and the clamp, and the "Strong Ratchet Torque Wrench," which is suitable for torque management of the Strong Nut. 【Features】 ■ Built-in ball bearings ■ The force required for tightening is usually less than half that of a standard nut ■ The bottom surface of the nut does not move, preventing damage to washers and clamps ■ Bearings absorb vibrations, preventing loosening *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• nut
• Torque wrench

"Kakudas-kun" is a product that allows you to easily set angles with the vice you are currently using. There are two types of angle settings: manual (APM) and fine adjustment (AP). It can be used for end mill processing, face mill processing, drilling, and grinding. Additionally, we also offer a "rolling type knurling holder" that allows for easy center height adjustment by aligning the top surface of the shank with the center of the workpiece. 【Features】 ■ Angle settings are available in two types: manual (APM) and fine adjustment (AP) ■ Can also be used as a V-block to take advantage of its precision ■ Set angles using the adjustment bolt on the side *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig
• Other work tools

This catalog features a wide range of products from News Strong Co., Ltd., which handles various clamping devices, vacuum chucks, magnetic products, and more. Included in the lineup is the "Keyless Drill Chuck," which utilizes titanium-coated jaws for improved wear resistance, as well as the "Magnet Base" and "Precision Vice," which allow for magnetic ON/OFF functionality. You can purchase the products you use regularly at a more affordable price. 【Featured Products (Excerpt)】 ■ Keyless Drill Chuck ・KDCJ-13JT6 ■ Magnet Base ・MB-8D ・MB-8DTHS ■ Hex Wrench Set ・WLHR-146 *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig
• Chuck
• Tool Sets

At News Strong Co., Ltd., we specialize in the manufacturing of jigs and have developed our technology to carry out "custom production of large sub-tables and special scales." Our products focus on large items and special shapes that are not included in standard specifications for sub-tables, flat plates, and two-sided or four-sided scales used in machine tools, and we manufacture them based on customer requests. By managing everything from material procurement to completion in a consistent manner, we have reduced indirect management and transportation costs between processes, enabling shorter delivery times and improved quality control. Additionally, by collaborating with companies that have been manufacturing key components for ships, dedicated machines, and machine tools for many years, we can accommodate not only products for machine tools but also contract processing of large components across various fields. 【Features】 ■ Fully original customization ■ Capacity up to 50 tons ■ Short delivery times ■ Cost reduction through integrated production ■ Reliable high-precision quality *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing
• Other contract services

The "Suction Chuck Boy" is a vacuum chuck that powerfully clamps workpieces using the force of vacuum. The "integrated type," suitable for thin workpieces and non-ferrous metal processing, has a built-in vacuum generator, allowing it to be used simply by connecting it to a compressor. In addition, we offer a "separated type," where the vacuum generator and suction plate are separate, and an "octopus type," which can be freely arranged according to the size and shape of the workpiece. 【Features】 ■ No restrictions on workpiece material ■ Easy to introduce ■ Minimal vibration occurrence ■ Significantly reduces workpiece loading and unloading time ■ Compatible with various machine tools *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig
• Chuck

The coupling nuts are made of S45C material, with a hardness of HRC 25-30°, finished with black dye, and come in a box of 10. Sizes available include three inch sizes: 12, 58, and 34-CN; eleven standard sizes: 8, 10, 12, 14, 16, 18, 20, 22, 24, 30, and 36M-CN; and nine large sizes: 8, 10, 12, 14, 16, 18, 20, 22, and 24M-CNL. 【Features】 ○ Material: S45C ○ Hardness: HRC 25-30° ○ Finish: Black dye ○ 10 pieces per box For more details, please contact us or download the catalog.

• nut