タクボエンジニアリング Product Lineup

● A painting booth that uses a special oil in the cleaning solution. ● The oil catches overspray mist. ● With a low noise design of 68db, conversations can be held even in front of the booth. It allows for painting that takes into consideration the surrounding environment. ● By connecting a sludge recovery device (optional), sludge can be semi-automatically processed and solidified through a centrifugal separation method, significantly reducing industrial waste costs.

Economical mist inhalation booth using oil

This product is a painting system for smartphone cover components that reduces unnecessary paint consumption and enables high-quality ultra-gloss piano touch painting. The electrical capacity is reduced by 40% compared to balance arm-type robots. It controls paint in units of 1CC, achieving production with low energy consumption. Additionally, the cylinder can be easily detached, allowing for quick maintenance. 【Features】 ■ Extremely excellent film-forming properties ■ Low total energy costs ■ High mass production effect with low energy ■ Addresses environmental impact reduction ■ Established modular assembly robot *For more details, please refer to the PDF document or feel free to contact us.

- Acts as a key station for painting and allows the transferred data to be compatible with the same Softboy Pro series. - Faithfully reproduces data and supports the globalization of painting. - Enables numerical management of paint consumption, painting time, painting conditions, and more. - Also adapts to the traceability of painting and serves as an educational tool for robot operators, contributing to the improvement of painting technology levels.

Optimized for painting cosmetics, molded products, lipsticks, and rouges. By simply replacing the fixed gun of the spindle line with the dedicated robot "Swan C," digital painting is realized. The intelligent painting robot "Swan C" improves painting costs. Simulation of coating efficiency through fluid analysis: ● Standard fixed gun and spindle painting: approximately 7% ● Painting robot system "Swan C": approximately 42% (According to tests by Takubo Engineering Co., Ltd.)

The TB21-23BS is a paint booth designed for installation with a painting robot. It is a low-ceiling specification paint booth that can be introduced in workplaces with low ceiling heights. The total height is approximately 2,840mm, and the exhaust fan is designed on the side of the booth to keep the height low. High-purity mineral oil is used for the cleaning solution. The low-profile design allows for conversation even in front of the booth. The cleaning solution uses oil (TAKBO OIL), making it resistant to rust and providing a long lifespan of about 30 years. ● Low noise design of approximately 63db ● Dust removal efficiency of about 95% ● Long lifespan of approximately 30 years ● Oil is used in the cleaning solution ● Oil can be used semi-permanently (in case of paint sludge recovery)

The indium mirror coating system is a dedicated coating process optimized for forming indium-based high-reflectivity mirror films. The standard process consists of a 3-coat, 3-bake structure (repeating application and drying three times), and the management of film thickness, heating conditions, and environmental control during each step significantly affects optical properties and adhesion. In particular, parameters such as the concentration of fine particles, temperature and humidity, and electrostatic environment within the painting booth influence the final film quality (reflectivity, durability), making the formation of the coating in a clean and stable environment extremely important. **Features and Benefits of Indium Mirror Coating** - A new metal color spray method that achieves reduced environmental impact: A coating system using spray painting technology as a replacement for traditional plating processes. - Compatibility with various materials: Forms a highly adhesive and uniform film on various substrates such as stainless steel, resin, and glass. - Excellent radio wave transmission characteristics: Equipped with radio wave transmission performance suitable for radar and communication devices, differing from optical high-reflectivity films, making it ideal for sensor-related applications. - Automation compatibility and multilayer coating: Can be integrated into automated lines in conjunction with Takubo's painting robots. Durability can be adjusted through multilayering from the base layer to the protective layer.

Adding decorative elements or UV hard coats on top of the indium mirror coat (intermediate layer) for multifunctionality and diverse expressiveness. The indium mirror coating system does not guarantee the expression of image photos. It represents a world of creative possibilities. Verification through painting tests is necessary. For creating samples and establishing conditions for sample production, the Data Pro (a painting robot dedicated to data creation) is optimal. - Color samples - Various color developments possible with matte and mirror finishes - The base material is diverse.

On August 3, 2025 (Sunday), at Fuji Speedway in Gotemba City, the rear Lexus emblem of the Anest Iwata Racing Toyota Lexus GT car was coated with "Indium Mirror Coating" during the Super GT300 event. The color is blue (glossy) DRIFT Mirror BLUE. 【Indium Mirror Coating is applied using the painting robot "Swan Pro"】 Indium Mirror Coating is applied by the painting robot "Swan Pro." The painting process consists of 3 coats and 3 bakes. 【Indium Mirror Coating System】 Indium Mirror Coating is achieved through the Indium Mirror Coating System. - Class 10,000 clean room - Painting robots "Swan Pro" and "Swanist" - Paint supply system "Syringe Pump System" - Transport system for painted items "Co-Swan" - Dedicated drying machine for painting "Dry Tech" This system is designed for high mass production efficiency. 【Adding decorations or UV hard coat over Indium Mirror Coating (intermediate coat) for multifunctionality and diverse expressiveness】 - Abundant color samples - Various color developments possible for matte and mirror finishes.

The TB42-20B is a hand-spray compatible oil booth. It raises the oil pan to a convenient height, making it ideal for hand-spray work. The total height is approximately 3,400mm, with an opening width of 4,200mm. It is also equipped with hood lighting. The size can be adjusted according to the work requirements. It uses high-purity mineral oil for the cleaning solution. The low-profile design allows for conversation even in front of the booth. The cleaning solution includes oil (TAKBO OIL), making it resistant to rust and providing a long lifespan of about 30 years. ● Approximately 63dB low noise design ● Dust removal efficiency of about 95% ● Approximately 30 years of longevity ● Oil is used in the cleaning solution ● Oil can be used semi-permanently (in cases of paint sludge recovery)

**Sludge Recovery System "BOSS 2000"** The sludge recovery system "BOSS 2000" pumps up paint mist repaired in the oil booth, separates it using a 1600G centrifugal separator, and condenses, solidifies, or semi-solidifies the collected sludge, making it possible to reduce the cost of waste disposal for paint sludge to about one-fifth of the conventional amount. **Compression and Separation of Sludge by 1600G Centrifugation** The pump draws up the repaired paint mist from the oil booth, which is then separated by the 1600G centrifugal separator. The paint sludge is compressed for easy removal. Additionally, the oil from which the paint sludge has been removed is returned to the oil booth. **Significant Reduction in Waste Disposal Costs** The paint sludge is compressed into smaller sizes, significantly reducing the amount of waste for disposal and greatly lowering costs. **Note:** It is necessary to confirm the applicable paint. Please check with your sales representative. **Contact:** Takubo Engineering Co., Ltd. Sales Engineering Department TEL: 0475-50-0211 or please visit the Takubo Web Contact Page at https://www.takubo.co.jp/.

【Oil Used in Booth Cleaning Liquid】 A painting booth that uses oil in the cleaning liquid. The oil captures overspray mist. 【Booth Designed for Low Noise and Long Lifespan】 With a low noise design of 68db, conversations can be held even in front of the booth. It allows for painting that considers the surrounding environment. Since it does not use water, which is a cause of rust, it is a long-lasting booth that can operate for over 30 years without rusting. *Note: Depending on the installation environment, the outer panel may rust. 【Automatic Sludge Recovery】 By connecting a sludge recovery device (optional), sludge can be solidified through a centrifugal separation method, allowing for semi-automatic sludge recovery. This significantly reduces waste disposal costs. 【Layout Freedom】 The oil booth does not require drainage treatment facilities or water supply and drainage equipment. Layout is flexible, such as on the second floor of a factory. 【Oil Can Be Used Semi-Permanently】 The oil can be used semi-permanently as long as the paint sludge contained in the paint is removed. 【Oil Booth Compliant with Fire Safety Regulations】 The oil used meets both flash point and ignition point standards. The oil does not burn in typical fires. *Note: The outer panel (steel plate) may melt due to surrounding fires. 【Effects of the Oil Booth】 The painting environment changes. Waste disposal costs change.

Takubo Engineering Co., Ltd. is holding a grand appreciation festival to celebrate its 50th anniversary, expressing gratitude to all. Following the first event, we are responding to the strong demand by hosting this second event. All products manufactured by Takubo Engineering will be sold at special discounted prices. We will launch a campaign to express our gratitude and hope to everyone involved in painting. The details are as follows: For users considering the installation of new painting equipment, replacement, updates, or partial replacements of dryers, booths, robots, etc., please take advantage of this opportunity. 【Eligible Products】 ■ All products manufactured by Takubo Engineering ■ Includes painting systems, indium mirror coating systems, and other equipment. ■ Also includes standalone syringe pump systems and small explosion-proof motors. * The Scotch Gun series and sludge recovery device Boss 2000 are not included. 【Eligible Products】 * For more details, please refer to the product catalog available for PDF download. Feel free to contact us with any inquiries.

The Swan Coating System is a robotic painting system configured with the painting oil booth TB24-23B and the painting robot Swan Pro. It is a compact painting system that consolidates all the necessary equipment for painting, eliminating the hassle of ordering painting equipment individually. This is an example of a standard type robot combined with a booth for automatic painting. A compact automatic painting system built with the painting robot "Swan Pro" and "Oil Booth." - All necessary equipment is integrated, allowing for immediate production after installation. - The oil booth TB30-23, known for its quiet operation, significantly improves the working environment. *Here, "automatic painting" means that the robot automatically performs the painting on the designated parts. 【All necessary equipment for painting in one】 - Oil Booth: Dedicated for oil booth, using TABO-OIL - Swan Pro: Explosion-proof specification, 4-axis, self-standing painting robot - Automatic Spray Gun: Scotch Gun series, R11 gun - Syringe Pump System: Precision paint metering supply device - Robot Controller: Built-in control panel - Standard installation of Swanist: Teaching assistant software

All necessary equipment for painting in one! Automation through robotic painting made easy. The Swan Coating System is a robotic painting system that combines a paint oil booth and the Swan Pro painting robot. 【A compact painting system that consolidates equipment】 An example of a combination of a standard type robot for automatic painting and a booth, eliminating the hassle of arranging painting equipment individually. A compact automatic painting system built with the painting robot "Swan Pro" and "Oil Booth." - All necessary equipment is integrated, allowing for immediate production after installation. - The quiet oil booth TB30-23 is adopted, significantly improving the working environment. *Here, automatic painting means that the painting process is performed automatically by the robot. 【Consolidation of equipment necessary for painting】 - Oil Booth: Dedicated TABO-OIL for oil booth use - Swan Pro: Explosion-proof specification, 4-axis, self-standing painting robot - Automatic Spray Gun: Scotch Gun Series R11 Gun - Syringe Pump System: Precision paint metering supply device - Robot Controller: Built-in control panel - Standard installation of Swanist: Teaching assistant software