アーレスティ テクノサービス Product Lineup

This catalog features die-casting peripheral equipment handled by Aresti Techno Service Co., Ltd. Our company offers products that can be used in various scenes within die-casting factories, categorized into "mold cooling," "management devices," "inspection," and more. When considering quality improvement, production efficiency enhancement, or cost reduction, please make use of this catalog. [Contents] ■ Mold Cooling ■ Management Devices ■ Inspection ■ Casting and Mold Assistance ■ Mold Parts *For more details, please refer to the PDF document or feel free to contact us.

• Cooling system
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "Cooling Water Filter (Backwash Type)" is a product that is installed at the entrance of jet cooling systems and soft water devices to remove debris, sand, slime, and other contaminants, preventing blockages in the cooling water channels. There is no need to remove the filter for cleaning. Additionally, the filter is naturally backwashed with filtered water without interrupting the flow to the filter during normal operation. 【Features】 ■ No need to remove the filter for cleaning ■ The filter is naturally backwashed with filtered water without interrupting the flow to the filter during normal operation *For more details, please refer to the PDF document or feel free to contact us.

• Cooling system
• Other filters

The "Flow Meter" is a device that monitors and determines changes in the flow rate of high-pressure cooling water for fine hole cooling, which is discharged from the jet cooler system. As a successor to the Flow Watcher, it can not only detect the ON/OFF of the flow but also confirm changes in the flow rate. It automatically creates trend graphs of the flow rate, making it easy to see the flow trends at a glance. 【Features】 ■ Instantaneous flow rate and cumulative flow for eight jet coolers can be displayed on one screen. ■ Upper and lower limit values can be set for each jet cooler. ■ Upper and lower limit settings can be saved for each mold. ■ An abnormal signal can be issued if the limits are exceeded. ■ Depending on the connection method with the die-casting machine, automatic stop of the die-casting machine is also possible. *For more details, please refer to our catalog or contact us through the inquiry form on our website. https://www.ahresty-tec.jp/contact/

• Flow Meter
• Flow Control

"Miryu" is a water flow confirmation device that allows you to check the flow state of cooling water in molds. Mounting brackets are included for all models. When the cooling water flows through the mold, a rotating ball moves, allowing for an immediate visual confirmation of the flow state. Additionally, the front of the device is equipped with a reinforced acrylic panel, which offers excellent heat resistance and durability. 【Features】 ■ For jet coolers ■ The front of the device is made with a reinforced acrylic panel, providing excellent heat resistance and durability ■ The rotating ball moves when the cooling water flows, allowing for immediate visual confirmation of the flow state ■ Mounting brackets are included for all models *For more details, please refer to the PDF document or feel free to contact us.

• Cooling system
• Other water treatment equipment

■ Detect and confirm the water flow status of the flow path, and output signals externally. It can detect the cooling water discharged from the jet cooler, enabling early detection of cooling troubles such as: - The core pin with cooling holes is broken - The cooling pipe is clogged - The cooling tube is disconnected - The cooling tube is crushed and not allowing water flow *This product is exclusively for the cool system, so please refer to the jet cool system.

• Water Hydraulic Equipment

"CO-TB" is our original fluororesin tube (PTFE) designed for use in die casting. In response to requests such as "I want a color variation of tubes with high heat resistance" and "I want to color-code caution areas with fluororesin tubes," we have added yellow and green, which are popular in φ4, to φ6 and φ8 as well. To meet the demand for maintaining flow rate, we have added some colors in an outer diameter of φ4 and an inner diameter of φ2.5. It can also be used for mold cooling tubes other than fine hole mold cooling pipe jet coolers. 【Features】 ■ Our original product designed for use in die casting ■ Delivery time is shipping on the third working day after order confirmation ■ For large order quantities, please consult us separately *For more details, please refer to our catalog or contact us through the inquiry form on our website. https://www.ahresty-tec.jp/contact/

• tube

■Separates and removes minerals (calcium, magnesium) that are abundant in tap water and industrial water. 【Effects】 - Prevents the internal cooling pipes and cooling channels from becoming clogged with scale. This helps to prevent a decrease in cooling efficiency and cooling failures. - By using it as washing water for cast products, it can prevent the adhesion of mineral components to the product surface. 【Features】 - Operates fully automatically with just a simple setup. - Regularly replenishing the dedicated salt regenerates the ion exchange resin. - The use of ion exchange resin ensures a continuous supply of high-quality soft water.

• Other surface treatment equipment

The "Injection Monitor" is an injection management device that can be used for traceability of quality records. It captures three points: injection stroke, operating oil pressure, and elapsed time, and calculates six points: high-speed, low-speed, pressure rise time, casting pressure, biscuit thickness, and cycle time (standard measurement items). It can be used to establish casting conditions during prototyping, and it allows for low-cost normal and abnormal judgment during casting, as well as replacement measurements for aging measurement devices. 【Features】 - Calculation results are displayed on a touch panel. - Waveform data for 5 shots and measurement data for 100 shots can be confirmed on the touch panel. - Equipped with a standard memory card (4GB) for saving measurement data. - Easy to save data to a computer or external HDD. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "R Series" is a device that reduces the pressure inside a tank using a vacuum pump and operates to reduce the pressure within a cavity through the control of electromagnetic valves. It enables a vacuum level close to complete vacuum and achieves stable high cycles. It is equipped with a vacuum tank that shortens vacuum time and a vacuum trap that protects against foreign substances. Additionally, the control method involves the opening and closing of electromagnetic valves, and it has a function for arbitrary vacuum level setting. 【Features】 ■ Developed based on trust and proven results in impregnation technology ■ Enables a vacuum level close to complete vacuum and achieves stable high cycles ■ Equipped with a vacuum tank that shortens vacuum time and a vacuum trap that protects against foreign substances ■ Optional vacuum valves and cart handles can also be installed ■ Control allows for switching between PF, GF, chill vent, etc., on a touch panel *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment
• Pressure Control

Anti-Burning ● When casting with thin core pins without cooling, they show signs of burning after 50 shots, whereas using the Jet Cool System (Model: JECSS), the core pins show almost no burning even after 5000 shots of casting. Reduction of Core Pin Polishing Time ● Traditionally, core pins were polished more than once a day, but with the use of JECS, they can be cast for a month (over 5000 shots) without polishing. ● Reduction in Leakage Defect Rate - The rapid cooling of the area around the core pins forms a strong chill layer. ● Prevention of Shrinkage Cavity Formation around Core Pins ● Using JECSS allows for faster solidification around the core pins, pushing shrinkage cavities inward.

• Cooling system