三菱ガス化学ネクスト（旧日本ユピカ） List of Products and Services

【Exhibition Overview】 ■ Name: 2nd Automotive World Autumn - Advanced Automotive Technology Exhibition ■ Dates: September 13 (Wednesday) to September 15 (Friday), 2023, 10:00 AM to 5:00 PM ■ Venue: Makuhari Messe (Lightweight Processing Technology Zone) ■ Products We Plan to Exhibit: ・Resin CBZ for CFRP ・CBZ Prepreg ・Low-pressure Sealing Thermosetting Molding Material Bioglass ・Biomass Polyester BIOMUP ・Environmentally Friendly Resin ・Yupica Mat

• Composite Materials

Our company will be exhibiting at the "2nd Automotive World [Autumn]" held at Makuhari Messe from September 13 to 15, 2023. At our booth, we will showcase resins and FRP materials aimed at lightweighting automobiles. We invite you to visit our booth. 【Exhibited Products (Excerpt)】 ◎ Resin for CFRP "CBZ" ■ High adhesion to carbon fibers sized for epoxy resins ■ High adhesion to glass, aramid, and basalt fibers ◎ "CBZ-Prepreg" (Under development) ■ High performance: High adhesion to fibers allows for broader CFRP design possibilities ■ High cycle: Contributes to improved productivity due to fast curing ◎ Low-pressure sealing thermosetting molding material "Bioglass" ■ Dry molding material using crystalline thermosetting resin ■ Excellent electrical insulation, flame retardancy, and heat resistance *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Composite Materials
• Other Auto Parts

The "PVC Repair and Reinforcement UV-Cured Sheet" strongly adheres to rigid PVC due to its FRP characteristics and is a reinforced fiber plastic sheet (developed product) that cures quickly under ultraviolet (sunlight) exposure. It can be laminated directly without a primer when reinforcing PVC pipes and similar applications. Repairs can be performed with simple procedures while minimizing variations in the finished product. 【Features】 ■ Adhesion tests have been conducted to demonstrate high strength ■ The transparent sheet allows for confirmation of the adhesive surface ■ The only pre-lamination process required is degreasing *For more details, please refer to the PDF materials or feel free to contact us. ★ We will be exhibiting at the "Highway Techno Fair 2022" starting on November 24th (Thursday). For more information, please see the <Basic Information>.

• plastic

Mitsubishi Gas Chemical Next (formerly Nippon Yupika) has developed a "PVC Repair and Reinforcement Light-Curing Sheet" that can be laminated directly without a primer and cured using sunlight. It adheres strongly to rigid PVC and exhibits higher strength than PVC fusion bonding. The transparent sheet allows for visibility of the adhesive surface, and since it cures with ultraviolet light (including sunlight), anyone can perform simple installation. 【Features】 ■ High adhesion to rigid PVC, exhibiting higher strength than PVC fusion bonding ■ Cures with ultraviolet light (including sunlight), allowing for easy installation by anyone ■ The transparent sheet allows for visibility of the adhesive surface ■ Can be reinforced with only degreasing, without a primer *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Repair Agent

【Exhibition Overview】 1st Automotive World 2022 Autumn 　Advanced Automotive Technology Exhibition ● Date: August 31 (Wednesday) - September 2 (Friday) 10:00 - 17:00 ● Venue: Makuhari Messe ● Booth Number: A9-38 ● Products We Plan to Exhibit: 　・Resin CBZ for CFRP 　・Intermediate Material for CFRP 　・Biomass Polyester BIOMUP 　・Low-Pressure Sealing Thermosetting Molding Material Bioglass 　・PVC Repair Light-Curing Sheet 　・Yupika GF-SMC 　・Hydrogen Barrier Prepreg

• Composite Materials
• Other Auto Parts

【Exhibition Overview】 Automotive World 2022 12th Lightweight Vehicle Technology Exhibition ● Date: January 19 (Wednesday) to 21 (Friday) 10:00 AM to 5:00 PM ● Venue: Tokyo Big Sight, East Hall 4 ● Booth Number: 32-37 ● Products We Plan to Exhibit: 　・Resin CBZ for CFRP 　・Intermediate Material for CFRP 　・Biomass Polyester BIOMUP 　・Low-Pressure Sealing Thermosetting Molding Material Bioglass 　・PVC Repair Light-Curing Sheet 　・Yupica GF-SMC 　・Hydrogen Barrier Prepreg

• plastic
• Composite Materials

Compared to standard glass SMC, high strength can be achieved. If you have requests such as "the strength of general SMC is insufficient" or "carbon fiber is too expensive," please give it a try. *For more details, please download the PDF or feel free to contact us.

• Composite Materials
• Vehicle body parts

On October 1, 2024, Nippon Finechem Co., Ltd. and Nippon Yupika Co., Ltd. merged to start a new company called Mitsubishi Gas Chemical Next Co., Ltd. The "CBZ Series" is a thermosetting resin that excels in adhesion to various fibers, including carbon fibers, and enables the production of FRP with excellent mechanical properties. It can be applied to various molding methods, similar to conventional unsaturated polyester resins and vinyl ester resins. The "Liquid CBZ," which can cure at room temperature to high temperatures, is currently used in various applications. Additionally, we are developing an intermediate material called "CBZ Prepreg" that leverages the characteristics of Liquid CBZ. 【Features】 ■ High adhesion to carbon fibers sized for epoxy resins ■ High adhesion to glass, aramid, and basalt fibers ■ Provision of CFRP with excellent bending, compression, and interlaminar shear strength ■ Fast curing due to radical polymerization ■ Low water absorption ■ Resistance to moisture, oil, and gasoline *For more details, please download the PDF or feel free to contact us.

• Composite Materials

CBZ manufactures many parts using pull-out molding. We have a strong track record due to high strength and good productivity. Feedback from pull-out molding manufacturers: "We can produce at three times the speed when using epoxy resin, which has improved productivity. The properties of CFRP are equal to or better than those of epoxy resin, and there are no issues." 【Features of CBZ】 ■ High adhesion to carbon fibers sized for epoxy resin ■ High adhesion to glass, aramid, and basalt fibers ■ Provision of CFRP with excellent bending, compression, and interlaminar shear strength ■ Low water absorption ■ Moisture resistance, oil resistance, and gasoline resistance ■ Fast curing achieved through radical polymerization. *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• plastic

CBZ molds many automotive parts using VaRTM. We have a proven track record of high strength and excellent surface quality. Features of Infusion (VaRTM) Molding: - No need for large equipment such as autoclaves (pressure vessels) - Easy to mold large structures as a single piece - Minimal volatilization of organic solvents, resulting in a better working environment - Compared to hand lay-up methods, it allows for higher fiber content and lower void content, enabling the molding of high-quality FRP [Features of CBZ] - High adhesion to carbon fibers sized for epoxy resins - High adhesion to glass, aramid, and basalt fibers - Provision of CFRP with excellent bending, compression, and interlaminar shear strength - Low water absorption - Resistance to moisture, oil, and gasoline *For more details, please refer to the PDF materials or feel free to contact us.

• Composite Materials
• plastic

CFRP produced by "CBZ" can significantly improve productivity because it cures much faster than conventional CFRP. In fact, productivity has increased by 2 to 3 times in pull-forming processes. 【Features of CBZ】 ■ High adhesion to carbon fibers sized for epoxy resins ■ High adhesion to glass, aramid, and basalt fibers ■ Provision of CFRP with excellent bending, compression, and interlaminar shear strength ■ Low water absorption ■ Resistance to moisture, oil, and gasoline *For more details, please refer to the PDF materials or feel free to contact us.

• Composite Materials

This document contains a list of product brands handled by our company. It includes a list of brands such as "Unsaturated Polyester," "Epoxy Acrylate," and "Urethane Acrylate." Please take a moment to read it. [Contents] ■ Unsaturated Polyester ■ Saturated Polyester ■ Epoxy Acrylate (Vinyl Ester) ■ Urethane Acrylate ■ BIOMUP *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Yupikamat" is a non-woven foam fabric developed jointly by Toyobo Co., Ltd., Toyo Cross Co., Ltd., and Nippon Yupika Co., Ltd. as a core material for FRP sandwich laminates, aimed at improving workability, reducing weight, and lowering costs. It adheres very well to polyester resin and contains approximately 55% resin by volume. When an appropriate amount of polyester resin is impregnated, there is almost no change in thickness after curing. [Features] - By impregnating 55% resin by volume, a high-strength core layer is formed after curing. - The amount of polyester resin used is significantly reduced, allowing for cost savings. - Increased thickness results in higher rigidity. - Impact absorption and thermal insulation effects can be expected. - Higher bending strength, bending elasticity, and shear strength can be achieved. *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

This document is a corrosion resistance guide for "Yupica corrosion-resistant resin," handled by Mitsubishi Gas Chemical Next (formerly Nippon Yupica). It includes sections such as "Types and Characteristics of Corrosion-Resistant Resins," "Liquid Properties and Casting Plate, Laminated Plate Characteristics of Corrosion-Resistant Resins," and "Chemical Resistance Performance Table." Please read through it. [Contents] ■ About Yupica Corrosion-Resistant Resin ■ Types and Characteristics of Corrosion-Resistant Resins (Iso-type, Tere-type, Bis-type, Vinyl Ester Resin) ■ Liquid Properties and Casting Plate, Laminated Plate Characteristics of Corrosion-Resistant Resins ■ Curing Characteristics of Corrosion-Resistant Resins ■ Chemical Resistance Performance Table ■ Precautions for Handling *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

Mitsubishi Gas Chemical Next (formerly Nippon Yupica) has developed a low-pressure thermosetting dry molding material called "Bioglass" for encapsulation of miniaturized electronic materials, which simultaneously achieves reduced production time and low-pressure molding with insert molding capabilities. Compared to conventional materials, it allows for significant productivity improvements due to rapid curing and post-curing elimination. It contributes to the "miniaturization" and "reduction of processes" in automotive components. *For more details, please refer to the PDF document or feel free to contact us.*

• Composite Materials

Due to its high adhesion to carbon fibers, the liquid resin CBZ, after several improvements, has become an intermediate material. Features and Benefits: - High performance: Increased design range for CFRP - High cycle: Improved productivity - Storage: Reduced cooling costs - Transparency: Appearance and weather resistance - High weight products: Reduced cutting work, increased productivity - Paintability: Good compatibility with acrylic urethane paints - Low odor: Styrene-free - Low shrinkage: Significant reduction in warping during molding *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

Mitsubishi Gas Chemical Next (formerly Nippon Yupika) has developed thermosetting compounds "CP-01" and "CP-02" that achieve both high flame resistance and low smoke generation. FRP components made from this material are not only difficult to ignite but also produce minimal smoke during combustion, allowing for safer evacuation times in the event of a fire. These materials comply with domestic and international flame retardant standards and have a proven track record in the railway vehicle sector, electrical and electronic sector, and construction materials sector. *For more details, please refer to the PDF document or feel free to contact us.*

• Composite Materials

Mitsubishi Gas Chemical Next (formerly Nippon Yupika) manufactures biomass polyester "BIOMUP" using plant-derived materials as part of its efforts for natural environmental conservation. It contributes to CO2 reduction through the concept of carbon neutrality (thermal recycling). Currently, materials using BIOMUP have achieved significant results in the civil engineering and paint sectors. *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Organic Natural Materials

"Viroglass" is a thermosetting dry molding material made from crystalline unsaturated polyester resin, possessing excellent properties such as electrical insulation, flame resistance, and heat resistance. Compared to BMC molding materials, Viroglass excels in handling, moldability, and storage stability. Additionally, we provide an easy-to-understand presentation of Viroglass's performance, including graphs of bending characteristics after heat resistance tests and strength characteristics after heat cycle tests, as technical documentation. 【Features】 ■ Excellent properties of electrical insulation, flame resistance, and heat resistance ■ Heat-resistant grade, flame-retardant grade, high-strength grade, heat dissipation grade ■ Applications in electrical equipment, electronic components, automotive electrical parts, heat-resistant parts, and more *For more details, please request documentation or view the PDF data available for download.

• others

The "CBZ Series" is a thermosetting resin that excels in adhesion to various fibers, including carbon fiber, and enables the production of FRP with excellent mechanical properties. Like general unsaturated polyester resins and vinyl ester resins, it can be applied to various molding methods. We offer "Liquid CBZ," which can cure at room temperature to high temperatures, and "Prepreg CBZ," which is styrene-free and has low shrinkage. 【Features】 ■ High adhesion to carbon fibers sized for epoxy resins ■ High adhesion to glass, aramid, and basalt fibers ■ Excellent mechanical properties in bending, compression, and interlaminar shear strength ■ Low water absorption and low moisture absorption ■ Oil resistance and gasoline resistance *For more details, please refer to the PDF materials or feel free to contact us. ★ We will be exhibiting at the "Advanced Materials Technology Exhibition 2022," which will be held from October 19 (Wednesday). We will conduct panel displays introducing our initiatives related to composite materials such as carbon fiber composites, as well as product and technology presentations.

• Other Auto Parts
• plastic
• Composite Materials