いけうち（霧のいけうち） List of Products and Services

This system lowers the inlet air temperature of gas turbines (and other engines) by 2 to 4°C through the latent heat of vaporization of fine mist, thereby recovering the power output that decreases with the rise in outdoor temperature during summer. By conducting simulation analyses and evaporation experiments, it is possible to build a system tailored to the shape of the intake duct and operating conditions. 【Features】 - A one-fluid intake cooling system that sprays semi-dry fog - Cools the inlet air of gas turbines (GT), gas engines, and diesel engines by 2 to 4°C - Recovers power output that decreases due to rising outdoor temperatures in summer - Can be installed on existing equipment - Minimizes drain generation *For more details, please refer to the catalog or feel free to contact us.

This is a kiln shell cooling system that sprays fine mist with particle diameters (size of the mist) ranging from 10 to 100 μm, cooling the rotary kiln (internally heated rotary kiln) steel shell and controlling it within a certain temperature range, thereby extending the repair cycle (lifespan) of refractory materials. Since no unvaporized water is generated, it does not pollute the surrounding environment. Additionally, it is possible to conduct simulation analysis to calculate the cooling effect in advance. 【Features】 - Rotary kiln shell cooling system that sprays fine mist - Achieves the extension of the kiln shell and refractory brick lifespan through cooling - No issues arise from overcooling or insufficient cooling, which can occur with other cooling methods (water cooling, stationary fan ducts, local fans) - Minimizes the generation of drainage - Consistently implements on-site surveys, layout design, construction, and aftercare *For more details, please refer to the catalog or feel free to contact us.

This is an air fin cooler cooling system that can reduce water usage by 40-80% compared to traditional sprinkler irrigation systems by spraying fine mist. It eliminates wet scaffolding by reducing drainage. It can be installed while the equipment is in operation, and we can propose a cooling system tailored to each site. 【Features】 - Air fin cooler cooling system that sprays fine mist - Reduces water usage by 40-80% compared to sprinkler irrigation - Eliminates wet scaffolding and improves the working environment by reducing drainage - Can be installed while the equipment is in operation - Supports installation at the bottom or top of the fins *For more details, please refer to the catalog or feel free to contact us.

The "Exhaust Gas Cooling System" from IKEUCHI Corporation selects suitable nozzles that meet various conditions such as required water volume, required particle diameter, and injection angle, based on years of accumulated experience and achievements, and simultaneously proposes an appropriate nozzle layout. Our product contributes to cost reduction by reducing air consumption through an energy-saving design with an air-to-water ratio of 130. Additionally, it demonstrates excellent atomization performance even at high flow rates, and its compact design has achieved lightweight construction. 【Features】 ■ High precision control of outlet temperature ■ Suitable nozzle layout ■ Stable injection from high to low water volumes *For more details, please refer to the catalog or feel free to contact us.

The "Body Cooling System" of IKEUCHI Corporation rapidly cools the body, bogie, and bumper by spraying fine mist of dry fog and semi-dry fog, and is a non-drain cooling system. By switching from fan cooling, the cooling time is significantly reduced, and it is also possible to suppress the temperature rise on the production line, thereby reducing air conditioning power consumption. Constructed with sensors, control devices, and water treatment equipment, it achieves the desired temperature. 【Features】 ○ Non-drain body cooling system that sprays dry fog and semi-dry fog ○ Enables rapid cooling without wetting by instantaneously evaporating the mist on the surface of the target object ○ Solves the issue of insufficient cooling capacity, which is a challenge of air cooling methods ○ Simulations are conducted before equipment installation to confirm cooling effects in advance ○ Constructs the optimal cooling system based on the temperature of the target object and its purpose *For more details, please refer to the catalog or feel free to contact us.

The "Solid Cooling System" of IKEUCHI Corporation uses mist such as dry fog (ultrafine mist) and semi-dry fog (fine mist) with particle sizes of 10 to 30 micrometers to cool objects without wetting them. The mist sprayed is extremely fine, so it evaporates before it can wet the object, and the heat of vaporization lowers the temperature of the object, providing cooling. This system resolves the issue of "wetting" associated with water cooling and improves cooling efficiency. 【Features】 - Measures against cooling unevenness and wetting - Dust suppression effects, improving the working environment - Energy-saving effects and cost reduction *For more details, please refer to the catalog or feel free to contact us.

In heat exchange mechanisms and power generation equipment that utilize outside air, efficiency decreases during the summer due to rising temperatures. The "intake cooling system" cools the air at the intake and just before the gas turbine, lowering the intake temperature and recovering about 3% of output. We also propose systems that enhance the heat exchange rate in air fin coolers and condensers, allowing them to demonstrate their effectiveness. *We have a wide range of systems using other spray nozzles as well. For quotes and custom solutions, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are also available at any time.