レイマック Product Lineup

By connecting a resistor box to a controller with a 12V DC output or an overdrive controller, you can supply the appropriate current to illumination fixtures designed for current-variable controllers. Using an overdrive resistor box enables overdrive lighting, which can produce light several times brighter than normal lighting.

• Other lighting equipment

Can be used as coaxial epi-illumination by inserting into a telecentric lens. Ideal for positioning in the manufacture of liquid crystal, semiconductors, electronic components, etc. For use with DC12V output controller or overdrive, please use the RBOX series.

• Lighting for image processing

Uniform illumination of uneven and long workpieces. Tunnel-type inspection is possible while the workpiece is covered with illumination. Versatile for spherical, aspherical, uneven surfaces and long workpieces. Ideal for sharp edges of long and narrow workpieces. Sufficient light intensity can be obtained despite indirect light.

• Lighting for image processing

Thin and lightweight multi-position ring illumination. This multi-position ring illumination has optical characteristics similar to those of low-angle lighting, and is ideal for illumination from a short distance, such as from right beside or from a low angle. Sizes are φ80 mm, φ100 mm, φ140 mm, φ170 mm, and φ210 mm in outer diameter. White, red, and blue light-emitting colors are available.

• Lighting for image processing

A 1-channel analog constant-current controller for the IHV Series, IBF Series, IHVA-SP Series, and IHV-FX Series. Its ultra-compact design allows for installation even in tight spaces. It is extremely lightweight, weighing only 75 g. Constant-current control makes it suitable for use with high-speed shutters and line sensors. The IRCA-24 Series features an external control function.

• Other lighting equipment

LED light source device that replaces conventional halogen light source with energy-saving and long life. The use of LEDs as the light source saves energy, extends service life, and is easy to maintain. A control board that enables adjustment of light intensity in low-light ranges is included as standard equipment.

• Lighting for image processing

Wide Field of View with No Camera Opening ・The slim, space-saving design allows installation even where mounting space is limited. ・With no camera opening, the entire aperture can be used as the imaging area, enabling a wider field of view. ・Even when positioned very close to the workpiece, images can be captured without unwanted reflections obstructing the view. ・Protective covers and holders can be attached to both the workpiece side and the camera side, preventing damage caused by unexpected workpiece bounce or falling parts.

• Lighting for image processing

The “IDMU-OD Series” is an overdrive controller featuring a slim, compact design that supports future expansion. Its external trigger output function allows you to control not only the overdrive light emission in sync with inspection timing but also the camera’s shooting timing. Additionally, since it is equipped with programming capabilities, you can control multiple inspection stages simply by inputting a single trigger channel for the inspection timing into the control system. [Solving These Problems] ■ Setting up signal communication with external devices is time-consuming ■ We want a compact, embedded controller to minimize the size of the equipment as much as possible ■ When connecting multiple lights, multiple power supplies are required, making the wiring complicated [Features] ■ Supports up to 4 external trigger output channels ■ Dedicated programming software designed to be easy for anyone to use ■ Easily controllable from image processing software and other applications ■ Slim design achieved by incorporating the dimming volume control into an external unit ■ The controller is only 50 mm wide; even with four additional units (up to 20 channels), the total width is just 250 mm *For more details, please refer to the related links or feel free to contact us.

• Other lighting equipment

The forced air cooling achieves a high output of over 2.4 million lx. The light emission size is available in increments of 100mm up to 3,000mm.

• Lighting for image processing

B'C line lighting compliant with IP67 standards. Waterproof specifications of the IDBB-SE series. Compact design with a width of 25mm and a height of 25mm. Available lengths for the 12V specification range from 50mm to 400mm at 50mm intervals, and for the 24V specification from 100mm to 800mm at 100mm intervals.

• Lighting for image processing

Compact model of IDBA-LE S type Optical design equivalent to the wide-angle model of the IDBA-LE series. Compact design of 25mm x 25mm. The adoption of a movable nut makes it easy to meet the requirements of mounting fixtures. Installation can be adapted to the usage environment. Production of IP67 dustproof and waterproof models is also possible.

• Lighting for image processing

Illumination equipped with high-output UV LEDs optimized for phosphor excitation. The lineup includes Long Type and Short Type models with selectable irradiation distances. Standard wavelengths are 365 nm, 385 nm, 395 nm, and 405 nm, with other wavelengths available upon request. High-output UV ring Illumination with a new, improved design The IDHRC series offers 16 models: four types with emission wavelengths ranging from 365 nm to 405 nm in 10-nm increments; two types—the Long Type with a narrow-angle beam and the Short Type with a wide-angle beam; and two sizes—φ65 and φ100. Additionally, UV-compatible diffuser plates and transparent plates can be attached.

• Lighting for image processing

Lighting equipped with high-output UV LEDs optimized for phosphor excitation. The lineup includes Long Type and Short Type models, allowing you to choose the irradiation distance. Standard wavelengths are 365 nm, 385 nm, 395 nm, and 405 nm, with other wavelengths available upon request. The IDBC-CH Series of high-output UV bar lights, featuring a new design with enhanced functionality, offers four emission wavelengths ranging from 365 nm to 405 nm in 10-nm increments; two types—the Long Type with a narrow-angle beam pattern and the Short Type with a wide-angle beam pattern; and 64 variations across eight sizes with light-emitting surface lengths ranging from 75 mm to 600 mm in 75-mm increments. Additionally, UV-compatible diffuser plates and transparent plates can be attached.

• Lighting for image processing

The IWDV_24 series is a high-performance Constant Voltage Controller that supports large lighting systems with a DC 24V drive and a power consumption of 300W. By setting the output lower voltage, you can select an optimal dimming range according to the lighting, and external dimming control can be switched between Ethernet and parallel communication.

• Lighting for image processing

The 【SAG-30M2 series】 is a power supply that can overdrive the illumination of most standard LED lights from Imac using an external trigger signal. It supports illumination times ranging from 10 to 990μs through external triggers, achieving approximately four times the brightness compared to constant light through overdrive illumination. The size has been compacted compared to the conventional SAG series. Two models are available: analog 0-5V control and parallel 8-bit control.

• Lighting for image processing

【Features】 ● It is possible to select an appropriate lighting color to match the color of the workpiece or defect. ● The IMAR series allows for diverse illumination simply by changing the distance between the workpiece and the lighting. ● The IDDA-KH series can uniformly illuminate from all directions, enabling shadow-free imaging even for curved or uneven workpieces.

• LED lighting

Introducing 5 key features! ● Optimization of shooting timing In addition to dimming and turning the lighting on/off, synchronized control of trigger output to the camera is possible. ● High expandability There is a high degree of freedom in selecting the basic unit, with options available in 4ch/8ch specifications and 12V/24V output specifications, totaling four types. By connecting expansion units, it is possible to expand in 4ch/8ch units even with mixed 12V/24V outputs, allowing for a maximum of 40ch expansion. The control method is primarily based on LAN communication, with the possibility of manual control and parallel communication expansion through unit connections. ● Programming function With a trigger 1ch input at the inspection timing, multiple controls on the inspection stage are possible. The standard programming function allows for not only control of the output sequence from LAN communication but also output control, light emission time, delay time, and pattern output, as well as control of external trigger output. ● Space-saving design Designed for incorporation into control panels with DIN rail mounting, achieving a compact and space-saving design with a minimum unit width of 25mm. ● Supported interface standards Compatible with GigE Vision and GenICam (Generic Interface for Cameras), offering high versatility and compatibility with various inspection software, making machine vision setup easy.

• Lighting for image processing

By adopting "high-speed synchronized imaging" for workpieces that are difficult to inspect, such as cast markings inspection, gloss surface text inspection, handle surface marking and dent inspection, and fine scratch inspection, defects can be clearly identified. At Raymac, we offer a "High-Speed Synchronized Imaging Starter Kit" to easily achieve high-speed synchronized imaging. The set includes hardware, software, and algorithms, allowing for image analysis from the day of purchase. 【Contents of the Starter Kit】 ■ Split lighting ■ Controller (IDGB-PG series, IJS series) ■ I/O cable (ace or ace2 compatible cable) ■ Extension cable for split lighting ■ Image composition sample program (Note: Image processing software such as HALCON is required separately) *For more details, please refer to the related links or feel free to contact us.

• Image Processing Equipment
• Lighting for image processing
• Image Processing Software

The "IDMU-P series" is a dimming controller unit with a slim, compact design that allows for later expansion. With the external trigger output function, it is possible to control the ON/OFF of the lighting in accordance with inspection timing, as well as control the timing of camera shots. Additionally, it features a programming function, allowing for the control of multiple inspection stages by simply inputting one channel of trigger for the inspection timing. 【Problems it Solves】 ■ It takes a lot of effort to establish signal exchanges with external devices. ■ I want a compact embedded controller to reduce the size of the equipment as much as possible. ■ When connecting multiple lights, the power supply also becomes multiple units, making wiring complicated. 【Features】 ■ Up to 4 channels of external trigger output from a single unit. ■ A dedicated software for the programming function that is easy for anyone to use. ■ Easily controllable from image processing software and others. ■ Slimming down achieved by externalizing the dimming volume into a separate unit. ■ The width of the controller is only 25mm for the 4-channel type. *For more details, please refer to the related links or feel free to contact us.

• Image Processing Equipment
• Image Processing Software
• Lighting for image processing

Reimac Co., Ltd. has been manufacturing lighting products for industrial applications—such as image processing and inspection—since 1996,making it a “long-established” company in the LED lighting industry. As a pioneer in the industry, we have continued to develop products, resulting in an extensive lineup of industry-leading products. In addition, the company maintains in-house processing facilities, enabling it to specialize in custom manufacturing tailored to customer needs, including custom solutions such as segmented lighting, size modifications, and shape changes, as well as customized optical simulations. The 2026 Comprehensive LED Lighting Catalog is a 138-page publication featuring the 85 Series. This single volume makes selecting LED lighting easy. [Contents] ■ LED Features and Selection Methods ■ Line Lighting ■ Ring Lighting ■ Bar Lighting ■ Transmissive and Surface Lighting ■ Dome Lighting ■ Coaxial and Spot Lighting ■ Special Lighting ■ Controllers, and much more! *Please contact us if you would like a copy of the “Comprehensive LED Lighting Catalog.”

• Lighting for image processing

Raymac Co., Ltd. is an LED lighting manufacturer that has been producing lighting products for industrial applications such as image processing and inspection since 1996. We pursue image processing with an understanding that comes from being a lighting manufacturer. This time, we would like to introduce our "Desktop Inspection Device," which will be exhibited at the Image Sensing Expo 2023. The "Desktop Inspection Device" is a simple inspection device that can be controlled without a PLC and can be started at a low cost. It features an inspection mechanism and image processing software integrated within the device, making it easy to use even without specialized knowledge. It can be controlled from PC software, eliminating the need for a PLC, which helps keep the overall cost of the device down, making it easier to introduce image processing in workplaces that are looking to adopt it. 【You can see the Desktop Simple Inspection Device here↓】 Exhibition Name: Nagoya Robodex 2023 Dates: October 25 (Wed), 26 (Thu), 27 (Fri), 2023 Time: 10:00 AM - 5:00 PM Venue: Port Messe Nagoya Address: 2-2-7 Kanjo Futo, Minato Ward, Nagoya City, Aichi Prefecture, 455-0848 Access: About a 5-minute walk from "Kanjo Futo" Station on the Aonami Line.

• Other inspection equipment and devices

Achieves 1,000,000 lx with natural air cooling. *WD=50mm Using a dedicated power supply app, individual control is possible from a computer at 100mm intervals. The light-emitting sizes are available in a lineup up to 3,000mm at 100mm intervals.

• Lighting for image processing

Achieving astonishing brightness Lighting for line sensor cameras that achieves industry-leading light output with natural air cooling. With an original optical mechanism, it is standardly a parallel light type, and by attaching an optional condensing lens, it can easily be converted to a condensing type to increase light output. Available in sizes from 100mm up to 3,000mm.

• Lighting for image processing

Compact line lighting with reduced size, power consumption, and weight. Achieves compactness with high light output and uniformity. The shorter side of the housing becomes compact, allowing for illumination at angles closer to the light axis due to the expanded emission surface. The weight is also reduced to approximately 200g, achieving lightweight design simultaneously. The cable line has been improved for easier wiring management. It enables the construction of inspection lines in even narrower installation environments.

• Lighting for image processing

Achieving compactness with high light output and uniformity. The short side of the housing has been made compact, allowing for irradiation at angles closer to the light axis due to the expanded light-emitting surface. The weight has also been reduced to approximately 200g, achieving lightweight design simultaneously. The cable line has been improved for easier wiring management. It is now possible to construct inspection lines in narrower installation environments.

• Lighting for image processing

A high-performance linear lighting system that inherits the lighting technology developed so far while keeping costs to a minimum. Ideal for replacing fluorescent lighting for inspection. The emission sizes are available in 200mm intervals up to 2,400mm. Ensures a maximum brightness of over 100,000 cd/m².

• Lighting for image processing

The Brybackline lighting has evolved and is now available! It has been miniaturized and achieves high uniformity compared to previous models. The light colors available are white, red, and blue, and the lighting length can be selected in 100mm increments, up to a maximum of 1,800mm.

• Lighting for image processing

Achieving astonishing brightness Lighting for line sensor cameras that achieves industry-leading light output with natural air cooling. We offer two types: a high-brightness type (IDBC-LSR series) boasting 1.2 million lx and a high-uniformity type (IDBC-LSR-S series: 900,000 lx) that widely diffuses light. Note: The illuminance values listed are for reference only and do not guarantee product performance. The sizes for the high-brightness type and high-uniformity type are available in 100mm increments up to 3,000mm. The NEO series has been newly introduced with increased brightness!

• Lighting for image processing

High-uniformity half-pipe illumination compatible with long workpieces. ・LEDs are arranged on both sides inside the housing, allowing the illumination to be reflected and diffused by the diffusion dome to reduce reflections and shadows from the workpiece. ・The structure prevents direct reflections from the LEDs and achieves uniform illumination even on glossy or concave/convex surfaces. ・Unlike conventional dome-type lights, this design suppresses halation while maintaining strong diffused light, making it suitable for a wide range of applications. Provides high illuminance of 150,000 lx or more at LWD 10 mm when the power supply dimming is set to 100%. (reference value; not guaranteed) Available in 10 sizes, with aperture lengths ranging from 124 mm to 1024 mm.

• Lighting for image processing

A wide-type bar lighting that can emit light with brightness almost equivalent to the IDBA-LE series, which uses power LEDs, has a light-emitting surface width of 40mm, approximately twice the width of the IDBA-LE series (19mm), and can illuminate an area comparable to the two-row IDBA-LEH2 series. It has a wide beam angle of about 140 degrees, high uniformity of diffused light, and is less prone to uneven illumination. Two types are available: a high-brightness version ideal for direct illumination and a high-uniformity version optimal for backlighting.

• Lighting for image processing

A versatile bar lighting with high uniformity, smaller than IDBA-HM. Despite its compact body with a height of 30mm and a width of 25mm, it features a small bar lighting with a light-emitting surface width of 18mm. It is a versatile type with high diffusion and uniformity. We offer two types: a high-brightness version ideal for direct illumination and a high-uniformity version perfect for backlighting.

• Lighting for image processing

Wide bar lighting with a luminous surface of 102mm This wide-type bar lighting has the largest luminous surface width (102mm) among the bar-shaped lighting in the lineup. The luminous surface width is approximately four times that of the IDBA-LEH series and about 2.5 times that of the IDBA-HM series, providing a wide area of 102mm and achieving highly uniform illumination, making it ideal for backlight applications.

• Lighting for image processing

A wide bar lighting with the largest luminous surface width (102mm) among the lineup. The luminous surface width is approximately four times that of the IDBA-LEH series and about 2.5 times that of the IDBA-HM series, providing a wide area of 102mm and achieving highly uniform illumination, making it ideal for backlight applications. It operates on DC24V, making it easier to handle than the IDBA-FD series, and it can be used in the same environment as the IDBA-HM series and others.

• Lighting for image processing

Ideal for large-scale work and long-distance illumination! A new type of bar lighting that achieves approximately 3 to 4 times the performance of the conventional IDBA-LE series with unique optical technology. Available in S type for wide-angle distribution that can illuminate a large area at close range, and L type for narrow-angle distribution that can provide powerful illumination at long distances. The two-row type of the IDBA-LEH series offers even higher brightness.

• Lighting for image processing

Ideal for large-scale work and long-distance illumination! The new bar lighting, which achieves approximately 2 to 4 times the performance of the conventional IDBA-LE series with unique optical technology. We offer the S type with wide-angle light distribution for illuminating close distances broadly, and the L type with narrow-angle light distribution for powerful long-distance illumination. Please also consider the higher brightness two-row type IDBA-LEH2 series.

• Lighting for image processing

Large work and long-distance irradiation compatible! Light distribution characteristics can be selected according to work size and irradiation distance. Significant increase in light output achieved with power LEDs and optical systems. High brightness is maintained even at long-distance irradiation of over 1500mm. The use of movable nuts makes it easy to meet the requirements of mounting fixtures. Installation can be adapted to the usage environment. Light emission colors include white, red, blue, infrared, and ultraviolet, with irradiation types available in "S type" for wide coverage and "L type" for long-distance irradiation.

• Lighting for image processing

Compact model of IDBA-LE S type Optical design equivalent to the wide-angle model of the IDBA-LE series. Compact design of 25mm x 25mm. The adoption of a movable nut makes it easy to meet the requirements of mounting fixtures. Installation can be adapted to the usage environment. Production of IP67 dustproof and waterproof models is also possible.

• Lighting for image processing

B'C line lighting compliant with IP67 standards. Waterproof specifications of the IDBA-SE series. Compact design with a width of 25mm and a height of 25mm. Available lengths for the 12V specification range from 50mm to 400mm at 50mm intervals, and for the 24V specification from 100mm to 800mm at 100mm intervals.

• Lighting for image processing

With a very narrow slit of only 0.5mm width, it is ideal for use in optical cutting measurement methods and for detecting fine foreign objects. In addition to white, it is available in four colors: red, blue, and green, allowing for color selection that matches the target workpiece.

• Lighting for image processing

Widely usable for backlighting and oblique lighting. Direct-type surface-emitting lighting with bullet-shaped LED elements densely mounted on a flat surface. There are many variations available, including square and rectangular types in various sizes, beyond what is listed here. For applications requiring uniformity of the emitting surface or for glossy workpieces, please use a diffuser and polarizing plate to reduce the reflection of the LED elements.

• Lighting for image processing

Variable angle and individual dimming are completely flexible. Direct-type surface-emitting lighting with high-density mounted bullet-shaped LED elements on a flat surface. The IDBA series features four angle-adjustable bar lights on a single fixture, allowing for freely adjustable beam angles. Different colors and dimming can also be applied to each light-emitting surface. For applications requiring uniformity of the light-emitting surface or for glossy workpieces, please use a diffusion plate and polarizing filter to soften the reflection of the LED elements.

• Lighting for image processing

By changing the height, it can be freely adjusted for shooting. With just this one unit, inspections for appearance, printing, and defects can be performed from high angles to low angles, and from detailed positions. The universal ring illumination ensures that there are no gaps in the illumination area, regardless of the position from which it is illuminated. It achieves high brightness that supports high-speed inspections and high-magnification inspections while providing diffuse lighting. There are seven models available with outer diameters of φ55mm, φ80mm, φ110mm, φ130mm, φ160mm, φ200mm, and φ250mm. The light colors available are white, red, blue, green, and infrared.

• Lighting for image processing

Multi-Position Ring Illumination compliant with IP67 standards. Waterproof specification of the IMAR series. Available in two sizes: φ90mm and φ140mm. Offered in 12V and 24V specifications. The light colors available are white, red, blue, and green.

• Lighting for image processing

Achieving lighting tailored to work shape and installation environment. The IMAR series, a half-split type illumination, enables inspection of appearance, printing, and defects from high angles to low angles and from fine positions with just one unit. The light colors available are white, red, blue, green, and infrared.

• Lighting for image processing

A multi-channel model with flexible irradiation from 8 directions. By individually irradiating workpieces that are prone to halation from 8 directions and synthesizing the resulting images, it is possible to suppress halation during imaging. It is also ideal for appearance inspection of uneven workpieces. The light colors available are white, red, blue, and green.

• Lighting for image processing