サノテック List of Products and Services

◆ Purpose and Effects - Promote "smart safety" for open inspections inside towers in oil and chemical plants. - Achieve "efficiency in safety operations / enhancement of safety levels / resolution of manpower shortages in safety" through digitalization and remote monitoring. - Reduce costs for "labor management / entry monitoring / safety management" by utilizing IoT and cloud technology. ◆ Main Functions 1. Entry Monitoring Function - Digitize the entry and exit of workers using "IC card" touch. - Manage "company name, name, entry and exit times" by tank. - Worker information is notified to remote management office PCs via a secure cloud. - Monitors observe entry workers while checking the footage from "surveillance cameras." 2. Roll Call Function - The intercom function allows for "roll call and communication" during entry and exit from the management office. 3. Warning Function - Emergency warnings are notified via "stacked signal lights." - Warnings can be issued bidirectionally between the remote side and the tank side. 4. Reporting Function - Output reports of "entry history" including company, responsible person, entry and exit times, etc. ◆ Related Products (Effectiveness Increased through Collaboration) - Gas detection and monitoring system "SMART-Gasken." - Constant cloud connectivity for real-time gas concentration detection.

The fully automatic gas detection monitoring system "SMART-Gasken" can detect gas 24/7 without the need for a LAN environment and without human intervention! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a fixed "gas detection unit" ◎ Constantly connected to the "cloud" via a built-in SIM (gas concentration is continuously uploaded) ◎ Equipped with an LCD screen (monitoring panel) for "checking detection status" and "various settings including alarms," etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring is possible via "smartphones" and "tablets," allowing information sharing with stakeholders. In case of an alarm, "alarm notifications" can also be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of "labor" and the increasing expenses of "equipment inspections."

■ Features By utilizing an internet connection, we have achieved remote monitoring by integrating remote monitoring cameras, IP intercoms, IC card entry and exit systems, and stacked display lights all into the cloud. The implementation of this system does not require communication equipment such as networks in the yard, allowing for quick deployment. ■ Operation Flow 1. When entering the tank, the worker uses the IP intercom to receive a roll call from the remote supervisor before entry. 2. The worker touches the IC card to the entry management board before entering the tank. 3. The monitoring center continuously observes the workers inside the tank using recordable surveillance cameras. 4. In the event of an emergency, the worker presses the emergency button on the touch panel at the entry point, which sends an alarm notification to the monitoring center's display lights in conjunction with the display lights inside the tank. 5. When the worker exits the tank, they also touch the IC card to the entry management board. All entry status is notified in real-time to the management computer at a remote location. 6. Additionally, the system is equipped with a report output function for entry history (including company name, worker name, entry time, exit time, etc.).

In oil and chemical plants, during open inspections inside towers, I believe that personnel are secured for equipment maintenance through entry and exit procedures and roll calls. Monitoring is mandatory during open inspections, which has become a significant challenge due to the rising labor costs. In response, Sanotech offers solutions for the efficiency of safety operations, enhancement of safety levels, and resolution of manpower shortages through digitalization and remote monitoring! It is possible to reduce equipment maintenance costs and labor management expenses, and to achieve efficient "entry monitoring" and "safety management." 【Features】 ■ Remote monitoring of "entry and exit, roll calls, video, recording, alerts, and history" ■ Data collection of workers' entry and exit using "IC cards" ■ Easy report generation of "entry history," including company, responsible person, and entry/exit times ■ Gas detection and monitoring can also be provided simultaneously! By reviewing the materials on methods to reduce remote monitoring and maintenance costs, you will find helpful hints. *For more details, please download the catalog or contact us directly.

■ Features By utilizing an internet connection, we have achieved remote monitoring by integrating remote monitoring cameras, IP intercoms, IC card access control, and layered display lights all into the cloud. The introduction of this system does not require communication equipment such as networks in the yard, allowing for a quick implementation. ■ Operation Flow 1. Upon entry, the worker uses the IP intercom to receive a roll call from the remote monitor. 2. The worker touches their IC card to the access control board before entering. 3. The monitoring center continuously observes the workers entering using recordable surveillance cameras. 4. In the event of an emergency, the worker presses the emergency button on the touch panel at the entrance, which sends an alarm notification to the monitoring center's display light in conjunction with the entrance display light. 5. When the worker exits the pit, they also touch their IC card to the access control board. All entry and exit statuses are notified in real-time to the remote management computer. 6. Additionally, the system is equipped with a report output function for access history (including contractor name, worker name, entry time, exit time, etc.).

◆ Purpose and Effects - Promote "Smart Safety" for open inspections inside towers in oil and chemical plants. - Achieve "efficiency in safety operations / enhancement of safety levels / resolution of manpower shortages in safety" through digitalization and remote monitoring. - Reduce costs for "labor management / entry monitoring / safety management" by utilizing IoT and cloud technology. ◆ Main Functions 1. Entry Monitoring Function - Digitize the entry and exit of workers using "IC card" touch. - Manage "company name, name, entry and exit times" by tank. - Worker information is notified to the remote management office PC via a secure cloud. - Monitors observe entry workers while checking footage from "surveillance cameras." 2. Roll Call Function - The intercom function allows for "roll call and communication" during entry and exit from the management office. 3. Warning Function - Emergency alerts are issued via "stacked signal lights." - Warnings can be issued bidirectionally between the remote side and the tank side. 4. Reporting Function - Generate reports on "entry history" including company, responsible person, and entry and exit times. ◆ Related Products (Effectiveness Increased through Collaboration) - Gas detection and monitoring system "SMART-Gasken." - Cloud always connected, real-time detection of gas concentration.

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring is possible via smartphones and tablets, allowing information sharing with relevant parties. In case of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

The fully automatic gas detection monitoring system 'SMART-Gasken' enables gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via a built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring is possible via smartphones and tablets, allowing information sharing with relevant parties. In case of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Always connected to the cloud via built-in SIM (constantly uploads gas concentration) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For centralized monitoring at the monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" can also be utilized. Additionally, monitoring is possible via smartphones and tablets, allowing for information sharing with relevant parties. In the event of an alarm, "alarm notifications" can be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

The fully automatic gas detection monitoring system "SMART-Gasken" allows for gas detection 24/7 without the need for a LAN environment! (Main Features) ◎ Lightweight and excellent portability (easy to carry and install) ◎ Linked with a stationary gas detection unit ◎ Constantly connected to the cloud via a built-in SIM (gas concentration is continuously uploaded) ◎ Equipped with an LCD screen (monitoring panel) for checking detection status and various settings including alarms, etc. For monitoring at the centralized monitoring center, free BI tools such as "Google Data Portal" and "Microsoft Power BI Desktop" are also available. Additionally, monitoring can be done via smartphones or tablets, allowing for information sharing with relevant parties. In case of an alarm, "alarm notifications" can also be sent to pre-registered email addresses. ★ This serves as a powerful tool to curb the rising costs of labor and the increasing expenses of equipment inspections.

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" will enhance the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (tasks such as removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance, etc.) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, drainage pipes, etc.) - Water drainage and wastewater treatment (draining water before work and transporting wastewater, etc.) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation work, etc.) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate confirmation of the situation via PC or smartphone ❸ Introduction with reduced initial costs through subscription *Please download the "catalog" to check the details.

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance, etc.) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, drainage pipes, etc.) - Water drainage and wastewater treatment (draining water before work and transporting wastewater, etc.) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation work, etc.) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription *Please download the "catalog" to check the details.

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Cleaning and sludge removal work (removing sludge and foreign objects accumulated at the bottom of the tank) - Inspection and testing work (checking for corrosion, leaks, cracks, and abnormal temperatures inside the tank) - Repair and lining (repairing deteriorated areas, applying coatings to improve chemical resistance) - Installation and updating of piping and equipment (installation or replacement of pumps, sensors, and drainage pipes) - Water drainage and wastewater treatment (draining water before work and transporting wastewater) - Gas detection and ventilation work (detecting hazardous gases and performing ventilation) 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate status confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription *Please download the "catalog" to check the details.

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas" - Sludge removal (collection and transportation of settled sewage and sludge) - Inspections and visual checks (confirmation of cracks, corrosion, and leaks) - Repair work (concrete repairs, waterproofing layer reinstallation) - Instrumentation maintenance (replacement and cleaning of flow meters, level gauges, etc.) - Coating (application of chemical-resistant lining (FRP, epoxy resin)) - Odor control equipment work (updating activated carbon and chemical spray equipment) - Maintenance of mixers and aerators (replacement of underwater motors and mixing blades), etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without a LAN environment by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription *Please download the "catalog" to check the details.

In the conventional "tank management board," concerns were raised about human errors such as omissions and forgetfulness in entries. However, the new DX service "Safety-board" enhances the safety and efficiency of tank management operations. 1. Main tasks in "oxygen-deficient hazardous areas": - Removal of sludge inside the tank (removal of sludge, scale, and waste residues) - Gas venting and ventilation (removal of flammable and toxic gases such as methane) - pH and component measurement (confirmation of the components in the tank liquid) - Sensor inspection and replacement (replacement and adjustment of level meters, concentration meters, and gas detectors) - Inner wall repair and lining (reconstruction to maintain chemical resistance and corrosion resistance) - Maintenance of mixers and pumps (cleaning of stirring blades, repair of motors and seals) - Odor prevention equipment work (cleaning and replacement of activated carbon and chemical spray nozzles) - Cleaning of the tank bottom, etc. 2. Three features of "Safety-board": ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please check the "catalog."

In the conventional "Entry Management Board," concerns were raised about human errors such as omissions and forgetting to erase, but the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Manual Cleaning (cleaning inside the tank) - Clean-in-Place (automated circulation cleaning) - Foreign Object Inspection (detection of black spots, rust, water stains, etc.) - Internal Polishing and Finishing (removal of fine scratches and maintenance of Ra value) - Sterilization (sterilization using hot water, steam, and chemical solutions) - Allergen Changeover Cleaning (cleaning during product changeover) - Gas Replacement - Corrosion Inspection and Lining Repair, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription * For details, please check the "catalog."

In the conventional "Entry Management Board," concerns were raised about human errors such as omissions and forgetfulness in recording. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Manual Cleaning (cleaning inside the tank) - CIP (Clean-In-Place) inspection (inspection of CIP piping) - Visual and illuminance checks (visual confirmation of residues and foreign substances inside the tank) - Sample collection for validation (checking residual cleaning agents using swab solutions, etc.) - Inspection of wear and weld areas (surface inspection in compliance with GMP) - Internal re-polishing and electro-polishing (EP) (removal of fine surface irregularities) - Gas replacement operations (e.g., N2) - Confirmation of foreign substance contamination risks, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please refer to the "catalog."

In the conventional "Inlet Management Board," concerns were raised about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of inlet management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Scale removal (removal of deposits such as calcium inside drums and heat exchangers) - Inspection of corrosion and wear (inspection of steel plates and pipes deteriorated by oxygen and salt) - Interior lining repairs (chemical resistance reinforcement work for tanks exposed to acid and alkaline agents) - Cleaning operations (removal of sludge and sediments) - Leak and vapor point confirmation (water pressure and air pressure tests at seal and weld areas) - Chemical injection and replacement operations (chemical cleaning and passivation treatment) - UT thickness measurement - Inspection of internal piping and tank bottom drains, etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please check the "catalog."

In the conventional "Entry Management Board," there were concerns about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "Oxygen Deficiency Hazard Areas" - Welding and cutting work (bulkhead and support installation, panel welding) - Painting and lining work (corrosion-resistant painting) - Cleaning and sludge removal (tank cleaning, residual oil suction) - Corrosion inspection and sound testing (plate thickness and pinhole investigation, confirmation of steel plate corrosion and cracks) - Air tightness testing (leak checks at welds, confirmation of air pressure retention and bubble leaks) - Equipment installation and piping layout (installation of pumps, valves, and piping) - Internal surface polishing and treatment (removal of weld beads and smoothing work), etc. 2. Three features of "Safety-board" ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, data shared in the cloud, and immediate situation confirmation via PC or smartphone ❸ Introduction with reduced initial costs through subscription * For details, please refer to the "catalog."

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas": - Gas purging and replacement operations (replacing oxygen and flammable gases with inert gas) - Internal inspections and examinations (checking for corrosion, cracks, leakage traces, and deformation) - Sludge removal and cleaning (removing residues such as oil, chemicals, and rust) - Painting and lining repairs (reapplying corrosion-resistant coatings and gas-resistant paint on the interior) - Insulation material inspection and repair (checking for deterioration of insulation materials in LNG and liquid hydrogen tanks) - Valve and sensor maintenance (replacing and maintaining level gauges, pressure gauges, safety valves, etc.) - Gas detection and leak testing (confirming gas residue), among others. 2. Three features of "Safety-board": ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication. ❷ Recording with IC cards, sharing data in the cloud, and instant situation confirmation via PC or smartphone. ❸ Possible implementation with reduced initial costs through subscription. *For details, please check the "catalog."

In the conventional "entry management board," concerns were raised about human errors such as omissions and forgetting to erase entries. However, the new DX service "Safety-board" enhances the safety and efficiency of entry management operations. 1. Main tasks in "oxygen-deficient hazardous areas": - Gas venting and gas-free operations (discharging flammable gases from tanks and confirming safety) - Sludge removal (cleaning oil sludge and wax accumulated at the bottom) - Internal inspections (checking for corrosion, leaks, and deposits) - Repair and welding work (pinhole repairs, welding reinforcements on inner walls, etc.) - Coating work (reapplication of oil and chemical-resistant linings) - Piping and valve replacements (repairing and replacing strip lines and nozzle sections) - Updating sensors and measuring instruments, etc. 2. Three features of "Safety-board": ❶ Smooth implementation even in sites without LAN environments by utilizing SIM communication ❷ Recording with IC cards, sharing data in the cloud, and immediate situation confirmation via PC or smartphone ❸ Possible implementation with reduced initial costs through subscription * For more details, please check the "catalog."