フクダ List of Products and Services

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on consistent quality standards. The judgment results and operational status can be managed via a monitor screen. - Example of target work: Ideal for packaged rice (packaged cooked rice). - Quantitative management of quality standards in the pinhole inspection process. - Ensures the quality of the product's shelf life. - Establishes evaluation criteria for the manufacturing process, achieving quantitative quality assurance. - Can be connected to existing production lines in a slim, space-saving design. - Changeovers for variety switching can be handled quickly by exchanging the chamber. - Since it is completely produced domestically, maintenance and troubleshooting can be addressed promptly. *Please consult us regarding the use of this product for pharmaceuticals.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Example of target work: pillow packaging, pouches, etc. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design allows connection to existing production lines - Quick changeover for product variety switching can be handled in a short time by replacing the chamber - Fully domestically produced, ensuring rapid response for maintenance and troubleshooting *Please consult us regarding the application of this product for pharmaceuticals.

★ Millimeter Wave Radar & LiDAR Leak Tester: Air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300". ★ Leak Tester for Simultaneous Measurement of Workpieces: Measures two workpieces with one unit. By comparing two simultaneously, it can increase the number of operations. ★ Electric Air Regulator for Blood Pressure Monitor Pressure Verification: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak Tester for Automotive Lighting: Can conduct tests at low pressure that does not affect the workpiece (item under inspection). ★ Air Leak Tester Conversion Box/Cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof Testing Device: A device that tests the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.

In the catalog "Comprehensive Product Guide," we introduce the products handled by Fukuda Corporation. As leak testing machines, we offer a lineup tailored to leak rates, including flow meters/flow testers, air leak testers, hydrogen leak detectors, and helium leak test systems. We propose equipment and services that meet our customers' needs, regardless of the industry. [Contents] ■ Flow meters/flow testers ■ Air leak testers ■ Hydrogen leak detectors ■ Helium leak test systems ■ Dedicated airtightness testing equipment for small electronic components ■ Ultra-fine leak test systems Additionally, we have prepared technical materials such as "Technical Manuals" and "Proposals for Measurement Environment Improvement." Please take a look.

This is a masterless air leak tester that does not require an external reference during measurement. It performs differential pressure measurements using an integrated master tank. Since there is no variation in the built-in master itself, stable measurements can always be achieved. Furthermore, this is our top-of-the-line model of the masterless leak tester, which also realizes a reduction in measurement time through mastering measurements. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional)

A versatile air leak tester that can flexibly accommodate various measurement methods (comparison between workpieces, comparison between workpieces and masters, comparison between workpieces and fixed masters (masterless)) and measurement environments. With a rich lineup of nine types that can handle high pressure, it allows for high-precision measurements in a short time through mastering measurement, making it Fukuda's flagship model. The masterless differential pressure air leak tester 'FLA-0200 series' is also available. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional) *Please contact us if you require a test pressure of 1 MPa or higher.

As an alternative inspection method to liquid immersion testing (leak testing) using per- and polyfluoroalkyl substances (PFAS), Fukuda Corporation has been providing airtight testing equipment using pressure change leak testing methods for some time. The 'MSA-0101 series' is the latest airtight testing equipment for sealed products that confirms gross leaks. It is designed for small-scale applications such as testing during device development and random airtight inspections. (For mass production testing or line integration, we offer fully automated testing equipment in the 'MS series.') The product size for inspection ranges from small devices measuring a few millimeters to medium-sized devices up to 80 × 70 mm, which can be accommodated by manufacturing measurement jigs (cores).

The 【MSX-7003 series】 is a leak testing device designed for relatively large electronic devices ranging from medium to large sizes. It is capable of performing leak tests on electronic devices smaller than 10 mm square, such as LEDs, optical devices, high-frequency devices, power semiconductors, IR sensors, gyro sensors, angular velocity sensors, and electrolytic capacitors. The 【MSX-7003 series】 is the top model in the series and is a composite leak testing device that automatically performs three processes: - Helium bombing - Gross leak test - Fine leak test It is also compatible with inline applications (the pass line height is 940 mm). Additionally, we offer a lineup tailored to customer needs, including: - The 【MSZ-7003 series】, designed solely for gross leak testing - The 【MHX-7003 series】, which performs bombing and fine leak testing - The 【MSH-7003 series】, which does not have a bombing device You can watch a video of the actual device in the YouTube link below.

The functionality follows the FL-611, which boasts the highest installation record among our company's leak testers. 【Features】 ■ All stainless steel, non-copper specifications ■ Fluororesin is used for the resin piping ■ Designed for safety using the well-regarded FL-611 housing, known for its operability and visibility ■ The functionality similarly follows the FL-611, demonstrating high performance * For more details, please refer to the PDF document or feel free to contact us.

This is an air leak testing device that quantifies and assesses the sealing performance, waterproofness, and airtightness of sealed products based on pressure changes. ● Features - Dry non-destructive testing that does not wet the product - Quantifies leakage amounts for scientific quality control - Capable of air leaks equivalent to waterproof standards IPX7 and IPX8 - The allowable size for tested products is up to W 300 × D 210 × H 100 mm ● Target Products Automotive parts: In-vehicle cameras, smart keys, ECUs, LED lights Electronic components: Small motors, waterproof connectors, relays, sensors Pharmaceuticals and food: Packaging containers, electronic devices like smartphones, wearable devices and other sealed structural products in general ● Main Specifications Test pressure range: 1 to 200 kPa abs External dimensions: W 470 × D 720 × H 416 mm Weight: 50 kg Number of channels: 100 ch Please contact us for more details.

The "FL-611 Series" is a high-performance leak tester that can flexibly accommodate various measurement conditions and workpieces with its general-purpose design. It is designed to support various measurements, including workpiece vs. workpiece comparison, master vs. workpiece comparison, and masterless measurement. By constructing reference data through linear fitting measurement and comparing it with measurement data, it enables highly accurate detection. 【Features】 ■ High-performance model that can flexibly accommodate various measurement conditions and workpieces ■ Masterless measurement is also possible ■ Detection accuracy improves by constructing reference data and comparing it with measurement data ■ By constructing reference data, it suppresses misjudgments even in unbalanced situations where sufficient measurement time cannot be taken ■ Supports high pressure up to 5MPa, with 10 models available to match the pressure range *For more details, please refer to the PDF document or feel free to contact us.

The "HDA-0100 series" allows for high-sensitivity and wide-range hydrogen measurement, despite being a handheld type. The minimum detectable leak rate is equivalent to 1×10⁻⁶ Pa·m³/s. It can measure from 0.5 ppm to 5000 ppm. It is compact and lightweight, making it convenient to carry. 【Features】 ■ Measurement range is high sensitivity and wide, from 0.5 ppm to 5000 ppm ■ Compact and lightweight, weighing approximately 300 g (excluding battery) ■ Battery-operated and cordless (continuous usage time of about 8 hours) ■ All operations can be performed with one hand, offering excellent operability, and the color LCD screen provides high visibility *For more details, please contact us or refer to the PDF download.

It is used to measure the overall leakage from the entire inspected item (work). - The work is covered with a chamber, tracer gas is filled inside the work, the leaked gas accumulates in the chamber, the leaked gas is stirred and forced to circulate, and the gas concentration is measured using a hydrogen detector [Atmospheric Pressure Chamber Method]. - After creating a vacuum in the chamber, atmospheric air is introduced into the chamber, and gas is directed to the hydrogen detector, allowing for highly sensitive measurements [Vacuum Chamber Method]. There are two methods. The design is compact and lightweight, making it easy to integrate into equipment. Additionally, the concentration resolution capability is ultra-sensitive up to 0.1 ppm (depending on the set conditions and environmental conditions). *For more details, please contact us.

Fukuda Corporation will exhibit at the "2025 YOKOHAMA International Automobile Technology Exhibition"! Please be sure to check out this product at Fukuda's booth! This product is an air leak tester for battery cases of electric vehicles (EVs). The battery case features a structure that is "large with a significant internal volume, and deformation is expected due to internal pressurization." As a result, air leak testing generates noise caused by "the large size and volume" and "expansion or deformation due to internal pressurization." This product is characterized by the use of newly developed smoothing and linear fitting correction functions to reduce this noise during measurement. Additionally, to achieve precise low-pressure control and flow expansion for large volumes, we provide a bypass box (CBU-600) equipped with a pressure regulator that allows for accurate pressure control and a pressure valve with a large effective diameter to supply high flow rates.

The "FLZ-0620 series" is an air leak tester with an automatic calibration function that maintains high precision and reproducibility by auto-calibrating the leakage amount during measurement. By achieving high stabilization of the reference tank (master), it suppresses zero drift of the master (reference). It features a separate structure that allows the workpiece and measurement unit to be placed in the same temperature environment, which helps to minimize flow changes due to temperature. 【Features】 ■ Tester is separated into a display unit and a measurement unit ■ Measurement unit and workpiece can be installed in close proximity, creating the same environment ■ Reduction of piping compared to conventional models is possible ■ Equipped with an auto-calibration function ■ Easy data input and output via USB host and USB function *For more details, please refer to the PDF document or feel free to contact us.

The "FL-610 series" eliminates the need for master management by adopting a linear fitting correction method. By constructing reference data and comparing it with measurement data, detection accuracy is improved, allowing for quick determination of the presence or absence of leaks. Additionally, with a USB port, data input and output is easy, and inspection results can be stored and managed on a USB memory stick. 【Features】 ■ Adoption of linear fitting correction method ■ No need for master management, reducing costs (maintenance, storage space, etc.) ■ Improved detection accuracy by constructing reference data and comparing it with measurement data ■ Quick determination of the presence or absence of leaks ■ Easy data input and output with USB port *For more details, please refer to the PDF document or feel free to contact us.

The "FLZ-0220 series" adopts high-performance correction functions (linear fitting), making it possible to suppress misjudgments caused by measurement environments (depending on environmental conditions). The touch panel has approximately twice the display area compared to conventional models, improving visibility, and the dedicated icons greatly enhance operability. We have prepared replacement jigs for our leak testers. *We also accept replacements from other manufacturers. 【Features】 ■ Touch panel adoption allows for efficient settings and functions ■ All necessary functions for air leak testing are included ■ Comprehensive self-diagnosis and maintenance functions ■ Easy operation with clear dedicated icons *For more details, please refer to the PDF materials or feel free to contact us.

The air pressure unit and measurement sensors can be bundled together, while control and display options are available separately. The "LPU-300 series" is the smallest measurement unit in Fukuda's history, making it ideal for direct attachment to as small a workpiece as possible. It can achieve higher measurement sensitivity compared to conventional all-in-one leak testers (depending on measurement conditions). The "LPU-100 / LPU-024 series" is used as a separate air leak tester in combination with display units (MI-170 / MIZ-0175 / DG-960). The separate display design makes it easier to position the measurement unit close to the workpiece. 【Features】 ■ Compact design that is easy to integrate into measurement devices ■ LPU-300 with control circuit sold separately, and LPU-100/024 where control is left to the customer ■ Rational and low-cost, choosing only the necessary functions ■ Even at a low cost, the differential pressure sensor is equivalent to general-purpose models ■ LPU-300 has a sensor volume of less than 1 mL, excelling in high-sensitivity measurements *For more details, please refer to the PDF document or feel free to contact us.

The "FMZ-1063 series" achieves a measurement accuracy of ±3.5% of R.D. ±1 digit, resulting in approximately a 60% improvement in accuracy compared to conventional products (in the 20-80% range relative to F.S.). The SCAN function, which shortens measurement time and includes correction features, has been inherited, allowing for reduced measurement time while minimizing variability in measurement results. It features a large 5.6-inch LCD screen, enhancing visibility and operability. 【Features】 ■ All-in-one flow tester utilizing a high-precision mass flow meter ■ Calibration port on the front panel improves operability for sensitivity calibration ■ The well-established correction function SCAN has been inherited ■ The display uses a 5.6-inch color LCD, providing over twice the visibility of previous models ■ Various data output options available *For more details, please feel free to contact us.

The "MSZ series" is an air leak testing device that verifies the sealing and waterproofing of sealed products. Three models are available to accommodate the size of the products being tested. It can be used for a variety of products, including packaging equipment and electronic devices. 【Features】 ■ Quantification of leakage amount ■ Quantitative and reproducible measurement results ■ Testing of airtightness and waterproofing of sealed products (e.g., equivalent to waterproof standards IPX7, IPX8) <Examples of items to be tested> ● Automotive parts ● Electronic devices ● Electronic components ● Packaging containers (food, cosmetics) and various packaging containers *Please refer to the "Applications and Achievements" section below. 【Measurement Precautions】 - A space (air) of at least 1 mL is required within the item being tested. - The information provided is an example; please consult us regarding the feasibility of measurement. *For more details, please refer to the PDF document or feel free to contact us.

The "MI-170 series" is a versatile and high-functionality multi-indicator. In addition to upper and lower limit setting devices, it allows for eight types of condition settings according to application, such as scaling and digital filters, which can be easily switched by external signals. It is also effective in production lines with a variety of small quantities, where settings are frequently changed, or when performing multiple types of measurements in one location. 【Features】 ■ Equipped with an additional sensor input besides the built-in sensor, displayed as SUB ■ Holds the peak value within the measured range ■ Peak (maximum value) and bottom (minimum value) can be selected through function settings ■ Capable of eight types of condition settings according to applications, including upper and lower limit setting devices, scaling, and digital filters ■ Two sets of upper and lower limit setting devices (four settings) can be installed, allowing for switching between two settings and four settings *For more details, please refer to the PDF document or feel free to contact us.

A wide range of flow measurements from 2 NmL/min to 500 NL/min is possible. 【 Fukuda's Laminar Flow Meter 】 The laminar element has a structure that bundles capillaries at the cross-section of the flow path. When the flow inside the conduit of the laminar element is laminar, the pressure loss of the laminar is proportional to the flow rate. By measuring this differential pressure, highly accurate flow measurements can be obtained.

The "FU Series" is a compact flow measurement device that integrates laminar flow elements and differential pressure sensors into a manifold base as a single flow unit. Since the differential pressure sensor is pre-integrated, it features a highly convenient design that only requires connection to the laminar flow element for piping. You can easily measure flow by simply connecting the output wiring from the differential pressure sensor to a display unit (sold separately). 【Features】 ■ Cost-effective due to integrated structure ■ Easy flow measurement ■ Easy to integrate into devices with a separate display type ■ Piping system can be utilized with minimal configuration ■ Flow display and flow determination can be achieved by connecting to a display indicator (model: MI-170 / MIZ-0175) *For more details, please refer to the PDF materials or feel free to contact us.

The "FL-612 series" is a product developed to enable effective temperature compensation for powertrains such as engines and transmissions. It features a correction function and correction mechanism that reduce misjudgments during airtightness testing in heat dissipation conditions occurring after cleaning, drying, and assembly processes. 【Features】 ■ Improved productivity (better straightness rate, avoidance of misjudgments) ■ Reduced equipment costs (elimination of cooling processes) ■ High-temperature work compatibility (supports after work cleaning and drying) ■ Improved accuracy (responds to changes in work temperature and ambient temperature) ■ Equipped with USB port *For more details, please refer to the PDF document or feel free to contact us.

The "APU series" is a pneumatic regulator that instantaneously controls pressure and flow based on feedback from an external pressure sensor. Control reproducibility: ±0.1% Response time: 0.5 s *Reference value depending on usage conditions You can choose from a wide variety of options tailored to the required flow rate and pressure, including the "APU-508W," "APU-520W," and "APU-70W." 【Features】 ■ Continuously controls pressure and flow through voltage control ■ Allows monitoring of pressure just before the workpiece using an external pressure sensor ■ External pressure sensor enables ΔP control and constant differential pressure control ■ A wide lineup from small flow rates to large flow rates ■ Can be selected from positive pressure, negative pressure, and compound pressure depending on the application *For more details, please refer to the PDF document or feel free to contact us.

The "DG-960 series" is a pressure gauge equipped with a highly reliable pressure sensor developed in-house (either built-in or external). It comes standard with contact output signals linked to upper and lower limit settings and BCD (parallel) output. The core of the measurement, the pressure sensor, can be equipped with either a diaphragm-type differential pressure sensor or a semiconductor-type differential pressure/gauge pressure sensor developed in-house, allowing for selection based on application needs. 【Features】 ■ Mounting dimensions are designed according to DIN96 standards ■ Accuracy is ±0.15% to ±0.5% of full scale (depending on the sensor used) ■ Sampling speed is 10 times per second ■ Various functions such as upper and lower limit settings, hold function, and auto-zero function are included *For more details, please refer to the PDF document or feel free to contact us.

The "DG-72 series" is a product that incorporates all the essential functions required for digital pressure gauges. It features various functions, including "self-check," which automatically verifies LSI, backup memory, and setting range when powered on, as well as "upper and lower limit settings" and "overrange." The mounting dimensions are designed according to the DIN72 standard. 【Functions】 ■ Self-check ■ Upper and lower limit settings ■ Output logic setting inversion ■ Overrange ■ Auto zero *For more details, please refer to the PDF materials or feel free to contact us.

By providing a helium inspection device designed as a dedicated machine as a highly flexible standard system, we keep costs down. You can choose from two measurement methods: vacuum chamber method and atmospheric pressure chamber method. Standardization of the main unit makes it easier to select specifications compared to fully customized products. We propose a gas recovery unit that suppresses and controls helium gas consumption. It is also possible to combine a blender that allows inspection with diluted helium gas and a pressurization unit for high-pressure measurements. By combining air leak testing with the helium leak test system, we can significantly improve the accuracy of the large leak confirmation process, which puts a burden on the helium detector and is one of the causes of line stoppages. 【Features】 ■ Supports various workpieces and specifications ■ High precision and fast measurement due to chamber design for workpiece shapes ■ Compatible with diluted helium gas ■ Helium gas recovery pressurization unit available (optional) *For more details, please refer to the PDF document or feel free to contact us.

The "MSX-7000 series" is a leak testing device for sealed package products such as small electronic components, crystal oscillators, MEMS and optical devices, and various sensors. With a new mechanism, it has achieved inspection of sizes as small as 1.0 × 0.8 mm for the first time, and the transport accuracy has improved through position correction using image processing. It can perform both bomb testing and gross/fine leak testing in a single unit. 【Features】 ■ Achieved inspection of sizes as small as 1.0 × 0.8 mm for the first time with a new mechanism ■ Improved transport accuracy through position correction using image processing ■ Enhanced gross leak sensitivity to 8.5×10⁻⁸Pa·m³/s *For more details, please refer to the PDF document or feel free to contact us.

The leak test for packaging engineering is fully automated, eliminating defective packaging based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the leak test process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process to achieve quantitative quality assurance - Can be connected to existing production lines in a slim, space-saving design - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Complete domestic production ensures peace of mind for maintenance and troubleshooting - Target work: pillow packaging

Compliance with Container Closure Integrity Testing (CCIT) for pharmaceutical packaging Fully automated leak testing for various vials, bottles, eye drop containers, and cylindrical containers - GMP validation compliant - Data integrity compliant - CSV Category 3 compliant - Inspection accuracy confirmed by positive controls (Φ10 μm and Φ20 μm) * Conveyor is not included with this product. Specifications are subject to change without notice.

The "MS series" is a leak test system for small electronic components that require airtightness, including: - Crystal devices - Ceramic oscillators - Optical devices - Power semiconductors - CAN devices - Laser diodes - Capacitors Leak testing of sealed products may involve both gross leak and fine leak inspections, depending on product specifications and characteristics. We offer a lineup that includes fully automatic machines capable of performing the entire process in one unit, custom-built dedicated machines, and convenient tabletop types for sampling inspections. 【Lineup (excerpt)】 <Fully Automatic Devices> ■ Gross Leak Test System - MSZ-6200 - MS-6086 ■ Bombing Gross and Fine Leak Test System - MSX-6110 - MSX-6200 - MSX-7000 *For more details, please refer to the PDF document or feel free to contact us.

The "MSX-0101 series" is a compact leak testing device specifically designed for electronic components such as MEMS, crystal devices, and SMDs. It is fully equipped with helium filling, gross leak testing, and fine leak testing in a single system. By managing the filling time and waiting time, it allows for proper gross and fine leak testing. 【Features】 ■ Ideal for leak testing of electronic components such as MEMS and SMDs ■ Quantifies gross and fine leak amounts while managing filling time and waiting time ■ Capable of performing both gross leak testing and fine leak testing with one device ■ Enables highly accurate fine leak measurement by appropriately setting bonding conditions and gross leak conditions *For more details, please refer to the PDF document or feel free to contact us.

The "MUH-0100 series" is a leak testing device specifically designed for ultra-micro leak measurement that employs the "capsule accumulation method." Our company has developed a high-sensitivity helium leak detection technology called the "capsule accumulation method" for measuring ultra-micro leaks. MEMS components such as angular velocity sensors and infrared image sensors, as well as small electronic components, need to maintain their sealing properties over long periods, requiring high airtightness. 【Capsule Accumulation Method Features】 ■ Capable of measuring up to 4×10⁻¹⁵ Pa·m³/s (He) ■ Significantly reduces background noise ■ Capable of detecting ultra-micro helium leaks ■ Reduces the influence of gases other than helium, which can be sources of error ■ Eliminates the need for heaters or ultra-low temperature pumps, with startup maintenance times comparable to standard helium leak detectors ■ Commercially available standard leaks can be used for calibrating helium accumulation amounts *For more details, please refer to the PDF document or feel free to contact us.

This is a leak testing device to confirm the airtightness of packaging containers. - Achieves improved reliability of formulations - Detects peeling, tearing, and the presence of pinholes in packaging containers, and displays differential pressure, leakage amount, graphs, etc. - Easy operation with a touch panel - Inspection targets: pillow packaging, PTP, three-side or four-side seals (packaged products), plastic bags (e.g., infusion bags), strip packaging (SP packaging), gusset packaging, stick packaging, jar containers, etc. - Usage locations: manufacturing offline, CMC laboratories, quality control testing laboratories, stability testing, etc.

It is easy to replace products with other products. Replacing the product is a simple task of unplugging the connector from the current tester and plugging it into this product. It can be easily installed without the need for rewiring.

The pilot regulator "P-200" has high micro-pressure control capability and is a pressure reducing valve suitable for micro-pressure control. The controllable output pressure ranges from 0.1 kPa to the positive pressure side, and in the case of negative pressure specifications, it ranges from -0.1 kPa. The positive pressure specification has a function to maintain the set pressure constant by adjusting the flow rate that relieves from the output side to the atmospheric pressure side, while the negative pressure specification adjusts the flow rate that relieves from the atmospheric pressure side to the output side. 【Features】 - It uses a large diameter nozzle flapper method, providing excellent stability. - It has excellent pressure reproducibility. - It has a wide range of set pressure from micro-pressure to low pressure, making pressure adjustment easy. - Differential pressure (ΔP) control is also easy. - It has a relief structure, and the positive pressure specification can be used as a high-sensitivity relief valve.

The "FFM series" is an essential piece of equipment to ensure the reliability of air leak tests. It has minimal material degradation over time, allowing for safe and stable sensor sensitivity verification and leak tester inspections for extended periods. Sensor sensitivity verification and inspection can be utilized as a "standard leak." 【Features】 ■ Active in routine inspections and more ■ Can be directly connected to the calibration port of air leak testers ■ Built-in flow standard enhances the convenience of air leak testers ■ Allows for verification of measurement errors by comparing the values indicated by the tester with those of the flow standard ■ Easily creates conditions for detecting leaks or confirming their absence ■ JCSS Registration | JCSS Calibration Certification (please contact us for details) https://www.nite.go.jp/iajapan/jcss/labsearch/index.html ↑↑↑ By searching for "Fukuda" on this URL site, it will be displayed * For more details, please refer to the PDF materials or feel free to contact us.

This is a pseudo-defect (reference test piece) that specifies hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). - Evaluation of packaging integrity in accordance with JP18 - Setting of "maximum allowable leakage limit" - Testing for the intrusion of water vapor, oxygen, and microorganisms - Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

At Fukuda Co., Ltd., we not only sell standalone testers but also manufacture leak testing equipment tailored to our customers' requests and specifications. We believe that by not only providing leak testing machines but also maintaining and improving seal jigs and components around the testers, we can achieve high cost-effectiveness and equipment stability, and we are promoting the provision of equipment. Our lineup of leak testers includes flow meters, air, hydrogen, and helium-based testers, allowing us to meet a wide range of customer needs from parts to assembled products, low pressure to high pressure, and small flow rates to large flow rates. Please feel free to contact us. ● Automotive-related Intake manifolds, common rail systems, lithium-ion batteries, cylinder heads (oil and water passages), cylinder blocks, in-vehicle harness assemblies, fuel tanks, delivery pipes, injectors, brake calipers, headlights, battery cases, heat exchangers, etc. ● Electrical and electronic-related Harnesses, electronic components (fully automatic), electronic components (desktop type), MEMS, quartz oscillators, ceramic resonators, relays, switches, connectors, cable assemblies, waterproof cameras, clocks, etc. (Continued below)