TOMITA CO.,LTD. List of Products and Services

The machine's overall dimensions can be adjusted from a depth of 4000mm x width of 3000mm x height of 1500mm to a maximum depth of 10000mm x width of 4000mm x height of 2500mm! It features a newly designed cross rail with heat countermeasures, equipped with four guide rails for the Z-axis, four guide rails for the Y-axis, and two guide rails for the X-axis. The spindle offers three types for rough to finishing processes and can be automatically exchanged. If you require high precision, want to shorten processing time, or aim to improve production efficiency, please consider this option. We have branches and distributors in various countries, so support is available worldwide.

• Other machine tools

Fast! Easy! Reliable! By using a shaft without screws, you can quickly complete tasks even if the width of the roll changes. Additionally, by using a taper cone, centering of the spool can be achieved, allowing for tightening that can apply high tension. ■Significantly reduces roll change time. ■Lightweight design makes it easy to handle, even for women. ■Operable with one hand and without tools. ■Easily applies high tension to round shafts (with specified hardness). ■Ideal for driving payoff shafts. ■Not dependent on the rotation direction of the shaft. ■Compact and symmetrical design. ■Maintenance-free. ■Can be installed with non-genuine taper cones; design information is available. *For CAD drawings, you can download in this site. Available in 2D (DXF) / 3D (STEP).

• Other machine elements

Ortlinghaus manufactures a full line of electromagnetic, pneumatic, hydraulic, and mechanical systems, specializing in high torque units and high heat applications, accommodating a wide range of torque. It is a benchmark company in the industry, used in various sectors such as industrial machinery like presses, ships, and construction machinery.

• Forging Machine
• clutch
• brake

This is a broaching tool for hexagonal hole machining. It eliminates the processes of hexagonal hole machining that were previously done by pressing or electrical discharge machining, thereby improving efficiency. We also accommodate special products such as multi-sided hole machining, Torx, square holes, and external hexagonal machining.

• Other machine elements

Revolutionary tool wear detection system. Available in two types for lathes and machining centers, equipped with servo motors and encoders, allowing easy condition setting and changes by connecting to a PC via USB port. Common features include: ■ Cycle time is fast at 90°, ranging from 0.13 to 0.9 seconds. ■ Adjustable tool contact pressure. ■ Memory for tool contact angle. ■ Long lifespan of 5 million cycles. ■ Both controller and scanner are compact. Features for lathes include: ■ Capable of detecting extremely small tools of 0.1mm. ■ Easy setup through simple teaching. ■ Can detect up to 2 tool positions. Features for machining centers include: ■ Tool wear detection possible without sacrificing machining time by installing in the tool magazine. ■ Capable of setting and storing configurations for up to 512 tools. ■ Compatible with Profibus and DeviceNet, allowing direct connection to the machine's NC device for reduced wiring and PC-less setup and adjustments (input from NC device).

• Other machine tools
• Other machine elements
• Other FA equipment

COMPOSITE PRO is a laser system designed to project polylines and outlines onto work surfaces and processed items! The projected laser lines are based on CAD data. It is used in many industries for tasks such as positioning during prepreg lamination, indicating machining positions for wood, marking for painting on large products like shipbuilding, and positioning for welding. 【Features】 ■ Projects polylines or outlines onto work surfaces, workpieces, molds, etc. ■ Generates projections based on CAD data, ensuring accurate scale representation. ■ Enables efficient work regardless of industry, material, or product. ■ The laser does not physically touch the workpiece, ensuring cleanliness. ■ Highest precision of ±0.06mm/m. ■ A more economical standard precision of ±0.2mm/m is also available. ■ Minimal and lightweight, making layout changes and installation easy. ■ The small galvanometer mirror allows for high-speed movement, reducing laser flicker. *For more details, please request documentation or view the PDF data available for download.

• Laser marker

To achieve higher precision, robustness, and durability, we have developed the "XtrAlign" series. The product lineup includes point lasers, line lasers, and cross lasers! Precision: The straightness of the laser in all products is ±0.05mm/m. Manual focus adjustment is possible, allowing for customizable line width when changing the installation position. Robustness: It features IP67 dust and water resistance. The housing is made of stainless steel. In impact resistance tests, it has passed the IEC62262 impact test, meeting the highest protection rating of IK10. Operating Power Supply: Compatible with DC12~30V, it can be powered from a distribution board. There is also a DC/AC power adapter available for powering from an outlet. Durability: Using diode lasers, it achieves a long lifespan of over 30,000 hours. It can be used in various industries such as tire manufacturing, woodworking, stone processing, and steelmaking. - In the tire manufacturing industry, it can be used for positioning rubber sheets on molding drums. - In the woodworking industry, it is used to precisely display the positions of different saw blade edges, enabling clean cuts.

• Other optical parts

This is a German-made high-speed 5-axis machining center. It uses a rack and pinion drive system, and is driven by two motors that constantly apply load, preventing wear and play like that seen in ball screws. By adopting the rack and pinion system, it offers: * A large gantry machining center with an X-axis travel of up to 40m. * Modular design allowing for production with a wide range of machine strokes. * In-house manufactured 5-axis milling head that can be selected based on processing needs. * High-speed feed of 60m/min and acceleration of 0.5G, reducing processing time. * High-speed spindle rotation of 25,000 min-1 to 30,000 min-1. * Special polymer concrete embedded in the side walls supporting the high rail gantry structure, achieving high rigidity, high damping, and low thermal displacement. This results in excellent processing capability, processing accuracy, and surface finish quality.

• Other machine tools
• Resin processing machine
• Textile Processing Machinery

The ETS and ETA collets are patented by Technopin and are compatible with HSK and ISO tool holders. The ETA collet is a higher precision type than the ETS collet, featuring a special shape and fewer cuts (grooves), which maintains very low runout and balance, enabling high-speed rotation (max. 100,000 rpm) while achieving high-precision machining.

• lathe
• Drill press

It has a maximum outer diameter of φ19mm and a length of 81mm, making it compact and easy to use. It operates on a power supply of DC4~6V, and uses an M8, 3-pin connection cable. The laser output ranges from 1mW to 30mW. The irradiation angle is also selectable. It uses a red diode (wavelength 635nm) and allows for manual focus adjustment, making it usable at a distance of 30mm. It has a straightness accuracy of 0.1mm/m and a protection class of IP54. Despite its high specifications with a lifespan of 30,000 hours, it is compact and lightweight (40g), making it easy to mount on equipment.

• Laser marker
• Lighting for image processing
• Laser Components

This line laser is equipped with a special lens, allowing it to project a long line from directly beneath the housing, even at a low installation height. The laser line is available in green and red. The operating power supply is DC 12-30V. It features a stainless steel housing with an IP67 protection class, and the laser has a lifespan of 30,000 hours. It meets IK10 standards for impact resistance. The straightness is 0.1 mm/m. It is used for positioning when placing workpieces and for guiding saw blades, among other applications. If you are in a harsh environment or want to reduce the frequency of replacing existing lasers, why not try the newly released HU laser line laser?

• Other optical parts
• Other machine elements
• Laser marker

The "FZH" is a horizontal machining center designed for the aerospace industry. It enables a highly efficient milling process when machining aluminum and composite materials. Furthermore, the patented M3ABC 3-axis milling head maximizes chip removal rates, significantly improving machining efficiency, especially when processing structural components of aircraft. 【Features】 ■ Innovative traveling column design ■ Highly efficient milling process ■ Standard equipped with pallet handling functions (automatic pallet changer) ■ Reliable pallet transport capabilities ■ Manufactured by Zimmermann *For more details, please refer to the PDF document or feel free to contact us.

• Machining Center

The "FZU" is an extremely compact 5-axis gantry-type machining center designed for machining aluminum, composite materials, plastics, and urethane. Thanks to its monolithic modular design, various machine variations with different lengths and heights can be selected, and a wide range of options such as coolant systems and MQL are available to meet customer needs. Furthermore, its highly flexible material handling and high processing surface quality and precision provide excellent cost performance for customers. 【Features】 ■ Compact ■ Newly developed robust center support portal structure ■ Adoption of thermal symmetry structure ■ Monolithic modular design ■ Made by Zimmermann *For more details, please refer to the PDF document or feel free to contact us.

• Machining Center

Revolutionary tool wear detection device. Available in two types for lathes and machining centers. Equipped with a servo motor and encoder, it allows for easy condition setting and changes by simply connecting to a PC's USB port. Common features include: ■ Cycle time is fast at 90°, ranging from 0.13 to 0.9 seconds ■ Adjustable tool contact pressure ■ Memory for tool contact angle ■ Long lifespan of 5 million cycles ■ Both controller and scanner are compact Features for lathes: ■ Capable of detecting extremely small tools of 0.1mm ■ Easy setup with simple teaching ■ Can detect up to 2 tool positions Features for machining centers: ■ Tool wear detection can be performed without sacrificing processing time by installing it in the tool magazine ■ Capable of setting and storing configurations for up to 512 tools ■ Compatible with Profibus and DeviceNet, allowing direct connection to the machine's NC device, enabling reduced wiring and PC-free setup and adjustments (input from NC device)

• Other machine tools
• Other machine elements
• Other FA equipment

It is a clamp unit that fixes spools, bobbins, rolls, colors, etc. on the axis, and can also be used for positioning, safety measures, and as a spacer. ■ Fixed with one action, released and removed with two actions ■ Rust prevention treatment with a self-locking mechanism ■ Inexpensive. * If additional tightening or centering is required, or if there are loads or vibrations, please consider "Easy Lock."

• Other machine elements
• shaft
• Power Transmission Equipment

The point, line, and cross laser series 【XrtAlign】 developed by LAP LASER (China) Co., Ltd. achieves a laser lifespan of 30,000 hours with an IP67 protection rating. The housing is made of stainless steel, featuring high dust and water resistance with an IP67 rating, and is shock-resistant, making it suitable for outdoor use. *It may be difficult to see under sunlight. It can be used even on rainy days. With an IP67 protection rating, it operates in harsh environments. Due to its low failure rate, it helps reduce running costs. Additionally, the newly developed green laser allows for output adjustment using a laser output controller, providing optimal laser line width and visibility. The straightness of the laser is 0.1mm. The green laser can adjust the laser line width and brightness using a separately sold output controller. It also allows for manual focus adjustment, so installation positions are not limited. Two types of power supply options are available: a DC power cable and a DC/AC power adapter. Furthermore, it can now be powered via USB, allowing for output from mobile batteries or PCs.

• Laser marker

- Achieves high rigidity with an innovative traveling column structure. - Significant reduction in processing time with simultaneous 6-axis machining using a compact simultaneous 3-axis milling head. - Comes standard with an original pallet changer that can exchange large pallets up to 4 meters in length in just 2 minutes. - Made in Germany by F. Zmmermann GmbH.

• Milling machine

Feeding device, guiding device, and reciprocating device using a plain shaft It converts the rotational motion of a round rod, which rotates at a constant speed and in a constant direction, into linear motion to obtain reciprocating motion. The round rod does not require a screw; linear motion can be achieved by pressing a tilted special bearing against it. Additionally, by changing the orientation of the bearing, the direction of motion can be altered even if the rotation direction of the shaft remains constant. These movements are analogous to the relationship between a screw and a nut, but the travel speed (pitch) can be freely set, and the direction of movement can be reversed at any position. ■ The pitch can be changed by altering the tilt of the bearing. ■ High-speed and smooth feeding can be achieved. ■ There is no backlash. ■ A safety mechanism allows the unit to slip in the event of an unexpected collision. ■ The contact-free lever can release the fixation with the shaft. ■ No control or dedicated power is required (power can be obtained from a parallel rotating shaft via a belt, etc.). ■ Bracketed and non-bracketed options are available as needed.

• Other machine elements
• shaft
• Power Transmission Equipment

The point, line, and cross laser achieves a laser lifespan of 30,000 hours. The housing is made of stainless steel and has a high dust and water resistance rating of IP67, as well as shock resistance, making it suitable for outdoor use. It is ideal for positioning and light cutting. 【Features】 ◆ Can be used even on rainy days. Dust prevention measures are also in place. ◆ Due to the low frequency of failures and replacements, running costs can be kept down. ◆ Two laser colors are available: red and green. ◆ With a shock resistance rating of IK10, it can be used even when mounted on moving parts. *Demo units are available for free rental. Please contact us for more details. You can download the catalog in PDF format to view it.

• Laser marker

This is a servo laser developed and released for the tire industry. It is unitized with a protection rating of IP54 and operates on a DC 24V power supply. The laser uses a diode laser with a lifespan of 30,000 hours, allowing for long-term use. If the laser source needs to be replaced, users can perform the replacement themselves, eliminating the need to remove it and return it to the manufacturer. The laser's movable range can be selected from 600 mm to 2,600 mm. The movement method can also be chosen as symmetrical or full range, and the number of lasers can be adjusted according to user specifications. This equipment is adopted by many tire manufacturing equipment manufacturers.

• Other assembly machines

Linear drive nut from Ewing Company (Germany: Joachim Uhing KG & Co. KG). It converts the rotation of a round shaft without threads into linear motion. By specially processing 3-4 bearings with an inner diameter slightly larger than the shaft diameter and arranging them alternately tilted against the shaft, it generates lead through line contact, achieving the same effect as a screw. - No threading required; linear motion is obtained from the rotation of the round shaft. - There is no backlash. - It slips under overload to protect the machine. It is used in the feed of measuring instruments such as three-dimensional measuring machines, door opening and closing mechanisms, and conveying devices. Options for special specifications such as pitch changes, direction changes, additional wipers, and additional free levers are available.

• Other machine elements
• nut
• Power Transmission Equipment

- Delivery time: Limited quantity, approximately 4 to 5 weeks!! - Price range: From 20,000 yen / 1,000mm Module 3 / High grade → Quality grade 6 (Cumulative pitch error: 36μm/1000mm) - Manufactured by Taiwan's YYC company - Rack and pinion capable of high-precision positioning Unlike ball screws, it allows for designs without length limitations - Combination of high-precision planetary gear reducer (backlash of 1 minute) and high-precision ground rack & pinion handled by Tomita achieves a maximum cumulative pitch error of 12μm/1000m - For even higher precision positioning, using a pinion-integrated high-precision planetary gear reducer in tandem allows for further reduction in backlash. - Low noise - When using helical gears, the load-carrying capacity increases by about 20% compared to spur gears. ⇒ Becomes one size more compact than conventional modules ⇒ Significant cost benefits - Proposal for long racks Variations of 500, 1000, 1500, 2000mm per unit ⇒ Recommendations for connection numbers ⇒ Improvement of positioning errors

• Power Transmission Equipment

This is a planetary gear reducer for servo motors that covers a range from low to high reduction ratios, made with stainless materials that can be cleaned. It can be widely used in food machinery, medical devices, cleaning equipment, and more. It is possible to fill it with food-grade biocompatible or low-volatility oil as an option.

• Gearbox

Optidress E by PG Technology Co., Ltd. The original was from PG Technology in the UK, but it is now manufactured by PG KOREA in South Korea due to a business transfer.

• Grinding Machine

Instructions for the arrangement of laminated wood and the placement of metal plates during truss assembly are projected onto the table surface in full size based on CAD drawings (such as .dxf or .iges). This leads to standardization of work, increased efficiency, and reduction of errors. The laser is Class 2M, which does not require protective glasses, ensuring safety for the operator. The laser color can be selected between green and red, with a laser lifespan of an industry-leading 30,000 hours. The projector's size and weight are W300 x L110 x H110 mm and approximately 3 kg, making it the smallest and lightest, allowing for easy setup and layout changes. - Positioning of structural laminated wood and metal plates - Direct projection of work procedures onto the workpiece - Can be mounted on ceilings or walls, and multiple projectors can be connected for use - Projection area is up to 80° x 80° - Alignment of jigs for CNC woodworking machines - Accurate positioning of prefabricated parts made of wood and concrete - Easy verification of alignment with CAD drawings by projecting after truss formation - Indication of placement for clamps and jigs - Improved accuracy by projecting cutting lines - Reduction of marking time

• Laser marker

At Ortlinghaus, we offer a wide range of products in various fields such as deck equipment, port equipment, construction machinery, and offshore applications, including: - Various types of wet or dry plates - Wet multi-disc hydraulic release spring pressure holding brakes or emergency brakes (safety brakes) - Wet multi-disc hydraulic-operated clutches - Wet or dry slipping/starting clutches - Rotary joints We can provide these products in a wide range of sizes. Additionally, we develop and manufacture unique lining plates optimized for each application, making us the only company with extensive experience not only in clutches and brakes but also in plates. We cover a wide torque range, from those that cannot be handled by electromagnetic brakes to the torque required for ultra-large machinery.

• clutch

The safety brake specifically designed for servo presses by Ortlinghaus has been developed at the request of a leading press manufacturer in Germany, with commercialization occurring in 2008. It has since undergone two model changes and is now in its third generation. With extensive experience in the press market, it is a safe, high-performance, and highly reliable product. <Features> - Spring-type brake adopted for safety - High durability and safety - Hydraulic release system for high torque, compact size, and fast response - Low moment of inertia - Adoption of dry lining plates to achieve zero drag torque - Sealed design that is less affected by the surrounding environment and does not release lining dust into the surroundings - Compliance with safety regulations in various countries - Low maintenance - Good maintainability due to modular design - Optional temperature sensors and stroke sensors - Can be supplied in combination with linear motion locks - Wide torque range (3,700 Nm to 125,000 Nm)

• clutch

Ortlingshaus offers a wide range of products in various sizes for applications such as tugboats, workboats, pleasure boats, fishing boats, offshore vessels, naval ships, and ferries, including: - Various types of wet plates - Wet multi-plate hydraulic clutches - Wet multi-plate hydraulic brakes - Wet multi-plate hydraulic release brakes - Self-contained slip clutch systems - Clutch hydraulic control units - Rotary joints and more.

• Power Transmission Equipment

3D Laser Projector Usage Instructions - Layering process of prepreg during CFRP production - Positioning of masking tape for painting large parts - Positioning of parts during truss formation in wood processing - Positioning of pipes and window frames when pouring concrete into molds in the concrete industry - Layout changes for furniture and appliances - As a substitute for marking work etc. Line Laser Usage Instructions - Projection of cutting lines - Positioning of forklift tines - Projection of pedestrian lines - As a light cutting tool - Checking the straightness of long pipes - Indicating the starting point for processing - Using a USB power cable significantly expands the range of applications etc.

• Laser Components

- Stover Company: A long-established gear reducer manufacturer in Germany. Please feel free to consult us if you are having quality issues with other products. - Atlanta Company: Supplies high-quality rack and pinion systems. Offers automatic gear lubrication systems at a low cost. - YYC: High quality and low cost. If you are having trouble with pricing, please consult us! - Sesame Company: Supplies washable gear reducers. [[Servosoft]] Simplifying the selection of gear reducers and servo motors! Software that allows selection from both domestic and international manufacturers. Generally, when selecting servo motors, larger motors are recommended to account for extra capacity, which can lead to a price disadvantage. However, by using Servosoft, you can instantly select the appropriate size. If you contact us for product inquiries, we will provide selection assistance free of charge!

• Power Transmission Equipment
• Other machine tools
• clutch

- A wide range of products that support high-speed light cutting of aluminum, resin, and composite materials, as well as heavy cutting of steel and machining of difficult materials such as titanium and Inconel. - A variety of in-house manufactured milling heads tailored to different machining applications. - Each axis stroke is selectable, allowing for the realization of an optimal machine size according to customer needs. - Numerous achievements in 5-axis machining of aircraft components worldwide. - The newly developed horizontal machining center FZH series is packed with features and is suitable for machining large aircraft components. - A compact simultaneous 3-axis milling head significantly reduces machining time. - Many achievements as a model machining machine in the automotive industry. - Direct support from the manufacturer through remote diagnostic services. - Rapid supply of spare parts.

• Flat/Shaped/Vertical Cutting Machine
• Other processing machines
• Other machine tools

We have been doing business with major domestic manufacturers for many years, so we can provide optimal proposals tailored to your usage conditions. 1) We supply wire, filter elements, ion exchange resins, supply dies, wire guides, water nozzles, rollers, etc. for wire electrical discharge machining. We also collect empty spools (some conditions apply). 2) For sinker electrical discharge machining, we supply oil filters (which we also collect), screw electrodes, and electrode materials in round and square shapes. 3) For small hole electrical discharge machining, we supply guides (from domestic manufacturers), small hole electrode tubes, and processing fluids. 4) As chemical products, we supply rust prevention additives, rust removers, cleaning solutions, etc. 5) We also supply molds, steel materials, carbide materials, aluminum materials, etc. 6) Finishing tools. 7) As consumables for injection molding machines, we supply a set of three screw tip parts, temperature control-related products, chucking parts, and tools for molding sites. Inquiry email address: information@tomitaj.co.jp Please copy and use the address.

• Electric discharge machine

Until now, with NC long-length processing machines and NC panel processing machines, operators have been inputting NC programs from the control panel while looking at drawings using interactive and G-code methods. By introducing this system, it is now possible to automatically create processing programs simply by importing 2D and 3D CAD data.

• 3D CAM
• 2D CAM
• Other CAM related software

This high-performance quick-release vacuum coupling and vacuum bag connector are designed for quick and secure attachment of vacuum hoses. The VC200 consists of two parts: male and female. When connected, it creates a high airtight seal and allows air to pass through. When removed, the internal valve automatically closes, preventing air leakage from one side of the coupling. The VC200 is custom-made for composite materials such as CFRP. It is also compatible with high-temperature and high-pressure autoclaves. The seals are made of silicone and PTFE, allowing use at temperatures up to 204°C/400°F. Extrusion molding machines and injection molding machines.

• Vacuum Equipment

To achieve higher precision, robustness, and durability, we have developed the "XtrAlign" series. The product lineup includes point lasers, line lasers, and cross lasers!! Precision: The straightness of the laser in all products is ±0.05mm/m. Manual focus adjustment is possible, allowing the line width to be set as desired when changing the installation position. Robustness: It features IP67 dust and water resistance. The housing is made of stainless steel. In impact resistance tests, it has passed the IEC62262 impact test, meeting the highest protection level of IK10. Operating Power Supply: It supports DC 12~30V, allowing power supply from a distribution panel. Power can also be supplied via USB. Durability: Using diode lasers, it achieves a long lifespan of over 30,000 hours. It can be used in various industries, including tire manufacturing, woodworking, stone processing, and steelmaking. - In the tire manufacturing industry, it can be used for positioning rubber sheets on molding drums. - In the woodworking industry, it is used to precisely display the positions of different saw blade tips, enabling clean shearing.

• Other optical parts

The processing machines come in six types, ranging from the neo with a movement range of 520*420mm (machine size: W805*D1,290*H1,880mm) to the ML cube with a movement range of 1,520*1,150mm (machine size: W2,410*D2,280*H1,950mm). They are designed based on ergonomic principles to enable quick and safe work setup. Additionally, DATRON's unique interface (touch panel) allows for high-speed and high-precision processing to be operated with a smartphone-like touch. They can efficiently process materials such as housing, aluminum, and composite materials like CFRP. Due to their space-saving and energy-efficient design, these machines are very economical.

• Milling machine

We have distributors in over 80 countries and local support is available. Our main industries include machine tools, food manufacturing, and the aerospace industry. There is no compatibility with other products for installation, but there is compatibility in product dimensions and specifications. If you are experiencing long lead times with other products, please contact us with the product model number. We will propose alternatives.

• Safety switch

Generate a fluid that vibrates left and right without using moving parts, thanks to a special structure inside the nozzle! This allows for reduced vibration and noise. Since there are no moving parts, maintenance is unnecessary, leading to a longer lifespan, and there is no need for electrical control or wiring connections. It can handle pressures up to 200 bar and is widely adopted in the car wash and high-pressure cleaning industries. It is also effective as a water nozzle or air nozzle for removing chips inside processing machines. With just one nozzle, you can use various fluids such as water, air, and coolant, making it very economical. Experience the effectiveness of chip removal using coolant (cutting fluid) by replacing existing spray nozzles (fan-shaped). It comes with screw connection sizes of R1/4” or 1/8”, and coupler specifications are also available. Custom products can be accommodated. By improving the chip removal rate and enhancing processing efficiency, it is possible to prevent scratches on processed products, extend the lifespan of cutting tools, avoid line stoppages due to chips, and reduce cleaning time. A demo unit is available for testing.

• Water Hydraulic Equipment

We offer various position sensors that cater to the mepress industry and the injection industry.

• encoder
• Sensors

Developed with the concept of small lot small-scale precision machining, this machine is optimal for high-precision and fine machining, including electrode and mold processing for electrical discharge machining. By combining with CNC indexing and rotary tables, a wide variety of machining can be achieved. Additionally, it can be equipped with options such as a fiber laser unit, making it a multifunctional machine capable of milling, laser drilling, welding, and laser marking on the machine. It also features a manual handle for versatile use. ■ Features - Achieves top-class spindle rotation speed as a small precision milling machine. - Supports fine machining with small-diameter tools, which can be exchanged with one-touch using a tool clamping device. - Adopts Mitsubishi Electric's M80V numerical control system to fully cover user needs. It has a compact size. ■ Main Specifications - Spindle end: BT30 - Maximum rotation speed: 20,000 rpm - Travel distance: X, Y, Z 250 mm - Table size: 500 x 270 mm - Feed speed: XY up to 12,000 mm/min, Z up to 9,000 mm/min - Tool size: φ1~10 mm The table size and other specifications can also be modified according to requests.

• Milling machine

Hybrid nozzle with straight jet + fan-shaped nozzle! While the fan-shaped nozzle disperses pressure and lowers it, the oscillating jet nozzle can inject a straight jet in a fan-like manner by using only the internal structure of the nozzle. As a result, it can spray over a wide area with the pressure of a straight jet, similar to a fan-shaped nozzle. Since it does not use any moving parts and vibrates left and right without power, the risk of failure is reduced, and its large flow path makes it less prone to clogging, allowing for long-term use. Intermittent operation to impact the work surface and quick switching operations of solenoid valves are unnecessary. This energy-saving nozzle can reduce water consumption by up to 40%. Additionally, it produces low vibration and noise, requires no maintenance due to the absence of moving parts, and does not need wiring connections since there is no electrical control. With just one nozzle, it can use various fluids such as water, air, and coolants, making it very economical. The screw connection diameter is only R1/4”, but custom products are also available. It eliminates the risk of metal contamination during the cleaning process. Currently, it only has a spray angle of 45° at a flow rate of 1.2L/min at 3 bar.

• nozzle
• Other cleaning machines