北川グレステック List of Products and Services

The "MINITECH Series" is a sample polishing machine that can accommodate grinding wheels ranging from 200φ to 300φ mm. Equipped with motor power from 750w to 1500w, it features a sturdy body design that allows for easy maintenance and prevents deterioration. By quantifying parameters and the load on the motor via a touch panel, it specializes in reproducibility. 【Features】 ■ Ultra-precise speed variation ■ Constant torque and speed unaffected by load ■ Gradual acceleration and immediate stop capability ■ Ability to change rotation direction to clockwise and counterclockwise ■ Safety mechanism activation even in cases of heat generated by prolonged overload *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "MECATOME T202" is a compact sample cutting machine capable of cutting a wide range of materials, from soft to hard. The brushless motor can rotate at a wide range of 100 to 4000 RPM with a constant torque. The sample arm can be adjusted by rotating a dial to change its lateral position, allowing for cutting samples from various angles. 【Features】 ■ Capable of cutting a wide range of materials ■ Two cutting methods (manual and cutting by the weight of the sample and weights) ■ Operates with diamond cut wheels and resinoid wheels ■ Ergonomic and intuitive user interface *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

"Technotray POWER" is a blue light chamber suitable for the irradiation curing of Kulzer's light-curing resin "Technovit 2000 LC series." The interior is lined with high-reflectivity aluminum plates, allowing for uniform and consistent light output. Additionally, the dedicated blue light can uniformly cure up to approximately 30mm thick when using Technovit light-curing resin. [Features] ■ Compatible with the "Technovit 2000 LC series" ■ Interior lined with high-reflectivity aluminum plates ■ Capable of uniform and consistent light output ■ Maximum temperature (when using φ40mm mold) ・For 2mm thick resin: approximately 70–90°C (irradiation for about 5 minutes) ・Full amount of mold (without sample): approximately 120°C *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

This document presents the specifications of the Kulzer Technovit series (room temperature curing resin) in an easy-to-understand comparison table, covering applications, product composition, curing times, and more. Kulzer's Technovit is a high-quality resin product that combines high reliability with ease of use. Its range of applications is limitless, and it can be utilized in various fields. It is particularly well-regarded as an embedding resin for cross-sectional observation in quality assurance and product development. [Featured Products (Partial)] ■Technovit4000 ■Technovit4004 ■Technovit4006 ■Technovit4071 ■Technovit5000 *For more details, please refer to the PDF document or feel free to contact us.

• Organic Natural Materials

"Technovit 8100" is a resin based on HEMA suitable for observation of samples using optical microscopy. If the specimens are demineralized iliac crests or implanted biomaterials, they can be used not only for histological purposes but also for enzymology and immunology applications. It is suitable for specimen observation in histology, zoology, botany, enzymology, and immunology. 【Features】 ■ Based on HEMA suitable for observation using optical microscopy ■ Particularly suitable for specimen observation in histology, zoology, botany, enzymology, and immunology ■ Composed of nearly odorless plasticizers and hydrophilic resins ■ Especially suitable for cold curing (4 °C) ■ Service life is approximately 2 years *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

The "Technovit 2200 Series" is a light-curing resin for surface transfer from Kulzer. When direct observation of the surface is not possible, transfer becomes one method to observe the surface condition. Kulzer's resin accurately transfers the surface of the sample, enabling high-precision observation. 【Features of the Technovit 2200 Series】 ■ Curing is completed in approximately 20 to 60 seconds ■ Almost no influence from temperature ■ Available in three types: 2200, 2210, and 2220, tailored for detailed applications ■ Can be cured with the dedicated lights Pekalux POWER LED and Technovit Blue LED ■ Excellent hardness after curing ■ Superior for processing such as polishing and grinding *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

The "Technotherm Catalog" features thermosetting resins for metal structure specimens from Kurzer. We clearly introduce products such as "Technotherm2000," which minimizes the gap with samples, as well as "Technotherm3000" and "Technotherm4000," along with their characteristics and recommended curing conditions. [Featured Products] ■Technotherm2000 ■Technotherm3000 ■Technotherm4000 *For more details, please refer to the PDF document or feel free to contact us.

• Other laboratory equipment and containers

The "Histology Accessories Catalog" features products that are used in combination with resin materials for histology. Kulzer's resin materials for histology, Technovit 7100 and Technovit 8100, have been used in laboratories and research institutions for several decades, and their quality has been proven over time. We introduce accessories suitable for Technovit 7100 and Technovit 8100, such as the dedicated Teflon molds "Histofrom" and "Histoblock," along with images, features, and usage instructions. [Featured Products] ■ Histofrom (Teflon mold) ■ Histoblock ■ Technovit 3040 ■ Technovit Histoblade (histology knife for microtome) / holder, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic utensils and containers

CMP (Chemical Mechanical Polishing) slurry is used in the semiconductor manufacturing process to polish the surface of substrates. Chemical etching softens the material, and mechanical abrasion removes the material, resulting in the flattening of the original three-dimensional shape. This is the mechanism of CMP. Our CMP slurry has a proven track record for various applications, including copper wiring for semiconductor circuit miniaturization and speed enhancement, low-temperature sputtering for cost-effective aluminum wiring, and compounds that excel in high-speed signal processing. It is composed of a chemical reaction solution and nano-sized polishing particles, characterized by minimal generation of coarse particles and sedimentation, ensuring stable quality. *Please feel free to contact us.*

• Wafer processing/polishing equipment

The "Technomat" is a compact pressure vessel capable of being pressurized up to 2.0 atmospheres. It is specially designed for fast-curing resins. By using this product, it is possible to create high-quality test samples without bubbles. Particularly when used with transparent Technovit products, it enables bubble-free resin embedding with clarity. Additionally, we offer a wide range of products for resin embedding of observation samples, such as "molds for resin embedding" and "embedding aids for sample fixation." 【Features (Technomat)】 ■ Capable of being pressurized up to 2.0 atmospheres ■ Compact ■ Specially designed for fast-curing resins ■ Capable of creating high-quality test samples without bubbles *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 7100" is a resin composed of three components based on HEMA (2-hydroxyethyl methacrylate). It is suitable for use with a microtome during optical microscope examinations of material samples. For porous products, fibers, and paper, preliminary infiltration is recommended, while no additional infiltration treatment is necessary for plastics and metal foils. [Features] - Composed of three components based on HEMA - Samples embedded in resin can be sliced at the micron level - Practical for industrial applications - No additional infiltration treatment required for plastics and metal foils *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 5071" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. After curing, it can be dissolved with acetone, dichloromethane, and other solvents. It has high adhesion and excellent machinability and polishing properties. 【Features】 - Fast-curing resin based on acrylic - Cures with two components: powder and liquid - Can be dissolved with acetone, dichloromethane, and other solvents - High adhesion - Excellent machinability and polishing properties *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 5000" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It contains copper powder, providing the conductivity necessary for SEM observation, and can also be used for the electrolytic polishing of metal samples. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with two components: powder and liquid ■ Contains copper powder ■ Has the conductivity required for SEM observation ■ Mixing ratio 2:1 (powder:liquid) *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 4071" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It has excellent fluidity and is a resin with good workability that fits complex shapes and has a short curing time. It possesses excellent machinability and polishing properties, making it suitable for soft samples such as aluminum. 【Features】 - Fast-curing resin based on acrylic - Cures with two components: powder and liquid - Excellent fluidity - Fits complex shapes - Excellent machinability and polishing properties *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 4006" is a highly transparent, low thermal stress acrylic-based cold-curing resin. It cures with a two-component system of powder and liquid. It is suitable for samples that require a transparent embedding resin and for confirming samples embedded during sample preparation. Due to its high adhesion to samples, it is also suitable for samples with thin films or small samples. 【Features】 ■ Acrylic-based cold-curing resin ■ High transparency ■ Cures with a two-component system of powder and liquid ■ High adhesion to samples ■ Mixing ratio 2:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 4004" is a fast-curing resin based on acrylic. It cures with two components: powder and liquid. It is suitable for all samples that require a transparent embedding resin, especially when it is necessary to confirm the samples embedded during sample preparation. It is actively used not only in the metal manufacturing industry but also in the electronics industry. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with two components: powder and liquid ■ Mixing ratio 2:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 4000" is a fast-curing, low-temperature polymerization resin based on polyester. It cures with three components: powder, syrup I, and syrup II. Its low shrinkage during polymerization and perfect edge fit, along with excellent flow properties, allow for the embedding of complex-shaped samples. Its excellent adhesion to metals enables gap-free resin embedding for all metal samples. It is also suitable for samples with porous surfaces, small cracks, or cavities in unseen areas. 【Features】 ■ Cures with three components: powder, syrup I, and syrup II ■ Low shrinkage during polymerization and perfect edge fit ■ Excellent adhesion ■ Capable of embedding complex-shaped samples ■ Mixing ratio 2:2:1 (powder:syrup I:syrup II) *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 3040" is a fast-curing resin based on acrylic. It comes in yellow and black colors and cures with a two-component system of powder and liquid. It is suitable for casting shapes, positioning samples for transfer, hard-to-reach areas, vertical surfaces, and back sides. 【Features】 ■ Fast-curing resin based on acrylic ■ Cures with a two-component system of powder and liquid ■ Colors: Yellow, Black ■ Suitable for hard-to-reach areas, vertical surfaces, and back sides ■ Mixing ratio 1:1 - 3:1 (powder: liquid) *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Technovit 2000 LC" is a transparent resin that can be cured at low temperatures simply by exposing it to blue light. It is filled into PE molds and cured within a Technotray light exposure device. By curing it in thin layers multiple times, it is possible to keep the reaction temperature below 50°C. After curing, when the temperature of the resin drops to around room temperature, it achieves an appropriate hardness for cutting and polishing. 【Features】 ■ Cures at low temperatures simply by exposing to blue light ■ Curing time: 20 minutes; curing temperature: below 90°C ■ No need to mix the resin ■ No bubbles and high transparency ■ Odorless *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Provil Paste" is a silicone resin composed of a base material and a hardener. It is used by kneading it by hand in a 1:1 ratio. The kneaded resin can be transferred simply by pressing it against the sample with your hands. The resin hardens to a sufficient hardness for release after about 4.5 to 5 minutes. Due to the difference in hardness after curing, there are two types: regular and soft. The main application is for transfer intended for measurement in the mold and working equipment industry. 【Features】 ■ High-precision transfer performance (< 0.1 μm) ■ Suitable for surface transfer on etched surfaces (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Moderately deformable, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

"Provil novo Light" is a low-viscosity silicone resin suitable for molding complex shapes. It consists of a dispensing gun, cartridge, and mixing tube, and the resin is uniformly mixed simply by pulling the lever of the gun. This allows for safe and error-free work. The mixed resin can be directly applied to the sample. For applications in small cavities or holes, attachments for fine work are available. 【Features】 ■ High precision transfer performance (< 0.1 μm) ■ Suitable for surface transfer on etched surfaces (max. 500:1) ■ Accurately reproduces treated surfaces in three dimensions ■ Moderately deformable, allowing for accurate reproduction of complex-shaped samples ■ No work errors due to the automatic mixing system *For more details, please refer to the PDF document or feel free to contact us.

• Resin processing machine

At Kemet Japan's Technical Center (Chiba Tohkyo Factory), we offer contract lap processing, lap polishing development, and test lap processing services. We can handle work sizes from a few mm to 300 mm, with flatness requirements of <1μm and surface roughness requirements of <1nm, using our in-house lap and polish machines to meet your needs. *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

Alumina polishing agents are available in both powder and liquid suspension types, considering the needs of users. Colloidal silica is offered in two types: the regular type and the amorphous type. 【Features】 ◆ Alumina Polishing Agents They enable ultra-fine polishing of a wide range of materials, from metal materials to electronic components. Particle sizes can be selected according to the material, ranging from 1μ to 0.8μ, 0.3μ, and 0.04μ. ◆ Colloidal Silica Colloidal silica has effects similar to chemical polishing. It removes fine scratches and distortions left on samples after diamond polishing. The amorphous type can also be supplied for automatic machines. *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

<Product PR> Diamond abrasives are used in the pre-process of the buffing stage, which employs alumina or silica known as ultra-finishing. They are widely used for materials that tend to smear with sandpaper and for achieving mirror finishes on both metals and non-metals. 【Features】 ◆ Less smearing Processes that use diamonds in the buffing stage are known to be less prone to smearing. ◆ Metal materials They allow for a simpler way to achieve mirror finishes. ◆ Non-metal materials For composite materials, they can reduce erosion and smearing compared to sandpaper. *For more details, please refer to the PDF document or feel free to contact us.*

• Other abrasives

We can provide guidance tailored to the size of the grinding wheel of your grinding machine. We offer a wide range of abrasive grains, from coarse to fine. We also carry grinding paper that can be used in conjunction with PRESI's unique Reflex FIX. It is user-friendly and helps improve work efficiency! 【Features】 ■ You can select grinding paper with an outer diameter that matches the size of the grinding wheel. ■ You can choose the abrasive grain according to the material being ground. *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

This is a cloth designed to polish samples to a state suitable for analysis. We offer a variety of polishing cloths that cater to different samples. Our lineup ranges from coarse polishing with diamond abrasives to ultra-fine polishing with alumina and silica abrasives. 【Features】 ◆ We provide cloths tailored to the user's environment. We offer two types: one with a regular adhesive back and another compatible with magnetic discs that have a metal plate on the back. You can use a polishing cloth that suits your environment along with the size of the polishing disc. ◆ We have a dedicated storage tower for easy storage. After use, you can store nine polishing cloths separately by abrasive particle size without taking up much space. *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

Diamond discs, due to their fixed abrasive particles, reduce variability among users while providing a smooth surface. They are particularly compatible with metal materials. 【Features】 ◆ Flat and smooth surface The fixed abrasive particles minimize tilt, allowing for a smooth surface. ◆ Prevention of sagging By removing the same amount from both the resin and material parts, sagging can be prevented. ◆ Cost reduction With a lifespan equivalent to 500 sheets of waterproof sandpaper, you can achieve cost savings compared to using 500 sheets of sandpaper. *For more details, please refer to the PDF document or feel free to contact us.*

• Other abrasives

Kemet Japan's "Poly' Vac" is a vacuum degassing device designed to enhance the permeability of room temperature curing resins and optimize the embedding of samples. It allows for pressure programming, enabling users to step away from the device during degassing to perform other tasks. The pump and container are designed as a single unit, and the pump is exceptionally quiet, creating a comfortable working environment while saving space. 【Features】 ■ Optimizes sample embedding ■ Allows for pressure programming ■ Compact design with integrated pump and container ■ Quiet pump ■ Highly operable color touch screen This model can be used for sample preparation. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine tools

Kemet Japan's "PRESSURE VESSEL" is a container designed to enhance the degassing effect of room temperature curing resins under pressure and reduce shrinkage. It can be used simply by flowing compressed air from a compressor into the inlet. It particularly improves the embedding accuracy of the KM series acrylic resins, which cure in a short time to the extent that bubbles cannot be removed with a vacuum degassing machine. 【Features】 ■ Easily degas room temperature curing resins ■ Just flow compressed air from a compressor into the inlet ■ Effective for embedding acrylic resin KM series *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

Kemet Japan's "MECAPRESS 3" is a hot resin embedding device that fully automates the embedding process. With an easy-to-use interface, you can accurately set the embedding parameters, which can also be saved and edited. Not only is the embedding cycle extremely fast, but it also features a function to minimize the amount of water used for cooling. 【Features】 ■ Hot resin embedding device ■ Automation of the embedding process ■ Easy parameter setting for embedding ■ Color touch screen ■ New heating and cooling system enables high-speed embedding Samples can be created using this model. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

At Kemet Japan, we can provide guidance on cutting wheels tailored to the material and hardness of the workpiece you wish to cut. We offer a diverse lineup of cutting wheels for various materials. 【Features】 ■ Ability to select cutting wheels with the appropriate outer diameter for your cutting machine ■ Ability to choose cutting wheels suitable for the material being cut ■ A selection of resin-bonded wheels and diamond wheels *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "EVO500" from Kemet Japan is a cutting machine specialized for cutting extra-large samples. It is equipped with a high-power motor and sensors to optimally manage the feed of the table for perfectly cutting large samples. Additionally, the cover automatically opens and closes with the motor, and the design allows for safe and comfortable use, making it easy to reach every corner of the table. 【Features】 ■ For cutting extra-large samples ■ High-power motor and sensors ■ Automatic opening and closing cover ■ Easy access to every corner of the table ■ Optimal cutting for gigantic samples *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "MECATOME ST330" from Kemet Japan is an ideal cutting machine that accommodates precise and a wide range of sizes and shapes of sample pieces. The motor and transmission for rotating the cutting wheel are optimally adjusted. It features four cutting modes, enabling high-precision cutting. 【Features】 ■ Equipped with four cutting modes ■ Powered by a powerful new motor ■ Table movement can be controlled directly with a joystick ■ Easy maintenance and cleaning ■ Automatic continuous slicing is possible with options This model can be used to create samples. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "MECATOME ST310" from Kemet Japan is a cutting machine with a swing mechanism designed for quick cutting. By selecting a cutting wheel of either φ250mm or φ30mm and combining it with four rotational speeds, you can achieve optimal cutting for various materials. Additionally, the side of the cover features an opening, allowing for the cutting of large and long workpieces. 【Features】 ■ Reduces cutting time with the swing mechanism ■ Prevents burning of workpieces and cutting wheels ■ Four selectable rotational speeds ■ Designed to cut large and long workpieces *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

"The Cube" can be polished with a space of 400x400! This single unit can handle everything from rough grinding with waterproof grinding paper to ultra-fine buff polishing. It supports plates of φ200mm and φ250mm. Equipped with a high-torque motor controlled by an inverter, it can rotate in both clockwise and counterclockwise directions. The rotation speed of the polishing plate can be switched between 150rpm and 300rpm, and the multi-jet water spray quickly supplies coolant. 【Features】 ■ Supports plates of φ200mm and φ250mm ■ Simple yet rigid design ■ Inverter control allows for clockwise and counterclockwise rotation ■ Equipped with a high-torque motor ■ Polishing plate rotation speed can be switched between 150rpm and 300rpm *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "MECATOME T260" from Kemet Japan is a highly reliable and powerful cutting machine that can be utilized in laboratories and sample preparation sites. It is a simple and easy-to-use model for cutting sample work, with a two-speed switch suitable for various materials. Designed to improve cutting precision and reduce effort for the user, it provides the best balance, including motor and grinding wheel attachment. 【Features】 ■ For use in laboratories and sample preparation sites ■ Simple and easy cutting ■ Two-speed switching suitable for various materials ■ Ability to choose from a variety of fixtures to match sample work *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "Mecatech 234-264" is an automatic polishing machine that allows all operations via a touch panel. The detachable drain bowl design makes maintenance easy and reduces the likelihood of clogging. 【Features】 ■ Equipped with an LED color touch screen ■ Capable of saving 100 different polishing processes ■ Three types of loading methods to choose from ■ Can switch between automatic and manual operation *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

Kemet Japan's "MECATOME T210" is a high-quality cutting machine designed for small to medium-sized cutting tasks. It features three cutting systems: manual, automatic, and programmed, enabling precise and reproducible cutting regardless of the material. Designed with high-quality components such as spindles, bearings, guidance systems, and motors, it ensures stability. 【Features】 ■ Small to medium-sized cutting machine ■ Precise cutting regardless of material ■ Stability achieved with high-quality parts ■ Flexible cutting with three cutting modes Samples can be created using this model. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

Kemet Japan's "FLEXICUT" is an ideal flexible machine for cross-sectional analysis of printed circuit boards. It is a cutting machine with overwhelming flexibility that can utilize three different cutting methods, accommodating a variety of workpieces. It offers three modes suitable for cutting large boards, cutting substrates, and cutting small-diameter samples, all in one machine. 【Features】 ■ For cross-sectional analysis of printed circuit boards ■ Overwhelming flexibility ■ Ability to switch between three cutting methods Samples can be created using this model. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "Monochromatic Light" is a light used in conjunction with the "Optical Flat." It uses long-lasting sodium lamps to make interference fringes more visible. 【Features】 ■ A flatness measuring device that utilizes interference fringes ■ A light that makes interference fringes more visible *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

Kemet Japan's "Optical Flat" is a flatness measuring device that utilizes interference fringes. It measures flatness and parallelism through light interference. By using "Monochromatic Light" in conjunction, the interference fringes become easier to see. 【Features】 ■ A wide range of sizes available ■ Choice of accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

The "Diamond Slurry Dispensing System" is a device that combines an electronic dispenser and an auto stirrer. The auto stirrer is equipped with a built-in magnet and motor, allowing for the insertion of a magnetic spin bar into the slurry bottle to facilitate the stirring of the liquid. The dispenser is a device that automatically supplies diamond slurry to a wrapping plate using air. 【Features】 ■ Stirs the liquid diamond slurry ■ Set of electronic dispenser and auto stirrer ■ Dispenser automatically supplies the slurry ■ The slurry ejection force is managed by adjusting the air regulator ■ Simultaneously controls two systems: slurry and lubricant *For more details, please refer to the PDF document or feel free to contact us.

• Other abrasives

"CHALLENGE 800-HT Series" is an additive developed for alkaline or pure water ultrasonic and megasonic cleaning. Ultrasonic and megasonic energy is efficiently released on the surface of the cleaning wafer, resulting in excellent cleaning results. [Features] - Excellent wetting effect - No rinsing required - no film or residue left - Economical and safe - Can be used in conjunction with all Challenge series *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

The "CHALLENGE 550-HT" is an additive for high-speed circulation (recycling) slurries. It uniformly disperses various abrasives such as alumina, cerium, zirconia, SiC, B4C, synthetic/natural diamonds, and garnet. This effect allows for continuous use as a circulating slurry, reducing slurry waste and the amount of abrasives used. 【Features】 ■ For lapping and polishing ■ Reduces material damage (processing alteration layer) ■ High lapping rate ■ No scratches ■ Effective cleaning after polishing *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

"CHALLENGE 543-HT" is a lubricant for wrapping/polishing designed to enhance the dispersion of various abrasive particles such as alumina, cerium, zirconia, SiC, B4C, synthetic/natural diamonds, and garnet. Due to its dispersion effect and viscosity, the amount of abrasive particles used can be reduced by 50%. It is more effective when used with a small amount of slurry supplied through a small-diameter tube. 【Features】 ■ Flatness after lap and polish ■ Reduced wafer damage ■ High lap rate ■ No scratches *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables