八洲電装 List of Products and Services

This system is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global market for ultrasonic sensor elements and is manufactured at its overseas factories. It is a sonar system for tank trucks composed of a dedicated controller and ultrasonic sensors, which alerts drivers to the dangers of obstacles in front of and behind the vehicle with warning sounds and a dedicated display. The adoption of sonar systems as standard equipment in passenger cars has increased, leading to a greater understanding of safety and convenience. As a result, inquiries for tank trucks have surged. This is a backup sonar that warns of collision accidents when tank trucks are reversing. It is a product specifically designed for safety checks immediately after the vehicle begins to reverse and just before it stops, ensuring detection distances of 100cm/180cm from the vehicle body when traveling at speeds of approximately 10 km/h or less. This product was developed in collaboration with major commercial vehicle manufacturers specifically for commercial vehicles. It has been installed in over 20,000 units across a wide range of commercial vehicles, including not only tank trucks but also major logistics companies both domestically and internationally, major route buses in major cities, sightseeing buses, camper vans, fire trucks, and packer trucks. With a wide network of retailers covering the entire country, orders including installation work can be placed throughout Japan, excluding remote islands. For more details, please feel free to contact us via message.

• Sensors
• Electrical equipment parts
• Other Auto Parts

This is a sonar sensor system for commercial vehicles compatible with Clarion's digital cameras and monitors. It does not support cameras and monitors from manufacturers other than Clarion. It contributes to safety immediately after the vehicle starts and just before it stops. The detectable range is 100 cm or 180 cm from the vehicle body when traveling at approximately 10 km/h or less. The distance and position of detected objects are displayed on the monitor (in increments of about 10 cm). It warns of dangers such as bicycles and pedestrians suddenly appearing, children, crouching individuals, and structures, thereby reducing the risk of vehicle damage and personal injury accidents. Up to 8 channels of sensors can be incorporated to match the vehicles owned by customers, and there is a wide variety of harness lengths available. Since the start of series sales, there have been over 20,000 units installed (as of 2025). - The combination with rear cameras is effective as a countermeasure against accidents due to a shortage of skilled drivers. - For leased vehicles, there is an increasing number of users of lease contracts with a slight increase in fees. - Introducing the sonar system as a customization for voluntary insurance can lower insurance premiums. Since our dealers cover a wide area nationwide, orders including installation work can be placed throughout the country, excluding remote islands. For more details, please feel free to contact us via message. (This product is for corporate sales.)

• Sensors

The "AI Left Turn Collision Prevention Camera System" solves the serious issue of left turn collision accidents, which is a major challenge for safe operation. This system is not just an ordinary camera. ● It can be retrofitted to the left side mirror of the tractor head. ● Designed for trailers, it monitors a wide area of 4.5 meters from the left side of the vehicle and 14 meters from the front to the rear, covering the significant blind spots that occur during left turns. ● The camera footage is analyzed in real-time by AI, instantly detecting the approach of pedestrians and bicycles. ● Depending on the level of danger, the detection area on the monitor lights up in green, yellow, or red. When danger is imminent, an alarm sounds to alert the driver. ● Equipped with infrared LEDs, it demonstrates high detection performance even in dark environments at night. ● It is compatible with large trucks, semi-trailers, and full trailers, making it applicable to various vehicle types. ● Installation can be completed in a short time of 2 to 4 hours, minimizing the impact on operational schedules. ● During left turns, the detection range is automatically optimized and expanded in accordance with the trailer's movement, supporting safer left turns. By adding AI warning functions to the camera footage that covers blind spots, the risk of accidents during left turns is reduced, alleviating the psychological burden on drivers.

• Other safety equipment

This product was jointly developed with a major commercial vehicle manufacturer specifically for commercial vehicles. It detects obstacles hidden in blind spots at a distance of 100cm/180cm from the vehicle body when the vehicle is traveling at approximately 10 km/h or less, just after departure and just before stopping, and warns with visual and audio alerts. It is developed in collaboration with a manufacturer of ultrasonic elements that holds a 60% share of the global market and is produced in our overseas factory. It warns of often-overlooked dangers such as pedestrians and bicycles suddenly appearing, strollers, children, crouching individuals, and structures, thereby reducing the risk of vehicle damage and personal injury accidents. It significantly enhances the reliability and safety of operations, contributing to your company's stable operations and business continuity. The installation record for commercial vehicles, including not only trucks but also major domestic route buses, tourist buses, camper vans, fire trucks, and packer trucks, exceeds a total of 20,000 units. The increase in passenger cars equipped with sonar has led to a broader understanding of safety and convenience. ● Accident prevention measures due to a shortage of skilled drivers ● Customizing voluntary insurance by introducing sonar systems to reduce insurance premiums In leased commercial vehicles, safety for users is secured with a slight increase in fees, leading to an increase in adoption. Our dealers cover a wide area nationwide, and orders including installation work can be placed throughout the country, excluding remote islands. (This product is for corporate customers.)

• Sensors

Safe and secure for both drivers and pedestrians! Blind spots can be supported by technology! This product supports blind spot checks for buses. It warns of obstacles with visual and audio alerts. The system detects obstacles hidden in blind spots when the vehicle is moving at approximately 10 km/h or less, such as immediately after departure or just before stopping, reducing the risk of vehicle damage and personal accidents. It also warns of often-overlooked dangers like sudden crossings, bicycles, pedestrians, structures, strollers, children, and crouching individuals. This enhances the reliability and safety of operations, contributing to your company's stable operations and business continuity. Additionally, it can reduce the mental burden on new drivers. With an increasing number of passenger cars equipped as standard, understanding of their safety and convenience has progressed, and societal demands for safe operation management have risen, fulfilling social responsibilities and helping to reduce the burden on drivers, thus aiding in human resource development. ● Safety measures for one-person operation ● Collision accident measures due to a shortage of experienced drivers ● Prevention of upper rear collisions ● Prevention of eaves collisions Designed and developed by a Japanese ultrasonic element manufacturer with a 60% share of the global market, and manufactured at our overseas factories. Since the start of series sales for not only buses but also commercial vehicles, we have achieved cumulative sales of over 20,000 units.

• Sensors

The feature is that "we achieve a beautifully mirror-like shear surface with a standard press." Typically, when punching with a press, a fracture surface occurs, and especially when creating precision or mechanical parts from difficult-to-machine materials like SCM or S45C, additional processing to handle the fracture surface created during punching was necessary. However, it has become possible to manufacture thick press parts with shear surfaces comparable to fine blanking, and with a mirror-like finish and smoothness, using a standard servo press. In particular, for thick press parts where additional processing was required to achieve cutting surface precision, there is a possibility of eliminating finishing processes! By utilizing this precision pressing technology for thick press parts, we have achieved high cost competitiveness, including mold costs and processing costs.

• gear
• Other machine elements

This is a safety confirmation product used immediately after vehicle departure and just before stopping. It ensures a detection distance of 60cm/180cm from the vehicle body at speeds of approximately 10 km/h or less. This system is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global ultrasonic sensor market and is manufactured at its overseas factories. It is a sonar system for trailers, consisting of a dedicated controller and ultrasonic sensors designed and developed in Japan, configurable with up to 8 channels. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and since its launch for commercial vehicles such as trucks and buses, it has been installed in over 20,000 units. The basic configuration of the system comes in two types: 1. An on-screen display type that shows the detection distance on a backup monitor (model number AHD-OT●-) 2. A dedicated LED indicator display type (model number YSD-OT●-) - The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. - Compatible with both 12V and 24V power supplies. It is also possible to have the system installed by authorized dealers with proven track records. Orders including installation work are available through a wide sales network covering most regions nationwide, excluding some areas. For more details, please feel free to contact us via message. (This product is for corporate sales.)

• Sensors

A compact and low-power monocular 3D camera suitable for machine vision, smaller than conventional light field cameras. We will be exhibiting at the Image Sensing Exhibition 2025 held from June 11 (Wednesday) to June 13 (Friday) at Pacifico Yokohama! Exhibitor Name: photonicSENS Booth No. DS-D5 High precision with up to 2.1M pixels Simultaneous generation of high-precision depth maps using 2D images and proprietary algorithms Examples of representative products: AP-24151.8 Field of View: 3.5° WD 51.8mm Accuracy: 10μm 1.4M pixels AP1-241E131C Field of View: 6.8° WD 131mm Accuracy: 10μm 2.1M pixels AP1-241E206C Field of View: 8.4° WD 206mm Accuracy: 30μm 2.1M pixels We also offer various modules tailored to applications and can accommodate customizations. There is also a free loan program for evaluation kits (EDK) based on usage and evaluation methods. Configuration: apiCAM SDK for operation on PC Manual (Includes some cables and stands, etc.) *There is also a type that allows high-precision measurement of 10μm at 100mm.

• Visual Inspection Equipment
• Circuit Board Inspection Equipment
• Other optical parts

A compact monocular 3D camera optimized for machine vision, smaller than conventional light field cameras. High precision and wide angle with up to 2.1M pixels. Automatically generates high-precision 3D depth maps simultaneously using RGB images and proprietary algorithms. Achieves competitive pricing with a compact design and low power consumption. Dimensions: H41×W31×D30 mm, Weight: 41g Achieves high-precision measurements of less than 1% within 1m and about 3% at 4m. We offer various modules tailored to applications and can accommodate customization based on needs. There is also a free loan program for evaluation kits (EDK) depending on the application and evaluation method (please consult for details). Measurement distances vary depending on the type of lens, so we will respond based on the requirements of your application. Configuration: apiCAM (Application Processing Interface) Camera module SDK for operation on PC Manual (Includes some cables and stands) *There is also a type capable of high-precision measurement of 10μm at 100mm. Domestic distributor in Japan: Yashima Densou Co., Ltd.

• Visual Inspection Equipment
• Circuit Board Inspection Equipment
• Other optical parts

This is a bus sonar system composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of supporting up to 8 channels. The ultrasonic sensor elements use Japanese sensors with a top global market share, and the controller is a dedicated ECU designed and developed domestically, incorporating proprietary algorithms. In the 7 years since its launch, over 3,500 units have been supplied, primarily for route buses. The basic system configuration has two types: - On-screen display type that can show detection distance with a backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The standard installation positions are 2ch in the front and 6ch in the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

3D images and 3D objects can generate depth maps with higher resolution and accuracy using a passive monocular camera compared to a ToF camera. There are types available that can accommodate close distances of about 10 cm if necessary. Achieves high-precision measurement values of less than 1% within 1 meter and about 3% at 4 meters. With a simple single-camera configuration, it is modularized and supports various modules suitable for compact, low-power applications, as well as customization to meet specific needs. By incorporating a lens array into a single camera and using a unique algorithm, it automatically generates high-resolution depth maps with a maximum of 1.4 million pixels in a compact form. Evaluation kits (EDK) are also available for purchase. The measurement distance varies depending on the type of lens, so we will respond based on the requirements of your application. Configuration: apiCAM (Application Processing Interface) Camera module : SDK for operation on PC : Manual : (Includes some cables and stands, etc.) Domestic distributor in Japan: Yashima Denso Co., Ltd.

• Sensors
• Virtual Reality Related
• Distance measuring device

This is a sonar system for buses and trucks, consisting of a dedicated controller and ultrasonic sensors designed and developed in Japan, with a maximum configuration of 8 channels. The ultrasonic sensor elements are designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global market, and they are manufactured at their overseas factory, boasting high quality and reliability for commercial systems. The controller is a dedicated ECU that incorporates a unique algorithm, and since its supply began for trucks and buses, it has achieved over 8,000 units in 7 years. The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V. The system has two basic configurations: - An on-screen display type that shows detection distance with a backup monitor interruption. - A dedicated LED indicator display type. We can also accommodate vehicle installations upon request.

• Sensors
• Electrical equipment parts
• Other Auto Parts

We are engaged in mass production (including prototypes) of various harnesses, from high-voltage harnesses in orange needed for vehicle and agricultural machinery electrification to signal systems. We can accommodate prototypes even when the development stage drawings are not finalized, and we can handle small to medium lot mass production at our domestic factory (with the latest dedicated equipment already introduced in the summer of 2024). We can also provide specified connectors (it will be necessary to provide end-user information to the connector manufacturer). *It is acceptable to supply parts. We can support mixed high-voltage harnesses where one side has connector A and the other side has connector B. In prototypes, we also manufacture harnesses using the latest connectors at the request of research and development departments from automobile manufacturers and parts manufacturers, and we can accommodate new connectors as well. In mass production, we have numerous achievements including harnesses for car air conditioning, fuel pump systems, main harnesses for snow removal machines and riding lawn mowers, as well as onboard chargers for EVs and lithium batteries for drive systems. We have extensive mass production experience ranging from crimping, soldering, and shielded cables to small lead wire processing and main harnesses with over 300 circuits. We own about 500 applicators, primarily for automotive use.

• Electrical equipment parts
• Automotive Connectors
• Contract manufacturing

This is a sonar system for buses and trucks, consisting of a dedicated controller and ultrasonic sensors designed and developed in Japan, with a maximum configuration of 8 channels. The ultrasonic sensor elements are designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global market, and they are manufactured at their overseas factory, boasting high quality and reliability for commercial systems. The controller is a dedicated ECU that incorporates a unique algorithm, and since its launch for trucks and buses, it has achieved over 8,000 units in just 7 years. The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted in some cases. *Compatible with both 12V and 24V. The system has two basic configurations: - An on-screen display type that shows detection distance with a backup monitor interruption. - A dedicated LED indicator display type. We can also accommodate vehicle installations upon request.

• Sensors
• Electrical equipment parts
• Other Auto Parts

- Mold-less processing using special jigs It is possible to minimize the cost of the main mold, which has been a barrier in prototyping and small-scale production. It is suitable for shallow drawing, bead processing, embossing, and edge drawing. Since a main mold is not required, products can be provided at an overwhelmingly low cost and short delivery time. *Note: Due to the lifespan of the jigs, it is not suitable for mass production exceeding 1,000 units. - Sheet metal processing through forming (processing using jigs and forming) Recommended materials: Stainless steel (t0.1 to 2.0 mm) Iron-based (t0.3 to 3.2 mm) Aluminum (t0.3 to 5.0 mm) Maximum processing range: Maximum drawing size: 1500 × 1200 mm Maximum drawing depth: 400 mm (a 25-degree incline is required) Maximum processing speed: 500 mm/sec

• Other machine elements
• bracket
• Other Auto Parts

By converting small sheet metal parts with welded joints to zinc die casting, it may be possible to eliminate welding! Zinc die casting has a higher specific gravity compared to aluminum, resulting in a relatively increased weight. However, it has good fluidity during casting, and the flowability within the mold during casting is also excellent, allowing for thin-walled designs and high-precision casting at a level of 3/100. This enables high-precision casting that does not require post-processing once removed from the mold. Even parts that are welded from sheet metal, such as sensor covers made of sheet metal, may become more cost-effective overall by switching to zinc die casting, despite the mold costs. Additionally, since it is die casting, it allows for integration of other parts, enabling innovative designs for component unification. **Features** - Excellent fluidity during casting, enabling precision casting - Proven applications in gear parts for camera and lens autofocus, movable parts for semiconductor mounting machines, and in automobiles (such as seats) - Post-processing free with a precision of about 3/100 for palm-sized parts - A safe alloy used in children's toy cars

• gear
• bracket
• alloy

Are you considering reducing costs associated with post-processing of metal cast parts by using zinc die casting to eliminate machining? Zinc die casting has a higher specific gravity compared to aluminum, resulting in a relatively increased weight. However, it has good fluidity during casting, allowing for excellent flow within the mold, enabling thin-walled designs and high-precision casting at a level of 3/100. This means that high-precision castings can be produced that do not require post-processing once removed from the mold. As a result, by leveraging the precision of casting, it becomes possible to significantly reduce costs by eliminating machining for products that previously required post-processing in aluminum die casting. Additionally, in some cases, such as sensor covers and other sheet metal products, eliminating welds has led to significant cost reductions depending on the size. Using zinc materials with lubricating properties for gears and sliding parts also allows for cost reductions through VAVE. 【Features】 ■ Good fluidity during casting, enabling precision casting ■ Proven applications in gear parts for camera and lens autofocus, movable parts in semiconductor mounting machines, and automotive components (such as seats) ■ Post-processing-free designs utilizing approximately 3/100 precision for palm-sized components ■ Safe alloys used in children's toy cars

• gear
• bracket
• alloy

We are engaged in mass production (including prototypes) of various harnesses needed for electrification, ranging from high-voltage and strong electrical systems for automotive and industrial use to signal systems. We can accommodate prototypes even when the drawings are not finalized during the development stage, and we can handle medium-lot mass production at our domestic factory. It is also possible to procure specified connectors (providing end-user information to the connector manufacturer is necessary). *We can also accept supplied parts. In prototypes, we manufacture harnesses using the latest connectors upon requests from the research and development departments of automotive manufacturers and parts manufacturers, and we can also accommodate new connectors. In mass production, we have numerous achievements, including harnesses for car air conditioning, fuel pump systems, main harnesses for snow removal machines and riding lawn mowers, as well as onboard chargers for EVs and drive lithium batteries. We have extensive mass production experience, ranging from crimping, soldering, and shielded cables to small lead wire processing and main harnesses with over 300 circuits. We own more than 500 applicators, primarily for automotive use.

• Electrical equipment parts
• Automotive Connectors
• Contract manufacturing

This is a current sensor with extensive in-vehicle experience in applications such as drive inverters (AC) and lithium-ion battery charge/discharge monitoring (DC), and it can also be fully customized. It uses an original Hall element developed specifically for current sensors, and by adopting a unique compensation circuit, it achieves high precision and high reliability. Due to its small temperature drift, it can be used under harsh conditions across a wide temperature range. *In terms of specifications for each product, supply voltage and various specification tolerances can also be customized according to your requirements.

• Other semiconductors
• Other electronic parts
• Electrical equipment parts

Press processing involves placing a workpiece on a die and pressing it with a punch. In conventional press processing, a significant clearance (the gap between the die and the punch) is often required, which can lead to the occurrence of "dimpling" and "burrs" on the processed material. "Fine Blanking (FB) processing" is a method that applies pressure from both directions with minimal clearance. This results in a finish with fewer dimples and burrs, eliminating the need for post-processing. Additionally, it allows for processing while maintaining the thickness of the material, significantly contributing to the reduction of raw material costs. 【Main Achievements】 ■ Automotive disc brakes ■ Automotive muffler flange components ■ Automotive and motorcycle gear components and more *For more details, please download the PDF or feel free to contact us.

• Engine parts
• Vehicle body parts

Are you experiencing steam leaks due to the deterioration of the rubber packing in your steamer or steaming cabinet? By replacing it with a rubber packing that does not deteriorate, you can significantly reduce the frequency of replacements and effectively address steam leaks caused by packing deterioration, thereby greatly decreasing the frequency of replacements due to deterioration. The rubber sponge material used here is EPDM, which excels in chemical resistance, cold resistance, ozone resistance, and aging resistance. By adding the characteristic of "non-deterioration" to the inherent elasticity of sponge rubber, replacements due to deterioration become unnecessary. Additionally, by developing this concept further, it can also be utilized as a "damper material" by taking advantage of its consistent load response. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below the measurement limit - Flame retardant/oil resistant grade (railway flame retardant compliant) * Custom cutting to the required length is available, and it can be delivered with adhesive tape - Instantly restores from a compressed state - High shape retention - Extremely low permanent deformation strain - Soft sponge suitable for a wide range of applications

• Rubber
• Food Processing Equipment
• Food storage equipment and facilities

Industrial Applications (Long-term Supply System) - We are actively implementing various measures as part of our company policy. Outdoor Touch Sensors (Shower, Thick Glove Compatible) - Capable of touch sensing in the industry's highest level of harsh outdoor environments. TFT+CTP High Brightness Products - 3.5” to 15.6” high brightness (over 1000 cd/m²), long lifespan (50,000 hours), wide temperature range (-30°C to 85°C). CTP (PCAP) Firmware Adjustment - Based on a close relationship with touch IC manufacturers, EDT can provide direct, rapid, and detailed firmware adjustments for customers. CTP + Cover Lens Optical Bonding - In-house lamination and optical bonding capabilities. We can also accommodate decorated printed cover lenses. UV resistant for outdoor use. Non-contact Sensors (Space Gesture) Detects within 5cm even in harsh environments - Capable of automatic switching between non-contact and direct touch based on the usage environment. Hover touch from 60cm is also possible when combined with millimeter-wave radar. QD Display (Outdoor Visibility) - Excellent visibility even under strong sunlight with color purity (NTSC ratio over 100%) and high contrast (over 1000).

• LCD display
• Other embedded systems (software and hardware)
• Display

Industrial Applications (Long-term Supply System) - We are implementing various measures as part of our company policy. Outdoor Touch Sensors (Shower, Compatible with Thick Gloves) - Capable of touch sensing in the industry's highest level of harsh outdoor environments. TFT+CTP High Brightness Products - 3.5” to 15.6” high brightness (over 1000 cd/m²), long lifespan (50,000 hours), wide temperature range (-30°C to 85°C). CTP (PCAP) Firmware Adjustment - Based on a close relationship with touch IC manufacturers, EDT can provide direct, rapid, and detailed firmware adjustments for customers. CTP + Cover Lens Optical Bonding - In-house lamination and optical bonding capabilities. We can also accommodate decorative printed cover lenses. UV resistant for outdoor use. Non-contact Sensors (Space Gesture) Detects within 5cm even in harsh environments - Capable of automatic switching between non-contact and direct touch based on the usage environment. Hover touch from 60cm is also possible when combined with millimeter-wave radar. QD Display (Outdoor Visibility) - Excellent visibility even under strong sunlight with color purity (NTSC ratio over 100%) and high contrast (over 1000).

• LCD display
• Other embedded systems (software and hardware)
• Display

TFT+CTP High Brightness Products - 3.5” to 15.6” high brightness (over 1000cd/m2), long lifespan (50,000 hours), wide temperature range (-30℃ to 85℃) CTP (PCAP) Firmware Adjustment - Based on a close relationship with touch IC manufacturers, EDT can provide direct, rapid, and detailed firmware adjustments for customers. CTP + Cover Lens Optical Bonding - In-house lamination and optical bonding are available. We can also accommodate decorated printed cover lenses. UV resistant for outdoor use. Industrial Applications (Long-term Supply System) - As a company policy, we are actively implementing various initiatives. Outdoor Touch Sensors (Shower and Thick Glove Compatible) - Capable of touch sensing in the industry's most demanding outdoor environments. Non-contact Sensors (Space Gesture) Detects within 5cm even in harsh conditions - Can automatically switch between non-contact and direct touch based on the usage environment. Hover touch from 60cm is also possible when combined with millimeter-wave radar. QD Display (Outdoor Visibility) - Excellent visibility even under strong sunlight with color purity (NTSC ratio over 100%) and high contrast (over 1000).

• LCD display
• Other embedded systems (software and hardware)
• Display

TFT+CTP High Brightness Products - 3.5” to 15.6” high brightness (over 1000 cd/m²), long lifespan (50,000 hours), wide temperature range (-30℃ to 85℃) CTP (PCAP) Firmware Adjustment - Based on a close relationship with touch IC manufacturers, EDT can provide direct, rapid, and detailed firmware adjustments for customers. CTP + Cover Lens Optical Bonding - In-house lamination and optical bonding are available. We can also accommodate decorated printed cover lenses. UV resistance for outdoor use is available. Industrial Applications (Long-term Supply System) - As a company policy, we are actively implementing various initiatives. Outdoor-Compatible Touch Sensors (Shower and Thick Glove Compatible) - Capable of touch sensing in the industry's highest level of harsh outdoor environments. Non-contact Sensors (Space Gesture) Detects within 5cm in Harsh Environments - Can automatically switch between non-contact and direct touch based on the usage environment. Hover touch from 60cm is also possible when combined with millimeter-wave radar. QD Display (Outdoor Visibility) - Excellent visibility even under strong sunlight with color purity (NTSC ratio over 100%) and high contrast (over 1000).

• LCD display
• Other embedded systems (software and hardware)
• Display

Our waterproof and dustproof electric fans are widely used in heavy-duty applications such as automobiles, commercial vehicles, construction machinery, and agricultural machinery, even in harsh environments. We offer both 12V and 24V types, with a wide range of electric fans including brush motor types, brushless motor types, and DC axial fans. All production processes are carried out in our own factory in Italy, from raw materials to resin molding, circuit board assembly, and final product inspection. These fans are suitable for construction machinery, agricultural machinery, large commercial vehicles, and buses, addressing exhaust emission regulations through electric direct fans and improving fuel efficiency through multi-cooling. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 and IP6K9K - Excellent efficiency and high airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness With IP68 certification, they are completely sealed, providing protection against the intrusion of solid and liquid substances. We can also design and produce custom-made shrouds and fans according to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

A Japanese sensor manufacturer, which holds a 60% share of the global ultrasonic sensor market, has designed and developed this system, which is manufactured at its overseas factory. This is a sonar system for trailers that can be configured with a dedicated controller and ultrasonic sensors developed in Japan, supporting up to 8 channels. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and has achieved over 6,000 units in the market for trucks and buses within six years of its launch. The basic configuration of the system comes in two types: - On-screen display type that shows detection distance with backup monitor interruption - Dedicated LED indicator display type (under development) The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The standard installation positions are 2ch in the front and 6ch in the rear (2ch on top / 4ch on the bottom). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V systems. - Controller and harness kit for tractors - Sensor and harness kit for trailers *Each can be sold separately. The connection point between the tractor and trailer can be disconnected using a dedicated connector with a waterproof cap. If requested, installation on the vehicle can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

This is a sonar system for buses and trucks, composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, with a maximum configuration of 8 channels. The system is designed and developed by a Japanese sensor manufacturer that holds a 60% share of the global ultrasonic sensor market, and it is manufactured at their overseas factory. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and there have been over 6,000 units supplied for trucks and buses within six years of the start of supply. The basic configuration of the system consists of two types: - An on-screen display type that shows the detection distance with a backup monitor interruption. - A dedicated LED indicator display type. The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2 channels at the front and 6 channels at the rear (2 channels at the top / 4 channels at the bottom). The sensor angles can be adjusted to some extent. *Compatible with both 12V and 24V systems. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

Is there a decrease in water-stopping functionality due to a shortage of craftsmen or lack of experience in caulking, leading to water-stopping complaints? We propose the possibility of achieving caulking-free solutions by converting part of the on-site caulking to rubber packing. Additionally, by using sponge rubber that incorporates a high resilience feature of "not deforming," we can significantly reduce the frequency of caulking reapplication. The EPDM, which is the raw material for rubber sponge, possesses excellent chemical resistance, cold resistance, ozone resistance, and aging resistance. By adding the characteristic of "not deforming" to the inherent elasticity of sponge rubber, it eliminates the need for replacement due to deformation. Furthermore, by developing this concept, it can also be utilized as a "damper material" by leveraging a certain load response. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur measured below the detection limit - Flame retardant/oil-resistant grade (railway flame retardant compliant) * Can be cut to the required length and delivered with adhesive tape - Instantly restores from a compressed state - High shape retention - Extremely low permanent deformation strain - Soft sponge suitable for a wide range of applications

• Rubber
• Water Hydraulic Equipment
• Sealing

This is a sponge rubber made of EPDM with the added feature of high resilience that does not deform easily. When used as airtight seals for equipment handling powders or waterproof seals for liquids, it exhibits extremely low compression deformation even over long periods, preventing the seals from wearing out. For example, it significantly reduces the frequency of seal replacements in areas with poor maintenance accessibility. By incorporating the inherent chemical resistance, cold resistance, ozone resistance, and aging resistance of EPDM, along with the "non-deforming" characteristic of sponge rubber, it eliminates the need for replacements due to wear. Additionally, by further developing this concept, it can also be utilized as a "damping material" by leveraging its consistent load response. - Features - - High weather resistance with EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below measurement limits - Flame retardant/oil resistant grade (railway flame retardant compliant) * Custom cutting to required lengths available, with adhesive tape for delivery - Instant recovery from a compressed state - High shape retention - Extremely low permanent deformation - Soft sponge suitable for a wide range of applications

• Rubber
• Water Hydraulic Equipment
• Sealing

High-recovery ethylene propylene diene monomer (EPDM) rubber, when used as airtight seals for equipment handling powders or waterproof seals for liquids, exhibits extremely low compression deformation even after prolonged use, ensuring that the seals do not "sag." By utilizing this feature, it becomes possible to significantly reduce the frequency of seal replacements in hard-to-maintain areas deep within machinery. As a material, EPDM excels in chemical resistance, cold resistance, ozone resistance, and aging resistance. Its inherent elasticity as sponge rubber, combined with its non-sagging characteristics and consistent load response, allows it to also be used as "damping material." High-recovery rubber sponge has extremely low permanent deformation, providing excellent shape retention, and it instantly returns to its original form even after being subjected to prolonged pressure. - Features - - High weather resistance due to EPDM (ethylene propylene rubber) - Operating temperature range: -20 to +80°C - Sulfur-free grade with free sulfur below measurement limit - Flame retardant/oil-resistant grade (railway flame retardant compliant) * Custom cutting to required lengths available, with adhesive tape for delivery - Instantly recovers from a compressed state - High shape retention - Extremely low permanent deformation - Soft sponge suitable for a wide range of applications

• Rubber
• Water Hydraulic Equipment
• Food Processing Equipment

This is a DC high-voltage power relay that can be used for battery main circuit control in electric vehicles, buses, trucks, construction machinery, and special vehicles. It is capable of detecting disconnections and short circuits, providing robust protection for electrical systems. Its structure does not require gas, eliminating the risk of explosions due to arcs or gas leaks. ■ Compact and lightweight ■ Minimum arc structure that does not require gas ■ Capable of detecting disconnections and short circuits ■ Bidirectional charging possible ■ Energy-saving structure with latching mechanism Applicable standards: ISO16750, IATF16949, ECE R10 E-T-A is a manufacturer specializing in circuit protectors and relays, founded in Germany in 1948. As a top brand manufacturer of circuit protectors for equipment protection, it offers a wide range of products including overcurrent protection, power distribution, circuit protectors, breakers, power relays, and semiconductor relays. Yashima Densou, as a technical trading company for electronic components, is promoting sales activities, including technical support in collaboration with E-T-A's Japanese subsidiary, and has begun mass production deliveries to domestic automobile manufacturers.

• relay
• Other Auto Parts
• Other electronic parts

The intelligent distribution module is a smart distribution and control unit that can significantly upgrade traditional fuse boxes. There are two versions available: a semiconductor version that allows pre-setting of protection functions for each channel via CAN connection, and a socket version that enables users to incorporate ISO micro relays and fuses. It is compatible with various platforms such as electric vehicles, buses, trucks, construction machinery, special vehicles, agricultural machinery, and construction equipment, and has environmental resistance compliant with IP67. Even in the relay-fuse version, it is compact, but the semiconductor version greatly improves layout flexibility due to its overwhelmingly thin shape. The main functions include the ability to initialize devices via CAN, switch load outputs, monitor current and voltage output states in real-time, quickly send diagnostic data to the master controller, and achieve smart predictive maintenance and load management. In the semiconductor version, each channel can be set up to a maximum of 30A with CAN control. You can choose between 8-channel or 12-channel specifications.

• relay
• Other terminal blocks
• fuse

This is a bus sonar system composed of a dedicated controller and ultrasonic sensors designed and developed in Japan, capable of supporting up to 8 channels. The controller is combined with a dedicated ECU that incorporates a unique algorithm, and in the bus sector, it has achieved over 2,000 units in sales within 6 years of its launch. The core ultrasonic sensor elements of the system use Japanese-made sensors that hold a 60% share in the global market. The basic configuration of the system comes in two types: - On-screen display type that shows detection distance with a backup monitor interruption - Dedicated LED indicator display type The basic sensor configurations are 2ch, 4ch, 6ch, and 8ch. The basic installation positions are 2ch at the front and 6ch at the rear (2ch on the upper side / 4ch on the lower side). The sensor angles can be adjusted in some parts. *Compatible with both 12V and 24V. If requested, vehicle installation can also be carried out by a partner company with proven experience.

• Sensors
• Electrical equipment parts
• Other Auto Parts

EDT Corporation in Taiwan develops and manufactures touch panel products in-house at its factories in Taiwan and China. By utilizing proprietary technology, we combine manufacturing processes, touch ICs, touch drive methods, and sensitivity adjustment software to create optimal products tailored to customer needs, achieving fine touch sensitivity. In addition to non-contact capabilities, our products can maintain touch sensitivity even in environments with mist, water droplets, and showers, and we also offer types that can operate under conditions that were previously difficult, such as wearing leather gloves or double-layered work gloves. Our non-contact touch panels can meet the needs arising from COVID-19 countermeasures. LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factories: Kaohsiung, Taiwan; Dongguan, China (TS16949) Founded: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen (as of 2021) Listed on the Taiwan Stock Exchange Our products are designed with the premise of industrial equipment, ensuring long-term supply as much as possible. *Yashima Denso is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation Smart Embedded Product Configuration: Integrated TFT + CTP + Embedded board OS: RTOS Input Voltage: 7V ~ 36V (can be used over a wide range, not just a single voltage) CTP (Software/Hardware): Yes TFT (Software/Hardware): Yes Custom Design: Available (interface, CTP, TFT can be modified) Source Code: Available (interface, CTP, TFT) *Interfaces: WIFI, BT, SPI, UART, I2C, GPIO, USB, RS485... GUI Support: Free for Touch GFX LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen (as of 2021) *Listed on the Taiwan Stock Exchange *Yashima Denso is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation LCD Panels (For Replacement Solution) Size Res. Model Number Mass Production Start 8.4" 1024 x 768 ET084030DVA 2021 10.4" 1024 x 768 ET104030DSA 2021 12.1" 1024 x 768 ET121030DVA 2021 LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen *2021 *Listed on the Taiwan stock market These products are designed with the premise of industrial equipment and are made to ensure long-term supply as much as possible. *Yashima Densou is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Taiwan EDT Corporation manufactured LCD panels (For Replacement Solution) Size Res. Part Number Sample Mass Production Start 8.4" 1024 x 768 ET084030DVA End of December 2021 10.4" 1024 x 768 ET104030DSA End of December 2021 12.1" 1024 x 768 ET121030DVA End of December 2021 LCD Touch Panel Manufacturer Company Name: EDT (Emerging Display Technologies) Headquarters: Kaohsiung, Taiwan Factory: Kaohsiung, Taiwan; Dongguan, China (TS16949) Established: 1994 Employees: Approximately 1,200 Sales: 16.3 billion yen *2021 *Listed on the Taiwan Stock Exchange These products are designed with the premise of industrial equipment, ensuring long-term supply as much as possible. *Yashima Densou is the official domestic distributor of EDT Corporation.

• LCD display
• Other embedded systems (software and hardware)
• Display

Our waterproof and dustproof electric fans are highly suitable for heavy-duty applications such as automobiles and construction machinery, and they are widely used in agricultural machinery both domestically and internationally. We offer both 12V and 24V types, with a wide range of electric fans including brush motor types, brushless motor types, and DC axial fans. All production processes are carried out in our own factory in Italy, implementing every step from raw material processing, resin molding, circuit board assembly, to finished product inspection in-house. Our products can be adapted for construction machinery, agricultural machinery, large commercial vehicles, and buses, addressing exhaust gas regulation measures through the electrification of direct drive fans and improving fuel efficiency through multi-cooling. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and high airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and completely sealed, protecting against the intrusion of solid and liquid substances. We can also provide custom-made shrouds and designs/production of fans tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

Our waterproof and dustproof electric fans for heavy-duty applications, such as automobiles and construction machinery, are widely adopted in agricultural machinery both domestically and internationally. We offer both 12V and 24V types, with a wide range of electric fans including brush motor types, brushless motor types, and DC axial fans. All production processes are carried out in our own factory in Italy, implementing every step from raw material processing, resin molding, circuit board assembly, to finished product inspection in-house. Our products are suitable for construction machinery, agricultural machinery, large commercial vehicles, and buses, addressing exhaust gas regulations through the electrification of direct drive fans and improving fuel efficiency through multi-cooling. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120°C - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

By minimizing the bending sections of pipes, we can improve the flexibility of the liquid cooling pipe layout for vehicle-mounted batteries. Additionally, eliminating issues related to welding and achieving high press-fit outer diameter tolerances can lead to improved quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven results guaranteeing a range of 15μ after surface treatment This can reduce the layout restrictions of piping for units requiring liquid cooling and contribute to reduced pressure loss. We have a proven track record for domestic vehicle inverters and are currently mass-producing approximately 160K units annually!

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

By minimizing the bending parts of pipes, we can improve the layout flexibility of onboard inverters and motors. *We have a proven track record with domestic HEVs and PHEVs, currently producing around 160K units annually! By eliminating issues caused by welding and achieving high press-fit outer diameter tolerances, we can enhance quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven track record of guaranteeing a range of 15μ after surface treatment This can reduce the limitations of piping layouts for units requiring liquid cooling and also contribute to reducing pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

By minimizing the bending parts of pipes, we can improve the flexibility of the piping layout for onboard inverters and motors. Additionally, by eliminating issues related to welding and achieving high tolerances for the outer diameter of press-fit parts, we can enhance quality. We have a proven track record with domestic HEVs and PHEVs, currently producing around 160K units annually! "Outer Diameter Tolerance of Press-Fit Parts" Proven record of a guaranteed range of 15μ after surface treatment. Bending: Minimum bending center radius (R) = 0.75D Press-fit: Tolerance range = 15μ (Minimum) Flattening: Cross-sectional area reduction rate = 13% (Minimum) Example of a record for minimal R bending: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center radius *0.6D is also possible under certain conditions. We can reduce the limitations of piping layouts for units requiring liquid cooling, contributing to a decrease in pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts

We sell electric fans such as DC axial fans, brush motor types, and brushless motor types as mass-produced components. Waterproof and dustproof electric fans for heavy-duty applications such as automobiles and construction machinery 12V, 24V All processes from raw materials to products are managed in Italy, and the production process is carried out at our own factory in Italy. We also have quality evaluation capabilities and can conduct evaluations in-house. By electrifying direct drive fans, they are adopted in construction machinery, agricultural machinery, large commercial vehicles, and buses that require measures for exhaust gas regulations and fuel efficiency improvements. Features of brushless motor fans: - Completely sealed motor - Heavy-duty specifications compliant with IP68 & IP6K9K - Excellent efficiency and large airflow - Long lifespan - Temperature characteristics: operating temperature range -40 to 120℃ - Low noise, excellent vibration resistance, and harshness All motors certified to IP68 are waterproof (WP) and are completely sealed, protecting against the intrusion of solid and liquid substances. We also offer custom-made shrouds and fan designs/production tailored to customer needs.

• Electrical equipment parts
• Ventilation and Exhaust
• Cooling system

Improvements can be made to the restrictions around pipes that hinder flexibility during the layout of vehicle-mounted inverters and motors. Additionally, eliminating issues caused by welding joints and achieving high press-fit outer diameter tolerances can enhance quality. Bending: Bending center R = 0.75D (Min) Press-fit: Tolerance range = 15μ (Min) Flattening: Cross-sectional area reduction rate = 13% (Min) Example of minimal R bending achievements: Φ25.4 × t1.6 CR20 = 0.8D Φ17.0 × t1.2 CR13 = 0.76D *CR = Bending center R *0.6D is also possible under certain conditions "Press-fit outer diameter tolerance" Proven record of guaranteeing a range of 15μ after surface treatment By reducing the restrictions on piping layouts for units that require liquid cooling, it also contributes to a reduction in pressure loss.

• Piping Materials
• Other Auto Parts
• Electrical equipment parts