サンキャスト Product Lineup

Our company is engaged in the production and quality control of lost-wax (precision cast) products. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea, centered around our factory in Dalian, China. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products" characterized by a special mold manufacturing method and casting method. Due to this special mold manufacturing and casting method, molten metal is poured into a highly breathable mold heated to approximately 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure varies from simple two-part molds to complex segmented molds made up of fine components, and no draft angles are necessary. 【Features】 ■ Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces ■ Enables the design and production of integrated structures from multiple parts that were previously assembled after processing ■ Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions ■ Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot *For more details, please download the PDF or contact us.

• Casting Machine

Semi-lost (water glass type lost) is a manufacturing method that started in Russia and has been adopted in China for a long time. The difference from the lost wax process is that, during the mold formation, the binder used to harden the sand is not colloidal silica-based, but rather water glass. This allows for a reduction in cost and lead time. 【Overview】 ■ It is mainly produced using iron-based materials, specifically SCW450. ■ Dimensional accuracy, surface roughness, and the minimum thickness limit are lower compared to lost wax. ■ More complex shapes can be created than with sand casting, so when considering the rough machining costs from sand casting and the total, it can become attractive. ■ The biggest difference from lost wax is that it typically cannot cast stainless steel. *For more details, please download the PDF or contact us.

• Casting Machine

Our company handles "lost wax products" characterized by a special mold manufacturing method and casting method. Due to this special mold manufacturing and casting method, molten metal is poured into a highly breathable mold heated to about 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex segmented molds made up of fine parts, and no draft angles are required. 【Features】 ■ Free design is possible for complex internal shapes that are difficult to machine, as well as for those with three-dimensional curved surfaces. ■ Multiple parts that were previously assembled after processing can be designed and manufactured as an integrated structure. ■ Production is possible for items weighing from a few grams to large pieces weighing around 40 kg, depending on conditions. ■ Depending on the product shape and weight, we can accommodate orders ranging from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.

• Casting Machine

Our company handles "lost wax products," characterized by a unique mold manufacturing method and casting technique. In response to supply uncertainties, including recent natural disasters, we are establishing stable supply sources not only within Japan but also from manufacturers in South Korea. By pouring molten metal into highly permeable molds heated to approximately 1,000 degrees due to this unique mold manufacturing and casting method, the flow conditions of the molten metal improve, allowing for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made up of fine components, and no draft angles are required. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a unique mold manufacturing method and casting technique. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure varies from simple two-part molds to complex split molds made of fine components, and no draft angle is required. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also from manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly breathable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to choose from. Additionally, the mold structure ranges from simple two-part designs to complex split molds made up of fine components, and no draft angles are required. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure varies from simple two-part molds to complex segmented molds made of fine components, and no draft angles are necessary. **Features** - Free design capabilities for complex internal shapes that are difficult to machine, as well as for three-dimensional curved surfaces. - Ability to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made up of fine components, and no draft angles are necessary. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after machining. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made of fine components, and no draft angles are required. **Features** - Free design is possible for complex internal shapes that are difficult to machine or for those with three-dimensional curved surfaces. - Multiple parts that were previously assembled after processing can now be designed and manufactured as an integrated structure. - Products can be made from a few grams to large items weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex segmented molds made of fine components, and no draft angles are required. **Features** - Free design is possible for complex internal shapes that are difficult to machine or for those with three-dimensional curves. - Multiple parts that were previously assembled after processing can now be designed and manufactured as an integrated structure. - Products can be made from a few grams to large items weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders ranging from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex segmented molds made up of fine components, and no draft angles are required. 【Features】 - Free design possibilities for complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Ability to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing method and casting method, molten metal is poured into highly breathable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made up of fine components, and no draft angles are required. 【Features】 - Free design is possible for complex internal shapes that are difficult to machine or for those with three-dimensional curves. - Multiple parts that were previously assembled after processing can now be designed and manufactured as an integrated structure. - We can produce items ranging from a few grams to large pieces weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.

• Casting Machine

Our company handles "lost wax products," characterized by a unique mold manufacturing method and casting technique. In response to supply uncertainties, including recent natural disasters, we are establishing stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the unique mold manufacturing method and casting technique, molten metal is poured into highly breathable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to be selected. Additionally, the mold structure varies from simple two-part molds to complex segmented molds made of fine components, and no draft angles are required. **Features** - Free design possibilities for complex internal shapes that are difficult to machine or for three-dimensional curved surfaces. - Ability to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish a stable supply by not only sourcing within Japan but also by partnering with manufacturers in South Korea as a new supply source. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to around 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made of fine components, and no draft angles are required. **Features** - Free design is possible for complex internal shapes that are difficult to machine, as well as for those with three-dimensional curved surfaces. - It is possible to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - We can produce items ranging from a few grams to large pieces weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also from manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of selectable metal types. Additionally, the mold structure ranges from simple two-part molds to complex split molds made of fine components, and no draft angles are necessary. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish a stable supply not only from within Japan but also by sourcing from manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex segmented molds made up of fine components, and no draft angles are necessary. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish a stable supply by introducing manufacturers from South Korea as new supply sources, in addition to those within Japan. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to around 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made up of fine components, and no draft angles are necessary. 【Features】 - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also from manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly breathable molds heated to approximately 1,000 degrees, improving the flow conditions of the molten metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex segmented molds made of fine components, and no draft angles are necessary. **Features** - Free design is possible for complex internal shapes that are difficult to machine, as well as for those with three-dimensional curves. - It is possible to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - We can produce items ranging from a few grams to large pieces weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a special mold manufacturing method and casting method. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also by partnering with manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving the flow conditions of the metal, which allows for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part molds to complex split molds made of fine components, and no draft angles are necessary. **Features** - Allows for free design of complex internal shapes that are difficult to machine, as well as three-dimensional curved surfaces. - Enables the design and production of integrated structures from multiple parts that were previously assembled after processing. - Capable of producing items ranging from a few grams to large pieces weighing around 40 kg, depending on the conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.*

• Casting Machine

Our company handles "lost wax products," characterized by a unique mold manufacturing method and casting technique. In response to supply uncertainties, including recent natural disasters, we will establish stable supply sources not only within Japan but also from manufacturers in South Korea. Due to the special mold manufacturing and casting methods, molten metal is poured into highly permeable molds heated to approximately 1,000 degrees, improving flow conditions and allowing for a wide range of metal types to be selected. Additionally, the mold structure ranges from simple two-part designs to complex split molds made up of fine components, and no draft angles are required. [Features] - Free design possibilities for complex internal shapes that are difficult to machine or for those with three-dimensional curves. - Capability to design and manufacture integrated structures from multiple parts that were previously assembled after processing. - Production possible from a few grams to large items weighing around 40 kg, depending on conditions. - Depending on the product shape and weight, we can accommodate orders from a few pieces to tens of thousands per lot. *For more details, please download the PDF or contact us.

• Casting Machine