エスペック Product Lineup

The international standard ISO 16750, widely used as a standard for global procurement of automotive equipment and components, and the LV124 standard created by German automobile manufacturers. Our testing laboratory complies with the evaluation tests based on these standards.

• Other contract services

This product is a "Constant Temperature and Humidity Chamber for Universal Testing Machines" that can be set up with universal testing machines (tensile, bending, compression) and fatigue testing machines, capable of reproducing a constant temperature and humidity environment with high control performance. It is suitable for testing polymer materials such as plastics, rubber, and films, as well as adhesives. We have achieved improved testing efficiency, energy saving, and ease of operation with our unique mechanism. Humidity types are also available as standard. Testing under harsh conditions, such as 85°C/85% rh, is possible. 【Features】 ■ Reduced recovery time with shutter mechanism ■ Frost and condensation suppression with dry air ■ Humidity types also available in the lineup *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other environmental analysis equipment

The bench-top size constant temperature and humidity chamber, a compact environmental testing device, offers genuine environmental testing performance despite its small size. It features a combination of temperature (humidity) ranges and capacities (22.5L and 64L), with a type that has a temperature change rate of 5.0℃/min, resulting in a total lineup of 12 models. The controller is equipped with a color touch panel, enhancing operability and visibility.

• Printed Circuit Board
• Sensors
• Dedicated IC

Rapid Temperature Change Type ■ Additional models compliant with IEC 60068-2-14Nb, 2-30, 2-38 released ■ Rapid temperature change performance of 18°C/min Tests requiring temperature change rates of 10°C/min, 15°C/min, and 18°C/min can be conducted between -45°C and +155°C. ■ Frost-free operation across the entire range (temperature and humidity control) With a wide temperature and humidity control range of 10-98% RH, frost does not occur across the entire range. Continuous operation can be performed with peace of mind, as defrosting is unnecessary. ■ Recipient of the Good Design Award 2019 Standard Type ■ Wide temperature and humidity control range Achieves a temperature and humidity control range of -45°C/-75°C on the low side and +180°C on the high side, with humidity control from 10-98% RH. Stable temperature and humidity control can be maintained even in high temperature and high humidity conditions of 95°C/98% RH. It can also be used for accelerated testing. ■ Sample temperature control function for more reliable testing A sensor for measuring sample temperature (1 point) is attached to the sample to monitor and control its temperature.

• Capacitor
• Engine parts
• Other Auto Parts

A two-zone thermal shock device that perfectly fits domestic and international standard tests such as MIL, IEC, and JASO. 【Features】 Achieves high performance required for standard tests! ● The two zones (+150℃ and -65℃) shorten the temperature recovery time of samples. * With a set temperature of +150℃ and -65℃, for a 10kg plastic molded IC sample, the temperature recovery time was achieved within 15 minutes. ● Compatible with standard tests including MIL-STD-883. * Supports testing standards such as MIL-STD-883 and JIS C 60068-2-14-Na. ● Stable temperature distribution performance. * Airflow within the test area is evenly distributed, achieving excellent temperature distribution performance. This provides uniform thermal stress to the samples, minimizing variations in test results between samples. ● The liftable two-zone test area reduces testing time. ● Equipped with a sample temperature trigger for measuring sample temperature.

• Testing Equipment and Devices
• Other environmental equipment

This is a rapid temperature change chamber that is perfectly suited for responding to rapid temperature changes in samples, from JEDEC standards to screening. 【Features】 ● Highly reproducible lamp control In TCC sample temperature ramp operations, the lamp plate is controlled during temperature rise and fall, allowing for symmetrical strain waveforms. Even if the amount of the sample changes, tests can be conducted with the same lamp plate each time, maintaining a constant strain rate. This enables highly reproducible testing. ● Complies with JESD22-A104F standard testing ● Supports sample temperature control and air temperature control

• Testing Equipment and Devices
• Other environmental equipment

■Achieves significant space-saving By adopting a slim design with a vertical layout of various components, including the control panel and heater, on the upper part of the main unit, the installation area has been reduced by 20.6% (compared to our company’s standards of capacity/installation area). This enhances productivity on the manufacturing line and effectively utilizes research and development space. ■Door interior is made with integrated pressing The molding of the door interior is done with integrated pressing, eliminating heat loss from metal seams. ■Capable of processing large quantities at once By strengthening the load capacity of the floor and shelves, it has become possible to perform large-scale heat treatment at once. Additionally, the shelves are sliding type, making it easy to load and unload samples. ■Constant temperature atmosphere inside the unit even with damper fully open Equipped with a damper for ventilation operations. Due to significant improvements in heating performance, there are no temperature fluctuations inside the unit caused by the damper opening, maintaining a constant temperature at all times. (When the ambient temperature is +20°C)

• Vehicle body parts
• Electrical equipment parts
• LED Module

- Complies with standard tests such as IEC60068-2-14Na and MIL-883L. - Two-zone and three-zone methods through damper switching. - There is no vibration stress on the sample due to movement, ensuring more accurate test results. - 1000 cycles of continuous operation. Defrost-free function (optional). - Continuous cycle testing for 500 hours is possible without interruption due to defrosting during the test. Continuous operation for 500 hours can be achieved without interruptions for defrosting. Under the 15-minute exposure test conditions, continuous testing for 1000 cycles can be performed without interruption, reducing defrost time and defrost power during the cycle test. - Achieves both power consumption reduction and shortening of test time simultaneously.

• Testing Equipment and Devices
• Other environmental equipment

The high-acceleration life test device is equipped with functions centered around bias tests that apply a constant voltage or signal. A two-tier type that secures double the capacity in a single installation space is also available. It can accommodate simultaneous testing under different conditions and an increase in processing volume.

• Capacitor
• Other electronic parts
• Dedicated IC