ケイユー産業 Product Lineup

【Problem】"Are you struggling with the profitability of mass production lines due to the inability to keep up with the rapidly increasing demand and the skyrocketing electricity costs and air consumption when increasing production speed?" 【Affinity】In environments where production in the millions is required, such as for beverages, cooking oils, and detergent containers, even a slight reduction in cycle time or differences in energy efficiency can significantly impact annual operating profits. 【Solution】CHUMPOWER's "L Series" is a high-speed linear PET two-axis stretch blow molding machine designed to overcome these mass production challenges. 【Offer】Boasting an overwhelming production speed of up to 12,000 BPH, it features a unique air recovery system that dramatically reduces the load on the compressor and power consumption by reusing the high-pressure air used in the blow molding process. 【Narrow down】It has a proven track record with many installations at major mineral water manufacturers in Japan, demonstrating stability under harsh continuous operation conditions. 【Action】If you are considering updating your existing line or significantly increasing production, why not start with a cost-effectiveness simulation? Please feel free to contact us.

• Blow Molding Machine
• Resin processing machine
• Filling and bottling machines

【Problem】Are you struggling with wanting to produce small lots of containers or prototype new products, but finding that "the initial cost of introducing dedicated machinery is too high" or "there's no space in the factory for new machines"? 【Affinity】As the demand for small-batch, diverse production increases, large and expensive equipment poses a high barrier to investment recovery and takes away the flexibility of production lines. 【Solution】The "PK-42HS," which has numerous achievements in Japan, is a compact direct blow molding machine that achieves an overwhelming low price. Its greatest feature is its extremely compact design, with a width of only 1.0m (1060mm). It can be installed in a small amount of available space, minimizing changes to the factory layout. 【Offer】Compatible with PE and PP materials, it specializes in the production of small containers ranging from 20 to 200ml. It can be introduced at a low cost, making it not only excellent as a mass production machine but also as a testing and prototyping machine for development departments. 【Narrow down & Action】Because it is the "PARKER" brand with numerous domestic achievements, its quality and stability are guaranteed even at a low price. For more details and demonstrations of this cost-effective machine, please feel free to contact us.

• Blow Molding Machine

Our cooling water purification system is designed to maximize the efficiency and lifespan of equipment. It removes impurities and dirt contained in the cooling water with high precision, reducing the risk of equipment failure. It simplifies regular maintenance and contributes to lowering running costs. With clean cooling water, it supports stable operation of equipment and leads to improved productivity for businesses.

• Pure water production equipment

A versatile small machine that can mold not only PET but also PP and PE. It saves space, so you won't have trouble finding a place for it!

• Blow Molding Machine

AOI is an automated optical inspection method. The "Automated Optical CCD Camera Inspection Machine (AOI)" uses a high-resolution camera system with different light sources such as fluorescence, ultraviolet, LED, and infrared to capture continuous images. These images are then processed and presented to engineers with potential defects. It is a model that can inspect a full 360 degrees with 4 to 6 cameras on the sides and one camera each on the top and bottom. It is mainly suitable for inspecting containers. 【Specifications】 ■ High-speed detection capability: Up to 1 PCS/second (2M) ■ Identifies defects through AI learning ■ Adjustable detection area: Detection area from 2mm² to 200mm² ■ Inspection camera: Uses high-speed cameras ranging from 2M to 25M. ■ Detection accuracy lens: Resolution from 0.001mm to 0.05mm ■ Measurement capability: 2M at 60 frames/second or 5M at 4 frames/second. ■ Automatic data sorting: Images are automatically sorted into folders, and file names are automatically populated with the date and time. ■ Real-time measurement graph: Capable of displaying the latest 1000 data points for each location.

• Visual Inspection Equipment

We have both semi-automatic and fully automatic printing machines available. We can customize the specifications to meet our customers' needs.

• Painting Machine

The "JDS Series" is a direct blow molding machine of the electric motor type. The heart of the drive, the electric servo, is made in Japan. Additionally, temperature control and many other components are also made in Japan, ensuring that the machine meets Japanese quality standards. However, the price is significantly lower than that of Japanese-made products, so please feel free to contact us for more information. It is suitable for containers for pharmaceuticals, food products, cosmetics, etc., without the use of hydraulic oil. Furthermore, the mechanical operation of the electric servo allows for more precise movements, enabling the molding of higher quality products. **Features** - Suitable for containers for pharmaceuticals, food products, cosmetics, etc., without the use of hydraulic oil - The mechanical operation of the electric servo allows for more precise movements - Capable of molding higher quality products - Purely made in Taiwan *For more details, please refer to the PDF document or feel free to contact us.*

• plastic

- Since it does not use hydraulic oil, it is possible to keep the molding environment clean. - It is an ultra-compact molding machine that does not require much installation space. - Although it is low-priced, it is a highly reliable product made in Taiwan. - Our company is responsible for providing service in Japanese. We also have models available for PVC, in addition to PE and PP.

• Extrusion Machine
• Blow Molding Machine
• Resin processing machine

Pure Taiwan-made Accumulation Type Direct Blow Molding Machine It is suitable for molding large products and thick items such as liter tanks, car ducts, and spoilers. The drive is a hydraulic cylinder, but it is equipped with an energy-saving system, so power consumption is expected to be reduced by more than 60% compared to conventional hydraulic pumps. (This may vary depending on the molding cycle.) We also have a track record of introduction to Japan, so you can use it with confidence. Since it is purely made in Taiwan, the manufacturing factory is in Taiwan, but we also have a factory that can be visited within Japan. Please feel free to contact us.

• Blow Molding Machine
• Extrusion Machine
• Injection Molding Machine

The product is a biaxial stretch blow molding machine for shaping PET bottles. It requires the supply of cold parisons (preforms), but the molding cycle is faster compared to other molding machines. By stretching PET, transparency, strength, and barrier properties are greatly enhanced. We offer the standard PET molding machine "Phoenix Series" and the high-speed PET molding machine "L Series." 【Features/Specifications of the Phoenix Series】 ■ For cases where production volume is not high but you want to mold using biaxial stretching ■ Product capacity: 60ml to 3L ■ Production volume: 2000 to 8000 bottles/hour ■ Number of cavities: 2 to 6 *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other processing machines
• Blow Molding Machine

We offer a wide variety of preforms, including those for PET bottles, wide-mouth containers, and gallon containers. Even if the preform you desire is not available, it is also possible to create a new mold.

• plastic
• Composite Materials
• Other polymer materials

The "iB4 Series" is an injection blow molding machine suitable for the production of various plastic products such as PP, PE, PS, and PET/PETG, particularly for bottles used in cosmetics, pharmaceuticals, and beverages that require high quality, with container sizes ranging from 3ml to 500ml. With automation in production, there is no need for removal of molding losses or burrs, which reduces raw material costs. Additionally, the bottles are seamlessly molded in one piece, achieving high strength, and the machine operates stably with low noise. 【Features】 - Simple design - Easy operation with a touch panel icon - 6 levels of holding pressure and 10 levels of injection material - Protects molds based on stroke, speed, and pressure - Easy monitoring and management *For more details, please download the PDF or feel free to contact us.

• Injection Molding Machine
• Blow Molding Machine

Shipping possible in as fast as 5 days Equivalent products of the currently used elastomer can be produced About half the price of Japanese-made!? Reliable Taiwanese manufacturing

• Rubber
• plastic
• Composite Materials

● It is less likely to break down because there are no compressors or complex parts. ● Only piping and power wiring are needed. ● Easy to install with a dedicated seal. ● Low cost and high efficiency, which means a high cost-performance ratio can be expected.

• Control Panel Cooler
• Other air conditioning equipment

Essential raw material automatic supply device for automation. We offer a variety of specifications.

• Other conveying machines
• Sorting machine

Peace of mind from pure Taiwanese manufacturing Assurance process Check the price (quotation) ↓ Prototype ↓ Sample confirmation ↓ Good product ↓ Equipment shipment

• Sealing machine
• Welding Machine