ハギテック List of Products and Services

The K-Flex Type KUU is a product that has passed the US UL standards, while Type KSC has passed the Canadian CSA standards. KUU incorporates copper wire within spiral tubes sized #12 to #36, reducing the electrical resistance of the tube and providing a structure to ground any potential short-circuit current. Sizes #42 to #104 do not incorporate copper wire and have a structure where the spiral tube is bent into an interlock. Therefore, when using sizes #42 and above, please add a separate ground wire to the wiring according to Section 351 of the NEC (National Electrical Code). Additionally, nylon bushings are standardly incorporated at the connector terminal. K-Flex Type KUU is registered under the US UL standard UL360 "Liquid-Tight Flexible Steel Conduit." The structure of the tube features a core made of zinc-coated steel band, covered with UL-compliant vinyl that is flame-retardant and weather-resistant.

• Other machine elements

The K-Flex Type KCS is a registered product under the Canadian CSA standard C22.2 No. 56 "Flexible Metal Conduit and Liquid Tight Flexible Metal Conduits." The structure of the conduit features a core made of galvanized steel strip coated with oil-resistant and highly flexible vinyl as a jacket.

• Other machine elements

This is a connector for connecting K-Flex to the knockout of control panels.

• Other machine elements

This is a connector for connecting K-Flex to the knockout of control panels.

• Other machine elements

This is a connector for connecting K-Flex to the knockout of control panels.

• Other machine elements

By placing electrical equipment that serves as an ignition source inside a container with explosion-proof performance, the structure is designed to ensure that even if an explosion occurs inside the container, it does not affect the outside. It must have sufficient strength to withstand internal explosions and prevent fires from igniting externally through gaps in the container's joints.

• Other machine elements

The explosion-proof structure that is applied only to electrical equipment that does not act as an ignition source during normal operation and functioning is designed to enhance safety in environments where such equipment is used continuously. Even electrical equipment that typically does not act as an ignition source can become a potential ignition source, such as through insulation failure, leading to electrical sparks. Therefore, structures that are designed to minimize the likelihood of generating such ignition sources are referred to as increased safety explosion-proof structures, and there are limitations on the types of electrical equipment to which they can be applied. Even equipment that does not act as an ignition source under normal conditions cannot be applied if it cannot have its safety increased.

• Other machine elements

Low-cost and flexible cable, hose, and splash protection flex.

• Other machine elements

This is a knife specifically designed for cutting flexible materials with a vinyl exterior and wire blade exterior.

• Cutter/Scissors

Special scissors for flex cuts

• Cutter/Scissors

"Sumitube A" is a general-purpose heat shrink tube. It has excellent oil resistance and chemical resistance, with a transparent color. It is suitable for color identification of electric wires, bundling, insulation and protection of resistors, capacitors, etc. Additionally, the applicable standard is based on Sumitomo Electric's fine polymer specifications. It can be produced in 11 colors, including black, brown, and red. [Features] ■ Excellent oil resistance and chemical resistance ■ Transparent color *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube C" is a general-purpose heat shrink tube that shrinks at low temperatures. The material is electron beam cross-linked soft polyolefin resin. It shrinks at low temperatures. This product is available in a transparent color "standard type" and a thick-walled type for terminal protection "UL standard type." It is suitable for insulation, protection, and reinforcement of wire terminals and wire connections. 【Features】 <C Type Standard> ■ Shrinks at low temperatures (90°C) ■ Flexible ■ Transparent color <C Type UL Standard> ■ Shrinks at low temperatures (90°C) ■ Thick-walled type for terminal protection *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube A4" is a heat shrink tube with excellent weather resistance. It comes in glossy opaque colors. The available colors include 11 options such as red, orange, and yellow. It is suitable for insulation and decoration of parts used outdoors, insulation and protection of antennas, as well as insulation and reinforcement of wire ends. [Features] - Excellent weather resistance - Glossy opaque colors (excluding transparent) *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube B" is a flame-retardant heat shrink tube for general use. The material is electron beam cross-linked flexible flame-retardant polyolefin resin. It can be used continuously at temperatures ranging from -45 to 120°C. It is suitable for automotive parts, insulation and protection of harnesses, corrosion prevention of various pipes, and prevention of electrolysis. 【Features】 ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube A2" is a transparent flexible heat shrink tube that complies with the SAE-AMS-DTL-23053 standard. It is available only in transparent color. It is suitable for insulation, protection, reinforcement of wire terminals and wire connections, as well as securing and protecting cable labels. 【Features】 ■ SAE-AMS-DTL-23053 compliant ■ Transparent ■ Flexible *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube LA" is a large-diameter, thick-walled heat shrink tube. It can be used continuously at temperatures ranging from -55 to 105°C. It is suitable for electrical insulation of various busbars and for insulation and protection of large-diameter metal pipes. It complies with the specifications of Sumitomo Electric Fine Polymer. The available colors for production are 11 colors including orange, yellow, and green. [Features] ■ Large diameter ■ Thick wall *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube LB" is a flame-retardant heat shrink tube with a large diameter and thick wall. The material is electron beam cross-linked flexible flame-retardant polyolefin resin. It is flame-retardant without the use of chlorine-based flame retardants or specific brominated flame retardants (PBDE, PBB). It is suitable for electrical insulation of various busbars and for insulation and protection of large diameter metal pipes. Additionally, it is available in 9 colors, including black, brown, and red. [Features] - Large diameter, thick wall - Flame-retardant (without chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube F(Z)" is a flame-retardant heat shrink tube rated for 105°C that complies with the SUL224 standard. The surface of the tube is printed with the text "VW-1-F-SUMITOMO-K SUMITUBE F(Z) CAT 939 105°C." It is suitable for insulation, protection, reinforcement of wire terminals and connections, as well as for color identification and bundling of wires. 【Features】 ■ UL224 compliant ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) ■ Flexible *For more details, please refer to the PDF materials or feel free to contact us.

• Composite Materials

The "Sumitube F2(Z)" is a flame-retardant heat shrink tube rated for 125°C, compliant with UL and CSA standards. It does not use chlorine-based flame retardants or specific brominated flame retardants (PBDE, PBB). It is suitable for insulation and protection of resistors, capacitors, and other components. The surface of the tube is printed with the text "125°C VW-1 SUMITOMO-K SUMITUBE F2(Z) CAT 940 CSA 125°C VW-1-F-." 【Features】 ■ UL224 and CSA compliant ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) ■ Flexible *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

The "Sumi Tube F3(Z)" is a thin-walled, flexible, flame-retardant heat shrink tube that complies with UL224 standards. It can be produced in 10 colors, including black, brown, and red. It is suitable for color identification of wires, bundling, insulation and protection of resistors, capacitors, etc. The material is a cross-linked soft flame-retardant polyolefin resin. 【Features】 ■ UL224 compliant ■ Thin-walled, reduced shrinkage time ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) ■ Flexible *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

The "Sumi Tube F4(Z)" is a thin-walled, highly flexible heat shrink tube rated for 125°C, compliant with UL and CSA standards, and flame-retardant. It can be used continuously at temperatures ranging from -55 to 125°C. It is suitable for insulation, protection, and reinforcement of wire terminals and wire connections. It is flame-retardant without the use of chlorine-based flame retardants or specific brominated flame retardants (PBDE, PBB). It can be produced in 10 colors, including blue, purple, and gray. 【Features】 ■ UL224 and CSA standard compliant ■ Thin-walled, reduced shrinkage time ■ Flame-retardant (no chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB] used) ■ Flexible *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube B2" is a flexible flame-retardant heat shrink tube that complies with SAE-AMS/UL/CSA standards. It is suitable for insulation and protection of resistors, capacitors, etc. It can be used continuously at temperatures ranging from -55 to 135°C. It does not use chlorine-based flame retardants or specific brominated flame retardants (PBDE, PBB). It can be produced in 10 vibrant colors, including red, orange, and yellow. 【Features】 ■ SAE-AMS/UL224/CSA compliant ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) ■ Flexible ■ Vibrant colors *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube B2 (3X)" is a high-shrink-rate flame-retardant heat shrink tube that complies with UL and CSA standards. It shrinks to one-third of its original inner diameter with a high inner diameter shrinkage rate. It is suitable for insulation, protection, and reinforcement of objects with significant step differences, as well as for color identification and bundling of wires. It can be produced in ten vibrant colors, including green, blue, and purple. 【Features】 ■ High inner diameter shrinkage rate (shrinks to one-third of its original diameter) ■ UL224 and CSA standard compliant ■ Flame-retardant (does not use chlorine-based flame retardants or specific brominated flame retardants [PBDE, PBB]) ■ Vibrant colors *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube V (300V)" is a transparent flame-retardant heat shrink tube that complies with UL/CULUS standards. The material is soft flame-retardant polyvinyl chloride resin. It can be used continuously at temperatures ranging from -30 to 105°C. It is suitable for fixing and protecting cable labels, as well as for insulation and protection of resistors, capacitors, etc. 【Features】 ■ UL224 (UL/CULUS) compliant ■ Flame-retardant ■ Transparent *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube V (600V)" is a transparent flame-retardant heat shrink tube rated for 105°C that complies with UL/CULUS standards. It can be used continuously at temperatures ranging from -30 to 105°C. It is available only in transparent color. It is suitable for insulation, protection, and reinforcement of wire terminals and wire connections, as well as for securing and protecting cable labels. 【Features】 ■ Flame-retardant ■ Transparent ■ UL224 (UL/CULUS) compliant product *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

UL and CSA standard 125°C rated semi-rigid flame-retardant heat shrink tubing

• Composite Materials

SAE - Flame-retardant heat shrink tubing with the flexibility of rubber that meets AMS and UL standards.

• Composite Materials

"Sumitube K" is a transparent flame-retardant heat shrink tube that excels in heat resistance, oil resistance, and chemical resistance. It meets SAE-AMS, UL224, and CSA standards. It is suitable for insulation, protection, and reinforcement of wire terminals, wire connections, and connectors, as well as for protecting wires and various components exposed to high temperatures, chemicals, and oils. 【Features】 ■ SAE-AMS and UL224 compliant (also CSA certified) ■ Flame-retardant ■ Transparent ■ Thin-walled ■ Semi-rigid ■ Excellent oil and chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

Transparent flame-retardant heat shrink tubing with excellent heat resistance, oil resistance, and chemical resistance.

• Composite Materials

Transparent flame-retardant heat shrink tubing that shrinks at low temperatures and excels in flexibility, heat resistance, oil resistance, and chemical resistance.

• Composite Materials

"Sumitube W" is a heat-shrink tube with a heat-melt adhesive inside. It has a two-layer structure with an inner layer inserted into the outer layer. It is effective for filling objects with significant surface irregularities. Available colors are black and transparent. It is suitable for insulation, protection, and reinforcement of wire terminals, wire connections, and connection terminals. 【Features】 ■ Two-layer structure with an inner layer inserted into the outer layer ■ Effective for filling objects with significant surface irregularities *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

The "Sumi Tube W3C" is a heat shrink tube with adhesive that is effective for waterproofing objects with significant height differences in their coverings. The thickness of the adhesive is greater than that of the "Sumi Tube O2C." It has adhesive properties for metals, polyolefins, and PVC, making waterproofing possible. It is suitable for processing wire branching points and insulating protection for wire adhesion points. 【Features】 ■ Has adhesive properties for metals, polyolefins, and PVC, enabling waterproofing ■ Effective for waterproofing objects with significant height differences in their coverings ■ Flexible ■ The thickness of the adhesive is greater than that of the "Sumi Tube O2C" ■ Available in transparent options *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials

"Sumitube O2C" is a heat shrink tube with adhesive that is effective for fixing and waterproofing coated objects with linear shapes (such as pipes). It has adhesive properties for metals, polyolefins, and PVC, and is capable of waterproofing. The thickness of the adhesive is thinner than that of "Sumitube W3C." Additionally, it is suitable for waterproofing and corrosion protection of various pipes, as well as for insulating the adhesive joints of electrical wires. 【Features】 ■ Adhesive properties for metals, polyolefins, and PVC, with waterproofing capability ■ Effective for fixing and waterproofing coated objects in pipe shapes ■ Flexible ■ Thinner adhesive thickness compared to "Sumitube W3C" ■ Available in transparent options *For more details, please refer to the PDF materials or feel free to contact us.

• Composite Materials

Adhesive-backed thick-walled heat shrink tubing

• Composite Materials

Flame-retardant shrink tubing with adhesive, effective for fixing linear-shaped covered objects and waterproofing.

• Composite Materials

Adhesive flame-retardant heat shrink tubing effective for waterproofing objects with significant height differences.

• Composite Materials

Flame-retardant heat shrink tubing with adhesive, effective for waterproofing objects with significant step differences.

• Composite Materials

Flame-retardant heat shrink tubing with adhesive, effective for waterproofing objects with significant step differences.

• Composite Materials

Thin-walled, flexible heat shrink tubing

• Composite Materials

Single-layer structure, thin-walled, semi-rigid heat shrink tubing.

• Composite Materials

Thin, thick, and flexible (Type 2: Halogen-free) heat shrink tubing.

• Composite Materials

Two-layer structure, waterproof type, thin-walled, semi-rigid heat shrink tube.

• Composite Materials

Two-layer structure, waterproof type, thin-walled, semi-rigid, halogen-free heat shrink tubing.

• Composite Materials

Two-layer structure, waterproof type, thin-walled, flexible heat shrink tube.

• Composite Materials

Two-layer structure, waterproof type, thin-walled, flexible heat shrink tubing.

• Composite Materials