IMCDジャパン Product Lineup

"RODEM" is a concrete modification waterproofing material that achieves concrete densification and high waterproofing properties through the infiltration of nanoparticles. The generated special nano-crystals reappear and self-repair cracks when water penetrates the concrete during crack formation. Additionally, since the structure is completely inorganic, there is no concern about deterioration from water or ultraviolet rays like organic materials, nor is there a risk of mold growth. [Main Effects] ■ Toughness and re-alkalization ■ Waterproofing ■ Crack repair ■ Leak repair ■ Mold prevention ■ Adhesion *For more details, please refer to the PDF document or feel free to contact us.

"Chopped Strand Mat" is a non-woven reinforcement material suitable for unsaturated resins and vinyl ester resins. It is produced by spreading continuous filament rovings of 50mm in length, randomly and uniformly dispersed with polyester or emulsion binders. It can be widely used for hand lay-up molding and is also applicable for chemical and water tanks, machine covers, molded parts, and FRP waterproofing work. 【Features】 ■ Uniform thickness, softness, hardness, and minimal glass splintering ■ Good resin impregnation, capable of complete wet-out (treated with moisture-absorbing materials) ■ High-speed and consistent wet-out rate of resin with good manufacturability ■ Good mechanical properties and easy to tear ■ Suitable for modeling complex shapes *For more details, please refer to the PDF document or feel free to contact us.

The "ECR Glass Series" is a glass fiber that excels in acid resistance, water resistance, and heat resistance. It has mechanical strength that surpasses E-glass and electrical properties equivalent to E-glass. Additionally, the composition of the glass fiber does not contain boron (B2O3) or fluorides (F2). 【Features】 ■ Durability ■ Mechanical strength and electrical properties ■ Chemical properties ■ Maintains high strength even in harsh environments ■ High Young's modulus, very resistant to deformation and twisting *For more details, please refer to the PDF document or feel free to contact us.

"Efretan" is a two-component reaction-type fast-curing, solvent-free, low-viscosity liquid urethane resin. It possesses a well-balanced performance required for coating resins and is highly anticipated across a wide range of fields, from civil engineering and construction to home appliances and artistic modeling, as a resource-saving and environmentally friendly coating material. The coating film exhibits excellent elasticity unique to urethane and demonstrates strong properties with outstanding impact resistance. Additionally, it excels in flexibility and chemical resistance, expanding its range of applications. 【Features】 ■ Cures extremely quickly at room temperature after two-component mixing ■ 100% resin, solvent-free, and environmentally friendly ■ Low-viscosity liquid allows for coating without dilution during use ■ Tough coating film with excellent elasticity and impact resistance unique to urethane ■ Good leveling properties, resulting in a smooth, glossy coating film *For more details, please refer to the PDF document or feel free to contact us.

The "NK Flake Method" is a system that enables the reduction of the life cycle cost (LCC) of concrete. It is a method that combines vinyl ester resin FRP, which has excellent chemical resistance, with flake lining, boasting a long track record and high reliability for corrosion protection of flue gas desulfurization equipment, corrosion protection of the bottom plates of oil storage tanks, and corrosion protection of marine structures. This ultra-durable corrosion protection system is designed to suppress corrosion of concrete structures caused by hydrogen sulfide generation and to facilitate maintenance, while also possessing resistance to organic acids. 【Features】 ■ Excellent resistance to sulfuric acid, alkali, and water ■ Excellent resistance to organic acids ■ High adhesion due to the use of a special primer suitable for wet surfaces ■ Flake effect to prevent the penetration of liquids and gases *For more details, please refer to the PDF document or feel free to contact us.

"Nano Material Rodem" is a concrete modification waterproofing material that simultaneously densifies and strengthens concrete while achieving high waterproofing that does not allow any water to pass through. The generated special nano crystals, when water enters the concrete during crack formation, regenerate and repair the cracks themselves, effectively creating a maintenance-free state. Additionally, fine particles penetrate the pores of concrete, stone, tiles, etc., and harden, creating a powerful anchoring effect and demonstrating excellent adhesion. [Features] ■ Achieves concrete densification and high waterproofing through nano particle impregnation ■ Regenerates nano crystals for self-repair when moisture is present ■ Exhibits excellent weather resistance due to the use of completely inorganic materials ■ Realizes significant reductions in construction time and costs with easy application ■ Serves as a waterproof substrate material (adhesive) for tile and stone laying work *For more details, please refer to the PDF document or feel free to contact us.

"Mecha Fine" is a waterproof construction method using environmentally friendly PVC resin sheets. By adopting a heat-insulating waterproof specification (compliant with the Green Purchasing Law), it is possible to suppress the rise in roof surface temperature. The mechanical fastening method reduces waste generated during renovation. 【Features】 ■Reduction of environmental impact ■Cost-effectiveness ■High performance and high quality *For more details, please refer to the PDF materials or feel free to contact us.

"MY Roofer HG" is a water-based acrylic rubber flame-retardant coating waterproofing material that supports waterproofing-related work around roofs with diverse applications and performance. It can be applied as an overlay without removing the existing waterproof layer, reducing the labor and disposal costs associated with the removal of the existing waterproof layer, and allowing for double waterproofing with the existing layer. The primer is compatible with various substrates. 【Features】 ■ Intermittent application possible ■ Use of leftover materials allowed ■ Durability and weather resistance ■ Non-flammable and odorless ■ Reduced removal labor *For more details, please refer to the PDF document or feel free to contact us.

The "Cute FP System" is a reliable FRP lining waterproofing method with a robust seamless waterproof layer. The exposed waterproof layer for walking is lightweight and equipped with excellent waterproofing and durability. The waterproof layer made of elastic polyester follows the movement of the substrate and has excellent adhesion. Additionally, it features a polyester resin waterproof specification that reduces the characteristic odor of polyester resin during construction. 【Features】 ■ Highly reliable waterproof performance ■ Lightweight and durable waterproof layer ■ Excellent adhesion and follows the movement of the substrate ■ Reduces unique odors during construction ■ Easy to install, requiring no special skills or tools ■ Short construction period *For more details, please refer to the PDF document or feel free to contact us.