澁谷工業 Product Lineup

Adopting a large overhead index (turret type) with a φ600mm 24-head configuration. The spacious layout allows for the incorporation of up to 8 measurement stations and high-precision AOI. It features a combined tray supply and tape feeder supply, with storage that can sort into three JEDEC trays, and BIN classification (10 categories) is also possible. Additionally, by combining it with an optional tracking function, a highly reliable shipping format can be achieved.

• Visual Inspection Equipment
• Automatic sorting machine
• Other electronic parts

In the production of CNT water dispersion, it is important not only to break down agglomerates but also to maintain a dispersed state. CNTs tend to agglomerate strongly at the nanoscale, and even after dispersion, re-agglomeration can occur, making stable quality assurance a challenge. This system consistently controls the process from dispersion to stabilization through inline continuous operation. It maintains a uniform dispersion state while suppressing excessive shear, preventing re-agglomeration. It accommodates water-based and low to medium viscosity conditions, contributing to the stabilization of CNT dispersion quality and improving reproducibility in mass production processes. Furthermore, by optimizing dispersion conditions and residence time, it is possible to suppress variations in the dispersion state and continuously ensure stable quality. It also supports consistent scale-up design from the lab to mass production, aiding in the stable manufacturing of CNT dispersion.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the positive electrode slurry of lithium-ion batteries, the ability to uniformly disperse active materials, conductive agents, and binders affects the coating properties, electrode quality, and stability of battery performance. In actual production environments, issues such as clumping during powder addition, aggregation of conductive materials, poor mixing due to increased viscosity, and variations in dispersion between batches often arise. Even if there are no problems during the research phase, it is not uncommon for these issues to hinder reproducibility in mass production. This system designs the entire process of positive electrode slurry, including powder supply, input conditions, dispersion energy, circulation conditions, and formulation processes, to suppress dispersion inconsistencies and undispersed materials. By focusing on process design rather than just the equipment itself, it supports consistent scale-up and reproducibility from laboratory validation to mass production lines. It is also possible to consider conditions tailored to the positive electrode materials and formulation conditions.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

The performance of adhesives greatly depends on the dispersion state of fillers and additives, and even slight differences in dispersion can affect adhesion strength, durability, and appearance quality. Particularly in highly filled systems, issues such as clumping, undispersed particles, and poor mixing due to viscosity increases are likely to occur, leading to variations in dispersion and quality due to sedimentation and separation. These challenges often stem not from the equipment alone but from input conditions, dispersion conditions, and process composition, manifesting as problems that cannot be reproduced during mass production. In this service, we conduct dispersion tests based on the customer's materials and formulation conditions to evaluate the dispersion state, viscosity characteristics, and their impact on adhesive performance. Furthermore, we perform scale-up verification using small machines and pilot equipment to clarify the reproducible conditions for mass production. By conducting thorough verification that delves into process design, we support quality stability and reduction of development time.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the dispersion process of resin materials, the dispersion state of fillers and additives greatly influences product performance. Issues such as strength reduction due to poor dispersion, appearance defects, variability in functional characteristics, and viscosity fluctuations are likely to occur, especially in high-fill and nano-filler systems where dispersion difficulty increases. Additionally, even if there are no problems during the prototype stage, it is often seen that the same quality cannot be reproduced during mass production. This service conducts dispersion tests tailored to material properties and formulation conditions, evaluating dispersion state, viscosity characteristics, and reproducibility. Furthermore, through scale-up verification using small machines and pilot equipment, risks during the transition to mass production are visualized in advance. This is not just a simple test; by delving into process design, we support quality stability and productivity improvement.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

The quality of protein products is greatly influenced by their dispersion state. In particular, powdered protein often faces challenges such as clumping during dissolution in water or solvents, uneven dispersion, and poor mouthfeel. Additionally, changes in formulation or raw materials can alter viscosity and dispersibility, leading to cases where there are no issues during prototyping but quality becomes unstable during mass production. This service conducts dispersion tests tailored to raw material characteristics and formulation conditions, verifying the suppression of clumping, improvement of dispersibility, and enhancement of mouthfeel. Furthermore, through process design aimed at scaling up from the lab to small machines and mass production equipment, we establish reproducible manufacturing conditions. We can support evaluations from the prototyping stage to pre-mass production verification.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the manufacturing of lithium-ion batteries (LiB), the dispersion quality of the positive and negative electrode slurries and conductive material pastes significantly affects battery performance, lifespan, and safety. On-site challenges include clumping during powder input, agglomeration of conductive materials, poor mixing due to increased viscosity, and variability between batches. Particularly in the research phase, issues may not arise, but many cases are observed where they cannot be replicated during mass production. Many of these challenges stem not from individual equipment but from the entire process, including input conditions, dispersion energy, fluid design, and process configuration. This system is designed to provide a consistent approach from powder supply to dispersion and formulation, establishing an optimal dispersion process tailored to material properties and formulation conditions. By designing with the same logic from the lab to small machines, pilot, and mass production lines, reproducibility and quality stability during scale-up are achieved. It is also capable of accommodating process design according to the characteristics of the positive electrode, negative electrode, and conductive materials.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In conductive paste using CNT (carbon nanotubes), the strength of aggregation and the difficulty of dispersion are challenges. If not sufficiently dispersed, a conductive network will not form, leading to unstable performance; on the other hand, excessive shear can lead to the destruction of the CNT structure, making the optimization of dispersion conditions essential. Furthermore, even slight differences in the dispersion state can significantly affect viscosity and conductivity, becoming a factor in quality variation during mass production. This system appropriately breaks down CNT aggregation while maintaining structure through process design that includes powder input, wetting processes, dispersion energy control, and circulation conditions. It is designed with the same logic from the lab to mass production, achieving a balance between conductivity and reproducibility.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

Negative electrode slurry (graphite, Si-based) tends to have high solid content and high viscosity, making it a challenging material for mixing and dispersion. Issues such as clumping during powder addition, poor binder dispersion, mixing failures due to increased viscosity, and variations in coating properties are common, especially with Si-based materials, where the dispersion state directly affects battery performance and lifespan. Additionally, there are many cases where dispersion can be achieved in the research phase but cannot be reproduced during mass production. This system is designed to optimize the entire process from powder supply to dispersion and formulation, optimizing input conditions, dispersion energy, and fluid design. It achieves uniform dispersion even under high viscosity conditions and ensures reproducibility through consistent scale-up design from the lab to mass production. We propose the optimal process tailored to material properties and formulation conditions.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the dispersion process of battery slurry, it is often observed that while dispersion can be achieved without issues during the research phase, it cannot be replicated during mass production, leading to quality problems. This is particularly true for positive and negative electrode slurries and CNT conductive materials, where variations in powder input conditions, dispersion energy, viscosity changes, and differences in process configuration can significantly alter the dispersion state and coating properties. Our service conducts dispersion tests at the lab scale based on the customer's materials and formulation conditions, evaluating the dispersion state, viscosity characteristics, and reproducibility. Furthermore, we support scale-up verification using small machines and pilot equipment, visualizing risks during mass production in advance. This is not just a simple test; through verification that delves into process design, we assist in reducing troubles during the transition to mass production and shortening the startup period.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the manufacturing of protein drinks, issues such as "clumping," "residue," and "sedimentation/separation" are not merely due to insufficient stirring, but are caused by factors such as powder input conditions, wettability, and the design of mixing and dispersion processes. Particularly during high-concentration formulations or the addition of functional materials, variations in quality and reduced reproducibility become problematic. Shibuya Kogyo's solid-liquid mixing and dispersion system is designed as an integrated solution from powder supply to mixing, dispersion, and formulation, enhancing the solubility and dispersion stability of proteins. Through process optimization tailored to material properties and viscosity conditions, it achieves clump suppression, uniform dispersion, and prevention of sedimentation. We provide consistent support from the research and development stage to mass production equipment, ensuring quality reproducibility during scale-up. This contributes to stable production and quality improvement in food applications. Please consult us about your current challenges.

• Dispersion/emulsification equipment/homogenizer
• Powder Supply Device
• Beverage Production Equipment

This is a solid-liquid mixing system designed to solve issues such as dispersion variability and agglomeration that arise in battery and electronic materials slurries, starting from process design. It optimizes dispersion, mixing, and supply as a single integrated system, achieving highly reproducible slurry production. It accommodates electrode slurries, high-viscosity slurries, and nanoparticle dispersions, enabling stable production through inline continuous processing. It supports consistent scale-up from research and development to mass production, balancing quality and productivity. If you are facing challenges with slurry dispersion, please feel free to consult us. We can also offer proposals for test verification and process design.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

Cellulose nanofiber (CNF) is being utilized in a wide range of fields such as automotive, food, and cosmetics as a next-generation material with high strength and lightweight properties. However, CNF has strong cohesiveness and high viscosity, which can lead to challenges such as "clumping," "poor dispersion," and "mixing issues due to increased viscosity," making stable dispersion difficult. In particular, poor wetting during powder addition and incompatibility in shear conditions and fluid design can easily lead to variations in dispersion quality and reduced reproducibility, often resulting in cases where consistent quality cannot be reproduced during scale-up. Shibuya Kogyo's solid-liquid mixing and dispersion system optimizes the entire process, including powder supply, addition conditions, dispersion processes, and fluid design, according to the characteristics of CNF. This is not just about selecting equipment; it achieves stabilization of dispersion quality and improvement of reproducibility from a process design perspective. Furthermore, by designing the entire process consistently from dispersion to formulation and CIP cleaning, it also contributes to reducing losses between processes and lowering equipment load. With consistent support from research and development to mass production startup, we assist in solving the challenges of the CNF dispersion process. You can view the concepts of process design and case studies on our official website. Please feel free to contact us first.

• Emulsifier/Disperser
• Dispersion/emulsification equipment/homogenizer
• Emulsifying and dispersing machine

Achieve the optimal sterile testing environment for your needs through the combination of 3 to 5 glove operation modules and each module!

• isolator

This is a taping machine that supports work sizes up to 15mm. By combining a ceiling-mounted index and a sub-index, it enables high-precision image inspection and shape inspection before packaging.

• Taping Machine

■High-Speed Processing Stable high-speed processing has been achieved through index drive using servo motors and reducers, probe operation via direct motor drive, and direct drive in the sorting section. ■Support for Diverse Inspections Flexibly accommodates various inspections such as optical property tests using integrating spheres, electrical property tests, and appearance inspections. ■Automatic Recovery Function from Work Jams By automatically discharging work jams at the disk entry point without operator intervention, the system improves operational efficiency.

• Automatic sorting machine
• Chip type LED
• Sorting machine

This is a ceiling-mounted nozzle-type taping machine with high versatility. The ETM465R features a sub-index in addition to the standard index, and it supports optical measurement, characteristic inspection, and appearance inspection mechanisms required for LEDs. Additionally, it is equipped with a repair function for appearance inspection after tape insertion, aimed at reducing labor.

• Taping Machine
• Chip type LED

<Overview> This machine is a taping machine that can accommodate various inspections by combining a nozzle-type first index and a disk-type second index. <Features> - Second Index The disk-type index allows for the processing of surface inspections of workpieces, such as precise optical inspections of LEDs, while maintaining processing speed. - Classification Function (Optional) It is possible to classify workpieces based on various inspection results, such as optical and appearance inspections (up to 6 classifications). - Automatic Repair Function The machine performs posture and appearance inspections of workpieces stored in the tape, automatically ejecting defective workpieces and reinserting good ones, eliminating the need for operator repair work and enhancing productivity. - 5-Surface Inspection (Optional) By adopting a detachable inspection unit, it can simultaneously conduct appearance inspections of five surfaces, including the side and bottom of the workpiece, at one station.

• Automatic sorting machine
• Taping Machine
• Chip type LED

Features 1. By adopting a disk-type index unit, we have achieved high-speed work transportation. ▪ Classification Function It is possible to classify workpieces based on various inspection results such as characteristic inspection and appearance inspection (up to 6 classifications). ▪ Automatic Repair Function The posture and appearance inspection of workpieces stored on the tape are performed, automatically ejecting defective workpieces and reinserting good workpieces, eliminating the need for operator repair work and enhancing productivity.

• Oscillator
• Taping Machine
• High frequency/microwave parts

This is a test taping machine that can accommodate tray supply, tube supply, parts feeders, reel supply, and more. By adopting a large overhead indexing system, it is possible to incorporate many measurement stations and high-precision AOI. When combined with the optional tracking feature, it can achieve a highly reliable shipping format.

• Other electronic components and modules
• Taping Machine
• Visual Inspection Equipment

This machine generates superheated steam at a maximum temperature of 300°C and fills the interior, allowing food to be heated in a continuous baking process under extremely low oxygen conditions.

• others

We are pleased to hear that you are doing well. Thank you very much for your continued support. We are excited to announce that our company will be exhibiting at the "13th High-Performance Plastics Exhibition - Plastic Japan" (Makuhari Messe). We will be showcasing the following equipment at our booth, and we would be delighted if you could stop by despite your busy schedule. * Inline Continuous Powder-Liquid Mixing and Dispersion System * Tabletop Inline Dispersion Device * Small Ultrasonic Dispersion Device * Ultrasonic Generator These products utilize continuous mixing and dispersion technology, which dramatically improves production efficiency compared to traditional batch methods. All of our staff are looking forward to welcoming you to our booth. 【Event Information】 * Dates: October 29 (Tuesday) to October 31 (Thursday), 2024 10:00 AM to 6:00 PM (until 5:00 PM on the last day) * Booth Number: Hall 6, Booth Number 35-26 (Plastic Japan Area) * For more details about the exhibition, please refer to the related links. You can download the PDF for more information or feel free to contact us.

• Emulsifier/Disperser
• Powder Supply Device
• Dispersion/emulsification equipment/homogenizer

We powerfully clean and strip dirt using a combination of media such as baking soda and high-pressure water. Our unique nozzle allows for wet blast cleaning, effectively removing dirt while minimizing damage to the items being treated. Since it is attached to a vehicle, it can be transported anywhere. If you are struggling with paint stripping, rust, or stubborn dirt, we can conduct tests at our factory. Please contact us.

• others

This machine is a commercial cleaning device equipped with a high-pressure water pump and a high-efficiency boiler, capable of removing dirt with high-pressure hot water. It has wheels, making it portable anywhere. The nozzle employs our unique Natural Mix Air Jet system, which allows for more powerful dirt removal by automatically drawing in air without using a compressor. Additionally, the wide nozzle enables cleaning a large area in a short time. We accept cleaning tests at our factory. If you are struggling with stubborn oil stains, mold, or rust removal, please feel free to contact us.

• others

This machine is a high-precision bonder for the production of optical communication modules/optical devices suitable for mass production. It also supports flip-chip mounting. It enables ultra-high-precision mounting of microchips on supplied substrates using a two-point recognition method. It is a compact device that integrates chip/substrate supply and finished product storage. Shibuya Kogyo has many years of experience in optical communication modules and optical devices. The FDB210P is one of the devices that incorporates years of know-how.

• Other semiconductor manufacturing equipment

This machine performs flux printing and ball mounting on the supplied substrate. By connecting inspection and repair machines, it enables higher quality production.

• Other semiconductor manufacturing equipment

The occurrence of "agglomeration," "cohesion," and "viscosity increase" in dispersion processes is caused not by the equipment but by the design of the process. Poor wetting during powder input and unsuitable dispersion conditions lead to quality variations and poor redispersion, significantly compromising stability during mass production. Additionally, during scale-up, it is often impossible to reproduce the same conditions, resulting in unexpected troubles. Furthermore, every time there is a change in materials or formulations, new conditions must be established, increasing the burden of development and mass production. Shibuya Kogyo's solid-liquid mixing and dispersion system is designed to provide a consistent process from powder supply to dispersion, formulation, and CIP cleaning. By optimizing the entire process, including material properties, input conditions, and fluid design, we stabilize dispersion quality and reproducibility. Moreover, optimization across the entire line contributes to reducing losses between processes and lowering equipment load. It is not just a dispersion machine but a dispersion system that governs the entire process. By building quality from the design stage, we achieve shorter startup times and improved yields. We also provide consistent support from equipment selection to startup, reducing the burden on the site. We propose the optimal dispersion process tailored to your materials and process conditions. Please consult us about your current challenges. We support you from initial considerations to mass production startup.

• Dispersion/emulsification equipment/homogenizer
• Emulsifying and dispersing machine
• Emulsifier/Disperser

This is an inline solid-liquid mixing and dispersion system for inks (paints). It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With the exceptional engineering technology cultivated in our plant business, we provide tailored solutions to meet diverse needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating clumps. 2. Depending on the combination of equipment, it can accommodate both continuous and batch processes. 3. We offer total engineering solutions tailored to user needs. *We are currently providing materials that introduce examples of equipment combinations such as slurry-type and batch-type.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

This is an inline solid-liquid mixing and dispersion system for electronic materials. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated in the plant business, we respond individually to a variety of needs. 【Features】 1. Our unique dispersion system enables the mixing and dispersion of fine powders in a short time without generating lumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We provide total engineering tailored to user needs. *We are currently offering materials that introduce examples of equipment combinations such as slurry and batch systems.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the manufacturing of battery material slurries, dispersion quality is a crucial factor that influences product performance. However, in high-concentration slurries, challenges such as the formation of clumps during powder addition, aggregation of nanoparticles, and decreased fluidity due to increased viscosity can arise, leading to quality variations and reduced productivity. Additionally, during scale-up, it can be difficult to reproduce conditions, which may lead to issues in mass production. Our inline solid-liquid mixing and dispersion system is designed for a seamless process from powder supply to dispersion, formulation, and CIP cleaning. By optimizing the entire process, including material properties, input conditions, and fluid design, we stabilize dispersion quality and reproducibility. In battery materials, frequent changes in formulation and material lot differences often require resetting conditions, making it challenging to maintain a stable dispersion state. Our system optimizes dispersion conditions throughout the entire process, flexibly responding to these variable factors and achieving quality stability and improved reproducibility. Not just a simple dispersion device, but a dispersion system that governs the entire process, it is capable of supporting everything from the development stage of battery materials to mass production lines. For those struggling with clumps, aggregation, and viscosity increases in battery material slurries, we propose the optimal dispersion process tailored to material characteristics and process conditions. Please consult us about your current challenges.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

This is an inline solid-liquid mixing and dispersion system for resin materials. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we cater to a wide range of individual needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating clumps. 2. Depending on the combination of equipment, we can accommodate both continuous and batch processes. 3. We provide total engineering tailored to user needs. *We are currently offering materials that introduce examples of equipment combinations such as slurry and batch systems.

• Other processing machines

This is an inline solid-liquid mixing and dispersion system for adhesives. It is a groundbreaking system that performs the mixing and dispersion of various fine powders and liquids inline. With our exceptional engineering technology cultivated through our plant business, we can individually respond to a variety of needs. 【Features】 1. Our unique dispersion system achieves the mixing and dispersion of fine powders in a short time without generating clumps. 2. Depending on the combination of equipment, it can accommodate both continuous and batch processes. 3. We provide total engineering tailored to user needs. *We are currently offering materials that introduce examples of equipment combinations such as slurry-type and batch-type.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

In the manufacturing of resin materials, dispersion quality affects product performance and appearance quality. Particularly in formulations containing fillers, dispersion unevenness and agglomeration are likely to occur, leading to issues with strength, functional characteristics, and appearance defects. Additionally, in high-viscosity systems, poor mixing and viscosity variations can easily arise, making it challenging to ensure quality. Furthermore, during scale-up, reproducing dispersion conditions can be difficult, resulting in cases where quality is not stable during mass production. Shibuya Kogyo's inline solid-liquid mixing and dispersion system designs the dispersion process throughout the entire process according to the characteristics of the resin and fillers. It optimizes everything from powder supply to dispersion, formulation, and CIP cleaning in a consistent manner, achieving uniform dispersion while suppressing dispersion unevenness and agglomeration. It establishes optimal dispersion conditions based on material properties and viscosity conditions, stabilizing reproducible quality. For those struggling with dispersion unevenness or viscosity variations in resin materials, we propose optimal dispersion processes tailored to material properties and process conditions. Please consult us about your current challenges. We also accommodate dispersion of not only fillers but also nanoparticles and functional materials. For details on electronic material dispersion, please refer to the related links.

• Emulsifier/Disperser
• Vacuum degassing machine
• Dispersion/emulsification equipment/homogenizer

The TM288P adopts a pick-and-place type indexing conveyor system. It can accommodate measurement positions (up to 8 locations), laser marking, and appearance inspection (top/side/bottom) within the index.

• Other electronic parts

The SPF4125 model "Falcon-S48" can process a wide range of general structural rolled steel materials (SSS materials) with a thickness of 0.1 mm to 12 mm, within a processing area of 1250 mm x 1259 mm. The full cover of the main body is equipped with a sliding mechanism, allowing it to open and close manually via a handle or automatically, facilitating the loading and unloading of workpieces from three sides and the top. Furthermore, by incorporating a self-manufactured laser oscillator with an output of 2 kilowatts into the main processing machine, it achieves one of the smallest installation footprints in the industry for laser processing machines of the same size, measuring 2490 mm in width, 4940 mm in depth, and 2306 mm in height. Additionally, a pull-out chip bucket is provided at the bottom, making it easy to handle leftover materials such as chips that fall from the table.

• Other machine tools

Shibuya Industrial Co., Ltd. will be exhibiting at "MF-TOKYO 2023," which will be held at Tokyo Big Sight from July 12 (Wednesday) to July 15 (Saturday), 2023. We will be showcasing our new 2D fiber laser processing machine "SPF4125," designed for a processing area of 4'×8'. This ultra-compact device features a processing range of 1250×2550mm and has a 2kW oscillator built into the main body of the machine. During the exhibition, we will conduct live demonstrations with narration. We invite you to experience the processing performance firsthand. Additionally, we are currently showcasing our lineup of fiber laser processing machines! You can view them immediately by downloading the PDF linked below. 【Exhibition Overview】 ■ Dates: July 12 (Wednesday) to July 15 (Saturday), 2023 ■ Hours: 9:00 AM to 5:00 PM (until 4:00 PM on the last day) ■ Location: Tokyo Big Sight, East Hall 7 ■ Booth Number: 7-10 ■ Exhibits: 2D fiber laser processing machine "SPF4125/SFX2000D" *For more details, please refer to the related links or feel free to contact us.

• Other processing machines

The "FWL1500SH" is a fiber laser welding machine with a swing function and a handheld torch specification. It is equipped with a 1500W oscillator, allowing it to weld thicker materials than the FWL1000SH. With the addition of the swing head, it is capable of welding materials with gaps. It consumes less power, reducing running costs, and features a space-saving, compact design. It enables continuous oscillation to achieve clean beads, providing excellent welding strength and penetration depth. 【Features】 - Capable of welding materials with gaps due to the swing head - Achieves excellent welding strength and penetration depth - Allows for continuous oscillation to obtain clean beads - Consumes less power, reducing running costs - Requires fewer consumables and is easy to maintain - Space-saving, compact design - Built-in chiller

• Other machine tools

Standard equipped with a damage sensor that absorbs the impact of the processing head and nozzle with the power of springs. Supports horizontal rotation axis (C-axis) ±720°. Enables high-speed and high-quality processing of aluminum and high-tensile materials, aimed at the next-generation automotive industry. By adopting offline teaching (optional), setup time is significantly reduced.

• Other processing machines

■High-Speed Processing Stable high-speed processing has been achieved through index drive using servo motors and reducers, probe operation with direct motor drive, and direct drive in the sorting section. ■Support for Diverse Inspections Flexible support is provided for optical characteristic inspections, electrical characteristic inspections, appearance inspections, and more. ■Automatic Recovery Function from Work Jams By automatically discharging the work from the disk entry section without operator intervention, the system improves operational efficiency by recovering from work jams.

• Chip type LED
• Other inspection equipment and devices
• Automatic sorting machine

The "HCP Series" is a versatile hydraulic press that excels in a variety of applications. It achieves top-class rigidity and can accommodate special specifications (optional). Additionally, the adoption of a sequencer makes it easy to support automation. Please feel free to contact us when you need assistance. 【Features】 ■ Energy-saving achieved through inverter control ■ Easy support for automation with the adoption of a sequencer ■ Significantly improved operability with the use of a touch panel ■ Achieves top-class rigidity ■ Special specifications can be accommodated (optional) *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

The "NSN Series" is a deep drawing hydraulic press equipped with an NC die cushion (20 stages) as standard. The idling stop function achieves energy savings and also reduces the amount of operating oil used. Additionally, options such as a "slide knockout device" and "low-pressure die cushion" are available. 【Features】 ■ Pressure speed can be set in 5 stages ■ NC die cushion (20 stages) ■ Motion monitor function that allows monitoring of conditions during forming ■ Repetition stop accuracy at the lower limit position is within ±0.2mm of the set value (after several demo operations) ■ Energy savings achieved through the idling stop function, reducing the amount of operating oil used ■ Equipped with a warm-up operation mode *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

We would like to introduce our cold forging hydraulic press, the 'NCH Series.' The repeat stop accuracy at the bottom dead center position is within ±0.2mm of the set value (after several demo operations). Additionally, the idling stop function achieves energy savings. Please feel free to contact us when you need assistance. 【Features】 ■ Pressure speed can be set in five stages ■ Equipped with a motion monitor function that allows monitoring of conditions during forming ■ Repeat stop accuracy at the bottom dead center position is within ±0.2mm of the set value (after several demo operations) ■ The idling stop function achieves energy savings and reduces the amount of operating oil used ■ Equipped with a warm-up operation mode *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

The SPF4112 model "FALCON-S/Fiber" is a fiber laser processing machine that integrates a 2KW fiber laser oscillator and control unit into the main body of the machine, achieving a compact footprint of 2.45m, thus realizing space-saving and ultra-compact design. Compared to the carbon dioxide lasers that have been the mainstream in laser processing machines, fiber lasers do not require laser gas and are energy-efficient, enabling low running costs. Additionally, due to the difference in wavelength, high-speed processing of thin steel plates and cutting of highly reflective materials such as aluminum and brass have become easier. This machine is a user-friendly model that emphasizes "ease of use" by incorporating customer feedback. To improve operability, it features a larger monitor, standardized placement of operation switches, and a rotary control panel, making it adaptable to any working scene. Furthermore, the processing restart function helps reduce the workload for customers. It is a processing machine that can meet various needs regarding installation location, workability, processing capability, and reduction of processing time!

• Other machine tools

■High-speed processing Stable high-speed processing has been achieved through index drive using servo motors and reducers, probe operation via direct motor drive, and direct drive in the sorting section. ■Supports various inspections ■Automatic recovery function from work jams By automatically discharging the disk entry section, the system can recover from work jams without operator intervention, thereby improving operational efficiency.

• Automatic sorting machine
• Other semiconductor manufacturing equipment
• Oscillator

■High-Speed Processing Stable high-speed processing has been achieved through index drive using servo motors and reducers, probe operation via direct motor drive, and direct drive in the sorting section. ■Support for Diverse Inspections In addition to the optimal side contact method for top-view LEDs, which are commonly used for backlighting and lighting applications, a contact method from above that can also accommodate side-view LEDs is available. ■Large Capacity Bin Box By adopting a large capacity bin box that can hold 5,000 medium-sized LEDs equivalent to 5630 size, operational efficiency has been improved. ■LED Compatibility for Backlight Units Improvements in the sorting section allow for high-speed and stable processing for backlight unit LEDs equivalent to 5630 size.

• Automatic sorting machine
• Chip type LED
• Light (color) sorting machine