データコントロルズ List of Products and Services

◆Wide operating temperature range (-40℃ to 75℃) ◆Dual system DC power input support (50-57VDC) ◆Compliant with IEEE 802.3at standard ◆O-Ring support ※Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IEEE1588v2 clock synchronization support ◆IPV6 Internet Protocol support ◆SNMP v1/v2c/v3 & RMON & 802.1Q VLAN network management support ◆ModbusTCP protocol support ◆Network security HTTPS/SSH protocol support ◆IEEE802.3az EEE technology support ◆SMTP client compliance ◆Bandwidth control by IP ◆Jumbo frame 9.6k Bytes ◆Management/configuration via WEB GUI, TELNET, console (CLI), Open Vision ◆LLDP protocol support

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆Wide operating temperature range (-40℃ to 70℃) ◆Dual system DC power input support (50 to 57VDC) ◆Compliant with IEEE 802.3at standard * 8x10/100/1000Base-T PoE (P.S.E.) ports, each port 30W / total 240W output. ◆O-Ring support * Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IEEE1588v2 clock synchronization support ◆IPV6 Internet Protocol support ◆SNMP v1/v2c/v3 & RMON & 802.1Q VLAN network management support ◆ModbusTCP protocol support ◆Network security HTTPS/SSH protocol support ◆IEEE802.3az EEE technology support ◆SMTP client compliance ◆Bandwidth control by IP ◆Jumbo frame 9.6k Bytes ◆Management/configuration possible via WEB GUI, TELNET, console (CLI), Open Vision ◆LLDP protocol support

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆Wide operating temperature range (-40℃ to 70℃) ◆Dual system DC power input support (12–57VDC) ◆Compliant with IEEE 802.3at standard * 8x10/100/1000Base-T PoE (P.S.E.) ports Each port outputs 30W / total 60W (12–24VDC) / 120W (24–57VDC). ◆O-Ring support * Ultra-fast non-stop ring / topology change protocol (recovery time: 30ms / 250 devices) ◆MSTP/RSTP/STP support ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IPV6 Internet protocol support ◆SNMP v1/v2c/v3 & RMON & 802.1Q VLAN network management support ◆ModbusTCP protocol support ◆Network security HTTPS/SSH protocol support ◆IEEE802.3az EEE technology support ◆SMTP client compliant ◆Jumbo frame 9.6k Bytes ◆Management/configuration possible via WEB GUI, TELNET, console (CLI), Open Vision ◆LLDP protocol support

• Routers, Switches, and Hubs
• LAN construction and wiring work

The IGPS-1411GTP series is an industrial 5-port unmanaged PoE gigabit switch equipped with 4×10/100/1000Base-T PoE (P.S.E.), 1×10/100/1000Base-T, and 1×100Base-FX/1000Base-X (SFP). It supports a wide temperature range of -40°C to 70°C, making it suitable for almost any operating environment. Due to its simple design that requires no configuration, it can be easily deployed in nearly all industrial network applications as a gigabit PoE Ethernet switch.

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 85℃) ◆4x10/100/500Base-T(X) P.S.E, 1x10/100/500Base-T(X) ◆Compliant with IEEE 802.3at standard ◆Wall mountable ◆DC power input 50–57VDC: TXPS-141XT-M12 12–57VDC: TXPS-141XT-M12-24V ◆Automatic speed detection / Automatic MDI/MDI-X

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

The "TES-250-M12" is an industrial-grade Ethernet switch compliant with the EN50155 standard, equipped with management functions that can withstand severe vibrations and shocks. It features a robust M12 connector suitable for demanding industrial applications. It supports a wide operating temperature range, ensuring stable operation even in harsh environments. 【Overview】 ■ High-speed redundant ring connection: O-Ring (recovery time <10ms / 250 units) ■ 5 ports × 10/100 Base-TX ■ Wide operating temperature range: -40℃ to 70℃ ■ Supports LLDP protocol ■ Supports STP/RSTP redundant protocols ■ Network management available using Windows utility (Open-Vision) ■ Automatic speed detection and automatic MDI/MDI-X ■ Supports store & forward and flow control ■ Wall mountable ◎ For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆Wide operating temperature range: -40℃ to 75℃ ◆Maximum extension of 300m with UTP cable ◆Maximum extension of 200m with 24AWG (non-UTP cable) ◆Automatic detection of 2/4/8 wires ◆Automatic configuration (automatic recognition of master/slave) & manual configuration via DIP switch possible. ◆Ethernet port: auto-sensing, full/half duplex operation ◆Redundant input power supply (12-48VDC) ◆Compliant with IP-30 ◆DIN rail and wall mount compatible ◆Mini size: 26.1mm(W) × 70mm(D) × 95mm(H)

• LAN construction and wiring work
• Other network tools

◆ 10GBase-T and 10GBase-R (SFP+) media converter ◆ Built-in frame counter, counts frame size/CRC errors/unicast, multicast, broadcast ◆ Supports digital diagnostic monitoring for SFP+ (DDM) ◆ Equipped with an out-of-band IP/SNMP management port on the back and a pin-type console port on the front ◆ 10G link aggregation function (LLF) ◆ Built-in TELNET/WEB browser management

• LAN construction and wiring work
• Other network tools

◆ 10GBase-R (SFP+) and 10GBase-R (SFP+) media converter ◆ Built-in frame counter, counts frame size/CRC errors/unicast, multicast, broadcast ◆ Supports digital diagnostic monitoring for SFP+ (DDM) ◆ 3R repeater function (Re-Amplification: amplitude amplification / Re-Shaping: waveform shaping / Re-Timing: timing regeneration) ◆ Supports all frame sizes including jumbo frames ◆ Equipped with an out-of-band IP/SNMP management port on the back and a pin-type console port on the front ◆ 10G link aggregation function (LLF) ◆ Built-in TELNET/WEB browser management

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range: [-40℃ to 85℃] ◆Supports 100M/1G/10G ◆Low loss (1.2dB) ◆Bypass switch time: < 10ms ◆Supports dual DV power input (12~48VDC) ◆IP30 enclosure ◆Slim design: 26.1(W) x 94.9(D) x 144.3(H) mm ◆DIN-Rail and wall mountable

• LAN construction and wiring work
• Other network tools
• Routers, Switches, and Hubs

L2+ Managed Gigabit Fiber Switch: FGS-2628KX is a next-generation Gigabit fiber switch equipped with 10Gbps uplink ports, in addition to full-size L2 features including L3 functions such as static routing. The FGS-2628KX features 20 Gigabit SFP ports, along with 4 Gigabit SFP/RJ45 ports and 4 10Gbps SFP+ ports, and supports AC/DC redundant power supplies. The device management system is designed to easily manage IP phones, IP cameras, and Wi-Fi access points for enterprise applications.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

◆Single fiber supports 40 channels of unidirectional/bidirectional multiplexing ◆Multiple different protocols can be used simultaneously for each channel ◆Effective utilization of dark fiber ◆No power supply operation ◆Height of 0.5U, adjustable front and back sliding ◆Uniform loss with AWG array waveguide ◆Low insertion loss ◆Gaussian type

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• Other network tools

◆ Single-channel with 40 waves of unidirectional/bidirectional multiplexing possible ◆ Multiple different protocols can be used simultaneously for each channel ◆ Effective utilization of dark fiber ◆ No power supply operation ◆ Height of 0.5U, adjustable front and back sliding ◆ Uniform loss with AWG array waveguide ◆ Low insertion loss ◆ Flat type

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• Other network tools

◆Wide operating temperature range (-40℃ to 75℃) ◆8×10/100/1000Base-T(X), 2×100/1000Base-X(SFP) unmanaged gigabit switch ◆Supports maximum 9.6k jumbo frames ◆Dual DC power input support (12–48VDC) ◆Flow control ◆IP30 enclosure ◆Automatic speed detection/automatic MDI/MDI-X ◆DIN rail and panel mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 75℃) ◆8×10/100/1000Base-T(X), 2×100/1000Base-X(SFP) unmanaged gigabit POE switch ◆Compliant with IEEE802.3at ◆Supports maximum 9.6k jumbo frames ◆Dual DC power input support 50–57VDC: IGPS-1082GP 12–57VDC: IGPS-1082GP-24V ◆Flow control ◆IP30 enclosure ◆Automatic speed detection / automatic MDI/MDI-X ◆DIN rail and panel mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work
• Other network tools

POI-2002 will be changed to POI-2002-V3 in the future. ◆ Compliant with IEEE802.3af ◆ Operating temperature: 0 to 45°C ◆ Built-in power supply type ◆ Excellent safety with surge protection ◆ Lightweight, compact design

• LAN construction and wiring work
• Other network tools

◆ Compliant with IEEE802.3af ◆ Operating temperature: 0 to 45°C ◆ Built-in power supply type ◆ Excellent safety with surge protection ◆ Lightweight, compact design ◆ Short circuit protection ◆ Automatic output voltage adjustment via DIP

• LAN construction and wiring work
• Other network tools

◆ Compliant with IEEE802.3af/at ◆ Operating temperature: 0 to 45°C ◆ Lightweight, compact design

• LAN construction and wiring work
• Other network tools

◆ Compliant with IEEE802.3af/at ◆ Operating temperature: 0 to 45°C ◆ Lightweight, compact design

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆10×10/100Base-T (including 2×100/1000Base-X combo ports), 2×100/1000Base-X (SFP) *10/100Base-T and combo managed Gigabit PoE switch ◆Dual DC power input support (24–36VDC) ◆O-Ring support *Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆Compliant with IEEE802.3af standard *Maximum output 120W (total for 8 ports) ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IPV6 Internet Protocol support ◆HTTPS/SSH protocol support ◆Traffic monitoring via RMON ◆DIN-Rail and wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆ Wide operating temperature range (-40℃ to 70℃) ◆ 1×10/100Base-TX auto-sensing/auto MDI/MDI-X ◆ Ethernet to fiber optic ◆ LFP (Link Fault Pass-through) function ◆ Full duplex/Half duplex ◆ Store and forward ◆ Easy configuration via DIP switch ◆ Reliable and robust IP-30 enclosure ◆ DIN rail and panel mountable ◆ RoHS compliant ◆ IEEE 802.3at PoE PSE compliant (only for IPMC)

• Other network tools
• LAN construction and wiring work

◆ Small size for 2 pieces of mmφ×nm ◆ Ready to use with SC relay connector. ◆ Continuous transmission test of 100Km possible by simply connecting <Set of 4 pieces at 25Km each>. ◆ Enables complete pre-testing within the company, significantly reducing on-site construction time.

• LAN construction and wiring work
• Other network tools

◆Wide operating temperature range (-40℃ to 70℃) ◆8×10/100Base-T(X), 2×1000Base-X(SFP) unmanaged switch ◆Supports three DC power input systems (2×12–48VDC), power jack (12–45VDC) ◆Flow control ◆IP30 enclosure ◆Automatic speed recognition/automatic MDI/MDI-X ◆DIN rail and panel mountable

• LAN construction and wiring work
• Other network tools
• Routers, Switches, and Hubs

The "NuStreams-700/-2000i" is a network measurement device that supports a wide range of interfaces including 40G (NuStreams-700)/10G Ethernet, Gigabit Ethernet, and 10/100Mbps, allowing for various types of testing. All slots are hot-swappable, enabling the replacement of test modules without turning off the power to the device. Additionally, testing can be conducted by operating the device from PC software configured with a chassis/interface module. Frames can be freely generated for each port/module, allowing for performance measurement from individual devices to the entire network. Other benchmark tests based on RFC can also be performed. 【Features】 ■ Intuitive utility software for monitoring system temperature and fan speed ■ All ports are hot-swappable ■ Synchronized testing between cards ■ Multi-user mode support (allowing multiple users to simultaneously use the chassis and modules) *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools
• Other measurement, recording and measuring instruments

◆ Ultra-high-speed non-stop ring/topology change (O-Ring recovery time: 10ms/250 units) ◆ Open-Ring functionality supports ring connection technologies from other vendors ◆ O-Chain technology enables multiple redundant ring connections ◆ Complies with international standard IEC62439-2 MRP (Media Redundancy Protocol) ◆ Supports Modbus TCP protocol ◆ STP/RSTP: 2004/MSTP compliant ◆ PTP protocol support: client clock synchronization ◆ IGMP snooping function for multicast communication ◆ Port trunking enables easy bandwidth management ◆ Supports SNMP v1/v2/v3 ◆ Network management supports SNMP v1/V2c/V3 ◆ RMON traffic monitoring function ◆ Security features with TACACS+ and 802.1x user authentication ◆ Wide operating temperature range (-40℃ to +70℃) ◆ Complies with RoHS

• Routers, Switches, and Hubs
• LAN construction and wiring work

The FRM220-4G-3R has four SFP+ slots that can be used as a dual-channel 16G 3R multi-rate transponder or in a protection mode function that allows for 1-to-2 port switching. This device supports various protocols such as 1G Ethernet, SDH STM-16, OC-24, OC-48, Fibre Channel 1/2, OBSAI, and CPRI, providing flexible transmission. By using dedicated CWDM or DWDM wavelengths SFP+, the 4G transponder supports multi-rate functionality with optical communication speeds ranging from 1Gbps to a maximum of 4.25Gbps. This capability makes the FRM220-4G-3R transponder suitable for use as a repeater for transmission over extended distances. Recent improvements in component performance have significantly enhanced power conditions and heat dissipation compared to previous transponders.

• LAN construction and wiring work
• Other network tools
• Routers, Switches, and Hubs

◆1×10/100Base-T(X) PoE P.S.E port ◆Compliant with IEEE802.3at/802.3af ◆Overvoltage input protection and automatic overcurrent output protection ◆Supports 12 ~ 57 VDC ◆M12 connector ◆Wall mountable

• LAN construction and wiring work
• Other network tools

◆ 1×10/100/1000Base-T PoE P.S.E port ◆ Compliant with IEEE802.3at/802.3af ◆ Overvoltage input protection and automatic overcurrent output protection ◆ Supports 12 ~ 57 VDC ◆ Maximum output 30W (50V / 600mA) ◆ M12 connector ◆ Wall mountable

• LAN construction and wiring work
• Other network tools
• Routers, Switches, and Hubs

◆Hot-swappable expansion slots x3 ◆Wide operating temperature range (-40℃ to 75℃) ◆12×10/100/1000Base-T, 2×100/1000Base-X (SFP) managed gigabit Ethernet switch ◆O-Ring support ※Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆MSTP/RSTP/STP support ◆IEC62439-2 MRP (Media Redundancy Protocol) compliant ◆IEEE1588v2 clock synchronization support ◆IPv6 Internet Protocol support ◆ModbusTCP protocol support ◆Network security HTTPS/SSH protocol support ◆IEEE802.3az EEE technology support ◆SMTP client compliant ◆Bandwidth control by IP ◆Jumbo frame 9.6k Bytes ◆Management/configuration via WEB, TELNET, console (CLI), Open Vision ◆LLDP protocol support

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆Wide operating temperature range (-40℃ to 75℃) ◆Dual system DC power input support (50 to 57VDC) ◆Compliant with IEEE 802.3at standard. Maximum output of 60W per port ◆O-Ring support ※Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 devices) ◆MSTP/RSTP/STP support ◆Compliant with IEC62439-2 MRP (Media Redundancy Protocol) functionality ◆IEEE1588v2 clock synchronization support ◆IPV6 Internet Protocol support ◆SNMP v1/v2c/v3 & RMON & 802.1Q VLAN network management support ◆ModbusTCP protocol support ◆Network security HTTPS/SSH protocol support ◆IEEE802.3az EEE technology support ◆SMTP client compliant ◆Bandwidth control by IP ◆Jumbo frame 9.6k Bytes ◆Management/configuration possible via WEB GUI, TELNET, console (CLI), Open Vision ◆LLDP protocol support

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆EN50155 10×10/100Base-TX Managed Switch ◆O-Ring Compatible ※Ultra-fast Non-stop Ring/Topology Change Protocol (Recovery Time: 30ms/250 Units) ◆IGMP v2/v3 (IGMP Snooping) ◆STP/RSTP Compatible ◆LLDP Protocol Support ◆Wall Mountable ◆IPv6 Compatible ◆TACACS+, 802.1x ◆HTTPS/SSH

• Routers, Switches, and Hubs
• LAN construction and wiring work

◆EN50155 compliant switch ◆Wide operating temperature range (-40℃ to 85℃) ◆16×10/100/1000Base-T(X) P.S.E, 4×10/100/1000Base-T(X) M12 connector ◆O-Ring compatible ※Ultra-fast non-stop ring/topology change protocol (recovery time: 30ms/250 units) ◆IEEE802.3at compliant ◆Management/configuration via WEB GUI, TELNET, Open Vision ◆SNMP v1/v2c/v3 Syslog network management support ◆VLAN, LLDP protocol support ◆Wall mountable

• Routers, Switches, and Hubs
• LAN construction and wiring work

The transmission port features detachable 8 pairs of multi-rate SFP/SFP+ ports, capable of transmitting up to 80G in a single-core/dual-core bidirectional configuration or 40G in two sets of single-core bidirectional using WDM. Optionally, high-density WDM filters and amplifiers can be added within the same chassis, enabling space-saving long-distance transmission. This allows for significant total cost reductions in fiber costs and network nodes. The transmission ports can be paired and used independently as 8 separate repeaters (media converters). *DCWDM2108 allows for mixed port configurations such as 1GE/OC48/10GE/OC192, but rate conversion is not possible. It is equipped with local and remote monitoring functions (SNMP/syslog) via LAN and OSC, as well as local monitoring through a serial console and office alarm contacts.

• VPN/Wide Area Ethernet
• Other network tools
• LAN construction and wiring work

The IGPS-9084GP-LA is a managed Gigabit PoE+ Ethernet switch for industrial networks, equipped with 8×10/100/1000Base-T and 4×100/1000Base-X (SFP), compliant with IEEE802.3at. It supports recovery protocols including STP/RSTP and vendor-specific redundancy protocols such as "O-Ring/Open-Ring/O-RSTP," protecting mission-critical industrial network applications from network interruptions and temporary malfunctions. It is an industrial Ethernet switch that can operate in a wide temperature range of -40°C to 70°C, making it suitable for almost any operating environment. It is one of the ideal choices for highly managed industrial network applications. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Routers, Switches, and Hubs

The IGS-9084GP-LA is a managed Gigabit Ethernet switch designed for industrial networks, equipped with 8×10/100/1000Base-T and 4×100/1000Base-X (SFP). It supports recovery protocols such as STP/RSTP and vendor-specific redundancy protocols like "O-Ring/Open-Ring/O-RSTP," protecting mission-critical industrial network applications from network interruptions and temporary malfunctions. With a wide temperature range of -40°C to 70°C, it is an industrial Ethernet switch capable of operating in almost any environment. It is one of the optimal choices for highly managed industrial network applications.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

The FRM220-40G-1Q4S is a 40G QSFP to 4x 10G SFP+ transponder that enables media conversion and extends transmission distances for 10G links over 40G. The FRM220-40G-1Q4S has been developed to meet the demands of data centers and enterprises that require high bandwidth. With the emergence of high-end servers and Ethernet switches equipped with 40G Ethernet interfaces, there is a need for media conversion (from multimode to single mode) and expansion of link range. The FRM220-40G-1Q4S is a hot-swappable card module with two slots, featuring one QSFP+ port and four SFP+ 1G transceiver ports. Installation is very simple and can be done using a plug-and-play method. The FRM220-40G-1Q4S is ideal for applications requiring QSFP+ or SFP+ when used with the FRM220-CH20 chassis.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

The FRM220-1000TS is a transparent type Gigabit media converter with low latency, featuring SFP ports for 1000Base-T to 1000Base-SX/LX/ZX. By housing it in a FRM220 series chassis equipped with an NMC, it can be used as a managed converter, or it can be housed as a standalone converter without management functionality. The SFP modules that can be inserted are not limited to LC types; SC types and various specifications such as multimode/single mode and 2-core/1-core can be selected according to the application. This media converter is fully transparent to Ethernet packets, supporting frames of any size, including small packets and jumbo packets (9K bytes). The LED indicators allow you to check the power status, UTP port speed/link, full/half duplex status, and the link and duplex status of the FX port.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

The SPL-101GT++-24V is a high-power PoE splitter for industrial networks equipped with 1×10/100/1000Base-TX. It supports a wide temperature range of -40℃ to 75℃, making it suitable for almost any operating environment. Its simple design, which requires no configuration, allows for easy integration into nearly all network applications. Despite its compact size, it can deliver a maximum output of 60W, making it one of the optimal choices for a wide range of industrial network applications.

• Other network tools
• LAN construction and wiring work

★For those in a hurry, please visit our online shop★ http://www.dci.co.jp/ ★Custom orders available upon consultation★ Optical patch panels are used in a set of two, installed in a 19-inch rack (1U/2U, etc.) between the line side and the indoor equipment side. They are used for line segmentation and changes to lines and equipment in facilities such as exchanges, data centers, broadcasting centers, and base stations that have numerous optical lines and optical communication/optical transmission devices.

• Converters and Transducers
• Other network tools

★For those in a hurry, please visit our online shop★ http://www.dci.co.jp/ ★Custom orders available upon consultation★ Optical patch panels are used in a set of two, installed in a 19-inch rack (1U/2U, etc.) between the line side and the indoor equipment side. They are used for line segmentation and changes to lines and equipment in facilities such as exchanges, data centers, broadcasting centers, and base stations that have numerous optical lines and optical communication/ transmission devices.

• Converters and Transducers
• Other network tools

● 1U size, 24 ports ● Cable hanger (removable) ● Adapters can be freely combined (optional)

• Other network tools
• Other network tools

The FRM220-10/100IS-D is a media converter from 10/100Base-TX to 100Base-FX. With its in-band management feature, it is ideal for applications such as metro LAN, campus, enterprise, and FTTx. It has an SFP (hot-swappable optical transmission module) slot, allowing for the replacement of optical modules while powered on, even in the event of a module failure. It can be used as an optical converter module in the FRM220-CH20 chassis, enabling remote management of various settings such as bandwidth control, duplexing, and speed, as well as monitoring the status of links and power through in-band management. Additionally, it is possible to manage the system collectively via a web GUI or SNMP using the separately sold FRM220-CH20 chassis and NMC.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

The FRM220-10/100IS-2 is a media converter that incorporates two completely independent media converters in one chassis, converting from 10/100Base-TX to 100Base-FX. With its in-band management feature, it is ideal for applications such as metro LAN, campus, enterprise, and FTTx. It has an SFP (hot-swappable optical transmission module) slot, allowing for the replacement of optical modules while powered on, even in the event of a module failure. It can be used as an optical converter module in the FRM220-CH20 chassis, and by using devices like the FRM220-10/100IS or FMC-10/100IS, remote management of converter bandwidth control, duplexing, speed settings, and monitoring of link/power status can be performed through in-band management. Additionally, with the separately sold FRM220-CH20 chassis and NMC, centralized management via WEB GUI or SNMP is also possible. It features a space-saving design that can accommodate up to 38 lines in a 2U size.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

Security companies that manage extensive private properties such as factories, research institutes, road companies, railway companies, airports, and ports need to centrally manage and monitor multiple surveillance cameras located in remote areas. The SF-SVxxRS-SC series analog video optical converter can multiplex video from multiple CCTV cameras from a monitoring center up to 20 km away, allowing for the distribution of video from up to 8 cameras to a remote DVR or each TV monitor without compression, at a maximum of 7.5MHz × 8 channels. Additionally, it comes standard with PTZ control via RS-232 (terminal block terminal), making it compatible with dome cameras. It is a simple optical converter that requires no complicated setup; just connect the coaxial cable and fiber optic cable, and it will operate immediately.

• VPN/Wide Area Ethernet
• Other network tools

◆CWDM wavelength compatibility ◆Unidirectional/Bidirectional communication possible ◆Effective use of dark fiber ◆No power supply operation ◆Ultra-compact/Ultra-lightweight ◆Magnet mount (dedicated magnet included as standard) -*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*- 【Demo units are available for loan】 ● I want to see the actual product before purchasing ● I want to test if it can be used before buying, etc. In response to customer requests, we have started a loan service for verification equipment. Please contact us if you are interested. -*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*-

• Other network tools