ウェーブクレスト List of Products and Services

These excellent cost-effective broadband antennas for radial isotropic measurements, covering frequencies from 150 MHz to 18 GHz, cover most RF sources such as LTE, GSM, UMTS, and WLAN. The new OmniLOG PRO series consists of a cost-effective ultra-broadband receiving antenna (1 W [CW]) on one hand and a high-power transmitting and receiving antenna (100 W [CW]) on the other. Therefore, these broadband antennas are ideal for radial isotropic measurements, interference exploration, or frequency monitoring as needed, including measures in conference rooms. Depending on the type, they cover all RF sources from FM to K band (for example, radio and television, mobile radio, DECT, Bluetooth, and WLAN). Each OmniLOG PRO is equipped with a high-tech antenna housing (IP65 certified) suitable for outdoor use to protect against environmental influences. It can be temporarily fixed and installed using a magnetic antenna base, such as on the roof of a car. The antennas have passed rigorous testing in the laboratory before shipment.

• Time-frequency measurements
• Other electronic measuring instruments
• EMC Testing

These excellent cost-effective broadband antennas for radial isotropic measurements, covering frequencies from 150 MHz to 18 GHz, cover most RF sources such as LTE, GSM, UMTS, and WLAN. The new OmniLOG PRO series consists of a cost-effective ultra-broadband receiving antenna (1 W [CW]) on one hand and a high-power transmitting and receiving antenna (100 W [CW]) on the other. Therefore, these broadband antennas are ideal for radial isotropic measurements, interference exploration, or frequency monitoring as needed, including measures in conference rooms. Depending on the type, they cover all RF sources from FM to K-band (for example, radio and television, mobile radio, DECT, Bluetooth, and WLAN). Each OmniLOG PRO is equipped with a high-tech antenna housing (IP65 certified) suitable for outdoor use to protect against environmental influences. The magnetic antenna base allows for temporary installation on surfaces such as car roofs. The antennas have passed rigorous testing in the laboratory before shipment.

• Time-frequency measurements
• Other electronic measuring instruments
• EMC Testing

The 3DRF tracking antenna IsoLOG 3D DF includes a high-density, customizable sector array. Additionally, you can extend the frequency range up to 9kHz by adding 8 or 16 dedicated low-frequency antennas. It can be equipped with a total of up to 64 independent antennas. This is the ideal solution for counter-surveillance measurements or drone detection systems (unmanned aerial vehicles). The wide frequency range eliminates the need to set up various antennas to save space and system costs. This allows for installation on vehicles (e.g., drive test cars) and use in covert operations. The antenna, which looks like a satellite broadcasting reception antenna for a camping van, is not recognized as a tracking antenna. The integrated switch array uses high-end digital switches instead of common RF relays. This enables ultra-fast switching speeds and guaranteed operational lifespan even during 24/7 operation. The "automatic rotation switch function" allows it to be used with any spectrum analyzer.

• EMC Testing
• Time-frequency measurements
• Other electronic measuring instruments

The TBRFH3 series RF housing is ideal for prototyping RF building blocks such as power splitters, directional couplers, and mixers. The housing is machined from aluminum and is equipped with an N female connector.

• Electronic Load Unit
• Other electronic measuring instruments
• Other optical parts

The TBRFH4 housing is ideal for RF building blocks such as amplifiers. The housing is made from aluminum using a milling machine and is equipped with an SMA female connector and a feed-through capacitor for the power line.

• Electronic Load Unit
• Other electronic measuring instruments
• Other optical parts

.

• Electronic Load Unit
• Other electronic measuring instruments
• Other optical parts

.

• Electronic Load Unit
• Other electronic measuring instruments
• Other optical parts

A 9kHz high-pass filter to protect the RF input of a spectrum analyzer or EMI receiver from residual 50Hz voltage in high amplitude fractional harmonic and conducted emission measurement setups.

• Electronic Load Unit
• Other electronic measuring instruments

The TBOH02 is a high-precision self-powered active load. It operates at a low voltage of 2V without requiring individual power supply voltages. Its features include constant resistance and constant current modes. A 10-turn potentiometer with a dial, range switch, and high-precision reference allows for accurate setting of current or resistance. Additionally, it can be controlled by an external voltage. The design is completely analog. Power supply noise measurements using the TBOH02 as a load do not overlap with additional noise, unlike measurements performed with digitally controlled active loads. The TBOH02 can be used not only as an active load for power supply measurements but also as a current sink or current source for power supply LED testing and similar applications. It is also convenient for testing in the field where external power sources are not available. The TBOH02 operates from 2V to 70V. The maximum current is up to 10A, but it is important to note that the maximum power without additional cooling is limited to 25W. With a fan accessory that can be clipped to a heat sink, the maximum power rating can be increased to 100W.

• Electronic Load Unit
• Other electronic measuring instruments

The acceleration of digital technology and the increasing complexity of devices have made it more difficult for engineers to isolate abnormalities in devices, as the measured signals have become more complex. For testing tools designed for such applications, a wide dynamic range measurement is necessary to examine very small signals in the presence of relatively large amplitudes. Siglent's new high-resolution oscilloscope, the SDS2000X HD series, is available with bandwidths of 100, 200, and 350 MHz. Equipped with a 2GSa/s, 12-bit ADC front end, it achieves a very low noise floor, allowing for a more accurate understanding of signal details, enabling engineers to measure waveforms more precisely. The vertical resolution of an oscilloscope refers to the ratio of the maximum input signal that the oscilloscope can process to the minimum signal amplitude that can be detected. The higher the resolution, the clearer the details of the waveform become, reducing quantization noise and improving measurement accuracy.

• oscilloscope
• Other electronic measuring instruments

**Main Features** - Combines the functionalities of an oscilloscope, multimeter, and waveform generator into one device. - 3.5-inch high-resolution, high-contrast color LCD display, suitable for outdoor use. - 18650 lithium battery, with a comprehensive power consumption of ≤3W, capable of continuous operation for about 6 hours. - USB Type-C interface, supports power bank, supports PC software connection.

• oscilloscope
• Other electronic measuring instruments

OWON 4 1/2 Digit XDM1000 Series Bench Digital Multimeter ● Equipped with a 3.5-inch (480x320) high-resolution LCD ● 55000 counts, with a maximum accuracy of 0.05% for DC voltage ● Maximum reading rate of 65 times per second ● True RMS AC voltage/current measurement ● Dual-line display ● Trend analysis accessible in chart mode ● SCPI support ● Data recording function allows measurement data to be stored in internal memory and processed by a computer ● Models available for different application scenarios: AC power (XDM1041) and lithium battery (XDM1241)

• Voltage Meter
• Ammeter
• Other electronic measuring instruments

It is a convenient and portable handheld device that integrates the functions of an oscilloscope, recorder, and multimeter. Weighing only 1.7 kg, the battery-operated SHS series can be used for field testing, automotive applications, research and development, and industrial maintenance. It also meets the IP51 dust and water resistance standards, allowing for testing in various harsh environments, and features a fully insulated design up to CATIII 600Vrms. The SHS1000 series handheld oscilloscope is a versatile device that combines the functions of a digital oscilloscope, multimeter, and recorder (including trend and waveform recording) into a single unit. Users can perform measurements on a workbench or in the field, with a battery life of up to 5 hours. The lightweight SHS1000 handheld oscilloscope is equipped with two independent channels, enabling safe simultaneous floating and differential measurements of two signals.

• oscilloscope
• Other electronic measuring instruments

The SIGLENT SHS800X is a convenient and portable handheld device that integrates the functions of an oscilloscope, recorder, and multimeter. Weighing only 1.7 kg, the battery-operated SHS series can be used for field testing, automotive applications, research and development, and industrial maintenance. It also meets the IP51 dust and water resistance standard, allowing for testing in various harsh environments. The SIGLENT SHS800 series handheld oscilloscope is a versatile device that combines the functions of a digital oscilloscope, multimeter, and recorder (including trend and waveform recording) into a single unit. Users can perform measurements on a workbench or in the field, with a battery life of up to 5 hours.

• oscilloscope
• Other electronic measuring instruments

The "Multi Water Environment Measuring Device Water Quality Measuring Equipment Water Sensor ODEON" is an ultra-compact multi water environment measuring device with a backlit 4-inch large screen. Developed for field use, it boasts excellent waterproofing. It can connect up to 2 of the 7 types of digital sensors available, allowing for measurements of pH/ORP/T°C + dielectric constant, pH/ORP/T°C + oxygen, oxygen + turbidity, pH/ORP/T°C + oxygen, suspended solids + oxygen, and more. Additionally, when connected to the "PHOTOPOD," it transforms into an "ultra-compact photometer"! It analyzes over 40 parameters (NH4+, NO3-, PO4 3-, DCO, CI2, Fe, Zn, etc.).

• Environmental Test Equipment
• Water quality testing
• Other environmental analysis equipment

The "Multi Water Environment Measurement Device Water Quality Measurement Equipment Water Sensor ODEON" can connect up to 2 sensors (ODEON Open X) from 7 types of digital sensors, enabling measurements such as pH/ORP/T°C + dielectric constant, pH/ORP/T°C + oxygen, oxygen + turbidity, pH/ORP/T°C + oxygen, suspended solids + oxygen, and more. When the "PHOTOPOD" is connected to the ODEON, it becomes an "Ultra-Compact Photometer" that analyzes over 40 parameters (NH4+, NO3-, PO4 3-, DCO, CI2, Fe, Zn, etc.). ODEON is a versatile water environment measurement device.

• Environmental Test Equipment
• Water quality testing
• probe

Today, millimeter wave and terahertz technologies are widely used in the fields of radar, electronic interference, electronic reconnaissance, precision guidance, communications, inter-satellite communications, and other military electronic equipment. In the civilian sector, millimeter wave and terahertz technologies are applied in areas such as automotive collision avoidance radar, remote sensing, astronomical observation, and 6G communication systems. The development and utilization of millimeter wave and terahertz technologies are based on solving the challenges of testing and measurement in the millimeter wave and terahertz bands. The millimeter wave and terahertz test systems developed and manufactured by Ceyear achieve high performance in many areas, including vector network analysis, signal generation, spectral analysis, power measurement, antenna testing, radar cross-section (RCS) testing, and material electromagnetic parameter testing.

• Time-frequency measurements
• Signal Generator
• Other electronic measuring instruments

1. The LCR test parameters have been changed from the original two parameters to a display of four parameters, combining LCR measurement display and sorting display. 2. The LCR test incorporates the settings for nominal values and reference values, making it easier for customers to understand and use. Cancel the auxiliary file and cancel the secondary parameter file. 3. The frequency, level, offset, function, and delay of each point in the list scan can be individually set to meet the needs of most customers. 4. LCR curve scan split screen display. 5. Convenient operation and intuitive display. Handler setting interface. In the transformer scan handler sort mode setting, it can provide up to 30 sorted signal outputs. 6. When setting pins in the past, it is necessary to enter different subpages when pins need to be connected in series and parallel. 7. The setting of test conditions for the compressor is more concise and convenient. For the related parameters of Lx, it is necessary to enter 6 to 7 different subpages.

• Analytical Equipment and Devices
• Other electronic measuring instruments

The TH2851 series impedance analyzer completely surpasses the 120MHz frequency bottleneck of similar devices from other companies and resolves the defect of being able to analyze only without the ability to test individually. The two interfaces for testing and analysis make testing easier. Thanks to advanced automatic balance bridge technology, it guarantees a basic accuracy of 0.08% over a frequency range of 10Hz to 130MHz. With a fast testing speed of 5ms and an impedance testing range of 1GΩ, it can meet the measurement requirements for components and materials. This is particularly useful for measuring low-loss (D) capacitors and high-quality factor (Q) inductors. The 4-terminal pair port configuration can effectively eliminate the effects of electromagnetic coupling in the test lines, and the lower limit of the low impedance testing capability has been extended to ten times lower compared to conventional 5-terminal configuration devices.

• Analytical Equipment and Devices
• Other electronic measuring instruments

The 1465-V series signal generator exhibits excellent vector modulation performance across a frequency range of 100 kHz to 67 GHz. It features an internal modulation bandwidth of 200 MHz and an external modulation real-time bandwidth of 2 GHz, capable of meeting various modulation needs for wideband signals. The generator is equipped with outstanding spectral purity and output power specifications. Phase noise at a 10 GHz carrier with a 10 kHz frequency offset can reach -126 dBc/Hz, addressing high-level testing needs with stringent signal testing requirements. The generator also boasts excellent vector modulation accuracy, with EVM being less than 1.4% (4 Msps) across the entire frequency range, making it suitable for measurement purposes. The baseband signal generator can be easily configured for flexible performance and supports over 20 common modulation formats, including PSK, QAM, FSK, and ASK.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Signal Generator

The 1465 series signal generator, with a frequency range of 100 kHz to 67 GHz, features a high-purity spectrum and high output power. The phase noise of the single sideband at a 10 GHz carrier and a 10 kHz frequency offset is -126 dBc/Hz. The maximum output power reaches up to 1 W at a 20 GHz carrier, and the dynamic range of output power is 150 dB. All these specifications can meet the high-end requirements for electromagnetic signal testing. Furthermore, the 1465 signal generator is equipped with high-precision analog sweeping and high-performance analog and pulse modulation capabilities, featuring a maximum bandwidth of the internal modulation signal generator of up to 10 MHz, various signal waveforms, a minimum pulse width of 20 ns, and flexible pulse trains, fulfilling the testing requirements for analog and pulse modulation. It is equipped with a 10.1-inch display screen with a resolution of 1280×800 and numerous independent operating styles such as buttons, mouse, and touchscreen, enhancing user experience and testing efficiency. The 1465 signal generator can generate high-quality continuous wave or modulated signals.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Signal Generator

Based on innovative technology, the 1435 series signal generator achieves a balance in terms of performance, cost-effectiveness, and size-weight. It also features excellent spectral purity with single sideband (SSB) phase noise of -136 dBc/Hz (for a carrier at 1 GHz with a frequency offset of 10 kHz) or -116 dBc/Hz (for a carrier at 10 GHz with a frequency offset of 10 kHz). It provides high output power of up to 20 dBm @ 20 GHz and a dynamic range of over 150 dB. The response is fast, switching to another frequency in just 1 ms, which shortens test time, improves testing efficiency, and meets the needs of large-scale data testing. Additionally, it is equipped with excellent analog modulation and pulse modulation capabilities. By adopting advanced frequency synthesizer and RF channel signal processing technology, it achieves high performance while reducing costs. It also features a 7-inch high-sensitivity LED touch screen that supports operations via touch screen, panel buttons, rotary knobs, external mouse, and keyboard, greatly enhancing the user experience.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Signal Generator

Based on innovative technology, the 1435-V series signal generator achieves a balance in terms of performance, cost-effectiveness, and size-weight. It supports arbitrary modulation of waveform data downloaded in five formats, allowing users to edit, download, and configure waveforms as needed to complete various signal simulations and meet diverse testing requirements for complex signals. Its baseband signal generator is easy to set up and offers excellent performance. It supports real-time generation of common digital modulation signals in over 20 formats, including PSK, QAM, FSK, and MSK. Additionally, it features excellent spectral purity with phase noise of -136 dBc/Hz (for a carrier at 1 GHz with a frequency offset of 10 kHz) or -120 dBc/Hz (for a carrier at 6 GHz with a frequency offset of 10 kHz). It provides high output power with a maximum output power of up to 22 dBm @ 3 GHz and an output power dynamic range exceeding 150 dB.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Signal Generator

The millimeter wave source module 82406 series is advanced in terms of output power and application convenience. This series source module can be used to build a millimeter wave signal generation system in conjunction with a microwave signal generator. The output frequency and power are controlled by the synthesized signal source. A special power adapter provides DC drive to the module.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

The 1441 series signal generator is an economical signal generator designed with a frequency range as low as 9 kHz and a portable case structure, making it compact and easy to operate. The 1441 series features a wide dynamic range output, and the standard internal modulation signal generator supports amplitude modulation (AM), frequency modulation (FM), and pulse modulation (PM). List sweep and step sweep functionalities provide greater flexibility for testing applications. It includes a Chinese and English operating interface, as well as a large LED TFT LCD. The 1441 series can be used for performance testing of radar receivers and locating fault points, as well as for electronic warfare and communication equipment for convenient testing. It can also serve as a local oscillator for test equipment such as transmitters and receivers. In the civilian market, this series is suitable for research and development and manufacturing of household appliances. Additionally, the economical RF signal generator is very suitable for education and experiments in universities. The portable design of the case makes it very suitable for outdoor operation.

• EMC Testing
• Signal Generator

The 4051 series signal/spectrum analyzers demonstrate excellent performance in dynamic range, phase noise, amplitude accuracy, and measurement speed. The 4051 series includes high-sensitivity spectrum analyzers, standard power measurement components, IQ analyzers, vector signal analyzers, real-time spectrum analyzers, transient analyzers, pulse signal analyzers, audio analyzers, analog demodulation measurements, phase noise measurements, and noise figure measurements, providing reliable high-performance measurement services. The 4051 series has excellent expandability. By flexibly configuring various options, performance can be further enhanced. Through various digital and analog signal output interfaces, the spectrum analyzer can be used to establish measurement systems or for secondary development. It can be widely used in fields such as aviation, aerospace, radar detection, communications, electronic countermeasures, and navigation for the measurement of signals and equipment.

• EMC Testing
• Analytical Equipment and Devices
• Other electronic measuring instruments

The 4051-S series signal/spectrum analyzer supports unparalleled spectral measurement services at a high price-performance ratio. The analyzer features excellent dynamic range, phase noise, amplitude accuracy, and measurement speed, offering a total of 10 measurement functions, including high-performance spectrum analysis and standard power measurement modules compliant with relevant standards. The analyzer's capabilities can be significantly enhanced. Multiple practical options are available, such as preamplifiers, phase noise measurement, and random IF output. The 4051-S series can be widely applied to the testing of signals and equipment related to aerospace, communications, EMC, radar detection, navigation, and other fields.

• EMC Testing
• Analytical Equipment and Devices
• Other electronic measuring instruments

The 4024D / E / F / G spectrum analyzer has many advantages, including a wide frequency range, high performance, fast sweep speed, various functions, and easy operation. In terms of performance specifications, it offers excellent display resolution, low phase noise, and fast sweep speed. Regarding measurement functions, it provides a rich set of measurement capabilities, including spectrum analyzer, interference analyzer, AM/FM/PM analyzer, power meter, channel scanner, and intelligent measurement functions for channel power, occupied bandwidth, adjacent channel power ratio, tune & listen, emission mask, and carrier-to-noise ratio. The 4024 features an integrated design with an 8.4-inch LCD and capacitive touchscreen, making display definition and operation convenient. This series is handheld, compact, lightweight, and equipped with flexible power options, making it very suitable for fieldwork. The 4024 can be used for testing signals and equipment in the fields of aerospace, microwave and satellite communications, radio communications, radar surveillance, electronic countermeasures and reconnaissance, and precision guidance.

• EMC Testing
• Other electronic measuring instruments
• Analytical Equipment and Devices

It adopts a compact portable box structure that is small, lightweight, low power consumption, and convenient for carrying. Utilizing miniaturized integrated design technology for wideband millimeter-wave receivers, all-phase synchronization technology based on wideband VCO, full digital intermediate frequency design technology, and microwave composite multilayer circuit board design technology, it achieves high-performance indicators and ensures the economic efficiency of the product. The 4041 series consists of four models. With a preamplifier equipped across the entire product spectrum, very high reception sensitivity can be obtained at any frequency point. Furthermore, the integrated design of a 12.1-inch high-brightness LCD and a capacitive touchscreen, along with a combination design of large buttons and virtual buttons, enhances operational convenience. As for performance indicators, it features excellent average noise level and phase noise indicators, as well as high-speed scanning. The measurement functions include optional modes such as interference analyzer channel scanner, AM/FM/PM analyzer, power meter, and various measurement functions such as channel power, occupied bandwidth, adjacent channel power, audio demodulation, emission mask, and carrier-to-noise ratio.

• EMC Testing
• Other electronic measuring instruments
• Analytical Equipment and Devices

The overall size of the handheld monitoring receiver is 182.5mm × 289mm × 69mm, and the total weight of the machine is less than 3.5kg. The operating time on battery is 3 to 4 hours, and the display is a 10.1-inch TFT with an integrated touch screen. It is equipped with multiple functions such as searching, intercepting, measuring, analyzing, demodulating, direction finding, and positioning of radio signals, and can be used for radiation monitoring, coverage measurement, rapid detection and positioning of illegal radiation sources/interference sources, as well as performing key activities in compliance with ITU specifications for radio security and other tasks. The entire machine adopts a full touch screen design, and the software supports multi-touch interactive mode. The touch operation experience of a smartphone has been fully transplanted to the monitoring receiver. Users can easily complete operations such as zooming in and out of display tracks, moving windows, and setting parameters using touch gestures. It provides a user-friendly UI interface to ensure that users can operate the monitoring receiver just like using a mobile phone or tablet computer.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

The 82407 Spectrum Analyzer Frequency Extension Module Series is primarily designed for millimeter-wave frequency extension for spectral analysis. This series can be used as the front end of a millimeter-wave signal receiver. The 82407 series adopts a standard waveguide interface corresponding to its frequency range as the input interface. The LO input uses a 2.4mm female coaxial connector, and the IF output uses a 3.5mm female coaxial connector.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

The 3672 series vector network analyzers include the 3672A, 3672B, 3672C, 3672D, and 3672E. The 3672 analyzers offer multiple calibration types, including frequency response, single port, response separation, extended response, full dual port, and electronic calibration, providing various display formats such as logarithmic amplitude, linear amplitude, standing wave, phase, group delay, Smith charts, and polar coordinates. They are designed with several standard interfaces such as USB, LAN, GPIB, and VGA. In addition to all the measurement functions of traditional vector network analyzers, the 3672 analyzers, with configurable functional options, enable accurate measurements of amplitude frequency characteristics, phase frequency characteristics, and group delay in fields such as transmission/reception (T/R) module measurements, dielectric property measurements, microwave pulse property measurements, and optoelectronic property measurements. They also allow for multifunctional and comprehensive parameter testing of mixers/converters, two-dimensional sweeps of gain compression, and pulse S-parameters. These analyzers are essential equipment for scientific research and manufacturing processes in radar, communication, and navigation systems.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

The 3672-S series maintains the same important technical specifications as the 3672 series, such as sweep speed and dynamic range, while reducing costs and improving price-performance ratio. The 3672-S series offers multiple calibration types, including frequency response, single port, response separation, enhanced response, full dual port, and E-cal. It incorporates multiple display types such as logarithmic amplitude, linear amplitude, standing wave, phase, group delay, Smith chart, and polar coordinates. Many standard interfaces are available, including USB, LAN, GPIB, and VGA. These can accurately measure characteristics such as amplitude frequency, phase frequency, and group delay.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

The 3656A / B / D vector network analyzer can be applied in fields such as wireless communication, cable TV, education, and automotive electronics. It can be used for performance measurement of RF components such as filters, amplifiers, antennas, cables, and cable TV subconnectors. It adopts the Windows operating system and is equipped with features for error calibration, time domain, and fixture simulation. It supports multiple display formats including logarithmic amplitude, linear amplitude, standing wave, phase, group delay, Smith chart, and polar coordinates. It offers multiple calibration types such as frequency response, single port, response separation, extended response, full dual port, fast SOLT calibration, and electrical calibration. Multi-channel and multi-window display capabilities are available. It is designed with USB interface, LAN interface, GPIB interface, and VGA interface. With efficient and powerful error correction capabilities, it can quickly and accurately measure the amplitude, phase, and group delay characteristics of DUT S-parameters.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

By adopting advanced technologies such as hybrid integrated design of RF circuits and digital circuits, broadband fundamental wave mixing, digital IF processing, and intelligent power management, the 3680A/B Cable & Antenna Analyzer offers advantages of high speed, high precision, compactness, lightweight, battery operation, touch screen operation, and automatic adjustment of backlight brightness. In addition to testing VSWR, reflection loss, characteristic impedance, and phase, it can also accurately identify fault points. The 3680A/B Cable & Antenna Analyzer is developed for on-site testing, primarily for trunking, GSM, PCS/DCS, CDMA, GPRS, WCDMA, CDMA2000, TD-SCDMA, LTE, and paging systems. During the installation, calibration, and regular maintenance of cable and antenna systems, the Cable & Antenna Analyzer helps users quickly estimate the status of transmission lines and antenna systems, improve the maintenance efficiency of operational base stations, and accelerate the installation and calibration of new base stations.

• Other electronic measuring instruments
• Analytical Equipment and Devices
• Optical Measuring Instruments

The 3644A / 45A / 43Q / 49 / 49A / 49B millimeter wave VNA extender module has reached an international level in measurement speed, dynamic range, and measurement stability. In terms of hardware, it adopts new design concepts and technological solutions, significantly enhancing the key performance indicators of the equipment. The 3644A / 45A / 43Q / 49 / 49A / 49B millimeter wave VNA extender, 3640A millimeter wave frequency extension controller, and vector network analyzer together form a millimeter wave vector network analysis system, achieving flexible configurations of 5mm, 3mm, 2mm, and 1mm. The maximum frequency range reaches up to 500GHz. With advantages such as concise system configuration, user-friendly interface, and high testing accuracy, it enables complete S-parameter measurements of the millimeter wave networks under test. This system is widely used in research and development, manufacturing, and testing in the fields of millimeter wave components, MMICs, antennas, RCS, and materials.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments

The 3671 series vector network analyzers include the 3671C, 3671D, and 3671E. The 3671 series network analyzers provide frequency response, single-port, response separation, extended response, full dual-port, electronic calibration, and more. They offer various display formats such as logarithmic amplitude, linear amplitude, phase, group delay, Smith chart, and polar coordinates. They are designed with several standard interfaces including USB, LAN, GPIB, VGA, and HDMI. They can accurately measure the amplitude frequency characteristics, phase frequency characteristics, and group delay characteristics of microwave networks. The 3671 series vector network analyzers retain the functionalities of high-end vector network analyzers, such as performance indicators, equipment appearance, display effects, and software interfaces, while controlling the volume, weight, wind noise, and other aspects of the equipment. Therefore, this product is widely used in fields such as radar, communications, and navigation, which are essential testing devices in the defense industry and scientific research at universities.

• Other measurement, recording and measuring instruments
• Other electronic measuring instruments
• Analytical Equipment and Devices

The 3986 series noise figure analyzers include the 3986A, 3986D, 3986E, 3986F, and 3986H. Features of this product include a wide frequency range, high sensitivity reception, an easy-to-use user interface, dual-channel HD display, various external interfaces, and dual noise source drives. It supports automatic measurement of noise figures for amplifiers, upconverters, downconverters, and multi-stage frequency receiving links. The guide interface is intuitive for setting measurement modes. The comprehensive loss compensation feature can compensate for losses occurring in channels before and after measurements using fixed format or Excel format. The internal noise figure measurement uncertainty calculator performs quantitative analysis of the uncertainty in noise figure measurements. The limit line function, which provides pass/fail notifications for tests, simplifies the decision-making process for pass/fail tests. User-friendly features make it easy for engineering technicians to correctly set measurement values and observe and save measurement results in various formats.

• Other electronic measuring instruments
• Analytical Equipment and Devices
• Other measurement, recording and measuring instruments

The 5G next-generation communication networks and autonomous driving technology in the automotive field, which are being developed for practical use and commercialization in 2020, require measurement technology for onboard millimeter-wave and sub-millimeter-wave radar. SAF's Spectrum Compact series covers a wide frequency range from 300 MHz to 87 GHz with eight models. Customers can choose the most cost-effective model that best fits their applications. The device will satisfy even in serious research and development with standalone measurements in the field, as well as through standard PC analysis software. It is an essential tool for antenna alignment and testing, and is the top choice for LoS verification applications. This device is ideal for analysis and measurement applications of various microwave systems. It features an interactive GUI with intuitive controls and an instant on/off function, along with a resistive touch screen.

• Signal Generator

A noise source is a device that can generate a random continuous spectrum signal. A properly functioning noise source must have stable output noise power and a uniform power spectral density within the specified frequency band. We offer various solid-state coaxial noise sources in the frequency range of 10 MHz to 50 GHz. This includes the Smart Series and Standard Series, which have the advantage of a wide frequency range. They exhibit low output voltage standing wave ratio (VSWR) and excellent flatness of output excess noise ratio, among other features. The Smart Noise Source employs I2C bus technology to enable automatic downloads and improve measurement speed. Equipped with a digital temperature sensor, it allows the host to automatically monitor changes in ambient temperature, correcting the temperature for noise figure measurements and enhancing measurement accuracy. The standard noise source requires a pulse voltage drive of +28V. Together with a solid-state noise source and a noise figure analyzer, we provide a complete solution for measuring noise figures at microwave and millimeter-wave frequencies.

• EMC Testing
• Other electronic measuring instruments
• Testing Equipment and Devices

The 2438 series microwave power meter consists of a microwave power meter host and a series of microwave power sensors. With a newly designed wideband diode detector, it incorporates digital signal processing technology and multidimensional calibration compensation technology, enabling the device to have a wide frequency range, broad dynamic range, high precision, fast measurement and analysis, and serialization of sensors. It is primarily used for measuring and calibrating the average power, peak power, and pulse envelope power of microwave signals. It is an essential measuring instrument for research and development, manufacturing, acceptance, and maintenance in fields such as radar, electronic countermeasures, and communications.

• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

The 87230/87231/87232/87233 USB power sensor is a diode-based power sensor equipped with a USB 2.0 full/high-speed self-adaptive interface. It incorporates high-performance digital processing chips and various calibration and correction technologies to achieve a wide frequency range and broad dynamic range. Power measurements and dynamic range can be established by connecting to computers and other electronic measuring instruments to create a power testing system. In particular, it can be used for field tests, production line tests, and other low-cost power testing.

• Other electronic measuring instruments
• Analytical Equipment and Devices
• Other measurement, recording and measuring instruments

The 3871 series broadband solid-state amplifier series operates from 9 kHz to 110 GHz and is provided in a 4U 19-inch rack mount chassis according to the IEC60297-3-100.2008 standard. Designed with a wide bandwidth, high gain and power, broad dynamic range, low spurious signals, and very high load resistance, the amplifier can be used as suitable test equipment covering multiple frequency bands. This makes it suitable not only for applications such as electronic counter measurements, antenna testing, laboratory instrumentation, and electromagnetic compatibility/electromagnetic interference testing, but also for narrowband applications like radar, microwave imaging, and satellite communications. The 3871 series amplifier features a patented spatial power combine. The amplifier operates on 100-220 VAC and is suitable for both rack-mounted applications such as testing and measurement and benchtop use. The RF input and output are matched to 50Ω. Driver amplification, bias, and gain control are integrated.

• EMC Testing
• others

The 4957D / E / F microwave analyzer has a frequency range of up to 18 GHz / 26.5 GHz / 40 GHz and provides users with powerful and comprehensive analysis capabilities through dual-port vector network analysis, cable and antenna analysis, vector voltage measurement, spectrum analysis (channel power, adjacent channel power, occupied bandwidth, interference analysis, and frequency counting), electric field strength measurement, and power measurement. The dual-port vector network analysis features fast and accurate measurement capabilities for RF network parameters, offering logarithmic, linearity, phase, group delay, impedance circle diagrams, polar coordinates, standing wave ratio, and other display formats, as well as time domain measurement options. In cable and antenna analysis, it can measure standing wave ratio, reflection loss, impedance, cable loss, and other parameters of microwave networks such as antennas, transmission lines, and cables. Additionally, the distance-to-fault (DTF) feature allows for easy measurement of discontinuities in the impedance of cable antenna feeders and cables.

• Other electronic measuring instruments
• Analytical Equipment and Devices
• Other measurement, recording and measuring instruments

The 5256C 5G communication terminal integrated tester is primarily used for research and development, manufacturing, calibration, testing, certification, maintenance, and education in the field of 5G terminals and baseband chips. It is equipped with 5G signal generation capabilities, 5G signal power characteristics, demodulation characteristics, and spectral characteristic analysis functions, supporting high-speed testing on 5G terminal production lines. It can transmit downlink 5G NR signals to achieve receiver testing for 5G terminals. Additionally, it supports 3GPP TS38 521 Release 15 version, sub-6GHz, and multi-domain parallel synchronization testing, analyzing 5G terminal signals from the perspective of angles and dimensions of perspective. The tester meets various testing requirements through a variety of optional configurations, such as terminal RF compliance testing using the 3GPP TS38 521-1 protocol standard, and can also support RF compliance testing for 4G/3G/2G and Wi-Fi terminals through software upgrades.

• Other electronic measuring instruments
• Other measurement, recording and measuring instruments
• Optical Measuring Instruments