H. IKEUCHI & CO., LTD. Product Lineup

The "Yamagata Distribution Nozzle VV" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. It is a fully metal three-part nozzle consisting of a spray tip, cap, and adapter, allowing only the worn spray tip to be replaced. The strainer is standard equipment for small spray products and is also removable. 【Features】 ○ Yamagata distribution nozzle ○ Disassemblable ○ Fully metal three-part design ○ Uniform flow distribution across the entire width ○ Strainer is standard equipment for small spray products For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle V" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a three-part nozzle that uses ceramic in the spray chip nozzle section, consisting of a spray chip, cap, and adapter, allowing only the worn spray chip to be replaced. 【Features】 ○ Disassemblable Yamagata distribution nozzle ○ Ceramic used in the spray chip nozzle section ○ Strainer is standard equipment for small spray volume products and can be removed ○ The cell team consists of ceramic and resin spray chips → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle VVP" can generate a fan-shaped spray with a Yamagata flow distribution that is strong in the center and gradually weakens towards both ends. When using multiple nozzles in an array, overlapping the patterns at both ends will result in an even flow distribution across the entire width. It is a simple integrated nozzle made of either all metal or all resin, which is directly screwed into the pipe body. A strainer (available only for metal body products) is standard equipment for small flow products and can be removed. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ All metal or all resin construction ○ Even flow distribution across the entire width ○ Strainer standard equipment for small flow products For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a simple integrated nozzle that uses ceramic at the nozzle tip and is directly screwed into the pipe body. The strainer (for metal body products only) is standard equipment for small flow products and can be removed. 【Features】 - Ceramic is used at the nozzle tip of the main body - Simple integrated nozzle - Strainer is standard equipment for small flow products and can be removed - The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle UVVP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. It is made of ultra-high molecular weight polyethylene, which offers excellent wear resistance. Its unique structure ensures a long lifespan, providing stable performance as a spray polishing nozzle for extended periods. This is a simple integrated nozzle that is directly screwed into the pipe body, making it ideal for use in industries such as machinery and electrical electronics. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of ultra-high molecular weight polyethylene ○ Long lifespan achieved through unique structure ○ Stable performance as a spray polishing nozzle For more details, please contact us or download the catalog.

The "Wedge-Shaped Distribution Nozzle (Thin Type) CVVP" can generate a fan-shaped spray with a wedge-shaped flow distribution that is strong in the center and gradually weakens towards both ends. The material is S303 or S316. It features a fully threaded outer circumference for easy wall embedding in a one-piece structure. This coin-shaped nozzle is designed to be extremely thin, allowing it to be screwed into a shower pipe without protruding from the outer surface of the pipe, making nozzle arrangement in tight spaces easy. 【Features】 ○ Wedge-shaped distribution nozzle (thin type) ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Coin-shaped with an extremely thin nozzle thickness ○ Easy nozzle arrangement in tight spaces ○ One-piece structure that allows for wall embedding For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle INVV" can generate a fan-shaped spray with a flow distribution that is strong in the center and gradually weakens towards both ends. The nozzle can be easily attached and detached with a one-touch mechanism that allows for approximately 60° rotation, reducing maintenance time. It features a two-part nozzle consisting of the nozzle section and the adapter section. Made of polypropylene resin, it excels in chemical resistance and heat resistance. The nozzle body can be color-coded according to the spray flow rate. 【Features】 ○ One-touch standard fan-shaped/single-touch nozzle ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Excellent maintenance with easy attachment and detachment ○ Made of polypropylene resin ○ Excellent chemical resistance and heat resistance For more details, please contact us or download the catalog.

This is a self-cleaning spray nozzle that opens wide when the spray pressure is reduced to a certain level, allowing it to expel foreign objects that may be clogged in the nozzle. It can remove foreign objects simply by adjusting the operating pressure, reducing the need for manual cleaning or nozzle replacement, and minimizing machine downtime. It is utilized in processes that frequently experience clogging during cleaning or in processes that use circulating water. There are two types available: a fan-shaped type that sprays evenly across the entire spray width when arranged in multiple rows, and a straight type that powerfully cleans dirt and contaminants from the target area. *We also have a wide range of other spray nozzles available. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are always available.*

The "Yamagata Distribution Nozzle (with Control Mechanism) SO-V" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The internal piston moves up and down with control air, allowing for ON/OFF spraying. It is less prone to dripping and enables responsive spray control. Additionally, it is ideal for use in industries such as machinery, paper, pulp, printing, and food. 【Features】 ○ Generates a fan-shaped spray with Yamagata flow distribution ○ Spray pattern that is strong in the center and gradually weakens towards the ends ○ Less prone to dripping ○ Enables responsive control ○ ON/OFF spraying possible with control air For more details, please contact us or download the catalog.

The "Yamagata Distribution Nozzle (with Flexible Joint) UT+VP" can generate a fan-shaped spray with a Yamagata flow distribution, where the center is strong and gradually weakens towards both ends. The VP nozzle with a ball joint is integrated with a ball for direction change, allowing the spray direction of the nozzle to be adjusted to less than 40°. It consists of a nozzle, cap, and adapter, with the nozzle's outlet made of ceramic. 【Features】 - Generates a fan-shaped spray with Yamagata flow distribution - Spray pattern is strong in the center and gradually weakens towards both ends - Spray direction of the nozzle can be adjusted to less than 40° - The nozzle's outlet is made of ceramic - Composed of a nozzle, cap, and adapter For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle VE" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is a three-part nozzle that uses ceramic in the spray tip. It consists of a spray tip, cap, and adapter, allowing for the replacement of only the worn spray tip. The strainer is standard equipment for small flow products and can also be removed. 【Features】 ○ Generates a fan-shaped spray with an even flow distribution ○ Uniform flow distribution spray pattern across the entire area ○ Replaceable nozzle tip when worn ○ Uniform impact force per unit area ○ Strainer is standard equipment for small flow products and can be removed For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle VEP" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip section. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan-shaped spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle using ceramic in the tip section ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle (High Pressure Specification) VNP" is a uniform sector spray nozzle that generates an even flow distribution across the entire spray pattern. It is designed in a 1/8 size for high-pressure cleaning. The nozzle body features a monolithic design with a ceramic tip. It is ideal for high-pressure cleaning applications such as automobiles, vehicles, containers, tanks, paper felts, wire cylinders, filter presses, and industrial cleaning or degreasing. 【Features】 - Even flow distribution spray pattern across the entire area - 1/8 size designed for high-pressure cleaning - Uniform distribution nozzle - Monolithic nozzle with a ceramic tip - Ideal for use in industries such as paper, pulp, printing, food, and transportation For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle (Ultra High Pressure Specification) DSP" is a rare and powerful fan-shaped nozzle designed specifically for cleaning, generating a fan-shaped spray with an even flow distribution and a thin, strong impact like a sharp razor blade. It features a one-piece nozzle body with a ceramic material at the nozzle outlet, providing powerful cleaning capabilities. The ceramic chip has a circular shape from the inlet to the throat and gradually narrows to a flat inner hole shape from the throat to the nozzle. 【Features】 - Even flow distribution spray pattern across the entire area - Rare and powerful fan-shaped nozzle for cleaning - Ultra high pressure specification for high-pressure cleaning - Thin and powerful impact like a razor blade - Strong cleaning power For more details, please contact us or download the catalog.

The "Wide Angle Fan-Shaped Distribution Nozzle YYP" is a wide-angle fan nozzle that generates a wide-angle fan spray at low liquid pressure. It sprays at an angle of 75° relative to the nozzle axis. Compared to other types of fan nozzles, it has rough atomization performance, spray pattern, and flow distribution, but its structure is less prone to clogging. It is an integrated nozzle made of either all metal or all resin, suitable for use in industries such as steel, electronics, and food. 【Features】 - Generates a wide-angle fan spray at low liquid pressure - Structure that is less prone to clogging - Sprays at an angle of 75° relative to the nozzle axis - Integrated nozzle made of all metal or all resin For more details, please contact us or download the catalog.

The "Wide Angle Uniform Distribution Nozzle (Ultra Low Pressure Specification) LYYP" is a wide-angle fan-shaped nozzle that achieves a wide angle and uniform flow distribution at ultra-low liquid pressure (0.015 MPa). It is a small flow type with a soft impact that does not create spray bubbles, and all products are treated to be oil-free. It is ideal for applications such as spraying developer solutions in semiconductor manufacturing equipment, micro-spraying in chemical manufacturing processes, and spraying chemical solutions onto surface-treated steel plates. The material is PVC, and it is an all-plastic integrated nozzle. 【Features】 - Generates wide-angle and uniform fan-shaped spray at ultra-low liquid pressure - Small flow type with a soft impact that does not create spray bubbles - All products are treated to be oil-free - All-plastic integrated nozzle For more details, please contact us or download the catalog.

The "Eccentric Uniform Distribution Nozzle OVVEP" generates an eccentric fan-shaped spray from the nozzle axis, allowing for an even flow distribution across the entire spray pattern. It eliminates spray liquid accumulation when multiple nozzles are arranged. This integrated type does not require diagonal mounting of the nozzle. The material is S303 or B (brass), and it is a fully metal integrated nozzle. It is ideal for use in industries such as steel, electronics, paper, pulp, printing, food, and agriculture, forestry, and fisheries. 【Features】 - Eccentric spray pattern with uniform flow distribution across the entire area from the nozzle axis - Eliminates spray liquid accumulation when multiple nozzles are arranged - Integrated type that does not require diagonal mounting of the nozzle - Fully metal integrated nozzle - Material is S303 or B (brass) For more details, please contact us or download the catalog.

The foamy spray penetrates dirt and provides thorough cleaning. It is particularly effective in food manufacturing environments where stubborn stains from grease, proteins, and seasonings occur, making it ideal for cleaning conveyors and floors. The white, voluminous foam allows for easy visibility of the cleaning area, making it simple to check for any missed spots visually, which is essential in environments requiring strict hygiene management. Additionally, the foam is less likely to disperse compared to liquids, minimizing the impact on workers and surrounding equipment. We offer spray nozzles in the flat spray "AWVV" series and the straight spray "AWCC" series. Furthermore, we also have a cart-type foam cleaning unit "AWACart" available in gun-type and run-type configurations. *We have a wide range of other spray nozzles available. For quotes or custom requests regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.

The "Wide Width Uniform Distribution Nozzle WVVEP" is a single-fluid wide-width uniform fan-shaped nozzle capable of covering a large area with strong impact force. It has a large foreign object passage diameter and a simple structure that is less prone to clogging. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness. The spray pattern is strong in the center and gradually weakens towards the ends, resulting in a wide spray thickness. The ratio of the width to thickness of the spray pattern is 3 to 4:1. It is ideal for roll cooling, thick plate and hot-rolled steel plate cooling, and slab cooling. 【Features】 ○ Wide spray thickness pattern ○ Reduction in the number of nozzles, achieving water savings ○ Wide-width uniform fan-shaped nozzle ○ Large foreign object passage diameter and less prone to clogging ○ Strong impact force and strong cooling capability For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle (High Turn Down) VVEP-HL" is a high turn down single fluid uniform fan nozzle that maintains a consistent spray even with changes in pressure, resulting in minimal variation in spray angle. It is particularly effective when precise control at low flow rates is desired. With a wide range of flow adjustment (turn down ratio), it is ideal for applications that require increasing or decreasing the flow rate based on the target. It features a spray pattern with uniform flow distribution across the entire area and a structure that allows for control at low flow rates. 【Features】 ○ High turn down single fluid uniform fan nozzle ○ Uniform flow distribution spray pattern across the entire area ○ Minimal variation in spray angle when changing spray pressure ○ Structure that allows for control at low flow rates ○ Suitable for applications that utilize varying spray flow rates For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle (High Turn Down) DDRP" is a fan-shaped nozzle that provides an even flow distribution with a wide spray thickness across the entire area. It has minimal variation in spray angle and a large foreign object passage diameter, making it resistant to clogging. This is a simple integrated nozzle that is directly screwed into the pipe body without an internal whirler. It can cover a wide area due to its strong impact force, and there is no variation in spray angle even at a turn down ratio (throttle ratio) of 1:3. 【Features】 ○ Fan-shaped nozzle with a wide spray thickness ○ Covers a wide area due to strong impact force ○ No variation in spray angle even at a turn down ratio of 1:3 ○ Large foreign object passage diameter, resistant to clogging ○ Simple integrated nozzle that is directly screwed into the pipe body For more details, please contact us or download the catalog.

The "Uniform Distribution Nozzle (Air Suction Type) EJVV" is an air suction type fan-shaped nozzle that provides a uniform spray pattern with a wide flow distribution throughout its entire area. Compared to standard fan-shaped nozzles, it has a greater spread in the direction of spray thickness, with a width-to-thickness ratio of 3 to 4:1. The foreign object passage diameter and average particle diameter are slightly larger than those of standard fan-shaped nozzles, and when multiple nozzles are arranged, overlapping the patterns at both ends results in an even flow distribution across the entire width. 【Features】 ○ Uniform spray pattern with a wide flow distribution throughout the entire area ○ Width-to-thickness ratio of the spray pattern is 3 to 4:1 ○ Greater spread in the direction of spray thickness compared to standard fan-shaped nozzles ○ Slightly larger foreign object passage diameter and average particle diameter compared to standard fan-shaped nozzles ○ Composed of three parts: spray tip, cap, and adapter For more details, please contact us or download the catalog.

Our company proposes a "Dust Control Fog System" that matches the site through meticulous on-site measurements and careful hearings. We use stainless steel piping that excels in weather resistance and corrosion resistance, offering a "header type" that can be used for a long time and a "fan type" with spray nozzles arranged around factory fans. We utilize various nozzles to match the site. You can also rely on us for automatic spray control, such as sensor spraying. We achieve both dust suppression effects and water conservation. 【Features】 ■ A lineup of spray nozzles and control devices suitable for the site ■ Capable of dust control in large spaces ■ Excellent effectiveness in preventing airborne dust and dust generation (proven to reduce dust concentration by 90%) ■ Outstanding energy-saving and water-saving effects ■ Establishing a dust control system suitable for the site through meticulous on-site measurements and careful hearings *For more details, please refer to the PDF document or feel free to contact us.

In addition to easy piping fixation using a spring clip, the "INQB" series allows for one-touch replacement of the nozzle body and enables spray direction adjustment of up to 50 degrees, achieving both improved work efficiency and flexible spray settings simultaneously. [Features] - One-touch piping connection: Easily secured to piping with a spring clip, allowing for quick installation. - Adjustability of spray direction: The ball joint allows for flexible adjustment of the spray direction up to 50 degrees. - Easy replacement of nozzle body: The nozzle can be replaced with one touch, making maintenance easy. - Improved work efficiency: Easy installation and adjustment enable quick setup of the spray system.

The "CBIM" series and "SCBIM" series are compact two-fluid general-purpose nozzles. They can spray a very small amount of liquid effectively through control, making them suitable for various applications such as cooling, coating, humidifying, and cleaning. The SCBIM series can achieve the smallest spray amounts, while the CBIM series, which is resistant to clogging and has a total length of less than 30mm, can be used for all these purposes. The "TF-FS" series is a compact air nozzle with a total length of 35mm. It excels in quiet operation and achieves energy savings with strong impact and powerful blowing. The "CVVP" series is a coin-shaped single-fluid nozzle with an extremely thin profile. It can be integrated into equipment without protruding, allowing for installation in tight spaces. *We also have a wide range of other spray nozzles available. For quotes or custom requests, please feel free to contact us with any nozzle-related inquiries. Phone and online consultations are also available at any time.*

Both spray nozzles utilize ceramic chips in the nozzle tip that are resistant to wear from high pressure, allowing for reduced nozzle wear during use. Furthermore, the DSP series can be used up to 20MPa, providing a sharper, razor-like thin and strong impact for cleaning. *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time. https://youtu.be/nD5GsO4-2uY

The "MOMOJet" series is suitable for wire cleaning in wire parts. Reducing the spray pressure causes the nozzle tip to crack, expelling foreign objects and automatically cleaning clogs. This spray nozzle can fully automate nozzle cleaning when combined with a control unit. The "2CP" series is a straight spray nozzle that demonstrates its power in cleaning dandy rolls. It effectively removes paper dust with high-pressure spraying. Since it sprays in two directions, it thoroughly cleans the gaps between the rolls and wires, leaving no paper dust behind. The "VEP" series is a fan-shaped spray nozzle suitable for felt cleaning. It sprays evenly across the entire spray pattern with consistent force, allowing for efficient cleaning without waste, contributing to water-saving effects. *We also have a wide range of other spray nozzles available. For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are also available at any time.

Effectively suppresses the rise of dust in environments such as crushing sites and garbage pits, as well as during the transportation of iron ore, crushed stone, grains, wood, and biomass chips. It not only improves the working environment but also addresses concerns for the surrounding environment and complaints related to dust. Additionally, it is effective in preventing the scattering of fine raw material powders during the transportation and input of raw materials in grain and feed factories. The two-fluid nozzle "GSIM" series suppresses dust with a large volume of mist. The "BIM" series is suitable for environments where fine dust is present, using a small volume of mist. The one-fluid nozzle "VVP" series uses sprinkling to suppress dust, making it adaptable to a wide range of environments. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The structure prevents chips and seals from falling off during removal, allowing for safe attachment and detachment of the nozzle while it remains mounted on the equipment. The "INVV, INVV-SS, INV" series is a spray nozzle that sprays in a fan shape. It has a triangular spray pattern, ensuring an even spray distribution when arranged in multiple configurations. The "INOVVE" series is a fan-shaped spray nozzle that sprays eccentrically to one side. By creating a unidirectional flow when arranged in multiple configurations, it eliminates spray liquid pooling and foreign material residue. The "INVE" series is a fan-shaped spray nozzle that sprays evenly, creating a uniform spray distribution with just one nozzle. The "INVVEA" series is a two-fluid fan-shaped spray nozzle. Its strong impact and atomized mist are suitable for particle removal, making it ideal for cleaning LCD glass substrates and printed circuit boards, as well as for etching agent spraying. The "INJJX, INJJX-SS" series is a spray nozzle that sprays in a conical shape, with the INJJX-Y series particularly designed for etching agent spraying with an appropriate spray pattern shape. *For quotes, custom requests, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The "VVP/VP" and "INVV" series are cleaning spray nozzles with a fan-shaped design that evenly distributes spray during multiple sequences, allowing for water conservation and cost reduction with an appropriate number of nozzles. The INVV series allows for easy one-touch attachment and detachment of the nozzle, significantly reducing maintenance time and effort. The VVP/VP series offers a wide variety of nozzle options, expanding the choices for spray angle and flow rate. For cleaning tunnel-type conveyors, the "ES" series 360-degree rotating cleaning spray nozzle is recommended, as it can wash the entire surface evenly and without inconsistencies. The "KB" and "BIM" series are liquid-saving spray nozzles that spray a very small amount and apply it evenly. The fine mist allows for quick drying of deodorizing liquid, thereby reducing time for the next process. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.

The "VVP" series features a top-tier fluid fan-shaped nozzle that sprays in Yamagata, designed to achieve the most uniform flow distribution when arranged in multiple configurations. The "INVV" series also consists of Yamagata fan-shaped nozzles, allowing for the chip part of the nozzle to be easily attached and detached from the main body, enabling the worn chip to be replaced while the nozzle is still attached, thus reducing maintenance time. The "INJJX" series is a one-touch conical nozzle that sprays evenly in a circular pattern, making it suitable for standalone use. The "VVEA" series is a two-fluid fan-shaped nozzle that emits fine mist with an average particle diameter of 50μm or more, delivering strong impact and thickness, penetrating into fine details for precision cleaning. The "INVVEA" series features a one-touch header that reduces the time required for replacement. The "SLNH-H" series is a single-fluid slit nozzle that distributes a thin liquid curtain evenly, contributing to water and chemical cost savings. The "PSN" series is a two-fluid slit nozzle that sprays uniformly and without variation with high impact. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*

The "INJJX-Y" series features a one-touch detachable conical nozzle that sprays in a circular pattern with a strong peak at the center. Even when the spray pressure is changed, the spray shape remains consistent, making it an excellent choice for etching applications with outstanding stability. Similarly, the "INVVEA" and "INOVVE" series also offer one-touch detachable nozzles, both of which allow for easy nozzle tip replacement, significantly reducing maintenance time. The "JJRP" series includes nozzles made of PTFE and PVDF, designed to maintain a uniform conical spray pattern even at low flow rates. The "JJXP" series features nozzles made of PVDF and high-temperature resistant PVC (HTPVC) for spraying aggressive chemicals. They provide a conical spray pattern with a large foreign object passage diameter, making them less prone to clogging. The "BBXP" series consists of nozzles that spray in a wide 120° circular pattern, allowing for a reduction in the number of nozzles used and cost savings. The "EJX" series includes liquid injection nozzles that promote etching through liquid agitation. The "SLNHK" series features slit nozzles that create a clean liquid curtain without bolts in the liquid flow path, making them ideal for applying etching solutions.

The resin spray nozzles have excellent chemical resistance, allowing for safe use with liquids that are prone to corrosion in metals, such as acids, alkalis, and solvents. Additionally, their lightweight design reduces the burden on equipment and eases the installation and replacement process. Furthermore, they offer cost savings compared to metal options. Available materials include PP, PPS, PVC, PVDF, and PTFE, with a range of products including fan-shaped spray nozzles, full cone spray nozzles, and liquid injection nozzles. The "VVP" series fan-shaped spray nozzles are designed for the most uniform flow distribution when arranged in multiple configurations. The "JJXP," "JJRP," "BBXP," and "SSXP" series full cone spray nozzles are designed to minimize clogging. The "IN" series allows for quick attachment and detachment of the nozzle tip to the adapter, significantly reducing maintenance time. The "AJP" series features an angle type that sprays at a right angle to the liquid flow inlet. The "EJX" nozzle series facilitates the elimination of liquid concentration differences and promotes etching and plating through liquid injection. *We also offer a wide variety of other spray nozzles. For quotes, custom orders, or any inquiries regarding nozzles, please feel free to contact us. We are available for phone and online consultations at any time.*

This is a surface washing spray nozzle designed to efficiently wash away dirt from filter sand in rapid filtration ponds at water treatment plants. It is installed at the end of the piping and generates straight jets radially from multiple injection holes underwater, blowing off and peeling away dirt adhered to the surface of the filter sand, thus preventing the accumulation of dirt. By spraying the straight water flow radially, it demonstrates high effectiveness in cleaning and agitation. The number and position of the injection holes can be customized according to requirements. Additionally, there are spray nozzles such as the "VNP" series and "JJXP" series for cleaning dirt from the surface of sand in sand washing machines (filter sand cleaning machines). *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.

In the surface treatment process of cold-rolled steel sheets, numerous nozzles are used, and during regular maintenance, it is necessary to remove the header for cleaning, replacement, and readjustment, which requires significant effort and time for maintenance. The "INVV-SS" series consists of an adapter part that remains in the piping and a detachable nozzle part, allowing for easy replacement of only the clogged nozzle part, effectively solving the aforementioned problem. Additionally, the nozzle part features a knurled structure that allows for attachment and detachment without tools, eliminating the need to readjust the spray angle during installation, thus significantly reducing the maintenance burden on-site. The spray nozzle has a heat resistance of 150 degrees, making it suitable for use even under high temperatures that would be impossible for resin materials. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*