データコントロルズ List of Products and Services

The FMC series is a line of compact and simple Ethernet optical media converters. There are two models of Ethernet optical media converters: the FMC-10/100 series (10/100base-TX to 100Base-FX) and the FMC-1001S (10/100/1000base-T to 100/1000Base-X SFP), both of which can be implemented in the FMC-CH17 series (2U 17-slot chassis). The FMC series enables flexible networking.

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

The WPM-19 is a lightweight, handheld, simple optical power meter with wavelength measurement capabilities. By simply inserting the connector into the measurement section, it can measure both optical output and wavelength simultaneously. It is equipped with various functions that can be used for CWDM installation, maintenance, FTTH services, field services for CATV companies, and maintenance services. It is waterproof and durable, making it suitable for outdoor use. Additionally, it features a lithium-ion rechargeable battery, allowing for extended use in the field or within stations/data centers.

• LAN construction and wiring work
• Other network tools

Attenuators are sometimes used to protect devices from saturation of the light reception amount of photodetectors when using CATV equipment with excessive output or Ethernet LAN connections over short distances. There are fixed attenuators with a set amount of attenuation and variable attenuators where the attenuation can be adjusted. By combining these, the maximum transmission performance of the equipment can be easily measured.

• Converters and Transducers
• Other network tools
• Other optical parts

◆Wide operating temperature range (-40℃ to 70℃) ◆8×10/100/1000Base-T (with 4×1000Base-X combo) managed gigabit switch ◆Dual DC power input support (12–48VDC) ◆O-Ring support * Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆IGMP v2/v3 (IGMP snooping) support ◆SNMP v1/v2/v3 support ◆IEC62439-2 MRP (Media Redundancy Protocol) compliant ◆ModbusTCP protocol support ◆IPV6 Internet protocol support ◆HTTPS/SSH protocol support ◆Automatic speed detection/automatic MDI/MDI-X ◆DIN rail and panel mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

The HSP-T003/R003 series is a device that can extend Full HD HDMI signals up to 300 meters without degradation by using a single-core SC connector multi-mode optical cable.

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆10×10/100Base-T (including 2×100/1000Base-X combo ports), 2×100/1000Base-X (SFP) *10/100Base-T and combo managed Gigabit PoE switch ◆Dual DC power input support (50–57VDC) ◆O-Ring support *Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆Compliant with IEEE802.3at standard ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IPV6 Internet protocol support ◆HTTPS/SSH protocol support ◆Traffic monitoring via RMON ◆DIN-Rail and wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

When connecting devices with a fiber optic interface to optical converters, or when the distance of the fiber optic is insufficient, two cables are extended and connected.

• Other network tools
• Optical Experimental Parts

The MMC-10GFT series is a compact design optical media converter that supports 10Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series supports broadband applications and easily enables a more comfortable network.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

● 1U size, 24 ports ● Cable hanger (removable) ● Adapters can be freely combined (optional) ● RoHS compliant

• LAN construction and wiring work
• Other network tools

Optical dispersion wavelength compensation devices are effective for long-distance communication systems using optical fibers at high bit rates such as 10G and 40G bits per second. The oW1500 series improves network performance by being installed similarly to optical amplifiers. The lineup is extensive and accommodates various compensation levels. You can select models according to your network and communication environment. This enables maximum communication with minimal investment.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆8×10/100Base-TX, 2×100/1000Base-X (SFP) managed switch ◆Supports three DC power input systems (12-48VDC), power jack compatible (12-45V) ◆O-Ring compatible * Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 devices) ◆RSTP/STP compatible ◆Complies with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IGMP v2/v3 compatible ◆SNMP v1/v2c/v3 compatible ◆IPV6 compatible ◆Supports HTTPS/SSH protocols ◆DIN-Rail and wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work
• VPN/Wide Area Ethernet

The MMC-1GFT series is a compact design optical media converter that supports 1Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports the "LFP (Link Fault Pass Through) function." The MMC series caters to broadband applications, making it easy to achieve a more comfortable network.

• Routers, Switches, and Hubs
• LAN construction and wiring work
• VPN/Wide Area Ethernet

The transmission port features detachable 8 pairs of multi-rate SFP/SFP+ ports, capable of transmitting up to 80G of unidirectional/bidirectional single-core or dual-core signals using WDM, or 40G of bidirectional signals in two sets of single-core. Optionally, high-density WDM filters and amplifiers can be added within the same chassis, enabling space-saving long-distance transmission. This allows for significant total cost reductions in fiber costs and network nodes. The transmission ports can also be paired to function as independent repeaters (media converters) for up to 8 units. The DCWDM2108H is equipped with FEC functionality, enabling high-quality communication and remote monitoring (monitoring of the remote device OTN61002). It includes local and remote monitoring capabilities via LAN and OSC (SNMP/syslog), as well as local monitoring through a serial console and office alarm contacts.

• VPN/Wide Area Ethernet
• LAN construction and wiring work

●You can check the remaining usage amount (remaining count) on the display window. ●Please refrain from using it in high temperature and high humidity environments. ●Weight: 10 g, Thickness: 13 mm ●Number of washes: ~ 1,000 times

• Other network tools

Many gigabit Ethernet switches and gigabit Ethernet NICs (LAN cards) commonly use twisted pair cables (UTP) for 1000Base-T or multimode fiber (MMF) for 1000Base-SX interfaces. The GE-C301 series facilitates media conversion between servers with built-in 1000Base-T and gigabit switches with 1000Base-SX without reducing speed. It also enables high-speed media conversion at gigabit speeds when connecting gigabit switches' 1000Base-T to inexpensive gigabit NIC cards' 1000Base-SX. This media converter can be used not only as a standalone device but also in wiring closets, and it can be installed as a slide-in module of the converter rack CR-1112 series, which can accommodate up to 12 units in a 19-inch rack.

• Routers, Switches, and Hubs
• LAN construction and wiring work
• VPN/Wide Area Ethernet

◆IEEE 802.3az low power consumption ◆Check the usage and cable length for each port and adjust power accordingly ◆L2+ features for security/QoS/performance ◆All Gigabit ports ◆Easy setup function ◆IPv4/IPv6 management ◆Supports dual-rate 100/1000 SFP modules ◆Built-in DMS (Device Management System) ◆PSGS supports Gigabit PoE+ ◆RoHS compliant

• Routers, Switches, and Hubs
• LAN construction and wiring work

VDTU2-B130 is a VDSL2 Gigabit LAN extender that utilizes a maximum bandwidth of 300Mbps (downstream: 150Mbps / upstream: 150Mbps). The synchronous profile can be applied as a standard Ethernet connection, while the asynchronous profile can be used for high-speed traffic flows required by video streaming and IP surveillance services. The VDTU2-B130 maximizes the use of existing telephone lines. It enables data communication and video streaming with minimal investment through plug-and-play, requiring no complicated setup.

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

The VGA extender uses CAT5 STP or UTP cables to extend VGA video signals up to a maximum of 100 meters. This VGA extender can be utilized as an efficient and cost-effective alternative solution without using expensive VGA cables, not only for home use but also for commercial purposes. The VE01P series is ideal for applications such as video distribution in classrooms and auditoriums, kiosks, video information displays, and demonstrations in PC training systems and exhibitions.

• Other network tools
• LAN construction and wiring work

The CR-1112 series is a converter rack that provides the optimal solution for managing media converters. Its high-density design allows for the storage of various types of multimedia converters (FE/GE series) with a capacity of up to 12 units. These converters comply with IEEE multi-protocol standards, including 10Base-T/2/FL, 100Base-TX/FX, and 1000BaseT/SX/LX/ZX. They also comply with RoHS directives. Since the converters are connected directly to the mainboard of the chassis, there is no need for new media converter power cables (AC adapters). Furthermore, there is complete flexibility in choosing AC/DC and single/redundant options, and models equipped with redundant power can handle sudden failures or malfunctions in the power supply. Additionally, media converters, cooling fans, and power modules are hot-swappable.

• LAN construction and wiring work
• Other network tools

By installing the FTAP-2000/4000 series 10 Gigabit optical network tap in the I/O section of a high-speed fiber network, it becomes easy to visualize the traffic of monitoring devices such as measurement instruments and analyzers, as well as security devices. This optical fiber tap adopts a slim 1/2U chassis, saving rack space and accommodating up to 8 channels of taps in a 1U high chassis. The power-free optical network tap is equipped with a permanent and passive monitoring port that does not cause disruptions or interfere with other network connections, enabling 24-hour full-duplex monitoring without affecting network traffic. This optical network tap allows for the isolation of monitoring devices from the network, significantly reducing the risk of attacks. Additionally, there is no need to set an IP address for the monitoring devices, and by connecting the monitoring devices to the tap for use as inline devices, it becomes possible to visualize all full-duplex traffic, including Layer 1 and Layer 2 errors.

• Other network tools
• LAN construction and wiring work

This device is a PoE inline power-capable hub with a 4-port powered 10/100Mbps port interface and a 1-port non-powered 10/100TX metal/100FX (SFP) combo interface. It allows for easy Ethernet LAN communication and DC power supply using existing Cat5/Cat5e twisted pair LAN cables. With the introduction of the KSD-541, there is no need for power installation for devices such as IP cameras, wireless APs, VOIP, and RFID. Additionally, by selecting optional SFP modules (optical transmission modules), fiber optic connections from distances of several kilometers to about 100 kilometers can be easily achieved. It operates at 6V to 48V and is designed for outdoor use, functioning in temperatures ranging from -20°C to 70°C. (Note: However, when using PoE (inline power), it requires DC 48V.)

• Routers, Switches, and Hubs
• LAN construction and wiring work

VE02AL is a VGA extender designed to transmit signals using stereo audio signals over cost-effective CAT5e UTP cables. The RX receiver can be daisy-chained, allowing for network extension and VGA output expansion by connecting multiple RX receivers. It provides an optimal solution for shopping malls, airports, train and bus stations, conference rooms, trade shows, and more.

• LAN construction and wiring work
• Other network tools

The MCS-2160 modular media converter chassis enables a variety of applications such as FTTX, CWDM, and Carrier Ethernet. By using different XC module cards that support speeds of up to 10Gbps, it is possible to build an ideal network topology. It provides easy access to the management interface, allows for checking system status and counters, and offers firmware upgrades, FPGA updates, and network statistics.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

The FE-C130 series is a media converter that converts 10/100Base-TX and 100Base-FX Fast Ethernet, equipped with LFP (Link Fault Pass Through) functionality as standard. The features of this media converter are designed to easily and affordably connect two types of segments. It is also capable of receiving power from a USB port without using the included AC adapter. It is a compact and simple structured optical media converter.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

The IGMC-1011GF/GP is a gigabit optical media converter for industrial networks, equipped with 1×10/100/1000Base-T and 1000Base-X. It supports a wide temperature range of -40℃ to 70℃, making it suitable for almost any operating environment. Due to its simple design that requires no configuration, it can be easily integrated into nearly all network applications. It supports jumbo frames (9k), making it one of the optimal choices for industrial network applications.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

◆ Built-in single-core WDM multimode ◆ Usable with multimode fiber (MMF) 　　* Not usable with H-PCF ◆ Communication possible with single-core MMF ◆ Maximum transmission distance of several meters to 2 km with MMF ◆ Connection to L2 switches, hubs, and routers via twisted pair I/F at 100 Mbps ◆ Significantly reduces installation labor ◆ RoHS compliant ◆ Transmission wavelength (center wavelength): HPC-F257SC.S3: 1310nm (transmission) / 1550nm (reception) HPC-F257SC.S5: 1550nm (transmission) / 1310nm (reception) * Each is used in pairs.

• LAN construction and wiring work
• Other network tools

The HKM01-4K is a cost-effective 4K HDMI KVM extender that uses Ethernet cables to extend HDMI, USB, analog audio, RS232, and infrared IR signals up to 140 meters. The transmission unit features an HDMI loop output port that allows for the addition of an HDMI display. With four built-in USB 2.0 ports in the RX unit, connected HDMI devices can be managed and controlled remotely. The KVM extender is ideal for applications such as broadcasting systems, digital signage, home network integration, and industrial control.

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆4x10/100Base-TX, 2x100Base-FX (SFP) ◆Dual system DC power input support (12-48VDC) ◆O-Ring support *Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 devices) ◆RSTP/STP support ◆SNMP v1/v2c/v3, MIB support ◆DIN-Rail and wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆ 1 port × 10/100/1000Base-T PD input ◆ 2 ports × 10/100/1000Base-T P.S.E output ◆ Compliant with IEEE802.3at/802.3af standards ◆ Wide operating temperature range -20 to 70℃ ◆ PoE P.D maximum 90W power input ◆ PoE P.S.E maximum 90W power output per port* ◆ IP-30 robust design ◆ Mountable on DIN rail and wall

• LAN construction and wiring work
• Other network tools

The FRM220-SERIAL is an asynchronous RS-232, RS-422, or RS-485 transmission modem. It can extend up to 2 km in multi-mode and up to 120 km in single-mode. This modem has multiple interfaces that can connect, including RS-232 and RS485/422 (2/4 wire, full duplex/half duplex). For RS-232, it guarantees data transmission at speeds of up to 256 kbps, and for RS485/422, it guarantees speeds of up to 1024 kbps using EMI-resistant fiber. When the FRM220-Serial is installed in an SNMP-managed FRM220 rack, it allows for in-band management to monitor the status, type, version, optical link/data link status, alarm settings, and various displays of the card module and remote converter. If used in a standalone chassis without management functions, settings can be configured using DIP switches.

• Other network tools
• LAN construction and wiring work
• VPN/Wide Area Ethernet

The system can be used with full-duplex/half-duplex communication methods for control systems and supports both synchronous and asynchronous communication. Regardless of the external metal side (device side) interface, the optical modem itself comes with a standard HD-26 connector interface, and dedicated connector attachments compatible with V.35/RS-232/R530/X.21/RS449 interfaces are included. Settings such as communication speed and communication method can be changed using the built-in DIP switches.

• Other network tools
• LAN construction and wiring work
• VPN/Wide Area Ethernet

The FRM220-FXO/FXS is a fiber converter that uses the Plain Old Telephone System (POTS). In FXO mode, it connects to a telephone line (PSTN) or PBX line and functions as a telephone by detecting ringing signals. Additionally, in FXS mode, it functions as a PSTN and can be connected to a telephone. When housed in a chassis with SNMP management, it allows for in-band management, enabling the display and configuration changes of the status of local/remote converters. Manual settings via DIP switches are also possible.

• Other network tools
• PBX/IP phone
• LAN construction and wiring work

◆Wide operating temperature range (-40℃ to 70℃) ◆2×10/100Base-TX, 1×100Base-FX media converter ◆DIN rail and panel mountable ◆Dual DC power input support (12~48 VDC) ◆Compact design of 26.1 (W) x 70 (D) x 95 (H) mm

• LAN construction and wiring work
• Other network tools

The "TES-150-M12" is an industrial Ethernet switch compliant with the EN50155 standard, capable of withstanding severe vibrations and shocks. It supports a wide operating temperature range, ensuring stable operation even in harsh environments. It is used in applications such as railway vehicles and vehicle transportation. It has also been adopted as the backbone for Ethernet communication within vehicles in the London Underground. 【Overview】 ■ 5 ports × 10/100 Base-TX ■ Wide operating temperature range: -40℃ to 70℃ ■ Speed auto-detection and automatic MDI/MDI-X ■ Store & forward and flow control support ■ Wall mountable ◎ For more details, please refer to the PDF document or feel free to contact us.

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆4×10/100Base-TX, 2×100Base-FX (SFP) ◆Dual system DC power input support (48VDC), DC power input jack support ◆O-Ring support ※Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆Compliant with IEEE802.3af standard ◆SNMP v3 support ◆DIN-Rail and wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆ 10/100/1000Base-T ×1 port ◆ 100/1000Base-X (SFP slot) ×1 port ◆ Supports multi-channel applications when connected to the PHB-200 series ◆ Compatible with FRM220-CH01 standalone chassis ◆ Compatible with FRM220-CH20 managed chassis ◆ F/W upgrade via WEB-GUI (only in standalone mode) ◆ RoHS compliant ◆ Automatic laser output shutdown ◆ Remote power-off notification ◆ Flow control (enabled/disabled) ◆ Jumbo frame 9Kbytes ◆ Supports 16-tag VLAN groups

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

◆ 4x10/100/1000Base-T(X) ports ◆ 2x100/1000Base-X SFP ports ◆ Redundant power input support (24–48VDC) ◆ Supports jumbo frames up to 9Kbytes ◆ Automatic speed detection / Automatic MDI/MDI-X ◆ Store and forward ◆ Flow control support ◆ IP-30 ◆ DIN rail mountable, wall mountable ◆ Wide operating temperature range (-40~70℃)

• Routers, Switches, and Hubs
• LAN construction and wiring work

It is a simple and compact asynchronous full-duplex/half-duplex optical modem. It is capable of flow control/transmission procedure control with data signal TX, RX, and control signal RTS/CTS operation (or DTR/DSR operation, etc.), and can notify when there is an abnormality at the remote terminal (DTR) in the case of DTR/DSR connection in the modem status at the center station. It can transmit the FAR END FAULT (remote terminal fault) notification to the local station's optical modem as a down (Down) status of the DSR (Data, Set, Ready) of the local station's optical modem.

• Other network tools
• LAN construction and wiring work

In large premises such as schools, factories, station buildings, plant facilities, and building cities, when powering devices via PoE exceeds the 100m distance limit and AC commercial power installation is not feasible, the POT-0100/0110 can utilize the two-wire DSL line within the premises to provide power and VDSL communication simultaneously up to 500m. The remote POT-0110 (Power Over Telephone Line) is a simple and cost-effective device that provides power and Ethernet infrastructure to remote IP terminals such as IP cameras, wireless APs, RFID devices, IP seismometers, and IP anemometers, up to 500m away.

• Other network tools
• PBX/IP phone
• LAN construction and wiring work