レイマック List of Products and Services

A compact and lightweight dual-lamp spot light with a diameter of 50mm × 50φ and a weight of 120g. It is suitable for situations that require spatial constraints, such as illuminating the tip of a robotic arm from medium to long distances. It is available in two types: narrow beam and wide beam. It emits light that is more than 1.4 times brighter than the small single-lamp spot light IHVA-SP series. With overdrive, it can emit light at approximately four times the brightness of steady light.

• Lighting for image processing

Compact spot lighting that can be installed in various environments. It is suitable for situations requiring small size, lightweight, and high power, such as illumination at the tip of a robotic arm. Available in two types: narrow beam and wide beam. It can emit light at approximately 3.5 times the brightness of steady light through overdrive. Please use the RBOX series when utilizing a DC12V output power supply or overdrive. Also, consider the high-brightness compact multi-light spot lighting IHSL-SP series.

• Lighting for image processing

Can be inserted into telecentric lenses and used as coaxial reflected illumination. Ideal for positioning in the manufacturing of LCDs, semiconductors, and electronic components. Various lineups available, including ultra-high brightness types and compact Type IV series to suit different applications. Please use the RBOX series when utilizing the DC12V output power supply of the IHV series or overdrive.

• Lighting for image processing

Small coaxial spot lighting Can be inserted into telecentric lenses and used as coaxial incident lighting. Ideal for positioning in the manufacturing of LCDs, semiconductors, and electronic components. Various lineups are available, including compact types and ultra-high brightness IHV series, tailored to specific applications.

• Lighting for image processing

Ideal for mirror work. It can be illuminated along the same axis as the camera axis using a half mirror. Inspection with specular reflection is possible, making it effective for checking fine surface scratches, printing, and text. It can be used for a wide range of applications, such as pattern inspection of substrates and measuring the pitch of connector pins.

• Lighting for image processing

Ideal for mirror surface work. A high-brightness version of the conventional pseudo-coaxial illumination IFV series. Perfect for workpieces that could not be used with the previous pseudo-coaxial illumination due to low brightness. The brightness is about 3 to 5 times that of the conventional model in white, and about 7 to 9 times in blue.

• Lighting for image processing

Straight pseudo-coaxial downlight illumination that achieves high brightness, high uniformity, and a compact housing. It is possible to illuminate and capture images along an axis perpendicular to the camera axis using a half mirror. Compared to IFVA, it reduces vertical space, achieving space-saving design. Inspection with direct reflection is possible, making it effective for checking fine surface scratches, printing, and text inspection. It can be used for a wide range of applications, including pattern inspection of substrates and measuring the pitch of connector pins.

• Lighting for image processing

It is possible to illuminate along the same axis as the camera axis using a half mirror. Improvements to the adopted half mirror have significantly increased the resolution compared to the IFVA series. Inspection using specular reflection is possible, making it effective for checking fine surface scratches, printing, and text inspection. It can be used for a wide range of applications, such as substrate pattern inspection and measuring the pitch of connector pins.

• Lighting for image processing

It is possible to illuminate along the same axis as the camera axis using a half mirror. Since inspection can be performed with specular reflection, it is effective for checking fine surface scratches, printing, and text. It can be used for a wide range of applications, such as pattern inspection of substrates and measuring the pitch of connector pins.

• Lighting for image processing

Uniform illumination for uneven and long workpieces. Inspection can be performed in a tunnel style while covering the workpiece with lighting. Universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Ideal for sharp edges of elongated workpieces. Sufficient light output is achieved even with indirect lighting. The LED mounting section is designed as a heat sink, allowing for use in constant light conditions.

• Lighting for image processing

It is possible to inspect the workpiece in a tunnel style while covering it with lighting. It is universally compatible with spherical, aspherical, uneven surfaces, and long workpieces. Of course, combinations of dome, low angle, and coaxial can be used for various applications depending on the combination of wavelengths. It is ideal for sharp edges of elongated workpieces. By adopting power LEDs, sufficient light output can be obtained even with indirect lighting. The LED mounting part is designed as a heat sink, allowing for use even in constant light.

• Lighting for image processing

16-segment illumination with 4 directions and 4 levels Flexible illumination is possible with 16-segment illumination in 4 directions and 4 levels. Even difficult-to-detect scratches and dents can be captured clearly. No need to select lighting based on workpiece shape.

• Lighting for image processing

The inner surface of the bowl is equipped with LEDs, allowing for strong illumination from all angles. Additionally, by attaching a diffusion dome as an option, it is possible to achieve strong diffused light that minimizes reflections on spherical workpieces. There are also types that allow for multiple rows of LEDs to be divided into several circuits vertically, enabling independent dimming. We also accept requests for the integration of coaxial downlighting separately.

• Lighting for image processing

Integrate coaxial downlighting with dome lighting. The dome-shaped multi-angle lighting combined with coaxial downlighting allows for uniform illumination of three-dimensional workpieces. Separate dimming is possible for the dome lighting and coaxial downlighting.

• Lighting for image processing

The blending of emission colors can be freely adjusted according to the inspection purpose. With a combination of three wavelengths—red, blue, and green—it provides full-color visible light illumination, covering a very wide wavelength range. Since each wavelength can be dimmed independently, subtle composite lighting colors are achievable.

• Lighting for image processing

The NEO series has been brightened and is now newly available! By utilizing the hemispherical inner surface reflection, it emits uniform diffused light, reducing halation that easily occurs with direct light on uneven or glossy surfaces, allowing for shadow-free, uniform images. It is possible to capture curved or stepped workpieces as flat images. A large dome with a maximum diameter of 350mm is adopted, making it capable of accommodating larger workpieces that conventional small dome lighting could not handle. Compared to the previous NEO dome lighting, the blue light output has increased by about four times, while the white and red light outputs have increased by about two times, enabling faster inspections.

• Lighting for image processing

The bright NEO series has been newly released with a lighter design! By utilizing a hemispherical inner reflection, it emits uniform diffused light, reducing halation that easily occurs with direct light on uneven or glossy surfaces, resulting in shadow-free, uniform images. It is possible to capture curved or stepped workpieces as flat images. Compared to the IDDA-KH series, it is up to 40% lighter.

• Lighting for image processing

Indirect lighting that illuminates from a low angle in four directions. By adopting a new type of LED and revising the optical design, the light output has significantly increased to 4 to 7 times compared to conventional products. The housing is made entirely of aluminum and has been designed for heat dissipation. The square-shaped light-emitting surface makes it ideal for printing inspections such as expiration dates.

• Lighting for image processing

Brighter and clearer A space-saving, lightweight, thin 8mm dome light without a camera window. It provides uniform illumination across the entire area. Compared to the conventional IFH series, it is about six times brighter, with improved uniformity and clarity. Even at close distances to the workpiece, imaging can be done without interference from troublesome reflections.

• Lighting for image processing

Ideal for replacing fluorescent tube backlights! Standard lineup from A4 to A1 sizes. Customizable luminous surface in 100mm increments from 500mm to 2,400mm. Achieves approximately 30% cost reduction compared to the IFPA series.

• Lighting for image processing

Large, uniform surface illumination compatible with camera imaging. The emission surface size can be created in 100mm increments from 200mm x 100mm to 500mm x 500mm. Two types of aperture sizes, φ35mm and φ55mm, are available to match the lens size, centered on the emission surface. It also supports detailed customization, such as changes to the aperture position and connector position.

• Lighting for image processing

Adopts power LEDs, large and high-brightness uniform lighting. Ideal for appearance inspection of large workpieces such as PET bottles. Can also replace large fluorescent lamp devices. Due to its special structure, no air attachment is required, and it features a fanless natural air cooling system. Since it uses a 100mm x 100mm substrate, other sizes can be produced in multiples of this dimension.

• Lighting for image processing

The IHM-V series features an even brighter narrow-angle illumination type high-brightness transmission lighting. It achieves chip-type transmission lighting that is low-cost, high-output, and lightweight. The model lineup includes five sizes of square approximate shapes ranging from small to large, as well as four sizes of rectangular shapes, totaling nine sizes. The available light colors are white, red, and blue. The narrow-angle illumination suppresses light spill, making it ideal for edge detection of cylindrical and glossy parts.

• Lighting for image processing

Adopting chip-type elements, achieving high output and lightweight design. By providing a φ40mm opening, imaging is possible through reflection rather than transmission. The product lineup includes three sizes of square approximate shapes, ranging from small to large. The emission colors available are white, red, and blue.

• Lighting for image processing

High-brightness transmission lighting evolved further from IHM. Chip-type transmission lighting achieves low cost, high output, and lightweight design. The product lineup includes 5 sizes of square-like shapes ranging from small to large, as well as 4 sizes of rectangular shapes, totaling 9 sizes.

• Lighting for image processing

High brightness and high uniformity thin surface-emitting backlight lighting suitable for a wide range of visual inspections. With chip LEDs arranged in high density, it offers higher brightness and uniformity than the IFL series. Available in various sizes, it can be produced in multiples of 30mm x 30mm. For large backlight lighting needs of 200mm x 200mm or larger, please consider the IFPA series.

• Lighting for image processing

By revising the structure of the light guide plate emission method, the height of the lighting has been reduced to 6mm or less (with the emission part at 5mm), making it even thinner than conventional products. It can be installed without worrying about the installation space of the device. The LEDs emit light from the surroundings, resulting in low power consumption. It can be used for a wide range of appearance inspections as backlight lighting. If the brightness of the IFLA series is insufficient, please consider the IHM series or IDHM series.

• Lighting for image processing

Slim and energy-efficient uniform surface lighting This surface lighting has a thickness of 7.2 to 8.2 mm. It maximizes the luminous area in the width direction, allowing for a wide luminous area even in narrow spaces of devices. It can be used for a wide range of appearance inspections as backlight lighting. If the brightness of the IFLB series is insufficient, please consider the high-brightness chip LED surface lighting IHMA series and IDHM series.

• Lighting for image processing

The lighting has an extremely small size of W26×D60×H11, yet features a direct lighting type with an angled downward light concentration. Despite its small size, it offers high brightness and uses a cylindrical diffusion plate to minimize LED element reflections. It is available in white, red, blue, and green, as well as near ultraviolet (405nm) and infrared. Customization of size and emission surface R is also possible. It can be driven by PWM power supply and strobe power supply.

• Lighting for image processing

Uniform illumination of glossy and uneven workpieces. The structure makes it difficult for LED elements to reflect on the workpiece, making it ideal for visual inspection of glossy workpieces like bottle openings. It is effective for uneven workpieces as well, as it provides uniform illumination with indirect light.

• Lighting for image processing

Uniform illumination of glossy and textured surfaces. This is indirect lighting using a light guide plate. By illuminating with indirect light, it is possible to reduce halation. The structure prevents direct visibility of the LED elements on the light-emitting surface, allowing for uniform illumination of glossy and textured surfaces.

• Lighting for image processing

Emphasizes unevenness with illumination from the horizontal direction. It can illuminate the workpiece from the side, making it effective for inspecting dents, engravings, and edges. A diffusion ring can be added later. It can also be used in combination with dome lighting.

• Lighting for image processing

Optimal for defect inspection and edge detection. The bullet-shaped LED element is mounted at a large tilt angle, gathering strong oblique light for close-range work with low-angle ring lighting. It can be used at close distances to the workpiece and is effective for three-dimensional recognition of edge chipping and unevenness. A diffusion ring can be easily screwed on to prevent reflections from glossy workpieces and elements.

• Lighting for image processing

Versatile ring type suitable for various appearance inspections. Conventional ring lighting with high-density mounted bullet-shaped LED elements. The inclination of the substrate efficiently concentrates light in the center. Diffusion plates and polarizers can be easily screwed on.

• Lighting for image processing

Ideal for φ16 telecentric lenses! Compact ring lighting optimized for φ16 telecentric lenses. Can be installed without worrying about space due to its slim design. Designed with an inner diameter of 16mm to fit the barrel diameter of φ16 telecentric lenses.

• Lighting for image processing

Flat direct ring lighting with bullet-shaped LED elements mounted on a flat surface. Compared to direct rings, it can illuminate a larger area with the same number of elements and allows for increased distance from the WD. Diffusion plates and polarizing plates can be easily screwed on.

• Lighting for image processing

The NEO series is now brighter and newly launched! NEO ring lighting with power LEDs implemented on a flat surface. With a wide directional range, it can illuminate a larger area than conventional products, making it ideal for inspecting large-sized workpieces. Compared to previous models, the blue light output has increased by about 4 times, while the white and red light outputs have increased by about 2 times. It also supports faster inspections.

• Lighting for image processing

The bright NEO series has been newly released with a lighter design! The NEO ring lighting features power LEDs mounted on a flat surface. With a wide directional range, it can illuminate a larger area than conventional products, making it ideal for inspecting large-sized workpieces. Compared to the IHRA series, it is up to 20% lighter. The reduced weight makes it perfect for applications with weight limitations, such as robot vision systems.

• Lighting for image processing

Simultaneous release of short-range and long-range illumination. The ring-shaped lighting of the B'C Line Lighting IDBA-LE series is suitable for various applications such as printing inspection of large workpieces. Like the B'C Line Lighting, it offers two types of light distribution characteristics tailored to specific applications. Its design is robust against vibration and shock, making it possible to install on movable parts like robotic arms.

• Lighting for image processing

A multi-channel model with flexible irradiation from 8 directions. By individually irradiating workpieces that are prone to halation from 8 directions and synthesizing the resulting images, it is possible to suppress halation during imaging. It is also ideal for appearance inspection of uneven workpieces.

• Lighting for image processing

Achieving lighting tailored to work shape and installation environment. The IMAR-D series, a half-split type lighting, enables inspection of appearance, printing, and defects from high angles to low angles and from fine positions with just one unit.

• Lighting for image processing

Multi-position ring lighting compliant with IP67 standards. Waterproof specification of the IMAR-D series. Available in two sizes: φ90mm and φ140mm. Offered in 12V and 24V specifications.

• Lighting for image processing

By changing the height, it can be freely adjusted for shooting. With just this one unit, inspections for appearance, printing, and defects can be performed from high angles to low angles, and from detailed positions. The universal ring lighting ensures that there are no gaps in the illumination area, regardless of the position from which it is illuminated. It achieves high brightness that supports high-speed inspections and high-magnification inspections while providing diffuse lighting. There are seven models available with outer diameters of φ55mm, φ80mm, φ110mm, φ130mm, φ160mm, φ200mm, and φ250mm. The light colors available are white, red, and blue.

• Lighting for image processing

Variable angle and individual dimming are completely flexible. Direct-type surface-emitting lighting with high-density mounted bullet-shaped LED elements on a flat surface. The IDBA series features four angle-adjustable bar lights on a single fixture, allowing for freely adjustable beam angles. Different colors and dimming can also be applied to each light-emitting surface. For applications requiring uniformity of the light-emitting surface or for glossy workpieces, please use a diffusion plate and polarizing filter to soften the reflection of the LED elements.

• Lighting for image processing

Widely usable for backlighting and oblique lighting. Direct-type surface-emitting lighting with bullet-shaped LED elements densely mounted on a flat surface. There are many variations available, including square and rectangular types in various sizes, beyond what is listed here. For applications requiring uniformity of the emitting surface or for glossy workpieces, please use a diffuser and polarizing plate to reduce the reflection of the LED elements.

• Lighting for image processing