ウェーブクレスト List of Products and Services

The partial discharge measurement device TMG was specially developed for partial discharge testing in accordance with VDE 0434 and IEC 60270, with a focus on clarity and ease of use.

• Electronic Load Unit
• Other electronic measuring instruments
• Testing Equipment and Devices

The TPP-type partial discharge testing system is used for non-destructive insulation and quality testing of electrical components (such as VDE 0110-1, EN 50178, IEC 60270, IEC 60060, etc.). This test set enables testing in development, production, and quality assurance: ● The partial discharge measurement device (TMG) integrates the measurement of effective voltage, peak voltage, and current measurement. ● Shielded PD-free high voltage section ● Control unit with electronic overcurrent shutdown (STE) The standard test set from MPS supports test voltages from 3 to 20 kV. For voltages above this, please inquire. Options include: ● Current measurement through the test specimen ● Built-in high voltage partial discharge pulse calibrator (TPK-H) ● Measurement of DC voltage and current ● High voltage switch for measuring multiple test items

• Electronic Load Unit
• Other electronic measuring instruments
• Testing Equipment and Devices

The partial discharge test system TTS has been specially developed for high voltage (HI-Pot) and partial discharge testing of semiconductors (opto-couplers, digital isolators) in routine tests compliant with VDE 0884, IEC 60747-5-5, and UL 1577. The partial discharge test system supports test voltages up to a peak voltage of 18.3 kV. Partial discharge, test voltage (Urms and Upeak), test specimen current, and test specimen capacitance are measured with high precision. The partial discharge test system consists of a control and measurement unit integrated into a 19” housing that displays test voltage, current, and partial discharge. The high voltage generation unit is located within a high voltage module, which can be mounted on various handlers or manual measurement stations. MPS provides support for measurement and testing systems by integrating with the customer's unique system. The partial discharge test system is available not only for development purposes but also for 100% testing in production using handlers. A manual measurement station for manual assembly can be used for testing development or prototypes. Up to four handlers can be connected to the control computer.

• Electronic Load Unit
• Other electronic measuring instruments
• Testing Equipment and Devices

The FT8340 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. The simulator's current can be charged and discharged, supporting various fault simulations, thus meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The device has up to 12 channels, each electrically isolated, making it convenient for users to use in series. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. The FT8340 series uses a standard 19-inch chassis with a height of 2U and provides dual network ports and an RS485 communication interface. This makes it convenient to integrate into R&D and production line automation testing platforms, or it can be used standalone.

• Power Supplies

The FT83310 series is a high-precision, multi-channel, single-quadrant programmable battery simulator. It offers voltage accuracy of up to 0.01% F.S., supports current measurements at the microamp level, and can accommodate up to 24 channels in a single machine, with channels isolated from each other, allowing for the use of multiple channels in series. The simulator supports power mode, static power consumption testing functions, charging mode, battery simulation, sequence testing, pulse functions, and various fault simulations, meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The built-in upper computer software is easy to operate and flexible to use, supporting single-channel programming operations, multi-channel editing operations, and multi-process programming operations. The FT83310 series adopts a standard 19-inch chassis with a height of 3U and is equipped with LAN, RS485, and CAN communication interfaces, making it easy to integrate into research and development or automatic test platforms, while also allowing for standalone use.

• Power Supplies

The FT8350 series is a high-precision, multi-channel, dual-quadrant programmable battery simulator. It offers voltage accuracy of up to 0.01% F.S. and supports current measurements at the μA level. The device has up to 24 channels, which are isolated from each other, making it convenient for serial use of multiple channels. The simulator supports power mode, static power consumption testing functions, charging mode, discharging mode, battery simulation, sequence testing, pulse functions, and multi-fault simulation (only for the A series), meeting the requirements for BMS testing as well as being suitable for ATE testing of consumer electronic products. The built-in upper computer software is easy to operate, flexible, and user-friendly. It supports single-channel programming operations, multi-channel editing operations, and multi-process programming operations. It adopts a standard 19-inch chassis with a height of 3U and is equipped with LAN, RS485, and CAN communication interfaces, making it convenient for integration into R&D and automated test platforms, while also being usable as a standalone unit.

• Power Supplies

The FT8330 series battery simulator is a high-precision, multi-channel, single-quadrant programmable battery analog power supply. The single device channel can be up to 36, and each channel is electrically isolated, making it convenient for users to connect series and parallel power supplies. With ultra-high output precision and ultra-low ripple and interference characteristics, the power supplies in this series are widely used in testing systems for battery cells, supercapacitors, BMS, and more. The FT8330 series adopts a standard 19-inch chassis and provides Ethernet ports and RS485 communication interfaces. This is convenient for integration into automated testing platforms for research and development and production lines, and it can also be used individually.

• Power Supplies

The FTM8000 series is a powerful and highly flexible data collection and modular measurement platform. This product enables the collection and output of signals such as high-speed digital I/O, voltage, current, and temperature, as well as functions like relay control and temperature simulation. The FTM8000 test platform consists of a main chassis, a master control card, and various data collection and modular measurement boards. The main chassis features a compact design (standard 3U/19 inches) with 15 card slots. The board cards adopt a modular design, allowing any board card to be installed in any slot of the main chassis. Board cards can be used with just one card or simultaneously with multiple cards within the main chassis. This makes it very convenient for data acquisition and control of both simple and complex automated systems.

• Recorders
• Ammeter
• Temperature and humidity measuring instruments

5 GHz to 70 GHz Double Ridge Broadband Waveguide Horn Antenna, V Female Connector (1.85mm) EMC/EMI Test Antenna ● Frequency: 5–70GHz ● Dimensions (mm): 38x55x74mm ● Weight (N.W.): 70g

• Time-frequency measurements

★ Simplified setup ★ Real-time simultaneous measurement ★ Speed ★ Multiple probe system measurement ★ Multi-standard system ★ Compliance with automotive standards ★ Data export

• Other electronic measuring instruments
• EMC Testing
• Optical Measuring Instruments

Product Highlights - Maximum voltage for interference pulse generation is up to 1000 V - Generates two interference pulses continuously within 25 ns - Probe tip with a coil diameter of 250 µm (depending on the model)

• Signal Generator
• EMC Testing

International EMC standards require various spectral measurement methods and devices to ensure that the electromagnetic radiation of the EUT does not exceed specified limits. The TBMR-110M EMI Analyzer is designed to perform conducted emission measurements. Its affordability and versatility make it an ideal tool for engineers conducting pre-compliance measurements during the development process. Additionally, its ease of use allows importers of electronic products to regularly assess whether suppliers are providing consistent quality in terms of EMC compliance without having to outsource to testing agencies. High precision, versatility, and fast measurements are just a few of its many features.

• EMC Testing

In many industries that rely on GNSS signals for positioning and timing, the demand for real test scenarios is essential. OHB Digital Solutions' XPLORA Trace addresses this very challenge. Unlike ideal or theoretical modes, XPLORA Trace captures real GNSS signals and records them with the imperfections of the real world, which are specific to particular locations and times. This approach is crucial for addressing challenges in ADAS testing, consumer goods development, timing and synchronization solutions, GNSS receiver testing, and various R&D projects.

• Other electronic measuring instruments
• EMC Testing
• Signal Generator

【Product Overview】 The TBL0225-2 LISN is a 2-path 50 Ω // 2 µH LISN characterized by a frequency range of 10 Hz to 200 MHz. It is based on the standard ECSS-E-ST-20-07C Rev 1. This standard provides a general schematic for the LISN and allows for some flexibility in component values. The implementation of the TBL0225-2 is intended for use in EMC measurements of satellites and spacecraft. The LISN does not have an output for measuring conducted emissions; instead, it functions solely as a network to stabilize line impedance. An RF current monitoring probe is used to measure conducted emissions in accordance with the standard. The 2 µH inductor mimics the typical inductance of power wire harnesses in spacecraft and satellites. The LISN is inserted into the power line and power return line of the EUT.

• EMC Testing
• Testing Equipment and Devices
• Optical Measuring Instruments

The TBESDT2 ESD target is a current detection transducer used to validate ESD simulators. It is used for measurements compliant with IEC 61000-4-2, up to 4 GHz.

• EMC Testing

The EFS-18 is a next-generation isotropic electric field sensor based on a diode dipole. Its unique characteristics in bandwidth, sensitivity, and speed make this sensor stand out among its kind. The EFS-18 sensor is designed for evaluating the characteristics of electric fields in TEM, GTEM cells, and anechoic chambers, as well as for monitoring applications in the field of electromagnetic safety and critical points. Measurements are displayed in real-time on a PC/tablet using the EMCViewer software that comes with the probe. The software shows isotropic values, uniaxial components, and the amplitude/time response of the electric field. Users can also export the graphics and data for further processing. The EMCViewer software can manage and display up to 8 sensors simultaneously. With the device's excellent autonomy and fast charging time, users can operate for over 50 hours, even after charging the battery for just 20 minutes, allowing for more than 4 hours of use.

• EMC Testing

XPLORA Core is a GNSS simulator suitable for both beginners and experts, covering all needs such as testing and verification of GNSS hardware, research, or satellite constellation simulation. It allows for the rapid creation of simulations and fine-tuning of parameters to accommodate more complex test scenarios, providing significant benefits. You can configure satellite orbits and navigation messages, and change simulation parameters on the fly or in hardware-in-the-loop setups. By using highly detailed signal simulations, it improves countermeasures and mitigation strategies against interference and spoofing. XPLORA Core is modular, functional, and intuitive. It can generate all currently available public GNSS signals and frequencies. It offers real-time direct RF signal playback or digital IF baseband signal generation. Additionally, simulation of GNSS receiver observables is also available. The simulator's capabilities can be tailored to precisely meet user requirements by providing optional signals, frequency bands, interference, and multiple receiver simulations.

• Other measurement, recording and measuring instruments
• Distance measuring device
• Other operation management software

The NavTD M23 can generate and transmit jamming and spoofing signals. This allows for the evaluation of the vulnerabilities of existing military GNSS equipment and the performance of countermeasures in a protected environment. The NavTD M23 is designed to easily generate and transmit jamming and spoofing signals, enabling the assessment of various types of attacks on receivers from broadcasted RF signals. This allows military forces to test their equipment in a protected, realistic environment. It is used to evaluate vulnerabilities and improve equipment to effectively counter GNSS interference.

• Other measurement, recording and measuring instruments
• Distance measuring device

The portability and high-end form factor of GIDAS Portable allow for monitoring GNSS quality as needed. It is designed to be temporarily deployed in any field or weather conditions. GIDAS Portable supports not only private companies but also public agencies and government organizations, assisting in law enforcement. GIDAS Portable is a fully autonomous, portable real-time system that monitors GNSS services as needed. If interference is detected, alerts are sent to the user via the user interface, email, or a custom interface. GIDAS Portable is specifically designed for temporary installation or complete portable use, capable of detecting and classifying a wide range of jamming and spoofing signals. In addition to full autonomous operation, GIDAS Portable can also function as a portable monitoring sensor within a (static) GIDAS fixed installation.

• Other measurement, recording and measuring instruments
• Distance measuring device

GIDAS Mobile is a flexible mobile data collection unit for GIDAS installations. It is mounted on the roof of the vehicle and integrates the monitoring center and sensors. It is specifically designed to monitor GNSS interference while in motion.

• Other measurement, recording and measuring instruments
• Distance measuring device
• Other electronic measuring instruments

XPLORA Pro is a real-time GNSS signal simulator consisting of a high-quality signal generator as a hardware platform and the flexible and powerful GNSS simulation environment XPLORA Core. XPLORA Pro provides a real-time input interface, supporting HIL (hardware-in-the-loop) scenarios such as automotive applications. It offers a multi-channel high-performance platform for conducting complex and versatile GNSS tests in a single complete system. GNSS signal modulation is executed in real-time with very low latency by the S1000 GNSS firmware. This not only meets a wide range of stringent testing requirements but is also used to perform integrated automatic sequences to reduce time to market. XPLORA Pro is the ideal solution for high-sensitivity professional applications requiring real-time simulation of GNSS, jamming signals, and spoofing signals, as well as for testing systems that require HIL scenarios.

• Other measurement, recording and measuring instruments
• Distance measuring device

GIDAS is a state-of-the-art permanent GNSS quality assurance system designed for critical infrastructure where safety is paramount, such as airports and ports. Air traffic controllers and port managers can verify the integrity and quality of GNSS on-site in real-time before navigation systems are adversely affected by GNSS interference. GIDAS consists of multiple monitoring sensors deployed in the area of interest. All data is stored in a single monitoring center installed locally, allowing customers complete control over their data without the need for cloud infrastructure. GIDAS automatically performs interference detection continuously (24/7) and can connect with higher-level systems such as air traffic management consoles through real-time alerts (TTA < 6 seconds). GIDAS can be easily set up and operated via a web-based user interface without the need for software installation. The responsive design of the user interface supports multiple form factors (desktop PCs, notebooks, tablets, smartphones).

• Other measurement, recording and measuring instruments
• Distance measuring device

The TBAS4 RF attenuator set consists of 3dB, 6dB, 10dB, and 20dB N attenuators at 6 GHz/2W, packaged in a beech wood box.

• Other electronic measuring instruments
• Other measurement, recording and measuring instruments
• Optical Measuring Instruments

**Product Overview** The TBL0110-2 LISN is a 2-path 50 Ω // 1 µH LISN characterized by a frequency range of 30 Hz to 500 MHz. It is based on the standard ECSS-E-ST-20-07C Rev 1. This standard provides a general schematic for LISNs and allows for some flexibility in component values. The implementation of the TBL0110-2 is intended for use in EMC measurements of small satellites and spacecraft. The LISN does not have an output for conductive radiation measurements; instead, it functions solely as a network to stabilize line impedance. An RF current monitoring probe is used to measure conductive radiation in accordance with the standard. The 1 µH inductor mimics the typical inductance of power wire harnesses in small spacecraft and satellites. The LISN is inserted into the power line and power return line of the EUT.

• EMC Testing
• Testing Equipment and Devices
• Optical Measuring Instruments

**Product Overview** CDNE is a type of coupling decoupling network used as an alternative technology for measuring the radiation of lighting equipment in accordance with the CISPR 15 (EN55015) standard. This avoids the need for emission measurements in open area test sites. This method was established in CISPR 15 Edition 9 as an acceptable alternative to the conventional OATS test configuration, which requires antennas and calibrated test sites, and is specified for a frequency range of 30 MHz to 300 MHz. The CDNE method and its associated limit of up to 300 MHz apply only to EUTs with clock frequencies below 30 MHz. In this case, the product is considered to comply with the requirements for 300 MHz to 1000 MHz. Compared to CDN, CDNE is specified much more rigorously, with reduced common mode (CM) impedance tolerances and the addition of parameters for CM phase tolerances and differential mode impedance equal to 100 Ω. If the longitudinal conversion loss is at least 20 dB, it can prevent symmetrical voltage from affecting the measurement results.

• EMC Testing

【Product Overview】 CDNE is a type of coupling-decoupling network used as an alternative technology for measuring the radiation of lighting equipment in accordance with the CISPR 15 (EN55015) standard. This avoids the need for emission measurements in open area test sites. This method was established in CISPR 15 Edition 9 as an acceptable alternative to the conventional OATS test configuration, which requires antennas and calibrated test sites, and is specified for a frequency range of 30 MHz to 300 MHz. The CDNE method and its associated limit of up to 300 MHz apply only to EUTs with clock frequencies below 30 MHz. In this case, the product is considered to comply with the requirements for 300 MHz to 1000 MHz. Compared to CDN, CDNE is specified much more rigorously, with reduced common mode (CM) impedance tolerances and the addition of parameters for CM phase tolerance and differential mode impedance equal to 100 Ω. If the longitudinal conversion loss is at least 20 dB, it can prevent symmetrical voltage from affecting the measurement results.

• EMC Testing

【Main Features】 ● Compact design, lightweight ● Excellent performance ● Outstanding appearance design ● Compliant with MIL standards

• Time-frequency measurements
• Other measurement, recording and measuring instruments
• Environmental Test Equipment

By using the optical multiplexer eoSwitch, up to 16 probes can be sequentially addressed from a single optoelectronic converter. Since there is no galvanic link and it is battery-operated and shielded, it can be used in fields close to the measurement. These are fully powered by the optoelectronic converter eoSense via an optical link.

• EMC Testing

【Product Overview】 The Semiconductor Device C-V Characteristic Analyzer TH510 Series is an analytical device designed for the design and research of semiconductor materials and components. It innovatively adopts next-generation technologies such as dual CPU architecture, a Linux-based system, a 10.1-inch capacitive touchscreen, an English operating interface, and built-in instructions and help. It can accommodate automatic integration and classification on production lines, as well as research and development and analysis in laboratories. The design frequency of the Semiconductor Device C-V Characteristic Analyzer TH510 Series ranges from 1kHz to 2MHz, with a VGS voltage reaching ±40V and a VDS voltage reaching 200V/1500V/3000V. It supports CV characteristic testing and analysis of conventional semiconductor components such as diodes, triodes, MOS tubes, and IGBTs. Thanks to the 10.1-inch capacitive touchscreen with a resolution of 1280*800, the TH510 Series can display four parameters simultaneously. All settings, monitoring, sorting parameters, statuses, etc., can be displayed on the same screen, avoiding the hassle of frequent switching between different displays.

• Other electronic measuring instruments
• Optical Measuring Instruments

**Main Features** - 5.0-inch capacitive touch screen - 6 1/2 digit measurement resolution - Four measurement modes: independent current and voltage measurements for high resistance meter, voltmeter, ammeter, and potentiometer - Built-in voltage source: ±1000V, resolution: 700μV - Current range: 2pA to 20mA, with a maximum current resolution of 1fA (10^-15A), and internal resistance voltage drop of <20μV at the lowest current range - Measurement resistance is high at 1PΩ (10^15Ω), and charge measurement is low at 2nC. Input impedance is >200TΩ - Supports voltage measurement up to 20V, as well as temperature and humidity measurement - Time domain view, captures transient signal effects, and supports selection of specified measurement data for data recording - Comes with a dedicated shielded test box

• Ammeter
• Voltage Meter
• Thermo-hygrometer

**Main Specifications** - Frequency Range: DC to Sub 6 GHz (expandable up to 110 GHz) - Positioning Accuracy: 0.02° - Payload Capacity: 50 pounds - 2000 pounds (approximately 23 kg - approximately 907 kg) - DUT Test Size: 10 cm to 3 m - Elevation Angle: ±180° - Azimuth: 360° continuous - Roll: 360° **DMC 360 Software Features** - Passive Measurements (Amplitude and Phase) - Active Measurements (TRP, EIRP, TIS, EIS, EVM) - OTA 2G, 3G, 4G, 5G Testing - OTA Bluetooth and BLE TRP & TIS Testing - OTA GNSS Testing - Compatible with all bands and common wireless systems (GSM, UMTS, LTE, LTE-M, NB-IoT), etc. *DMC provides testing compliant with 3GPP and ETSI standards, including RED compliance testing.

• EMC Testing

The TBESDT1 ESD current target is a current detection transducer used to validate ESD simulators. It is used for measurements compliant with IEC 61000-4-2 up to a maximum of 4 GHz.

• EMC Testing

**Product Overview** The TBCDN-M5 is a coupling decoupling network for conductive immunity testing in accordance with IEC 61000-4-6. The TBCDN-M5 complies with IEC 61000-4-6 Annex D2, which is designed to inject common mode disturbance signals in the frequency range of 150 kHz to 230 MHz into unshielded AC and DC power lines.

• EMC Testing

The TBBT01 Bias-Tee is a device used to measure the saturation effect of power inductors and the effect of bias voltage on capacitors. Most bias tees available for power inductor testing operate at low frequencies, making them unsuitable for evaluating RF power amplifiers or decoupling/bias inductors in EMC filters. However, RF bias tees typically have limited current capacity and cannot be used in lower frequency ranges. The TBBT01 can measure not only high currents but also high bandwidth. Power inductors often use ferrite cores, which are affected by magnetic saturation. Even before reaching the magnetic saturation current specified in the inductor's datasheet, the inductance begins to decrease, and the RF characteristics of the component deteriorate. The impact of DC current is often underestimated when constructing EMC filters, leading to filters not functioning as planned. A high-current bias tee is necessary to evaluate the frequency response of EMC filters under load conditions. High-current bias tees can be used for a wide range of additional applications.

• Other electronic measuring instruments
• Other electronic parts
• Other measurement, recording and measuring instruments

The open GTEM cell "TBGTC1" is a low-cost open TEM cell for EMC compliance testing. Unlike TEM cells that have limitations at higher frequencies, the GTEM cell can operate at several GHz. Using a spectrum analyzer equipped with a tracking generator, modulated power amplifier, and EMCview software, you can inspect the radiated emissions and immunity of products before and after EMC-related design changes. Engineers can easily verify whether their changes have improved, adversely affected, or left unchanged the EMC performance. With the use of the GTEM cell, there is no need to rely on guesswork. When the TBGTC1 is positioned vertically, the required area is only 78 cm × 52 cm. The EUT can be easily placed on the included wooden board located on the GTEM cell spacer.

• EMC Testing
• Testing Equipment and Devices

The TBCG3-RN6 comb generator is primarily designed for testing radiated emission settings. It serves as a tool to verify the proper operation of antennas and preamps, as well as the accurate setup and configuration of spectrum analyzers. Its characteristics are well-known in anechoic chambers, and the radiation plots can be used as a benchmark to compare the comb generator with the EUT in the same location under non-ideal settings. Using a rotary switch, you can select between five fixed comb frequencies and an external comb frequency input ranging from 5 kHz to 200 MHz. The comb generator comes with two monopole antennas: one 30 cm monopole for frequencies up to 300 to 500 MHz, and another for higher frequencies. The radiated comb spectrum is characterized in the range of 5 MHz to 6 GHz. The TBCG3-RN6 features a 50-ohm output with a female N connector. This device operates on six AA nickel-metal hydride batteries and includes an external charger.

• Signal Generator

The TBCG3-RN2 comb generator is primarily designed to test the setup of radiated emissions. It is a tool that helps verify the proper operation of antennas and preamplifiers, as well as the accurate setup and configuration of spectrum analyzers. Its characteristics in anechoic chambers are well known, and the radiation plot can be used as a benchmark to compare the comb generator at the same location as the EUT with non-ideal settings. Using a rotary switch, you can select between five fixed comb frequencies and an external comb frequency input ranging from 5 kHz to 200 MHz. The switchable RF amplifier can potentially increase the output signal by 20 decibels (dB). The comb generator comes with two monopole antennas: one is a 30 cm monopole for frequencies up to 300 to 500 MHz, and the other is for frequencies above that. The radiated comb spectrum is characterized in the range of 5 MHz to 6 GHz.

• Signal Generator

TBCG1 is a radiation comb generator equipped with an internal antenna and a fundamental frequency of 100MHz. It radiates a comb spectrum with characteristics up to 6GHz. The comb generator is built and characterized to serve as a rough reference for testing radiation noise measurement setups such as anechoic chambers, TEM/GTEM cells, and shielded rooms. It is a portable device powered by a 9V alkaline battery.

• Signal Generator

TBCG2 is a passive step recovery diode-based comb generator/frequency multiplier. It is optimized for moderate drive power and spectral flatness in the frequency range of 1 MHz to 2.5 GHz. The recommended drive power is +10 dBm to +20 dBm. The frequency range of the drive signal is 1 MHz to 350 MHz.

• Signal Generator

The TBCG3-CN comb generator is primarily designed to verify the setup of conductive emission tests. It is a useful tool for validating the correct operation of the LISN, the proper setup of the spectrum analyzer, and the correct configuration. Using a rotary switch, you can select between five fixed comb frequencies and an external excitation input in the frequency range of 5 kHz to 300 MHz. The comb generator comes with country-specific adapter cables that plug into the DUT socket of the LISN (when powered off). This device operates on four AA nickel-metal hydride batteries and includes an external charger. The TBCG3-CN generates a comb spectrum with approximately 8 dB flatness over a frequency range of up to 1.5 GHz and features a 50-ohm output with a female N connector. The housing is made from solid aluminum, and the 1/4 inch – 20 UNC screws on the comb panel are compatible with standard tripod bolts.

• Signal Generator

**Product Overview** The TBL05100-1 is a universal 5µH LISN that meets the requirements of several standards. The TBL05100 is factory-jumpered to 50Ω // 5µH + 1Ω, complying with the impedance and phase isolation specifications of CISPR 16-1-2 and CISPR 25. By setting the internal jumper, it can be converted to a 50Ω // 5µH variant that supports standards such as CISPR 25, MIL-STD-461G, ISO11452-4, and ISO 7637-2. Adding an external 10F capacitor will adjust the impedance to meet DO-160 specifications. The LISN is inserted into the power line of the EUT (Equipment Under Test). The conducted noise from the EUT's power terminals can be monitored via a BNC connector using a spectrum analyzer or measurement receiver. The 5µH inductor isolates the source (supply) terminal from the EUT terminals. Using two TBL05100-1 units in combination with the Tekbox LISN Mate allows for the separate measurement of common mode noise and differential mode noise.

• EMC Testing
• Testing Equipment and Devices
• Optical Measuring Instruments

【Features】 - High sensitivity - Isotropic & effective value measurement - Excellent attenuation - Compliance with international standards

• EMC Testing
• Strength Testing Equipment
• Other electronic measuring instruments

The SIGLENT SHA850A series is a handheld portable spectrum analyzer and cable/antenna analyzer, providing a powerful and flexible tool for field and outdoor RF applications. It encompasses areas such as communication engineering, telecommunications operations and maintenance, radio management, factory production, education and training, and many others. This analyzer offers a frequency range of up to 7.5 GHz, reliable automatic measurements, and multiple operating modes. The spectrum analyzer, which includes a built-in amplifier and independent signal source, high-speed scanning, and high sensitivity, can achieve broadcast monitoring, channel power scanning, radio interference location, power monitoring, electromagnetic compatibility, and other functions. The cable and antenna tester, equipped with built-in DC voltage bias and one-pass two-port vector network analysis capabilities, can perform TDR, VSWR, port matching debugging, insertion loss measurement, tower amplifier debugging, cable fault location, Smith chart analysis, and more.

• Other electronic measuring instruments
• EMC Testing

The HR-R 8-1 set includes the HR-R 8-1 B-field probe, which allows for magnetic field measurements up to 40GHz. The special probe head of the HR near-field probe enables direct measurements on IC pins or individual conductor tracks, allowing you to pinpoint the source of the B-field.

• Other electronic measuring instruments
• EMC Testing

Flexibility, reliability, durability ● Seamless user experience with three preset modes ● Standard mode / Bin mode / Parking mode ● Ultrasonic distance detector with small blind spots ● Powerful performance with a 3-in-1 sensor ● Ultrasonic distance sensor, 3-axis accelerometer, NTC thermistor ● Long-lasting 10-year battery life ● Robust and reliable enclosure compliant with IP67

• Other measurement, recording and measuring instruments
• Distance measuring device
• Other security and surveillance systems