ハギテック List of Products and Services

It is a metal lock nut used for attaching cable glands and other types of screw connectors to enclosures and similar applications.

This is a resin lock nut used for attaching cable glands and other types of screw connectors to enclosures and similar applications.

We use it with lock nuts for waterproofing in cable connectors and similar applications.

It is a metal connector used to prevent dust, dirt, and water from entering screw holes that are not primarily used, and to improve the appearance.

This is a resin connector used to prevent dust, dirt, and water from entering screw holes that are not primarily used, and to improve the appearance.

● This is a seal connector for knockout that can ground a single cable. (There is also a multi-type that can ground multiple cables. Please contact us for more information.) ● IP65 ● Operating temperature range: -20 to 90℃

This is manufactured based on JIS standard F8801. There are also products that meet the Ministry of Defense standards. We also produce special materials.

Small cable connector for fine cables. The dimensions of the connector body have been minimized to achieve space-saving design. It can clamp cables with diameters ranging from 1.5 to 4.0 mm, and can be used as a fully waterproof type. The sealing rubber is made of nitrile rubber, which is excellent in oil resistance, heat resistance, and weather resistance.

● The cable diameter for use can range from 1.0 to 67Φ. Additionally, the cable clamping range for each size is wide, from 5 to 6Φ. ● It is manufactured based on BS standard A2. It has a completely oil-proof and dust-proof structure.

● Up to 4 cables can be tightened simultaneously. ● By using a diameter-reducing rubber, cables of different sizes can also be connected at the same time. ● The diameter-reducing rubber has a membrane and can also be used as a blind cap for spare wires.

It is ideal for the bending part of the cable.

The tapered seal rubber tightly grips the cable uniformly and provides excellent sealing, protecting the equipment from water, oil, and other substances. It is made of metal, making it resistant to external impacts. It comes in a variety of sizes and can be used with wires of all thicknesses. There are also options that use silicone rubber for high-temperature applications (up to +180°C).

1. When you want to pull the cable at a right angle, the L-shaped design of the main body protects the bending part of the cable. 2. The perfect sealing effect completely blocks external water, oil, and dust, protecting the internal precision components. (IP68) 3. The ideal claw (Type A) exhibits excellent clamping force with light tightening. 4. Made of flame-retardant nylon 66 that is resistant to organic solvents, with impact resistance and insulation rated UL94V-2. 5. It is lightweight and excels in chemical resistance, heat resistance, and electrical insulation. 6. The standard type differs only in the L shape of the main body, while all other components are the same. (By replacing the rubber seal of the standard type, it can also accommodate multi-core wires and flat/parallel cables.) 7. The long foot type has a longer mounting screw section and is designed for thick plates.

● We use flame-retardant nylon 66 (UL certified material) that is resistant to organic solvents and has excellent mechanical strength. ● A wide range of sizes is available for compatible cable outer diameters from Φ3.0 to Φ38.0. ● Lock nuts and rubber packing are included accessories.

Low-cost general-purpose cable gland

The combination of the lightweight, rigid, highly insulating, and chemically resistant PP body with the fluorine rubber seal, which excels in high temperature and chemical resistance, makes it ideal for chemical equipment, petroleum refining sites, semiconductor manufacturing, and automotive applications. The ideal claws/seals that are separable from the body (Type A) allow for easy penetration of wires with an outer diameter close to the seal's interior, demonstrating excellent clamping force with light tightening. The perfect sealing effect completely isolates the internal precision components from external water, oil, and dust (IP68).

● Effective in high-temperature environments such as around furnaces, heaters, and automotive engine rooms. ● The ideal claws/seals that can be separated from the main body (Type A) allow wires with an outer diameter close to the inner diameter of the seal to pass through easily, demonstrating excellent clamping force with light tightening. ● The perfect sealing effect completely blocks external water, oil, and dust, protecting internal precision components. (IP68)

● Strong against acids and alkalis, the combination of a lightweight and hard polypropylene body and an EPDM seal is ideal for environments that require corrosion resistance. ● With light tightening, it offers excellent clamping force and perfect sealing effect, just like other type A models. (IP68)

The combination of a UL94V-O rated 66 nylon body with excellent flame resistance and a flame-resistant EPDM seal makes it ideal for equipment that requires higher flame resistance. The outstanding clamping force and perfect sealing effect with light tightening are the same as other Type A models. (IP68)

● Ideal for wire outlets of small motors, sensors, detection heads, measuring instruments, and panels in high-temperature environments or narrow spaces. (M8・M10/World's first) ● The main body has protrusions on the inside of the finger tip (excluding MGB8 and MGB10), providing excellent clamping force with light tightening. ● The perfect sealing effect completely blocks external water, oil, and dust, protecting the internal precision components. (P68)

● Due to its extremely small size, it is ideal for electrical wire outlets in compact motors, sensors, detection heads, measuring instruments, panels, and other narrow spaces. (M8・M10/World's first) ● The main body features protrusions on the inside of the finger tip (excluding MGB8 and MGB10), providing excellent clamping force with light tightening. ● The perfect sealing effect completely isolates internal precision components from external water, oil, and dust. (IP68)

It is suitable for applications with limited installation space and requiring excellent waterproofing (IP68), to secure fine wires. Due to its special structure, it can accommodate outer diameters from φ2mm to φ5.5mm in two sizes.

Skin Top MS is used as a fully waterproof metal gland in various fields, including machinery, equipment, measuring instruments, chemical plants, medical devices, and many others. O-rings are included as standard in all sizes.

The unique spiral structure accurately protects the cable from bending actions.

It uses polyamide with excellent chemical and environmental resistance, and has various outstanding features such as a quick installation structure that makes cable fixing easy. It can be widely used in various mechanical devices, measuring instruments, control devices, automation equipment, electronics technology, and robotics. Sizes PG36 and M40 and above come standard with O-rings.

This product is a small cable connector for thin cables. The dimensions of the connector body have been minimized to achieve space-saving design. It can securely clamp cables with a diameter of 1.5 to 4.0 mm at this size and can be used as a fully waterproof type. The sealing rubber is made of nitrile rubber, which excels in oil resistance, heat resistance, and weather resistance. ■ Heat resistance: -30°C to 80°C ■ Waterproof: Underwater 10 cm for 1 week ESS-2 (when using 3 mm round cable)

The "PF(G) Screw/NPT Screw to M Screw Conversion Adapter" allows connection between mounting holes with PF(G) or NPT screw machining and equipment with metric screws. It enables a wide range of equipment to be used simply and simplifies the wiring of control circuits. The material is copper alloy. An M screw explosion-proof type is also available. The explosion-proof structure symbol is II2GD EExdII IP66, and the certification number is Nemko 03ATEX 1453X. 【Features】 ■ A wide range of equipment can be used simply ■ Simplifies wiring of control circuits ■ Material: Copper alloy ■ M screw explosion-proof type also available *For more details, please refer to the PDF document or feel free to contact us.

The "PF(G) Screw Reduction Adapter (Die-Cast)" is an adapter made of zinc die-cast with male and female parallel pipe threads. It comes with a sheet packing to ensure sealing on the wall surface of the male thread section. The material is zinc alloy die-cast with electric zinc plating (trivalent unichrome). 【Features】 ■ Equipped with male and female parallel pipe threads ■ Zinc die-cast adapter ■ Includes sheet packing *For more details, please refer to the PDF document or feel free to contact us.

The "PF(G) Screw Expansion Adapter (Die-Cast)" is an adapter made of zinc die-cast with male and female parallel pipe threads. It comes with a sheet packing to ensure sealing on the wall surface of the male thread section. The material is zinc alloy die-cast with electro-galvanized (trivalent unichrome) coating. 【Features】 ■ Equipped with male and female parallel pipe threads ■ Made of zinc die-cast ■ Includes sheet packing *For more details, please refer to the PDF document or feel free to contact us.

The "PG→PF(G) Screw Conversion Adapter" is an adapter that allows you to connect your currently used flex connectors to multi-pole electrical connectors and electrical equipment that comply with the German DIN standard. It enables a wide range of devices to be used easily and simplifies the wiring of control circuits. It couples with various MAS and KCP flex connectors. The material is C3604 (brass). This document also includes a dimensional table by type. 【Features】 ■ Connectable to multi-pole electrical connectors and electrical equipment ■ A wide range of devices can be used easily ■ Simplifies wiring of control circuits *For more details, please refer to the PDF document or feel free to contact us.

The "Skin Dihit MA-PG/M" is a screw conversion adapter that has a PG thread on the outside and an M thread on the inside. You can use an M thread cable gland in the PG thread hole, and there are two types of shapes: A and B. The material is brass with nickel plating. 【Features】 ■ PG thread on the outside and M thread on the inside ■ M thread cable gland can be used in the PG thread hole ■ Two types of shapes: A and B *For more details, please refer to the PDF document or feel free to contact us.

The "Skin Dihito A-PG/M" is a screw conversion adapter that has a PG thread on the outside and an M thread on the inside. You can use an M thread cable gland in the PG threaded hole, and there are two types of shapes, A and B. The material is glass fiber reinforced polyamide, and the operating temperature range is -40°C to +100°C. 【Features】 ■ PG thread on the outside and M thread on the inside ■ M thread cable gland can be used in the PG threaded hole ■ Two types of shapes: A and B ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.

The "SkindiHit MR" is a PG screw reduction adapter. The screw holes processed in machines and equipment may be too large or too small compared to the actual required cable gland. This product solves such problems. The material is brass with nickel plating. 【Features】 ■ Can reduce screw holes ■ Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.

The "Skindihit EKU" is an adapter that enlarges PG thread sizes. It allows the use of cable glands that are larger than the threaded holes processed in machines and equipment. The material is fiberglass-reinforced polyamide. The operating temperature range is -20°C to +80°C. 【Features】 ■ Can enlarge PG thread sizes ■ Material: fiberglass-reinforced polyamide ■ Operating temperature range: -20°C to +80°C *For more details, please refer to the PDF document or feel free to contact us.

"Skin Dihito ME" is an adapter that enlarges PG screw holes in machines, equipment, and housings. The material is brass with nickel plating. 【Features】 - Enlarges PG screw holes in machines, equipment, and housings - Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.

The M screw enlargement adapter "Skindihit EKU-M" is an adapter used to secure cable glands that are larger than the pre-processed mounting screw holes in machines, devices, and housings. The material is glass fiber reinforced polyamide. The operating temperature range is -40°C to +100°C. 【Features】 ■ Can secure cable glands larger than pre-processed screw holes ■ Material: Glass fiber reinforced polyamide ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.

The M screw enlarging adapter "Skindihit ME-M" is an adapter used to secure cable glands that are larger than the pre-processed mounting screw holes in machines, devices, and housings. The material is brass with nickel plating. An explosion-proof type is also available. 【Features】 ■ Used to secure cable glands that are larger than the pre-processed screw holes ■ Material: Brass + Nickel plating ■ Explosion-proof type available *For more details, please refer to the PDF document or feel free to contact us.

The "Skindihit KU-M" is an adapter used to secure grounds that are smaller than the processed mounting screw holes. The material is fiberglass reinforced polyamide, and the operating temperature range is -40°C to +100°C. 【Features】 ■ Used to secure grounds smaller than the mounting screw holes ■ Material: fiberglass reinforced polyamide ■ Operating temperature range: -40°C to +100°C *For more details, please refer to the PDF document or feel free to contact us.

The "M Screw & G Screw Reducer Adapter (Made of SUS)" is a stainless steel (SUS 304) reducer used when connecting a threaded pipe to a male thread, such as a hub of an exposed box, when the male thread is large. 【Features】 ■ Reduces the thread size ■ Material: Stainless Steel (SUS304) *For more details, please refer to the PDF document or feel free to contact us.

The "Skin Dihit MR-M" is a reducing adapter used to secure a ground that is smaller than the processed mounting screw holes. The material is brass with nickel plating. 【Features】 - Can secure a ground that is smaller than the processed mounting screw holes - Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.

The "Skin Dihit MA-M/NPT" is a conversion adapter used to secure an NPT threaded gland to a mounting hole that has been machined with M threads. The outer side has M threads, while the inner side has NPT threads. (EN 50262) The material is brass with nickel plating. 【Features】 ■ Can secure an NPT threaded gland to a mounting hole that has been machined with M threads ■ Outer side has M threads, inner side has NPT threads ■ Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.

The "Skindihit ZS-M" is a conversion adapter used to secure a PG screw gland to a mounting hole that has been processed with M screws. The outer side has M threads, and the inner side has PG threads. The material is brass with nickel plating. 【Features】 - Can secure a PG screw gland to a mounting hole processed with M screws - Outer side has M threads, inner side has PG threads - Material: Brass with nickel plating *For more details, please refer to the PDF document or feel free to contact us.

The "M Screw Adapter" is an adapter that allows connection between mounting holes that have been processed for M screws and equipment with metric screws. It enables a wide range of devices to be used simply, simplifying the wiring of control circuits. The material is C3604 (brass). 【Features】 ■ Allows a wide range of devices to be used simply ■ Simplifies wiring of control circuits ■ Material: C3604 (brass) *For more details, please refer to the PDF document or feel free to contact us.

The "PF(G) to PG Thread Conversion Adapter" is a conversion adapter made of polyamide resin that has a PG male thread and a PF(G) female thread. The material is PA. This document also includes a dimension table by type. 【Features】 ■ Made of polyamide resin ■ Material: PA *For more details, please refer to the PDF document or feel free to contact us.

The "MS Adapter" is an adapter for Canon plugs that allows connection between the flex connector you are currently using and the MS A/B connector (MS round connector). It simplifies the wiring of control circuits, reduces troubles, and achieves labor-saving maintenance. The material is C3604 with nickel plating. This document also includes a dimension table for the MS adapter. 【Features】 ■ For Canon plugs ■ Simplifies wiring of control circuits ■ Fewer troubles ■ Achieves labor-saving maintenance *For more details, please refer to the PDF document or feel free to contact us.