TOMITA CO.,LTD. Product Lineup

This is a planetary gear reducer for servo motors that covers a range from low to high reduction ratios, made with stainless materials that can be cleaned. It can be widely used in food machinery, medical devices, cleaning equipment, and more. It is possible to fill it with food-grade biocompatible or low-volatility oil as an option.

- Delivery time: Limited quantity, approximately 4 to 5 weeks!! - Price range: From 20,000 yen / 1,000mm Module 3 / High grade → Quality grade 6 (Cumulative pitch error: 36μm/1000mm) - Manufactured by Taiwan's YYC company - Rack and pinion capable of high-precision positioning Unlike ball screws, it allows for designs without length limitations - Combination of high-precision planetary gear reducer (backlash of 1 minute) and high-precision ground rack & pinion handled by Tomita achieves a maximum cumulative pitch error of 12μm/1000m - For even higher precision positioning, using a pinion-integrated high-precision planetary gear reducer in tandem allows for further reduction in backlash. - Low noise - When using helical gears, the load-carrying capacity increases by about 20% compared to spur gears. ⇒ Becomes one size more compact than conventional modules ⇒ Significant cost benefits - Proposal for long racks Variations of 500, 1000, 1500, 2000mm per unit ⇒ Recommendations for connection numbers ⇒ Improvement of positioning errors

Fast! Easy! Reliable! By using a shaft without screws, you can quickly complete tasks even if the width of the roll changes. Additionally, by using a taper cone, centering of the spool can be achieved, allowing for tightening that can apply high tension. ■Significantly reduces roll change time. ■Lightweight design makes it easy to handle, even for women. ■Operable with one hand and without tools. ■Easily applies high tension to round shafts (with specified hardness). ■Ideal for driving payoff shafts. ■Not dependent on the rotation direction of the shaft. ■Compact and symmetrical design. ■Maintenance-free. ■Can be installed with non-genuine taper cones; design information is available. *For CAD drawings, you can download in this site. Available in 2D (DXF) / 3D (STEP).

We would like to introduce the "Medium Pressure Oscillating Jet Nozzle" in the food industry. In the food industry, perfect cleaning is particularly necessary. However, this high demand poses challenges in terms of cleaning time, environmental protection, and running costs. While using rotating nozzles can improve cleaning efficiency, systems that use moving parts carry the risk of foreign matter contamination due to breakage, making them unsuitable for the food industry. Our oscillating jet nozzles can solve this problem. 【Features】 ■ Excellent cleaning capability ■ Improved work time efficiency ■ Energy saving, water saving, and electricity saving ■ Reduction in maintenance and replacement costs *For more details, please download the PDF or feel free to contact us.

The "MPX-CH" is a specially designed oscillating jet nozzle for cleaning intricate and detailed areas, specifically with the food industry in mind. Thanks to a meticulously calculated path design, it achieves oscillating jets without movable or rotating parts. This allows for improved cleaning capability while also ensuring the durability of flat fan nozzles. It is suitable for cleaning oil films that contain oils and proteins. 【Features】 ■ Ideal for the food industry ■ High-speed and high cleaning capability ■ Time savings and reduced running costs ■ Operating pressure: 1.6 to 6.0 MPa (16-60 bar) ■ Maintains a specified spray angle regardless of flow rate or pressure ■ No movable or wear parts, reducing maintenance frequency *For more details, please download the PDF or feel free to contact us.

Software that displays 3D CAD data of products on an iPad and overlays it with the actual object captured by a camera, allowing for comparison and discovery of discrepancies between the data and the physical item. Discovered discrepancies can be recorded in terms of location and condition through freehand drawing, and a photo report can be automatically generated. Key inspection points and areas that require special attention can be set in advance, and by displaying caution instructions on the screen, work time can be reduced. Until now, even visual inspections that required skilled labor can be performed with high accuracy with only minimal training. Typical applications: ✓ Large sheet metal parts ✓ Canned structures ✓ Large jigs - Used for inspections during processes, before shipment, and upon receipt. It helps to identify mistakes arising from forgotten part installations, processing omissions, positional differences, and mix-ups of drawing versions, thereby improving the accuracy of visual inspections and promoting labor-saving measures.

In the machinery assembly industry, accurate assembly and visual inspection are required to ensure product quality. Especially for large machines and products with complex shapes, mistakes such as forgetting to attach parts or missing processing can compromise the product's performance and safety. Twyn displays 3D-CAD data on an iPad and overlays it with the actual product to identify discrepancies between the data and the physical item, thereby improving the accuracy of visual inspections. The automation of freehand recording and photo reports also enhances the efficiency of inspection tasks. 【Usage Scenarios】 - Assembly inspection of large sheet metal parts - Assembly inspection of can structures - Assembly inspection of large jigs 【Benefits of Implementation】 - Improved accuracy of visual inspections - Reduced work time - Decreased inspection errors - Promotion of labor-saving measures

In the metal processing industry, particularly in welding inspection, maintaining quality and reducing inspection time are important challenges. Deficiencies in welding not only compromise the strength and safety of products but also lead to rework and increased costs. Twyn enables easy detection of misalignments and defects in welding by overlaying 3D-CAD data with the actual product. This improves inspection accuracy and allows for the establishment of an efficient inspection system. 【Usage Scenarios】 - In-process welding inspection - Pre-shipment inspection - Incoming inspection 【Benefits of Implementation】 - Early detection of welding deficiencies - Reduction of inspection time - Improvement in inspection accuracy

This is an image inspection device that accommodates various shapes from raw materials to finished products. It inspects for deviations in the direction of carbon fibers, gaps, twists, defects, foreign matter contamination, wrinkles, etc., and provides feedback, enabling inspections that do not rely on the human eye. We have three main types of products available: F-SCAN Standard: Suitable for inspecting low-curvature fiber surfaces. F-SCAN Compact: Suitable for inspecting high-curvature fiber surfaces due to its compact design. F-SCAN Wide: Suitable for inspecting raw materials and flat materials.

This is a device that adds heat to the measurement target and confirms changes in thermal conductivity using an infrared camera. By integrating the heat source and the camera, it has become compact and lightweight, making it suitable for field services and installation on robots. It can determine defects in CFRP and honeycomb internal structures without using X-ray inspection.