ALMEDIO INC. Product Lineup

Carbon nanofibers (CNF) are functional fillers that form a uniform conductive network in resins due to their excellent dispersibility, enabling stable performance. This contributes to improved thermal conductivity as a thermal management solution in electronic components, as well as effective electrostatic discharge performance required in FOUPs (Front Opening Unified Pods) for semiconductor transport applications. As a high-performance material, it helps solve challenges in a wide range of electrical and semiconductor fields. 【Application Scenarios】 - Strength enhancement and electrostatic discharge applications for FOUPs (semiconductor wafer transport containers) - Various resin components within semiconductor manufacturing equipment (trays, cassettes, guide parts, etc.) - Packaging materials and trays for electronic components - Heat dissipation components for electronic parts and enclosures (thermal management applications) 【Benefits of Implementation】 - Reduced risk of particle adhesion due to electrostatic discharge performance - Reduced performance variation due to excellent dispersibility - Lower risk of device damage from static electricity - Efficient thermal management enabled by improved thermal conductivity

• Composite Materials
• Secondary Cells/Batteries
• plastic

In the electronics industry, effective heat dissipation measures are required due to the increasing density of devices. Materials with low heat dissipation performance can lead to a decline in device performance and potential failures. Our carbon nanofibers (CNF) are easy to disperse at high concentrations and can enhance thermal conductivity when added to resins, thereby improving heat dissipation performance. Metal alternatives can also be considered. 【Application Scenarios】 - Heat dissipation sheets and films 【Benefits of Implementation】 - Improved device performance - Extended product lifespan

• Composite Materials
• Secondary Cells/Batteries
• plastic

In the automotive industry, reducing vehicle weight is a crucial challenge for improving fuel efficiency and minimizing environmental impact. It is required to replace metal components with lightweight materials to decrease the overall weight of the vehicle and enhance fuel efficiency. However, materials that achieve weight reduction often face challenges in terms of strength and durability. Our carbon nanofibers (CNF) enable metal alternatives and contribute to the lightweighting of vehicles. 【Application Scenarios】 - Body components - Interior components - Engine components 【Benefits of Implementation】 - Improved fuel efficiency through weight reduction - Enhanced durability of components - Increased design flexibility

• Composite Materials
• Secondary Cells/Batteries
• plastic

Our company develops, produces, and sells carbon nanofibers (CNF), which are expected to be utilized in a wide range of industries. These are milled fibers with an aspect ratio of diameter = 200–800 nm and length = 1–20 µm. The diameter of carbon nanotubes (CNT) ranges from 0.4 to 50 nm, and they are known to easily aggregate; however, our carbon nanofibers (CNF) are characterized by their ease of high-concentration addition and dispersion. By adding CNF in high concentrations to resins, it is possible to enhance electrical conductivity, thermal conductivity, rigidity, lubricity, and electromagnetic wave absorption, making it feasible to consider alternatives to metals. ■ Main Applications - Conductive additives for lithium-ion batteries - Static electricity prevention applications, etc. - Heat dissipation sheets and films - High-strength and high-elasticity applications - Materials for 3D printers (improving the strength of printed products) - Electromagnetic wave absorption and reflection suppression in high-frequency bands - Corrosion resistance Compounding processing with thermoplastic resins (such as PP, PE, PA, PBT, PPS, POM, PEEK, etc.) is also possible. *For more details, please refer to the PDF data available by downloading the catalog.

• Composite Materials
• Secondary Cells/Batteries
• plastic

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we offer a variety of lineups. Please check the "Product and Service List" at the bottom of the page.

• Other metal materials

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we offer a variety of lineups. Please check the "Product and Service List" at the bottom of the page.

• others

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we offer a variety of lineups. Please check the "Product and Service List" at the bottom of the page.

• others

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we have a variety of lineups available. Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

Our company offers a wide range of high-quality **silicon and silicon compounds (Si, SiO, SiC, Si/C, etc.)** for secondary battery materials, resin additives, and various industrial materials. We support our customers from research and development to mass production with high purity, stable supply, and the ability to accommodate small lot sizes.

• Ceramics
• Secondary Cells/Batteries
• Lithium-ion battery

It is a milled fiber with a diameter of 200 to 800 nm and a length of 1 to 20 µm, having a fibrous aspect ratio. This material can achieve higher thermal conductivity and electrical conductivity than carbon nanofibers used for conductivity. As a powder filler, it has a thermal conductivity of over 900 W/mK and a volume resistivity of less than 10^-6 Ωm.

• others

It is a milled fiber with a diameter of 200 to 800 nm and a length of 1 to 15 µm, having a fibrous aspect ratio. This material has higher dispersibility than carbon nanofibers used for conductivity and can achieve higher thermal and electrical conductivity. As a powder filler, it has a thermal conductivity of over 550 W/mK and a volume resistivity of less than 10^-5 Ωm.

• others

It is a milled fiber with a diameter of 200 to 800 nm and a length of 1 to 20 µm, having a fibrous aspect ratio. This material has a higher degree of graphitization than carbon nanofibers used for reinforcement, allowing for higher thermal and electrical conductivity. As a powder filler, it has a thermal conductivity of over 500 W/mK and a volume resistivity of less than 10^-5 Ωm.

• others

This is a milled fiber with a diameter of 200 to 800 nm and a length of 1 to 15 µm, exhibiting a fibrous aspect ratio. The diameter of carbon nanotubes (CNT) ranges from 0.4 to 50 nm, and they are known to be prone to aggregation; however, this carbon nanofiber (CNF) is characterized by its ease of high-concentration addition and dispersion. By adding CNF in high concentrations to resin, it is possible to enhance electrical conductivity, thermal conductivity, rigidity, lubricity, and shielding properties, making it feasible to consider alternatives to metals. Additionally, by utilizing thermoplastic resins, it can be molded at high speed and become a sustainable composite material. As a powder filler, it has a thermal conductivity of over 100 W/mK and a volume resistivity of less than 10^-5 Ωm.

• others

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. Additionally, we have a variety of other products available. Please check the "Product and Service List" at the bottom of the page.

• Other metal materials

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. In addition, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

Silicon (silicon: Si) is very abundant in the Earth's crust and is the second most abundant element after oxygen. We can accommodate quantities ranging from small amounts to tons. Please feel free to contact us. Additionally, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

We can accommodate quantities from small amounts up to t units. Please feel free to contact us. Additionally, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Secondary Cells/Batteries
• Lithium-ion battery

Silicon (silicon: Si) is very abundant in the Earth's crust and is the second most abundant element after oxygen. We can accommodate quantities ranging from small amounts to tons. Please feel free to contact us. In addition, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Secondary Cells/Batteries
• Lithium-ion battery

Silicon (silicon: Si) is very abundant in the Earth's crust and is the second most abundant element after oxygen. We can accommodate quantities ranging from small amounts to tons. Please feel free to contact us. We also offer "high-purity silicon powder with a purity of 99.999% (5N)." Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

Silicon (silicon: Si) is very abundant in the Earth's crust and is the second most abundant element after oxygen. We can accommodate quantities ranging from small amounts to tons. Please feel free to contact us. In addition, we offer a variety of other products. Please check the "Product and Service List" at the bottom of the page.

• Non-ferrous metals
• Other metal materials
• Ceramics

This is an introduction to the "Carbon Nanofiber/Carbon Microfiber" that our company handles. The "Carbon Nanofiber" manufactured by Almedio has a fiber-like aspect ratio with a diameter of 200 to 800 nm and a length of 1 to 20 µm. By adding CNF in high concentrations to resins, improvements in electrical conductivity, thermal conductivity, rigidity, lubricity, and shielding properties can be achieved, making it possible to consider alternatives to metals. We also offer "Carbon Microfiber" with a diameter of 5 to 10 µm and a length of 10 to 25 µm, available in both [reinforcement] and [conductive] lineups. 【Features of Carbon Nanofiber】 ■ Diameter: 200 to 800 nm ■ Length: 1 to 20 µm ■ Easy to add in high concentrations ■ Easy to disperse ■ Possible to consider alternatives to metals *For more details, please refer to the PDF document or feel free to contact us.

• fiber

We offer a lineup of "blankets" suitable for various industrial furnaces, ceramic kilns, and cremation furnaces, as well as "boards" and "blocks" that are vacuum-formed into sheet shapes. 【Featured Products】 ■ Blanket ■ Board ■ Block (Z-type channel, H-type channel) ■ Bulk/Adhesive ■ Paper *For more details, please download the PDF or contact us.

• Other safety and hygiene products