分析センター List of Products and Services

We would like to introduce our "Compressed Air Impurity Simple Measurement Service." This is a simple impurity measurement service aimed at maintaining and ensuring the quality of compressed air. Measurements are conducted using a compressed air impurity measurement set (detection tube method). Please feel free to contact us if you have any requests. 【Benefits】 ■ An affordable service for customers who do not require compressed air cleanliness evaluation according to JIS standards. ■ A service for customers who would like to conduct a simple measurement to understand the current state of the compressed air they are using. ■ A service for customers considering screening measurements before conducting a compressed air cleanliness evaluation according to JIS standards. *For more details, please download the PDF or feel free to contact us.

• Contract measurement

We would like to introduce our "Personal Exposure Measurement of Iodine" that we conduct. It is possible to prevent health disorders in workers caused by harmful factors present in the work environment and to maintain the work environment in an appropriate condition. When the work environment is good, workers can concentrate on their tasks with peace of mind. As a result, workers' motivation increases, and improvements in productivity and quality control can be expected. 【Features】 ■ A sampler (activated carbon) is attached near the worker's breathing zone to collect iodine from the air. ■ The collected iodine is extracted into a sodium carbonate solution and then measured using an ion chromatography analyzer (IC). *For more details, please download the PDF or feel free to contact us.

• Other analysis and evaluation services

We would like to introduce the measurement of welding fumes (manganese) during metal arc welding operations conducted in our indoor workspaces. We carry out measurements of the concentration of welding fumes in the air during metal arc welding operations to verify compliance with standard values. In cases where the values exceed the standards, we utilize the concentration data to select appropriate respiratory protective equipment. A work environment measurement specialist will develop a plan after hearing from the business operator about the work conditions and will carry out the measurements. A personal sampler will be attached to the breathing zone of the workers to collect welding fumes (manganese) from the air. **Benefits** - Health management for employees - Selection of respiratory protective equipment *For more details, please download the PDF or feel free to contact us.*

• Other analysis and evaluation services

We would like to introduce our "Boron Nitride Pharmaceutical and Quasi-Drug Raw Material Standard Analysis." To maintain and guarantee the quality of boron nitride, we conduct analyses of each item based on testing methods in accordance with the quasi-drug raw material standards and perform conformity evaluations. We provide highly reliable data backed by extensive experience, achievements, and high technical capabilities. 【Benefits】 ■ Boron nitride is mainly used in cosmetics and industrial products. ■ You can confirm whether it meets the quasi-drug raw material standards. *For more details, please download the PDF or feel free to contact us.

• Other analysis and evaluation services

We analyze the hydrated silica contained in our products to confirm that it meets the standards for quasi-drug ingredients. Hydrated silica is commonly used in everyday products such as body care products like scrubs, toothpaste, makeup primers, sunscreen products, and concealers. Hydrated silica is regulated by the Ministry of Health, Labour and Welfare, which mandates the establishment of safety standards. 【Test Items and Standards (Partial)】 ■ Color and Appearance: White to light bluish-white powder ■ Odor: Odorless ■ Heavy Metal Test: Below 30 ppm ■ Fluorine: Below 5 ppm ■ Arsenic: Below 30 ppm *For more details, please download the PDF or feel free to contact us.

• Other analysis and evaluation services

We would like to introduce our "Personal Exposure Measurement (N-Methyl-2-pyrrolidone)." In personal exposure measurement, sampling equipment (personal samplers) is attached near the breathing zone of workers to measure the concentration of harmful substances in the air and assess risks. This allows for the prevention of health hazards to workers from harmful factors present in the work environment and helps maintain the work environment in an appropriate condition. When the work environment is good, workers can concentrate on their tasks with peace of mind. As a result, their motivation to work increases, and improvements in productivity and quality control can be expected. 【Features】 ■ Evaluation based on OSHA (Occupational Safety and Health Administration) Method Number PV2043 ■ A dedicated sampler is attached near the worker's breathing zone to collect N-Methyl-2-pyrrolidone (NMP) from the air. *For more details, please download the PDF or feel free to contact us.

• Other analysis and evaluation services

Our company offers indoor air quality measurements as a countermeasure against sick house syndrome, which occurs when the concentration of chemical substances is high. By understanding the concentration of volatile organic compounds present in indoor air based on measurement data from GCMS and LC, we can ensure the health and safety of residents. In past case studies, it was confirmed that the indoor concentration met the guideline values based on the measurement results, and we received feedback that the indoor environment was safe for residents to live comfortably. 【Symptoms of Sick House Syndrome】 ■ Eyes feel irritated ■ Throat feels scratchy ■ Dizziness or nausea *For more details, please download the PDF or feel free to contact us.

• Environmental Analysis

Our company offers "personal exposure measurement," which involves attaching sampling equipment (personal samplers) near the breathing zone of workers to measure the concentration of harmful substances in the air and assess risks. By utilizing measurement data obtained from GCMS, it is possible to prevent health disorders in workers caused by harmful factors present in the work environment and maintain the work environment in an appropriate condition. Customers who previously implemented this have reported that they were able to accurately grasp the exposure situation of workers to bromopropane and confirmed that there were no issues with the current work procedures or environment. 【Features】 ■ Prevents health disorders in workers ■ Maintains the work environment in an appropriate condition ■ Increases workers' motivation, leading to improvements in productivity and quality control *For more details, please download the PDF or feel free to contact us.

• Contract measurement

We would like to introduce our "Modified Asphalt Type Identification" service. Modified asphalt has polymers and other additives to enhance properties such as flow resistance and wear resistance. By using Pyrolysis-Gas Chromatography Mass Spectrometry (Py-GC/MS), we can identify the types of polymers. This allows for the estimation of unknown polymer components and comparisons with products from other companies. 【Features】 ■ Estimation of unknown polymer components already added to modified asphalt is possible. ■ Comparison of modified asphalt and polymer components with those of other companies is possible. *For more details, please download the PDF or feel free to contact us.

• Other contract services
• Other contract services

We would like to introduce the "Investigation into the Causes of Flooring Material Degradation" conducted by our company. In residential flooring, warping of the floor material occurred, and the insulation material inside had turned yellow, prompting an investigation into the cause. The degradation of the flooring material was not due to a malfunction of the floor heating system, but rather suggested to be related to the presence of pets. [Investigation Details] ■ Sample collection on-site ■ Urine stain test on the collected samples *For more details, please download the PDF or feel free to contact us.

• Other contract services
• Other contract services

We would like to introduce our study on "Investigation of the Factors Causing Cracks in Vinyl Floor Tiles." Vinyl floor tiles (P tiles) used as flooring materials in buildings may develop cracks over long periods of use, and we have investigated the factors contributing to this issue. It is believed that the reduction of PVC content near the surface is related to the occurrence of cracks. [Investigation Details] ■ Cross-sectional observation using scanning electron microscopy on new and cracked products ■ Surface analysis using EPMA/EDS on new and cracked products *For more details, please download the PDF or feel free to contact us.

• Other contract services
• Other contract services

"Risk assessment" refers to a series of procedures for identifying hazards and harmful effects, estimating risks, and implementing reduction measures. Based on the results, businesses need to take appropriate measures to prevent occupational accidents. According to the Occupational Safety and Health Act, regulations for the autonomous management of new chemical substances through risk assessment will begin in April of the 6th year of Reiwa. Chemicals subject to these regulations will be added sequentially, and broader management will be required in the future. 【Risk Assessment Procedures (Partial)】 ■ Risk Estimation - Identification of chemicals with hazards and harmful effects - Risk estimation using mathematical models such as Create Simple ■ Confirmation Measurement - Confirmation measurement of substances with concentration standard values through personal exposure measurement *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other services

We would like to introduce a case study regarding a complaint from a product user about health issues caused by the product. This investigation focused on the odor components of the product using a Headspace Gas Chromatography Mass Spectrometry (HS-GC-MS) system. A portion of the product was sealed in a container and heated to release odor components. The released odor components in the container were measured, and the detected components were analyzed. It was found that the detected odor components were substances that can cause allergies (limonene and menthol). Our company proposes appropriate methods tailored to customer requests and the characteristics of samples, providing reliable data backed by extensive experience and technical expertise. [Case Overview] - Measurement and qualitative analysis of volatile organic compounds containing odor components in the sample - Identification of the main odor components - Clarification of the volatile organic compounds generated *For more details, please download the PDF or feel free to contact us.

• Contract Analysis
• Analysis Equipment

At the Analysis Center Co., Ltd., we conduct qualitative analysis of food-grade tar dyes in food products. Coloring agents can be divided into those extracted from plants and animals and those synthesized chemically. Among the chemically synthesized coloring agents, 12 types of tar dyes are designated as food additives. As a registered inspection organization under the Food Sanitation Act, we have been evaluating tar dyes contained in food for many years. Customers wishing to measure the coloring components of food additives are encouraged to contact us. [Overview] ■ Qualitative analysis of food-grade tar dyes in food ■ Analyzing the coloring components in samples to identify the used coloring agents *For more details, please download the PDF or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment

Our company measures trihalomethanes in drinking water using headspace gas chromatography-mass spectrometry (HS-GC/MS). We conduct quantitative analysis of trihalomethanes contained in water products and environmental samples. Trihalomethanes are a general term for organic halogenated compounds that are derivatives of methane, and the water quality standards for drinking water target four types, including chloroform. It is also possible to estimate the origin of water quality from the data of the contained components. 【Water Quality Standards for Trihalomethanes】 ■ Total Trihalomethanes: 0.1 mg/L or less ■ Chloroform (CHCl3): 0.06 mg/L or less ■ Dibromodichloromethane (CBr2Cl2): 0.1 mg/L or less ■ Bromodichloromethane (CHBrCl2): 0.03 mg/L or less ■ Bromoform (CHBr3): 0.09 mg/L or less *For more details, please download the PDF or feel free to contact us.

• Other environmental analysis equipment
• Other water quality analysis

We would like to introduce the water quality analysis of cooling water, chilled water, hot water, and makeup water that our company conducts. For cooling water, chilled water, hot water, and makeup water used in cooling towers and refrigeration units, we can perform analyses based on the water quality guidelines for refrigeration and air conditioning equipment. We have confirmed that there are no abnormalities in the cooling water currently in use, providing peace of mind. There have also been cases where it was determined that scale formation in the piping was caused by high calcium hardness in the cooling water, which resulted in customer satisfaction. [Analysis Benefits] ■ Ability to confirm whether the standards of the water quality guidelines for refrigeration and air conditioning equipment are met ■ Investigation of causes of piping corrosion, deposits, slime, etc. ■ Confirmation of the effectiveness of chemicals injected into the piping *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We would like to introduce the component analysis of trace liquids that our company conducts. Analysis of trace liquid components found in products. Even when the sample amount is small, it is possible to perform component analysis using dedicated sampling tools and thermal decomposition GC/MS. Our company provides highly reliable data backed by extensive experience, proven results, and high technical capabilities. Please feel free to contact us. 【Analysis Benefits】 ■ It is possible to understand the components of contaminants and investigate their origins. *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We would like to introduce the measurement of temperature and humidity in residential homes conducted by our company. As part of the investigation into the causes of "mold" growth, we measured the temperature and humidity within the residence. In this case, the results showed that the humidity in the living spaces was generally below 70%, while the humidity under the floor was found to be almost 80% or higher. Continuous measurement of temperature and humidity is an effective method for understanding the current conditions of the residential environment. Additionally, the measurement period can be conducted over several months depending on the conditions. 【Measurement Benefits】 ■ By conducting temperature and humidity measurements, we can understand the conditions within the residence. ■ We can confirm whether the environment was conducive to mold growth. *For more details, please download the PDF or feel free to contact us.

• Contract measurement

We would like to introduce our personal exposure measurement of chemical substances. Personal exposure measurement and workplace environment measurement are recommended as practical methods for risk assessment to understand the exposure levels of hazardous substances. In personal exposure measurement, sampling equipment is attached near the breathing zone of workers to measure the concentration of hazardous substances in the air and evaluate the risk. This helps prevent health hazards for workers from hazardous factors present in the work environment and maintains the workplace in an appropriate condition. [Main examples of personal exposure measurement (partial)] ■ Metal arc welding work: Manganese ■ Dust emission work: Dust ■ Degreasing and cleaning of metal products: 1-Bromopropane ■ Stripping of lead-containing paint: Lead *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We would like to introduce the impurity analysis of talc that we conduct. By using appropriate acids for acid decomposition and alkaline fusion to dissolve talc, we can measure the impurity elements in talc using an ICP emission spectrometer. Simultaneously measuring other elements allows us to reduce analysis costs, and knowing the impurity elements and their concentrations enables us to supply customers with stable quality. 【Recommended for】 ■ Talc manufacturers ■ Cosmetics companies ■ Food companies ■ Construction companies *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We will introduce the quantitative analysis of sulfur in rubber using the "Flask Combustion-ICP Method." A predetermined amount of absorbent solution is placed in the flask, which is then filled with oxygen. The rubber is burned, and the flask is shaken well to absorb the sulfur oxides generated by the combustion into the absorbent solution, followed by quantification using the ICP method. Adding sulfur to rubber can enhance its elasticity and strength, so confirming the amount of sulfur contained is helpful in the development and improvement of products. Please feel free to contact us if you have any inquiries. 【For such concerns】 ■ I want to conduct quality control of the rubber being manufactured. ■ I want to confirm whether the quality meets my expectations due to a change in the ordering source. *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We would like to introduce a case where we used a digital microscope (DMS) to measure the dimensions of cutter blades. Since there are no standardized sizes for cutter blades, we measured them to check for differences among manufacturers and to confirm the ability to identify variations. The comparison of cutter blades using our product suggested that the cutting edge angle, slit depth, cutting edge width, and blade cross-section angle are useful for product identification. We can provide highly reliable data with our advanced technology, so please feel free to contact us. 【Measurement Details (Partial)】 ■ Cutting Edge Angle ■ Cutting Edge Width ■ Slit Depth ■ Blade Width *For more details, please download the PDF or feel free to contact us.

• Contract measurement

Our company conducts various tests as part of a "chemical investigation" to assist in appropriate responses, determining the types of inorganic fibers with unknown materials. By analyzing inorganic fibers used in insulation materials, it is possible to qualitatively identify types of man-made mineral fibers such as rock wool, glass wool, AES, and RCF. Additionally, we can investigate whether RCF, which is subject to the Specific Chemical Substance Hazard Prevention Regulations, is being used, and whether the product is made with materials as specified. [Example of Determination] ■ XRD Analysis ■ EPMA/WDS Analysis ■ Microscopic Observation *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

We can create cross-sectional observation samples of solder joints on electronic substrates and visually confirm the soldering conditions and the elemental distribution inside the solder joints through surface analysis to check for segregation of soldering constituent elements. This allows us to provide data for your evaluation to ensure that the soldering is done correctly. As part of defect investigation, we can confirm the adhesion conditions of the solder and the presence of voids from cross-sections, as well as any bias in the components within the solder. Please feel free to contact us when you need our services. 【Features】 ■ Ability to confirm the adhesion conditions of solder and voids from cross-sections as part of defect investigation ■ Ability to confirm bias in the components within the solder *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

Our company can measure the total organic carbon (TOC) concentration dissolved in liquid samples using the TC-IC method (a method for measuring samples containing a high amount of volatile organic compounds or prone to foaming) and the NPOC method (a method for measuring samples with low TOC concentrations). From the TOC measurement results, it is possible to understand the amount of organic matter dissolved in the liquid sample. This is used in various fields such as water quality testing of drinking water, research and investigation of rivers and soil, and monitoring of factory wastewater. 【For concerns like these】 ■ Whether river water or drinking water meets standard values ■ Wanting to ship products but unsure if they are contaminated with oil or other organic matter *For more details, please download the PDF or feel free to contact us.

• Contract measurement

Our company conducts quantitative analysis of halogens (F, Cl, Br, I) and sulfur (S) contained in samples. We quantify and understand the content of halogens (F, Cl, Br, I) and sulfur (S) in the samples, which can be used for "determining compliance or non-compliance" and as "chemical evidence for inferring the cause of occurrence." Customers who wish to confirm that their products are halogen-free are encouraged to consult with us. 【Flow of Halogen Analysis】 ■ Step 1: Pre-treatment ■ Step 2: Combustion decomposition and gas collection ■ Step 3: Measurement (Ion Chromatography) *For more details, please download the PDF or feel free to contact us.

• Contract measurement

Here is an example of fatigue failure, which is a type of fracture. From several microphotographs taken at tens of times magnification, multiple ratchet marks (steps generated by the merging of fatigue fracture surfaces) were observed near the fracture initiation point. Additionally, at approximately 1000 times magnification, striations (fatigue wrinkles) were seen as wave patterns. These characteristic patterns observed in fatigue failure were noted on the fractured surface of this metal component, allowing us to conclude that this metal part failed due to fatigue. [Case Summary] - Features not discernible through macro observation (visual inspection) were revealed. - Ratchet marks and wave patterns known as striations were observed. - It was determined that the failure was due to fatigue. *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

Here, we present a case of brittle fracture, which is a type of destruction. Upon further microscopic observation (using an electron microscope) of the fracture surface, features that were not apparent in macroscopic observation (visual inspection) became clear. From the microscopic observation images magnified approximately 1000 times, the fracture surface of the metal component displayed characteristics of cleavage fracture and suspected cleavage fracture. These are characteristic fracture surfaces observed in brittle fractures, allowing us to conclude that this metal component was fractured in a brittle manner. 【Case Summary】 ■ Features that were not apparent in macroscopic observation became clear ■ Shapes of cleavage fracture and suspected cleavage fracture were observed ■ It was determined that the fracture occurred in a brittle manner *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

Our company can chemically investigate the causes of tile lifting and detachment by understanding the poor application of water absorption adjusters and the presence of residual release agents on the detached exterior wall tiles. It is possible to clarify and improve the causes of tile detachment (residual release agents, poor application of water absorption adjusters). If tile lifting and deterioration are left unaddressed, there is a risk that the exterior wall may detach and cause harm to third parties. Please feel free to contact us when you need our services. [Features] ■ It is possible to chemically investigate the causes of tile lifting and detachment. *For more details, please download the PDF or feel free to contact us.

• Contract Inspection

Our company conducts deterioration investigations of concrete through chemical analyses such as component analysis and thermal analysis to visualize deterioration. It is possible to chemically confirm whether the cracking of concrete is caused by the neutralization of cement components leading to the corrosion and expansion of rebar. Additionally, we can chemically verify the causes (mechanisms) of corrosion in the rebar within the concrete. Customers who wish to conduct chemical confirmation tests for concrete neutralization are welcome to contact us. 【Features】 ■ Chemically confirm whether the cracking of concrete is due to the neutralization of cement components leading to the corrosion and expansion of rebar. ■ Chemically verify the causes (mechanisms) of corrosion in the rebar within the concrete. *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

Our company extracts organic acids from the target substance into water through immersion and extraction operations, and measures and reports organic acids such as formic acid, acetic acid, and propionic acid (short-chain fatty acids) in the obtained extract using ion chromatography. This data can be effectively utilized as chemical information to understand the concentration of organic acids in food products and to identify the causes of piping troubles. It is used in the field by food handling businesses, the food service industry, and kitchen equipment handling companies. 【For concerns like these】 ■ I want to know the organic acids in food components that contribute to sourness and umami. ■ Ant nest-like corrosion has occurred in the kitchen piping, and I want to know the cause. *For more details, please download the PDF or feel free to contact us.

• Contract Analysis

At the Analysis Center Co., Ltd., we conduct "soil contamination status surveys." We perform historical investigations (document surveys), overview surveys (surface surveys), detailed surveys (boring surveys), and implement remediation measures for contaminated soil. Thanks to the determination that there is no contaminated soil as a result of the soil contamination status survey, we have received feedback from customers stating that they were able to proceed smoothly with land transactions and modifications. [Applications] ■ Factories with a history of using hazardous substances as defined by the Soil Contamination Countermeasures Act; clients include business owners of factories and developers (e.g., construction companies, design offices). ■ Developers conducting large-scale land modifications such as the construction of condominiums (e.g., construction companies, real estate, design offices, etc.). *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "coating content and leaching tests (mainly for lead and hexavalent chromium)." We perform tests using methods tailored to specific purposes, such as standard tests for coatings (JIS K 5674), tests related to waste (Environmental Agency Notification No. 13), and contamination surveys due to coatings (sediment survey methods). We have received feedback from customers stating, "We were able to properly dispose of the coating fragments after work" and "We were able to confirm whether the coating we originally used meets the standards." 【Features】 ■ You can confirm whether the coating you are using complies with (JIS K 5674). ■ By knowing whether it is industrial waste or special industrial waste, you can dispose of it appropriately. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "XRF/EDS analysis of metallic foreign substances in food." As part of the investigation into metallic foreign substances found in delivered food products, we perform qualitative and semi-quantitative analysis using X-ray fluorescence analysis equipment (XRF/EDS). Additionally, this can be utilized in the food industry. Please feel free to contact us when needed. 【Features】 ■ Quick test results due to measurement by X-ray fluorescence ■ By identifying the material of the "discovered metallic foreign substances," we can investigate the cause of occurrence *For more details, please feel free to contact us.

• Analytical Equipment and Devices

"Work environment measurement" is a means to prevent health disorders in workers engaged in tasks involving hazardous substances by measuring the concentration of hazardous substances in the work environment and determining whether scientific improvement measures are necessary. It is a fundamental aspect of occupational health measures. In designated workplaces handling organic solvents, specific chemical substances, lead, dust, etc., work environment measurements require technical expertise and are conducted by certified work environment measurement professionals or organizations. Additionally, as a means of chemical substance risk assessment, work environment measurement is recommended as a highly reliable measurement method. [Features] ■ It can prevent health disorders in workers from hazardous factors present in the work environment and maintain the work environment in an appropriate condition. ■ A good work environment allows workers to concentrate on their tasks with peace of mind. ■ Workers' motivation increases, leading to expected improvements in productivity and quality control. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "foreign substance analysis." We can convey detailed characteristics of foreign substances to our customers through images. Additionally, by implementing infrared spectroscopy (IR), which is effective for analyzing organic components, it becomes easier to identify the components. We have received feedback from customers stating that understanding the characteristics and components of foreign substances has enabled them to take measures against contamination. 【Applications】 ■ When found indoors or inside machinery ■ When wanting to know the components as part of an origin investigation *For more details, please feel free to contact us.

• Analytical Equipment and Devices

We conduct "investigations into the causes of unusual odors to identify the substances responsible and chemically prove the pathways of intrusion." Through on-site investigations (sample collection) and chemical analysis, we can chemically prove the "identification of the substances causing the unusual odors," the "proof of the pathways of intrusion," and whether what is emitted from the source matches the "contaminants." We have received feedback from customers stating that they had a chimney extension constructed for the store that emitted the unusual odor, allowing the exhaust outlet to be installed above the height of the store building. [Features] ■ The investigation results serve as chemical evidence, enabling requests for improvements to the source store regarding what is emitted from the source. ■ The investigation results serve as chemical evidence, allowing requests for cleaning of contaminated items at the source store. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "indoor air and building material component analysis, including the investigation of the location of odor-causing substances through odor cause investigation." We perform on-site investigations (sample collection) and chemical analyses to clarify the "odor-causing substances" and provide chemical proof of whether the "indoor odor air components" and "building material components" match. We have received feedback from customers stating that they were able to carry out renovation work based on information about odor-causing substances and sources of odor. 【Benefits】 ■ Use the investigation results as chemical evidence to request improvements from the source store regarding what is emanating from the source. ■ Use the investigation results as chemical evidence to request cleaning of contaminated items from the source store. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "odor index measurements based on the Odor Prevention Law." We recommend this service to factories, wastewater treatment plants, industrial waste treatment facilities, and restaurants (such as ramen shops and yakiniku places), as well as deodorization equipment manufacturers and contractors. We have received feedback from customers stating that they were able to negotiate the installation of deodorization equipment with property owners of restaurants and that our service provided useful information for maintenance of deodorization equipment (timing for activated carbon replacement). 【Features】 ■ By accurately understanding the state of odors from exhaust gases, we can provide materials for considering deodorization equipment and work processes. ■ This helps prevent complaints from other facilities around the discharge area. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "Standard Compliance Testing for Non-Metallic Abrasives for Blast Treatment." Products that comply with JIS standards gain higher reliability in the market. Additionally, when buyers and users of blast materials encounter issues with the products, they can verify compliance with the standards. We have also received feedback from customers stating that knowing their products comply with JIS standards has led to quality assurance. 【Applications】 ■ Industries that manufacture blast materials ■ Construction industry and others that use blast materials ■ Import and export companies *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "analysis of biogas components." By understanding the occurrence of effective components in biogas (such as hydrogen and methane), it helps in evaluating plant performance and considering operating conditions. We analyze the main components of biogas generated in bioplants, etc. (hydrogen, oxygen, nitrogen, carbon monoxide, carbon dioxide, methane, ethylene, ethane). [Customer Feedback] ■ In response to the request for quick results due to the perishable nature of gas, we provided expedited service and reported results within 1 to 2 business days, receiving thanks for "the quick results were very helpful." *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "differentiation of cutter blades." By measuring the sample to be analyzed and the reference product, and comparing the measurement results, differentiation is possible. If a foreign object is mixed in and it is a cutter blade, it can be confirmed whether it originates from products commonly used within the company or not. We can observe details of the product that are not discernible to the naked eye. [Overview] ■ Measurement and comparison using a digital microscope *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct inspections of toys based on the Food Sanitation Act. Through inspections based on the Food Sanitation Act, it is possible to confirm whether the content and leaching amounts of harmful substances in toys that may be touched by infants under 6 years old are within the standard limits. We recommend this service for companies that import and sell toys, as well as for self-inspections during import customs procedures. 【Features】 ■ Our company is a registered inspection organization under the Food Sanitation Act. ■ We have inspection experience since 2009. *For more details, please feel free to contact us.

• Analytical Equipment and Devices

At the Analysis Center Co., Ltd., we conduct "Analysis of Soluble Components in Insulating Materials According to ASTM C871." We perform leaching analysis of soluble components (fluoride, chloride ions, silicate, sodium ions) from various insulating materials in accordance with ASTM methods and evaluate the results. Additionally, we have a track record of minimal leaching of corrosive components from insulating materials, providing reassurance to our users. 【Features】 ■ Measurements can be conducted in accordance with ASTM C871 ■ Recommended for factories using insulating materials and manufacturers selling them *For more details, please feel free to contact us.

• Analytical Equipment and Devices

We would like to introduce our "YAG Component Analysis." By completely dissolving YAG through alkaline fusion and conducting measurements using the ICP method, it is possible to obtain elemental information about YAG. Our company can provide accurate values for the composition, impurity levels, and additive amounts of YAG powder through our complete dissolution method using alkaline fusion and precise ICP measurements. 【Benefits】 ■ By obtaining elemental information about YAG, you can understand the values of composition, impurities, and additives. *For more details, please download the PDF or feel free to contact us.

• Business Intelligence and Data Analysis