ウェーブクレスト List of Products and Services

**Product Overview** The TBL5032-3 is a line impedance stabilization network that measures conducted interference in the range of 9 kHz to 30 MHz, in accordance with the CISPR 16-1-2 standard. This device is designed to test three-phase and single-phase AC power supplies with a maximum supply voltage of 450V/260V and 32A. Conducted noise can be measured on each phase and the neutral line. The TBL5032-3 features individual RF outputs for each phase and neutral, allowing it to be combined with the TBLM1 to separate emissions into common mode components and differential mode components. While the TBL5032-3 does not have an integrated high-pass filter for the RF output, it comes with an external 9 kHz coaxial high-pass filter. The single-phase DUT socket is available in country-specific variations.

• EMC Testing
• Testing Equipment and Devices
• Optical Measuring Instruments

Compliant with the latest EMI/EMC standards.

• Time-frequency measurements
• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

● 3-in-1 field meter: spectrum analysis (DC to 10MHz), wideband (DC to 90GHz), electrostatic field measurement ● Real-time FFT-based spectrum analysis through digital processing ● Weighted peak measurement (WPM) for automatic and real-time comparison with limit values ● Auto-gain function dedicated to peak detection ● Display results in RMS and peak values ● Time domain measurement function for specific frequencies ● Automatic field probe recognition ● Selection of E&H fields ● Total field value and values for each component (X, Y, Z) ● Frequency span selection ● High-pass filters at 1Hz, 10Hz, 25Hz, 100Hz ● Max hold function ● Display of maximum, minimum, and average values ● Measurement time adjustable from 1 second to 100 hours ● Programmable measurement starting at a specified time ● Graph display of wideband measurements changes over time ● Graph display adjustable from 1 second to 12 minutes ● Programmable alarm function ● Real-time digital output for external measurements ● USB-C and fiber optic connection ● Screenshot function for reporting ● PC software for control and reporting ● Multilingual support

• Other electronic measuring instruments
• EMC Testing
• Environmental Test Equipment

The EMC compliance software EMCview is an easy-to-use EMC pre-compliance test for radiated and conducted emissions. It fully complements automated testing using our LISN, RF current probes, measurement antennas, and TEM cells. With built-in amplitude correction, it enables correction factors and conversion factors for cables, amplifiers, attenuators, LISNs, TEM cells, antennas, RF current probes, filters, and other components within the signal chain. There is no need for time-consuming setup. The software will be ready for measurements immediately after installation. All emission-related standards and several automotive manufacturer standards are pre-configured in the corresponding project files. The project files handle all the settings necessary to perform measurements in compliance with the standards. In addition to using pre-configured projects, users can easily create their own projects using the built-in editor or a simple text editor.

• EMC Testing
• Other electronic measuring instruments

The TH2832X series features three models. Measurement frequency: 20Hz to 200kHz, high precision.

• LCR Meter
• Time-frequency measurements
• Other electronic measuring instruments

Built-in bias power supply of 0-100mA/0-10V, maximum test speed of 75 times per second, improved DCR test function, basic accuracy of 0.05%.

• LCR Meter
• Time-frequency measurements
• Other electronic measuring instruments

The TH2638 series is a new precision capacitance meter equipped with higher test frequencies. Its compact and portable design makes it convenient for use on shelves. With a basic accuracy of ±0.07%, a loss accuracy of 0.0005, a maximum test frequency of 1MHz, a 4.3-inch LCD screen, and selectable Chinese and English operating interfaces, the TH2638 series is easy to operate and provides fast and reliable testing for the manufacturing of ceramic capacitors. It can test all types of capacitors from low to high values. The results of testing a single capacitor multiple times are very stable and accurate, even for capacitors with small values. The tester is compatible with the SCPI command set and consists of a manipulator and scanner interface, with the scanner interface capable of scanning open/short/load error calibration for each channel of up to 256 channels. At low frequencies, there is a signal level correction function. When the impedance is very low, the internal resistance of the signal source and test cables can cause the voltage at the DUT terminals to be lower than the set range. This function adjusts the level to the set range.

• Voltage Meter
• LCR Meter
• Power meter

The TH2689/TH2689A is a rapid and accurate capacitance leakage current insulation resistance tester. With a maximum testing speed of 18 tests per second, excellent performance, and a reasonable price, it offers the best choice for users. The TH2689/TH2689A provides a maximum test voltage of 800V/500V and a charging current of 0.5mA to 500.0mA (with a maximum power limit of 50W for voltages over 100V). It is primarily used for capacitance leakage current, insulation resistance, and pressure testing of aluminum electrolytic capacitor anode foil. It can also be applied to the verification and leakage current testing of devices such as extinguishers, Zener diodes, and neon tubes. It features a standard handler interface for achieving sorting effects and stable, rapid testing. A standard RS 232 interface, optional GPIB interface, and common RS232 software are provided to meet the requirements for connecting to a computer and forming an automatic testing system. This device can receive SCPI commands to ensure compatibility with communication software.

• Voltage Meter
• LCR Meter
• Power meter

This device adopts a new generation of AC/DC superposition test theory, adapting to high precision and high frequency testing requirements. The high-performance built-in embedded MCU can quickly respond to the status or malfunction of the host and slave machines, providing real-time display. This helps improve work efficiency. The newly designed user-friendly graphical operating interface includes five foot control modes and full touch operation, offering convenience and efficiency to users. The new file management system allows for easy, quick, and accurate operations, capable of storing 99 groups of real-time setting files and user-defined setting files. It can provide push information display and cache 2 real-time information. With a two-mode SCPI command system, it is convenient for production line setup and unit testing. It can also connect with any device equipped with a serial port, referring to the SCPI command system design of this machine.

• Other electronic measuring instruments
• Other power sources
• Ammeter

The loop antenna TBMA6-P is designed for measuring radiated emissions in the frequency range of 9 kHz to 30 MHz in accordance with CISPR 16. The diameter of the loop is 60 cm, providing sufficient sensitivity to perform all relevant measurements specified in the corresponding CISPR standards for the frequency range of 9 kHz to 30 MHz. The loop is constructed from coaxial cable and is attached to the transducer with an N connector. This design allows for flexible use with various loop diameters. An attachment with a ¼-inch screw allows it to be connected to a standard tripod.

• Time-frequency measurements
• Other electronic measuring instruments
• Other measurement, recording and measuring instruments

Programmable DC Electronic Load Module Design TH8300 Series Input Power: Maximum 500W Input Voltage: Maximum 600V Input Current: Maximum 80A Dynamic Frequency: Maximum 50kHz Sampling Rate: Maximum 500kHz Module Design

• Electronic Load Unit

TH8400 Series Input Power: Maximum 350W Input Voltage: Maximum 500V Input Current: Maximum 60A Dynamic Frequency: Maximum 25kHz Sampling Rate: Maximum 500kHz

• Electronic Load Unit

【Product Overview】 The Shielded Tent TBST-86/49/45/2-B is designed to suppress interference from ambient noise during pre-EMC compliance measurements. With dimensions of 86cm x 49cm x 45cm, it is compatible with TBTC0 / 1/2 and all LISNs. The shielded tent is composed of two layers of conductive fabric and is supported by a rigid aluminum profile. The side filter panel includes a 240V / 10A AC filter, two 240V / 10A DC filters, and four coaxial feed-through adapters with screw caps. The access opening is sealed with conductive Velcro tape.

• EMC Testing

【Product Overview】 The TBST-200/100/100 shielded tent is designed to suppress interference from ambient noise when performing pre-compliance EMC measurements. The dimensions of the TBST-200/100/100 are 200cm x 100cm x 100cm. The tent can accommodate Tekbox pre-compliance test equipment such as LISN and TEM cells. The shielded tent consists of two layers of conductive fabric and is supported by a rigid aluminum profile. The side filter panel includes a 240V / 10A main AC filter, two general-purpose 240V / 10A AC / DC filters, and four coaxial feed-through adapters with screw caps. The access opening is sealed with conductive Velcro tape.

• EMC Testing

【Product Overview】 The Shielded Tent TBST-120/60/60/2-B is designed to suppress interference from ambient noise during pre-compliance EMC measurements. With dimensions of 120cm x 60cm x 60cm, it can accommodate Tekbox pre-compliance test equipment such as LISN and TEM cells. The shielded tent is made of two layers of conductive fabric and is supported by a rigid aluminum profile. The side filter panels include a 240V / 10A AC filter, two 240V / 10A DC filters, and four coaxial feed-through adapters with screw caps. The access openings are sealed with conductive Velcro tape.

• EMC Testing

To achieve the desired measurements, various adjustments may be necessary. In particular, it is essential to position the oscilloscope probes, near-field magnetic and electric field probes of the spectrum analyzer, and antennas in the correct direction and at the appropriate locations. To facilitate this, the universal probe holder eoPoD provides an optimal solution regardless of environmental conditions. Various applications are explained in the video below.

• oscilloscope
• Time-frequency measurements
• Other electronic measuring instruments

Main Features ● High power 500W (peak) 300W (C.W) ● DC short lightning protection ● Low VSWR ● Uniform gain ● Coupling performance database

• Time-frequency measurements
• Other electronic measuring instruments

The TBMDA5 modulated amplifier provides the power, bandwidth, and modulation necessary for conductive immunity testing using CDN in the frequency range of 150 kHz to 40 MHz. It is designed to be driven by the output of a spectrum analyzer's tracking generator. With a maximum of 2.5 W at the 1 dB compression point in the frequency range of 150 kHz to 40 MHz, it can generate test level Class 1 and Class 2 in accordance with ISO / EN 61000-4-6. The built-in AM modulator allows the tracking generator to be used as a signal source. The TBMDA5 has sufficient gain to achieve maximum output power of 0 dBm provided by the spectrum analyzer tracking generator. In addition to 1 kHz at 80% AM, the TBMDA5 also has modulation capabilities to generate a PM signal at 1 kHz with a 50% duty cycle. In PM mode, to simulate mobile phone TDMA noise, the TBMDA5 can also generate a 217 Hz signal with a 12.5% duty cycle.

• Signal Generator
• EMC Testing
• Other electronic measuring instruments

It is capable of outputting a clean sine wave up to 20GHz. With spectral purity, low phase noise of -120dBc/Hz, and power control, it can be used as a high-frequency LO in many applications such as radar, quantum physics, and RF component verification. Additionally, by combining the SSG5000A as the LO source with the SIGLENT SSG5000X-V vector signal generator as a baseband generator, testing of communication modules is also possible. The SSG5000A is equipped with both frequency sweeping and level sweeping functions, enabling faster testing. It also comes standard with pulse signal generation and can control common third-party USB power sensors to provide power supply that compensates for cable loss.

• Signal Generator

High-speed spectrum analysis from 9 kHz to 13.6 or 26.5 GHz, with a DANL of -165 dBm/Hz and low phase noise of 105 dBc/Hz, consists of two models equipped with a large 12-inch touchscreen, making it ideal for use in communications and the IoT industry. The SSA5000A is also suitable for evaluating RF components and transmitters. With the AMA/DMA option, it enables demodulation and analysis of common analog (AM, FM) and digital (ASK, FSK, PSK, MSK, QAM) signals. It allows for intuitive measurement of EVM and other transmission quality factors, and includes modes for eye diagrams and constellation graphs. Additionally, using the optional real-time mode, it can capture intermittent signals. This feature is built with a maximum analysis bandwidth of 40 MHz to facilitate transmission analysis of common protocols such as Bluetooth and WLAN testing in IoT devices. The optional EMI function enables efficient interference and electromagnetic pre-compliance measurements. Furthermore, due to its scalable platform, upgrades to bandwidth and functionality are possible even after purchase.

• Time-frequency measurements
• Other electronic measuring instruments
• EMC Testing

The world's first and only 8GHz USB spectrum analyzer with dual USB true I/Q streaming featuring an instantaneous bandwidth of up to 245MHz (complex I/Q). It can capture very short signals with a very small POI (probability of interception) of up to 10 ns. Additionally, the SPECTRAN V6 X integrates a vector signal generator/tracking generator with a modulation bandwidth of up to 245 MHz. With a sweep speed exceeding 1THz/s, it sets a new standard for the USB compact class. You can cascade any number of devices to achieve even higher real-time bandwidth. Therefore, just using four SPECTRAN V6 X units already achieves a real-time bandwidth of 1GHz. The included software RTSA-Suite PRO is precisely tuned to match the powerful and robust hardware and supports the use of multiple SPECTRAN V6 X units. The stackable aluminum housing facilitates the parallel use of multiple units.

• Other electronic measuring instruments
• Time-frequency measurements
• Signal Generator

**Main Features** - DC 150 V / 30 A, maximum total power 300 W / 200 W - Adjustable current rise/fall rate from 0.001 A/μs to 2.5 A/μs - Four static/dynamic modes: CC / CV / CP / CR - Readback resolution of 0.1 mV, 0.1 mA - Excellent dynamic characteristics, capable of simulating fast current changes - Supports 100-step list testing - Supports 50-step automatic programming testing - Battery testing function - CR-LED testing function

• Electronic Load Unit
• Other electronic measuring instruments

【Main Features】 ● Uniform Gain ● Waveguide Flange UBR ● Aluminum Alloy ● Coupling Performance Database ● Stainless Steel 2.92mm - Female ● Waterproof Structure ● PTZ Control Function ● Tripod or Antenna Mounting Design ● Customizable Colors

• Time-frequency measurements
• Other electronic measuring instruments

The precision sleeve dipole is a non-directional antenna with a low VSWR and an electrical dipole pattern similar to a half-wavelength resonant dipole. Thanks to the sleeve dipole design, which eliminates the interaction between the cable and the feed point that can degrade antenna performance and reduce cable interaction, it can be end-fed. The sleeve dipole antenna features a nominal impedance of 50 ohms, a maximum continuous transmission power of 1 watt, and an SMA female connector (with an optional N female connector). Please contact us for more details. Values for gain, VSWR, maximum ripple, and measurement uncertainty are provided with each calibration.

• Time-frequency measurements
• Other electronic measuring instruments

The logarithmic periodic antenna, known as LPDA, is a broadband directional antenna that provides a combination of gain and directivity over a wide range of frequencies. Both the logarithmic periodic antenna and the Yagi antenna are high-gain directional antennas. The main difference between these antennas is that the logarithmic periodic antenna supports a wider frequency bandwidth and is physically much larger than the Yagi antenna. The typical VSWR of a logarithmic periodic dipole array is 2:1, operating over a wider bandwidth and having lower gain for an equivalent number of elements. While the logarithmic periodic antenna is much larger than a Yagi antenna with equivalent gain, this level of performance makes it ideal for many applications.

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ●High power 300W (peak) 150W (C.W) ●DC short lightning protection ●Low VSWR ●Uniform gain ●Linked performance database

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ■ 4.3 inch LCD color display, menu in Chinese and English ■ 6 1/2 digit reading up to 1,199,999 ■ Test speed up to 1000 / s ■ Compact and easy to place on a shelf ■ Displays histogram, bar graph, and trend chart ■ AC low frequency signals can be tested up to 3Hz ■ Capacitance testing function ■ Maximum diode test voltage of 5V ■ Can store up to 10,000 data entries

• Other measurement, recording and measuring instruments
• Time-frequency measurements

【Features】 ● DC short lightning protection ● Low VSWR ● Uniform gain ● Connection performance database

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ● DC short lightning protection ● Low VSWR ● Uniform gain ● Coupling performance database ● Electrical specifications

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ● DC short lightning protection ● Low VSWR ● Uniform gain ● Coupling performance database ● Double ridge horn antenna 18GHz to 40GHz ● 6061 aluminum alloy ● Stainless steel 2.92mm female

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ● High power 100W (peak) ● DC short lightning protection ● Low VSWR ● Uniform gain ● Linked performance database

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ●Uniform gain ●Aluminum alloy ●Connected performance database ●Stainless steel 2.92mm - female ●Waterproof structure ●PTZ control function ●Tripod or antenna mounting design ●Customizable colors

• Time-frequency measurements
• Other electronic measuring instruments

**Features** - High power 500W (CW) - DC short lightning protection - Low VSWR - Uniform gain - Linked performance database - Designed for outdoor use - Dual-ridge broadband waveguide outdoor jamming horn antenna with a frequency range from 400MHz to 8GHz - 6061 aluminum alloy - Stainless steel N-female - Directional

• Time-frequency measurements
• Other electronic measuring instruments

【Features】 ● High power 500W (peak) 300W (continuous) ● DC short lightning protection ● Low VSWR ● Uniform gain ● Coupling performance database ● 700MHz to 6GHz double ridge broadband waveguide horn antenna ● 6061 aluminum alloy ● Stainless steel N-female ● Directional

• Time-frequency measurements
• Other electronic measuring instruments

●Frequency: 26.5GHz to 40GHz ●Waveguide coaxial adapter Model: WC-28-UBR-A1-KF ●Waveguide input Model: WI-28-UBR-20

• Time-frequency measurements
• Other electronic measuring instruments

The Impulse Winding Tester ST-6K is an essential device for testing winding products such as transformers, motors, rotors, stators, electric valves, generators, and all types of coils. It provides an ideal testing method for detecting insulation failures and uses high-speed sampling technology to save the waveforms of standard/master coils and the DUT (Device Under Test) in the measuring instrument. By comparing the waveforms of the master and the DUT, it is easy to identify the parts without issues. Furthermore, it can display the ideal coil waveform as a master and calculate the inductance values of partial discharges, making the ST-6K particularly effective for production and quality control.

• Testing Equipment and Devices
• transformer
• Electrical equipment parts

【Product Overview】 The TBSCP1-5M300 is an RF surface current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe exhibits a very flat response from 5 MHz to 300 MHz and is characterized over a frequency range of 30 kHz to 400 MHz. The TBSCP1-5M300 is designed for RF current monitoring applications that require measurement of RF currents flowing on surfaces such as PCB ground planes or traces, metal planes, or wires. The footprint of the RF current monitoring probe is 40 mm x 15 mm. The transfer impedance is -7 dB ohms, with a typical 3 dB bandwidth from 5 MHz to 300 MHz.

• Other electronic measuring instruments
• EMC Testing

**Product Overview** The TBSCP1-10M500 is an RF surface current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe exhibits a very flat response from 10 MHz to 500 MHz and is characterized over a frequency range of 9 kHz to 600 MHz. The TBSCP1-10M500 is designed for RF current monitoring applications where it is necessary to measure RF currents flowing on surfaces such as PCB ground planes or traces, metal planes, or wires. The footprint of the RF current monitoring probe is 40 mm x 15 mm. The transfer impedance is -5 dB ohms, and the standard 3 dB bandwidth is from 10 MHz to 500 MHz.

• Other electronic measuring instruments
• EMC Testing

【Product Overview】 The TBCCP1-2K70 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe exhibits a very flat response from 2 kHz to 70 MHz and is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-2K80 is designed to be used as a transducer for applications that require measuring RF currents from large loop antennas or coaxial cables. With a transimpedance of 0 dBΩ, it complies with the specifications for large loop antennas (LLA) as per CISPR 15 (EN 555015) and CISPR 16-1-4.

• Other electronic measuring instruments
• EMC Testing

**Product Overview** The TBCCP1-3K100 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance testing equipment. This probe features a 3 dB bandwidth from 3 kHz to 100 MHz and a very flat response from 9 kHz to 30 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-3K100 is primarily designed for use as a converter for active loop antennas or for measuring RF current in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼ inch screw.

• Other electronic measuring instruments
• EMC Testing

**Product Overview** The TBCCP1-400K600 is a coaxial RF current monitoring probe that expands Tekbox's range of affordable EMC pre-compliance test equipment. This probe features a 3 dB bandwidth from 400 kHz to 600 MHz and a very flat response from 1 MHz to 200 MHz. The transimpedance is characterized over a frequency range of 10 Hz to 100 MHz. The TBCCP1-400K600 is primarily designed as a transducer for passive loop antennas or for measuring RF current in coaxial cables. The probe is equipped with an N connector and can be connected to a standard tripod via an attachment with a ¼ inch screw.

• Other electronic measuring instruments
• EMC Testing

A 150 kHz high-pass filter protects the RF input of a spectrum analyzer or EMI receiver from residual 50 Hz voltage in high-amplitude subharmonics and conductive emission measurement setups.

• Electronic Load Unit
• Other electronic measuring instruments

**Product Overview** The TBCDN-M4 is a coupling decoupling network for conductive immunity testing in accordance with IEC 61000-4-6. The TBCDN-M4 complies with IEC 61000-4-6 Annex D2. It is designed to inject common mode disturbance signals in the frequency range of 150 kHz to 230 MHz into unshielded AC and DC power lines.

• EMC Testing

An excellent cost-effective active antenna for low-frequency measurements. It fully covers the complete radio and television transmission frequencies up to 20MHz, including Tetra/BOS and ISM434. All BicoLOGXEMC test antennas undergo rigorous testing in the laboratory before shipment and are equipped with high-quality rubber coatings that protect against mechanical damage and environmental influences, as well as the highest quality integrated tripod connections and SMA connectors. Typical calibration data All AaroniaEMC stand antennas come with a complete high-resolution (10MHz or 5MHz steps!) calibration dataset that includes numerous calibration points (Excel file, download link provided). This allows for very accurate EMC measurements with any spectrum analyzer.

• Time-frequency measurements
• Other electronic measuring instruments
• EMC Testing

★Output with Multiple Combinations The SPS5000X series offers a wide range of output voltage combinations (40V, 50V, 80V, 160V) and current (7.5A to 90A), with rated outputs of 180W, 360W, 720W, and 1080W. The single-channel model supports up to two units in series and three units in parallel, while the two-channel and three-channel models also support series and parallel connections between channels. 【Main Features】 ● Rated output voltage: 40V, 50V, 80V, 160V ● Rated output power: 180W, 360W, 720W, 1080W ● Supports a wide range of output voltages and currents, achieving high-efficiency power supply ● CV and CC priority mode selection, effective for protecting the device under test ● Configurable timing output for three channels ● 170° wide viewing angle organic EL screen, remote web control

• Power Supplies